Ongoing issue: Error 1321 during the patch installation

I have seen this issue with 10x and 11x, however currently I'm working on 11. You can look at my previous posts to see additional details because I have posted about this issue in the past with no luck on obtaining a good answer. Luckily I now have more details and pinpointed the issue down to only patches. When installing a patch, the msp and Mcafee On Access scanner conflict because On Access scanner is scanning the file the same time the msp is attempting to modify the file, this results in the msp reporting Error 1321 (security permissions error). This has only been seen on Windows XP. I have never seen this occur when installing the main Adobe Reader installation, only on patches (msp's) and in this specific case it's the 11.0.03 patch. The obvious solution here is disabling Mcafee On Access scanner (which I have confirmed resolves the issue) however that is not an option in my environment. We refuse to leave the machines vulnerable during an installation. A case was opened with Mcafee and their engineers could find nothing that Mcafee was doing out of the ordinary and could find nothing proving Mcafee was doing anything incorrect on their side, they have requested Adobe look into this issue to find root cause. The bad news is that Adobe Reader is a free product therefore there is no premier support that I am aware of, which leaves me with this forum. This does not happen for other installations as often as it does for the Adobe Reader patches. It does not happen every time the patch is installed but it happens very often and the file reported with issues is different every time. My question is, does Adobe have any thoughts on why this could be happening so often for their patches (msp's)? Is there something being done out of the ordinary? Please feel free to let me know if any additional details are needed.

Hi,
The installer launches the MSI engine. From that point on, interactions between the MSI engine, the system, and other processes (all of which are not under Adobe's control) control the installation workflow--these processes include antivirus and backup programs. Adobe has worked with certain software companies to mitigate such issues, but in this case it may be true that both Mcafee and Adobe are doing the right thing and that it's up to the admin to make them play together nicely.
Obviously, the reason this is not always an issue is because Mcafee is not always scanning in-play files. The coincidence of time and files is seldom, and so the problem appears sporadic.
You must temporarily suspend scanning or keep retrying until success.
hth,
b

Similar Messages

Adobe Flash Player 10.1 issues, errors with Quickbooks Pro 2010 installation

I recently - uh today - had an agonizing experience installing Quickbooks Pro 2010 because I kept receiving error messages during the Quickbooks installation. It was a new cd that I had purchased a few months ago from Costco, and had been putting off using it, or even installing it.
So today, I tried to install it, and failed repeatedly. I kept getting the same message, Adobe Flash player file is unavailable - with a drop down screen showing the location of the flash player file that the installation software was trying to find so it could continue the installation. I think I recall seeing an error message originally with Adobe Flash Player 10.1, but it's been a long day, so maybe the error was always referring to Flash Player 8.0. I tried to browse for a new location that the Flash Player file might be located, looking through the Program Files\Adobe and coming up with nothing.
I spent a long time looking through the discussion forums on both Quickbooks and Adobe trying to find the answer, also turning off and on my computer, ha. And I installed the latest Flash version, Flash Player 10.1, then uninstalled it and then reinstalled it, and then uninstalled it and looked for the obsolete Flash Player 8.0 which I couldn’t find on Adobe’s website, but found links to in two other forums…So basically, I tried to solve this on my own, and it didn't work.
So...I was whining to a friend who suggested I just call Quickbooks technical support. Duh, why didn't I think of that? I guess because the packaging on the new software says that fees may apply if you call customer service. Well, it doesn't apply to the first call, and also it's crazy to charge someone who can't even install the program. So I called them, and was on hold forever.
But the problem was solved.
The tech support person, Manish, was able to install Quickbooks by completely bypassing the usual installation procedure. He checked for compatibility, which was fine, I have Windows XP, etc. and then I believe went to control panel, add or remove programs, and clicked on add programs, and followed the icons with the Wizard to install the latest version of Quickbooks. The interesting thing here is that QB has some special download to allow remote access during a trouble shooting call. It initially freaked me out, but it worked just fine, since I could see what was happening on my computer screen even though I wasn't the one operating the computer.
I asked Manish why this installation method seemed to work. He said some of the Quickbooks cds have a bad Flash Player program file, and doing it this way seems to bypass it. He also said that Quickbooks should not compatibility issues with Flash 8.0 or Flash 10.1, but there were some problems noted with Flash Player 9.0. I asked if I would have problems if I uninstalled Flash Player 8.0 and then reinstalled 10.1. He said there shouldn’t be problems, so that’s what I just finished doing.
Hopefully this is helpful for someone else out there in cyberland.
Also, it was kind of helpful, someone else posted on another forum that you could check what flash files you have by going to C:\Windows\System 32\Macromed\Flash, because I couldn’t even find where the Flash Player was installed. They are not in the Program files under Adobe.

Hi, well that sounds like quite an ordeal. Your Flash files are located in C:\Windows\System32\Macromed\Flash Open Flash with a right click and post back all files listed there. It may be a good idea to just confirm that they are correct.
Then Using Internet Explorer, go to Tools, Manage addons and Toolbars & Extensions and look for a box Show all add ons.
You should find Shockwave Flash Object..ActiveX Control..Flash10h.ocx and make sure it is enabled.
The Flash files and that ActiveX Control is Flash Player.
Now if you use another browser, you may want to post that version info as well. Also, what service pack do you have with XP?
Thanks,
eidnolb

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly compo

adobe reader issues windows 8 Error 1935.An error occurred during the installation of assembly component {B708EB72-AA82-3EB7-8BB0-D845BA35C93D}. HRESULT: 0x80070422.
I have tried many things to try to install it and I have been unsucessful. Please help I have windows 8 64bit.

This did not resolve my issue, it actually made things worse. I did what
you had told me to do below, and it did not work. Tried to access the
internet to respond back to you and my computer was not able to reach the
internet. Tried reaching adobe support and not was able to, even tried
calling was on the phone for 20 minutes and no one answered. I was not able
to re install windows. Contacted Asus from another computer and they were
not able to help me reinstall windows They had asked me to ship my computer
back to them, due to them not being able to resolve the issue and help me
reinstall windows. I luckily had a backup on my external hard drive and was
able to reinstall windows 8. Spent over an hour and half trying to fix
that. Here I am still not able to install adobe reader. I was very unhappy
with what I was told to do and it gave me this issue.
· Open an Administrator command prompt: Right-click Start > All Programs >
Accessories > Command Prompt and select Run As Administrator. Click Allow
for the elevation prompt
· In the command prompt, type the command below:
fsutil resource setautoreset true C:\
The line above assumes that C: is the drive in which Vista is installed. If
it is installed on another drive like D:, change the drive letter
appropriately.
· Restart the system.
· Install Acrobat or Adobe Reader again.

Error occurred during the installation of assembly 'Microsoft.VC80.CRT... blah blah.. HELP!

I've been getting errors completely randomly.. I've yet to DL Itunes until recently and as I tried to start it up (with a seemingly perfectly fine installation I get this fat *** error.. error is as follows below.
An error occoured during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version=8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to HELP and Support for more information. HRESULT: 0X80070216
^This was a pain in the ******* to rewrite as it wouldnt let me copy and paste. Please help me : /

See Troubleshooting issues with iTunes for Windows updates.
tt2

I had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.

i had to reinstall my itunes, and it wont reinstall, instead saying there was "an error occurred during the installation of assembly microsoft.vc80.crt.type = win32 version 8.0.50727 6195 public key token 1fc8b3b9a1e18e3b processorarchitecture = x86.
I have taken all apple products off my computer per other suggestions, I have run malwarebytes with no viruses found, and have even tried installing itunes as a different user on my computer but get the same message everytime.

See Troubleshooting issues with iTunes for Windows updates.
tt2

An error occurred during the installation of assembly 'policy e0.Microsoft.VC80.CRT.type="win32-policy" version "8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'. Please refer to Help and Support for more information. H

An error occurred during the installation of assembly 'policy 80.Microsoft.VC80.CRT.type="win32-policy" version+"8.0.50727.4053", publicKeyToken="1fc8b3b9a1e18e3b" ,processorArchitecture="amd64"'. Please refer to Help and Support for more information. HRESULT: x...
Encountered during reinstall of iTunes. Any ideas?

It is a big issue for many users. There is no clear fix yet, but some users have had success with some of the solution on this thread.
https://discussions.apple.com/message/16751339#16751339

When i download itune then An error occurred during the installation of assembly 'Microsoft CRT.version="8.0.50727.4053".type="win32".publicKey Token="1fc8b9a1e18e3b".processorArchitecture="x86"'.Please refer to help Suppport for more information.

when i download iTunes during downloading process on messege shown:
An error occurred during the installation of assembly‘Microsoft CRT.version=”8.0.50727.4053”.type=”win32”.publicKeyToken=”1fc8b9a1e18e3b”.proce ssorArchitecture=”x86”’.Please refer to helpSuppport for more information. HRESULT:0x8007054F
when click ok it rolling back and start process download again. and at last this messege appear: Service‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that youhave sufficient privileges to start system services with option
Abort Retry Ignore
i tried all option one by one but i did not success to download itunes. i don't have mcafee security. i have zonealarm security.
please guide me for download itunes in my pc.

Did you read threads "more like this" on the right side?
Yes there are issues and tips on resolving install errors.

Error 1935 - Adobe Reader (11) - An error occurred during the installation of assembly component - Windows 7

NOT RESOLVED
It seems to be a problem with my windows installation. I will re-install at a later date since installing PDF viewing programs the only issue.
Problem:
While installing Adobe Reader XI using the install_reader11_en_mssd_aaa_aih.exe from Adobe Reader Install for all versions and AdbeRdr11000_en_US.msi from a forum post on here. Error 1935 occurs using both installers and causes the setup to fail and initiate rollback.
Additional information:
In Programs & Features list there is no adobe reader as you can see:
This is pretty much a clean install of windows on which I have installed: Adobe Flash Player (16), Steam + some games, Chrome, Skype and some Visual C++ Redistributables, .NET Framwork, Drivers for GPU, CPU, Motherboard and USB devices.
Error:
Error 1935. An error occurred during the installation of assembly component
{B708EB72-AA82-3EB7-8BB0-D845BA35C93D}.
HRESULT: 0x80070308
System:
Windows 7 x64 - installed on a SSD.
Motherboard: ASRock Z97 Extreme 4
GPU: Gigabtye - G1 Gaming GTX 970
CPU: Intel Core - i7 4770K @4.00 GHz
RAM: 16GB Kingston Hyper X (8x2)
Steps taken:
1. I have cleared the transaction log using command prompt with the following command:
fsutil resource setautoreset true C:\
Restarting the computer and trying to install Adobe Reader 11 results in the same error.
2. Restarting the computer, disabling Malwarebytes Anti-Malware and installing Adobe Reader 11 results in the same error.
3. Chrome has "allow all sites to run JavaScript" checked.
Thanks
Edit:
I have attempted to install an earlier version (10.1.4) of Adobe Reader - Same error occurs.
Edit 2:
I'm going to look for some alternatives for the mean time
Edit 2.1:
These alternative programs are failing to install as well. Multiple errors, I now assume the issue is with my windows installation.

Hi Kanker ,
Please refer to the following link and see if it helps.
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Let us know with your response .
Stay well.
Regards
Sukrit Dhingra

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM   VSZ RSS TTY      S STARTED         TIME COMMAND
oracle     1353 0.6 27.2 601M 555M pts/2    S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root       3033 0.0 0.4 10.4M 7.7M pts/0    R + 10:59:44 0:00.06 ps aux
oracle     1351 0.0 0.0 2.46M 320K pts/2    I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle     1277 0.0 0.0 2.48M 312K pts/2    I + 09:02:44 0:00.04 -ksh (ksh)
root       1269 0.0 0.0 2.56M 232K pts/2    I    09:01:23 0:00.01 -sh (sh)
root       1268 0.0 0.0 5.31M 768K ??       I    09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL   08:45:31     0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31     0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

An error occurred during the installation of assembly

TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.SqlServer.GridControl,fileVersion="11.0.5058.0",version="11.0.0.0000",culture="neutral",publicKeyToken="89845DCD8080CC91",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x80131018.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK

Hello,
I would try to download the media again, copy to a folder on a local drive, unzipping the content of the ISO file, and
running SQL Server setup from there. The 0x80131018 error makes me think this issue is related to a corrupted media as explained on the following thread:
https://social.msdn.microsoft.com/Forums/en-US/5b49d1c7-8d97-404e-8bc0-5008b40235b9/sql-server-2012-installation-error?forum=sqlsetupandupgrade
If the installation is still not successful, please share with us the Summary.txt log file created by SQL Server setup
program. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702.aspx (choose appropriate version)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

An error occurred during the installation process: error occurred while installing additional adobe

I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB.   Any one else with same issue?   Trevor

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

An error occurred during the installation of assemble, an error occurred during the installation of assemble

an error occurred during the installation of assemble
microsoft.vc80.crt,type=''win32'',version=''8,0.50727,4053'',publickey token=''1fc8b9a1e18e3b'',process
or architecture=''amd64''.please refer to help and support for more information,hresult:0x800736fd.

Hi,
You may disable antispyware and antivirus software or remove adware or spyware from your computer and then install Acrobat or Adobe Reader as BrianD_22932 mentioned.
As I known, a certain type of adware running on the system can cause 1935 errors.
I would like to suggest you remove adware and then install Acrobat or Adobe Reader.
1. Start the Task Manager.
2. Look at the Processes tab. Look for a process named wtoolsa.exe.
3. If this process is running, then you remove this adware.
4. Install Acrobat or Adobe Reader again.
In some cases, the 1935 error results from orphaned registry keys from a different version of the .NET Framework than the one being installed. Uninstalling the .NET
frameworks, removing orphaned registry keys that can remain, then reinstalling the .NET Framework can help in this situation.
Regarding the error 1935, it seems this is a general Acrobat related issue, I would like to share the link below with you:
Acrobat X installation freezing windows 7
http://forums.adobe.com/message/3292028
Please follow the steps from the link above to fix the issue.
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Error 1935: An error occured during the installation of assemble component. Acrobat XI

I currently have Acrobat Professional 9.5.4 loaded and attempted to load Acrobat Professionl XI on a Windows 7 box. When I do, I receive the below error:
Error 1935: An error occured during the installation of assemble component. {76C3F0F6-9B9D-35DA-81C6-CA8A88CC93CA}
I've tried a few things to resolve the issued with no success. I've tried:
1) setting the RegistrySizeLimit to 4294967295
2) Installed .net Framework 4.5 (upgraded from 4.0)
3) Clearing the transaction log via command prompt (admin level)
I have over 20 users that need the program and performing a new OS load is not an option.
Heeeeelp!!!!!

If you had to activate AA 9, deactivate it before proceeding, then uninstall it (though the install should also do that). Then run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up the registry for Acrobat. Also, remove any left over parts of the Acrobat folder. Reboot and do an install. Be sure to log in as the administrator and disable anti-virus. Maybe these steps will help. Let us know what else you run into. After the install (if successful), you will need to install the updates. Best to use the Help>Updates if possible.

Error 1935: An error occured during the installation of assembly component

I am attempting to install SAP Crystal Reports for Visual Studio 2012.
The installation (which was initialized with elevated permissions) fails near completion, with the following error message:
Error 1935. An error occurred during the installation of assembly component {844EFBA7-1C24-93B2-A01F-C8B3B9A1E18E}. HRESULT: 0x80073715.
OS: Windows 8.1 64 bit
Visual Studio: VS 2012 Ultimate
.NET Framework: 4.5 with 3.5, 3.0, 2.5, 2.0 all enabled
SAP version: 64 bit 13_0_7
If anyone has had a similar issue and can help, or if there is an official fix from Microsoft out there that someone can point me to, I'd greatly appreciate it.
-Amanda

Hi,
About error 0x80073715, I found the acticle. Wish it will help you.
http://support.microsoft.com/kb/2643995/en-us
If it can't solve your issue, I suggest you post your issue to the related forum.
http://scn.sap.com/thread/3185805
Best Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Ongoing issue: Error 1321 during the patch installation

Similar Messages

Maybe you are looking for