Ongoing Failed Video Upload

Hi Everyone (:
So I was trying to upload a few videos onto facebook. Two of the videos have been trying to upload now for hours and aren't uploading so I just want to delete and cancel the upload. I have tried force closing and clearing the data on the facebook app and I have turned on and off the phone and restarted it a few times. I can't think of anything else to do?

Hello kaitlynswing,
I was reading your post and I couldn't help but to chime in and assist with your video messaging issue. May I ask are you able to send & receive video messages to other mobile phones? Also, how long are the videos your are trying to upload and what resolution are the videos recorded in? I'm assuming that these are videos that you have taken using your device and are not copywritten, correct? If so then what make and model device do you have?
There are several ways to upload a video to Facebook from your cellular device. One of the most popular ways to upload videos to Facebook is by using a Video Uploader. Here's a link so you can get a better understanding on how it works.
https://market.android.com/details?id=net.eworldui.videouploader&hl=en
In addition to trying this app, I would recommend that you unsintall the Facebook app, reboot the device, and re-download the app onto the device. Once you have done so, retry to upload a video. If the results are the same then please post your findings so I can further assist,
Thank you...

Similar Messages

Lumia 930 restarts after failed video upload to FB

I'm on vacation and the net is slow here 1,5 Mbit/94 Kbit ADSL. My phone fails to upload to Facebook hrough the share menu of the video viewer of Nokia Camera. Worse than that, after the FB app signals back that it failed to upload, the phone restarts.
Any solution? It is slow connection but otherwise reliable. Transferring the video to the PC, and then upload through the FB website slow but flawlessly works.

Hello. Welcome to Nokia Support Discussions. Have you tried rebooting your phone by pressing and holding the power+volume down keys simultaneously for 10-15 seconds and it will reboot automatically? You may also try connecting to a Wi-Fi connection.
Keep us posted.

Failed to upload Videos to Youtube and Facebook

Failed to upload Videos to Youtube and Facebook
Tried 2 videos. Both in portrait, bothe under 10 seconds in legth.
They have a mp4 extension. using the share button cannot upload to facebook or youtube. Tried 3 different WIFI locations and LTE.
Anyone else?

I am recording the video on my Z10 and pressing the share button. I choose facebook or youtube and fill in the appropiate information. Both accounts are logged in correctly. Both fail immediatly (I get a notification in the HUB)

IPhone 5 video upload, YouTube and authentication fail

This stopped working for me - when I switched to Google 2 step authentication,
I cannot log in to my iPhone 5 video upload YouTube authentication. I try my google email, my YT userID, the password, and the generated application password from Google security settings.
Nothing.
I have been using the email upload.
Anyone?

Here is the answer:
http://productforums.google.com/forum/#!topic/youtube/y9dmQdltjs8

Behance plugin fails to publish to WIP. Returns following error: "Failed to upload a WIP update to Behance: Invalid permissions or request type"

Behance plugin fails to publish to WIP in Lightroom 5.6. Returns following error: "Failed to upload a WIP update to Behance: Invalid permissions or request type". (I also saw this question asked in the Deutsche forums in Jan 2014 with no answers)
In Behance settings Adobe Photoshop Lightroom has permission to:
Revoke Access
may act on your behalf to comment, follow users, view and appreciate projects
Allows access to read network activity feed
Able to read collections you have marked as private
Ability to create, manipulate and delete your collections.
Able to read works in progress marked as private
Able to post, manipulate and delete a work in progress on your behalf
Does anyone have a solution?
-------- System Settings ---------
Lightroom version: 5.6 [974614]
Operating system: Windows 8.1 Business Edition
Version: 6.3 [9600]
Application architecture: x64
System architecture: x64
Logical processor count: 8
Processor speed: 3.0 GHz
Built-in memory: 16301.9 MB
Real memory available to Lightroom: 16301.9 MB
Real memory used by Lightroom: 374.4 MB (2.2%)
Virtual memory used by Lightroom: 346.3 MB
Memory cache size: 224.4 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 2560x1440
Installed Plugins:
1) Behance
2) Canon Tether Plugin
3) Costco Photo Center
4) Facebook
5) Flickr
6) Leica Tether Plugin
7) Nikon Tether Plugin
Config.lua flags: None
Adapter #1: Vendor : 8086
Device : 412
Subsystem : 5b01028
Revision : 6
Video Memory : 0
Adapter #2: Vendor : 10de
Device : fe4
Subsystem : 5b01028
Revision : a1
Video Memory : 7c1
Adapter #3: Vendor : 1414
Device : 8c
Subsystem : 0
Revision : 0
Video Memory : 0
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: Uninitialized
CardID: 1042
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: Intel(R) HD Graphics 4600
ShaderModel: 11.1
Vendor: Intel
VendorID: 32902
Version: 8086:0412:5b01028:0006

Behance Plugin for LR not Authorizing in LR 5.6

Hi I am having trouble expiring iMovie projects to YouTube in 720p it works some times but it fails to upload most of the time

Hi I am having trouble expiring iMovie projects to YouTube in 720p it works some times but it fails to upload most of the time

A work around is to export from your camera roll.
So export the video to the camera roll.
Go to Photos app,
and choose export (the arrow pointing out), and choose to go to you tube form there.
It tends to be a little more reliable.
Hope that helps!
Also please tell Apple:
http://www.apple.com/feedback/imovie_iOS.html
They tend not to care about a few things being busted in their equipment, but might fix it if enough people complain.

Video uploading from DV camera no longer breaks into scenes

When I first started using iMovie 4 my video uploaded as it was supposed to, breaking into distinct scenes on the clipboard. For about a year now iMove stopped uploading correctly and began uploading video only in large 9 minute blocks. This is obviously not very convenient when you want to quickly find a scene. I would like to understand why this might have happened and how I might restore the correct function.
My preferences have "Automatically create new clip at scene break" checked. What could be wrong?
Frustrated!
Richard

Have you actually checked the footage you are importing to see if there is data and time date stamped in the footage? This is to check to see if the date stamp is ok and a problem with iMovie or if there is no date stamp (or one long continuious one across all the footage) in which case iMovie is acting normal and you have an issue with your footage, video camera, etc.
Patrick

Still can't get good, crisp, video upload and export

I have read the HD express manual, read the articles by Ken Stone and my video uploads are still not that crisp. When I export the MOV to my desktop it looks perfect, every detail. My original video is crytsal clear, beautiful, but when I upload it to "My Space" it looks a bit fuzzy or flat. Now I know what you're going to say, "it's MY SPACE, but you know what, it's not. There are plenty of very clear and crisp videos from musicians and music videos on MY SPACE that are clear as day and crisp - so I don't agree it's MY SPACE. My Space allows for .MOV/Quicktime uploads - 100MB. I tried H.264, still looks flat and washed out. I tried Sorenson, still looks flat. What's confusing me is the frame rate and key frame rate I should set it at for a simple 320 x 240 upload and all the other detailed settings that are optional. What are my best option, step by step. I have exhuasted myself with this - up until 2 a.m. for 4 days. Please help. I have tried so many options. Thank you for your time. Sheila

Sheila,
What is the source of the original video (original capture from DV camera, Quicktime video, rip from DVD ...)? What settings are you using when you export to your Desktop as a MOV? When you say it's crystal clear, what are you watching it on? Is the MOV file what you are uploading to MySpace, or are you doing a different export for uploading; if so, what settings are you using for that export?
What versions of FCE and QT do you have installed on your Mac? And what are the model & specs of your Mac?

Iphoto fails to upload book in the store. Always worked before. The book has 96 pages. Please help!

Iphoto is unable to upload my new photo book in the store for printing. I have done it several times withouth problems. Keeps giving me the same error message "...failed asset upload...cancel order or try again". tried 10 times. Also done preview and saved as pdf. The book is 96 pages, I read max is 100.
Can anybody help please.!!??
A poor Roman husband trying to print abirthday gift...

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT

How can i get a full url of video uploaded in asset library on sharepoint 2013

Hi All,
I have videos in SharePoint 2013 Asset Library, now i want display that videos in my SharePoint webpage as a webpart.
Now, how can i get a full url of video uploaded in asset library?
Thanks in Advance!

The Asset library does a pretty good job of hiding the full URL. An "asset" item is actually a folder. The folder contains the video and support files like preview thumbnails.
So, if you upload a video named butterfly.wmv to http://yourSite/sites/demo/Assets the path to the video would be http://yourSite/sites/demo/Assets/butterfly/butterfly.wmv. If the user changed the name while uploading the file to "Pretty bugs"
the URL would then be http://yourSite/sites/demo/Assets/Pretty%20Bugs/butterfly.wmv.
Probably the best way to explore these hidden folders and discover the "real" URL is to use SharePoint Designer 2013.
Launch SharePoint Designer and open your site.
In the Navigation area click "All Files". (If you don't see All Files then your administrators may have partially locked down SPD.)
In the list of files and folders click the Assets library.
Find and click your video (you will see the "Name" as entered in the file's properties, not the file name.)
Find the video file, right-click it and click Properties.
Copy the Location.
If you just want to display the video in the page:
Edit the page
Click INSERT
Click Web Part
From the Media and Content category select Media Web Part and click Add.
Edit the web part (click the web part's dropdown)
From the MEDIA ribbon click Change Media
Click From SharePoint and navigate to your assets library and pick a video
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Need help with video uploading in flex 4

hey guys... so i need to create a video uploading application... with video chunking...
basically i need to break up the video file (may be 1Gig or more in size) in pieces and send it to the server using a method i call from my webservice...
any ideas??
i believe this process is called chunking... not sure how to do this...
thank you very much in advance!!!

dude. some time itunes just doesnt support drag and drop techniques . just try the simple copy and paste(ctrl(c+v)). if that file is gonna be played on the ipod u get a small tab box in the itunes that the file which u r copying is being processed .
even if this technique doesnt work , then thats a faulty format . u can try another video converter . say videora or Aplus video converter . u will find them in www.download.com

Why isn't my iMovie video uploading to YouTube

Why isn't my iMovie video uploading to YouTube?

Hi, it could be the video incompatible issue. You can try to convert your iMovie video to YouTube supported foramt using a video conversion program and then upload the converted video to YouTube.

How can I stop iCloud photo from looping a failed photo upload?

My mother has an iMac that was mysteriously losing HD space. It turns out that the process called iCloud Photo evidently was trying and failing to upload a corrupt photo that I had inadvertently put in her iPhoto app. Every few seconds a copy of the photo was appearing in the folder named com.apple.photostream-agent. There were 22,000 copies of this photo.
With each failed photo upload attempt, these errors also were logged in console:
1/4/15 7:50:57.709 PM com.apple.photostream-agent[343]: [publisher:didEncounterError:publishingAssetCollections:] Failed to upload asset uqzx6U1gTAi5HumqNsH3YA
1/4/15 7:50:57.808 PM com.apple.photostream-agent[343]: SQL operation failed with code 11
I deleted the photos and restored the HD space after killing the iCloud Photo process in Activity Monitor. Then I removed the photo out of iPhoto.
The problem is that should iCloud Photo restart, say, through a computer restart, the problem starts all over again. Apparently removing the photo from iPhoto did not do the trick.
How can I get iCloud Photo to stop trying to upload this photo?

The problem is that should iCloud Photo restart, say, through a computer restart, the problem starts all over again. Apparently removing the photo from iPhoto did not do the trick.
Did you delete the corrupted photo from its event and from My Photo Stream as well? Have you deleted the photo completely by emptying iPhoto's Trash and the System Trash?
You could also try to delete the photos from the folder ~/Library/Application Support/iLifeAssetManagement/assets/sub/
That will remove the temporary copy of "My Photo Stream" on the Mac from the user library.
The user library is hidden by default. To open the hidden User Library:
Use the Finder's "Go" menu.
Click "Go", then hold down the options key, until you are seeing "Library" in the drop down menu appear and click it.
In the Finder window that will open navigate to the folder ~/Library/Application Support/iLifeAssetManagement/assets/sub/.

Plug ins for adobe after effects failed to upload, please re-install.

Yesterday 1/21/15 when I started up adobe after effects I got an error message that said plug ins failed to upload, please re-install plug ins. I am on a PC windows 8. I am a subscriber to after effects and have been for more than a year. This is the first error I have encountered. Can anyone tell me where to find the plug ins and how to install them?
Thanks,
Shannon

Sorry, I was at work, now I am back at my computer. This is the error..sorry it picked up the picture from the other monitor, of course I never tire of the grand

Videos uploaded on SharePoint do not play on MAC OS

Hi,
We are facing an issue wherein we notice that any video uploaded on SharePoint 2013, does not play on MAC OS. It continues to remain in the "Loading" state and does not start playback. Moreover an authentication window is prompted behind the safari
browser window, entering credentials into which does not prove any helpful either.
I've already gone through this blog and believe this is a standard issue.
http://blogs.technet.com/b/sharepoint_me_in_the_right_direction/archive/2014/01/23/playing-windows-authenticated-sharepoint-2013-videos-from-mac-os-x-device-and-safari-browser-_2d00_-solution.aspx
We already have in place one of the solutions (e.g. blob cache), described in this post, but it has not helped to resolve this issue.
Any suggestions would be highly helpful.
Thanks -
Girish

Hi Girish,
According to your description, my understanding is that the video cannot play on Mac OS which was uploaded to SharePoint.
I recommend to use HTML5 code to embed the video in SharePoint and then it can play on Mac OS with Safari browser.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/4803449a-19b2-4479-8745-d33e692202ae/video-in-web-part-wont-play-on-a-mac?forum=sharepointdevelopment
More reference:
http://blogs.office.com/2013/03/08/enhanced-video-experience-in-sharepoint-2013/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Ongoing Failed Video Upload

Similar Messages

Maybe you are looking for