Ongoing problem with Select File Window on CS4

For a couple of years, I have been experiencing a pesky problem with the Select File window. Whenever I go to insert an image or update the path to an image on an dynamic page (.asp) , the Select File window opens up and looks really strange. The File System list is hovering above the Data Sources list (see below) and the Data Sources radio button is the default. If I tick the File System radio button, I can select a file, hit okay, but it will not actually change or insert that file. What I have to do is tick File System, select an image, select a different image, and then I can select the original image. Its the strangest thing and it is a real thorn in the side. BTW, it is not just my installation... this happened on my old computer as well under CS3 and Windows Vista... it does it now on a newer computer on CS4 and Windows 7. I was talking to a friend the other day and, and it happens to him sometimes too. Has anyone ever seen this?

Not using Application Frame mode. I'm in Standard Screen mode. I have tried to re-size the window by pulling the bottom right-hand corner down and out, as I indicated in my original post, and that is the core issue of my problem. When I pull the bottom right-hand corner down and out, it starts to work normally, but very quickly snaps back to the original size and my mouse is left "hanging," so to speak. I go back to the corner, try again, snaps back again. But if I do it very slowly, such as start by dragging the window to become SMALLER! then continue with the dragging by looping it out to then become larger it doesn't snap back!
Not using sides of the window to adjust window size, though that works. Advantage of using the lower right-hand corner is that I can adjust both side and bottom of window at once in one quick action. At least that's the way it worked for me since Photoshop 3!
I do often work in Full Frame mode, but when I want to pull in layers from other open files, it's nice to see everything I have in separate windows. Often, it is very helpful for me to adjust the size of the window to increase the gray area, when I want to free transform a layer that is larger than the image size. Also, I often like to see the image surrounded by the pure gray space, and not bounded by the distracting edges of the window.
I hope I'm making sense...

Similar Messages

Ongoing problems with newest Mac Pro and CS4

Hi all,
I've just switched from a Final Cut Pro editorial house to a new company that bases production around the Adobe Production Suite using Premiere Pro CS4 for all our editing needs. From what I understand about this company (and this workstation) is that Premiere Pro CS4 has been buggy on this machine and this machine only. I find this strange as it is one of the newer high end mac systems available right now and is more than capable of crushing most video that will be put into it.
In brief a summary of the problems include;
1.) Final exports rarely work, no matter the codec, bit rate, size, duration, etc.
2.) If AME CS4 does manage to successfully export a piece it will generally have random black frames right at every cut starting about halfway through the piece.
3.) Even so much as switching sequences within a project manages to bog the system down and crash it, thus making me have to force quit the program and occasionally restart the machine.
4.) After rendering the work area the machine suddenly becomes unresponsive and thus causes another crash/force quit scenario.
5.) Certain audio tracks will play for about 2min and 30seconds and then mysteriously go silent, while a clear and present waveform is able to be seen (however occasionally premiere will cut this part of the clip off!)
I will post the hardware and software specs below but I feel it is necessary to detail why I find these problems to be extremely peculiar.
Firstly the projects we have are generally shot on the 5D MkII. I understand CS5 has the ability to play these clips back through it's mercury playback system (after it's own internal conform) at real-time and allow you to edit as if it had been transcoded traditionally. We are planning on obtaining a copy of CS5 in the near future but I am currently worried if these problems may be associated to faulty hardware.
Upon my arrival I formatted every drive and did a clean install of OSX Leopard 10.6.5 as well as a fresh install of Adobe Production Premium CS4 (updated to most recent release). This leaves out any possibility of a plug-in such as the red giant filters or sapphire filters interfering with the rendering and exporting process. Nothing seems to work. Even throwing an uncompressed 8-bit clip into AME CS4 manages to crash it.
A coworker of mine had two great ideas on the problem the other day for me to test out. The first being that it could be a bad piece of ram. I figure this could be a possibility as I don't know the history of this machine and I noticed all the RAM slots are full of 1gig sticks (and two 4gig sticks) so there could be a bad one in the bunch. I went through the process of elimination leaving one stick in at a time and testing an export (extremely time consuming) and every time it failed. His second idea was to take my project file and associated media to the creative directors computer which happens to be a two year old Mac Pro running CS4 (on OSX Leopard). He has several plug-ins installed along with tons of additional applications etc etc. Sure enough I loaded up my project file consisting of a bunch of 5D MkII footage and it played back perfectly, exported perfectly, tabbed through sequences perfectly, and did everything it should!
My question is why. Why would his older machine work with this footage on the same version of Premiere Pro CS4 and not my newer, faster, shinier editing machine? I've done everything I can to test any theory I've come up with both from my own experience as well as through internet research. Deleted PList, emptied RAM, emptied Cache, reformat and reinstall, swap RAM around, tested different hard drives, etc. The problem is not isolated strictly to the H.264 files the 5D MkII produces either, as even the uncompressed 8-bit files I've brought in won't play nicely with the system either. It's such a bummer that my first experience with Premiere Pro had to be on a machine that has these horrible quirks but I feel it has a lot to bring to the table over Final Cut Pro and I would love to find a solution to this problem so I can get back to cutting!!
Thank you in advance for all of your help!
System Specs (Hardware)
-Mac Pro 5,1
--2 x 2.93 GHz 6-core Intel Xeon
--14 GB 1333 MHz DDR3(all tested OK)
--ATI Radeon HD 5770 (also tested with a new nVidia card as well)
--(Internal) Operating System Hard Drive - 250GB 7200 RPM
--(Internal) Project File Storage - 1TB 7200 RPM
--(Internal) Preview File Storage - 500GB 7200 RPM
System Specs (Software)
-Mac OSX Snow Leopard 10.6.5
--QuickTime X v10.0 (118)
--QuickTime 7 Pro v7.6.6 (1710)
---QuickTime Version 7.6.6 (1756)
--Adobe Premiere Pro CS4 v4.2.1 (003 (MC: 166418))
--Adobe Media Encoder CS4 v4.2.0.006
Example Sequence Settings and media for a usual Project File
-Media
--24GB of 5D MkII footage (1920x1080P 23.976 frames/second H.264 files straight off the card)
--2GB of sync sound (.WAV)
-Sequence Settings
--Editing Mode: Desktop
--Timebase: 23.976 frames/second
--Frame Size: 1920 horizontal 1080 vertical 16:9
--Pixel Aspect Ratio: Square Pixels (1.0)
--Fields: No Fields (Progressive Scan)
--Display Format:24fps Timecode
--Audio Sample Rate: 48000 Hz
--Display Format: Audio Samples
--Video Previews File Format: I-Frame Only MPEG
--Codec MPEG I-Frame
--Maximum Bit Depth (Unchecked)
--Maximum Render Quality (Unchecked)
Adobe Media Encoder Export Settings from Uncompressed 8-Bit FILE to High Quality H.264
-Source Clip: Uncompressed 8-Bit 4:2:2, 1920 x 1080 Millions, 16-bit Integer (Little Endian), Stereo (L R), 48.000kHz 23.98, Data Rate of 799.15 mbits/s.
-Format: H.264
-Preset: HDTV 1080P 24 High Quality
--Customized to:
---24fps -> 23.976fps
---Pixel Aspect Ratio: Widescreen 16:9 -> Square Pixels
---Bitrate Encoding: VBR, 1 Pass -> VBR, 2 Pass
---Source XMP metadata turned OFF
Adobe Media Encoder Export Settings for Premiere Pro SEQUENCE to High Quality H.264
-Source Sequence: See above example.
From AME Directly: [File>Add Premiere Pro Sequence>Project>Sequence>OK] (Usually takes a long time to get Sequence section to show up)
From Premiere Pro: [File>Export>Media]
-Format: H.264
-Preset: HDTV 1080P 24 High Quality
--Customized to:
---24fps -> 23.976fps
---Pixel Aspect Ratio: Widescreen 16:9 -> Square Pixels
---Bitrate Encoding: VBR, 1 Pass -> VBR, 2 Pass
---Source XMP metadata turned OFF
Adobe Media Encoder Export Settings for Premiere Pro SEQUENCE to Uncompressed YUV 8 bit 4:2:2
-Source Sequence: See above example.
From AME Directly: [File>Add Premiere Pro Sequence>Project>Sequence>OK] (Usually takes a long time to get Sequence section to show up)
From Premiere Pro: [File>Export>Media]
-Format: QuickTime
-Preset: Custom
--Customized to:
---Video Codec: Uncompressed YUV 8 bit 4:2:2
---Quality 100
---Width: 1920 Height: 1080
---Frame Rate: 23.976
---Field Type: Progressive
---Aspect: Square Pixels (1.0)
---Render at maximum Depth (Unchecked)
---Audio Codec:Uncompressed
---Sample Rate: 48000 Hz
---Channels: Stereo
---Sample Type: 16 bit

The move from FCP to PP is a good one, however, it's only half way there.
Next, move to a Windows 7 64 based machine using an i7 950 and 12 GB RAM at a minimum (with a GTX 460 or better as a seriously considered option), and then upgrade to CS5.
Chances are more than excellent that doing will resolve all your issues.

Problem with save file window

Every time I save an Image or a File in general the window to save is out of screen resolution.
I have a MacBook Pro Retina 13.3
Running Yosemite.
here is an image of the issue
Buttons for save or cancel are gone and I can't resize the dialogue.
I use just enter and esc to do the actions.

yeah I had the same issue and reported in feedback app when in beta. but. still there.
The save dialogue box grows down with every save , and gets out of mouse range, you can hit return and it will save.
Alternatively go to Display under System Preferences rotate to either 90 or 270 degrees. Now try and grab the bottom of the save box
and pull it so it is now at its minimum, this can be a bit awkward re hand eye mouse coordination.
once you've grabbed it and pulled it back up re-rotate to normal.
and then just try to remember to pull the box up again so it don't wander off the screen again.
hope this helps.

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with: select 'c' as X from dual

Problem with 'select 'c' as X from dual'
I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.6.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>
Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> select 'c' as X from dual;
X
c
SQL>

Using 9.2.0.6 On AIX 5.2 I get the single byte result:
UT1 > select 'c' as X from dual;
X
c
If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
Try issueing clear columns and repeating the statement. Are the results the same?
HTH -- Mark D Powell --

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination

Problem with "SELECT...FOR UPDATE OF..." and "POST command" combination
Problem in committing transactions in Multiple Forms (Oracle Forms) with POST built-in command:
Consider that the following statements are written in WHEN-WINDOW-CLOSED trigger of a called form.
Statements in called form (Form name: FORM_CHILD):
go_block('display_block') ;
do_key('execute_query') ;
-- Data from table_b will be populated in this block, based on the value of COLUMN_1 obtained
-- from TABLE_A.
-- Example: If the value of COLUMN_1 is 10, then all the matching records from TABLE_B, which
-- are inserted with value 10 in TABLE_B.COLUMN_1 will be fetched and shown here.
if user_choice = 'YES' then
commit ;
else
rollback ;
end if ;
Statements in calling forms:
There are two calling forms having following statements and it is going to call the above said called form.
CALLING FORM 1
Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...; Statements in KEY-COMMIT trigger:
post;
call_form(form_child, no_activate) ;
CALLING FORM 2:
Statements in ON-INSERT trigger:
select column_1
from table_a
for update of column_1
where column_2 = 'X' ;
update table_a
set column_1 = column_1 + 1
where column_2 = 'X' ;
insert into table_b ...;
insert into table_b ...;
insert into table_b ...;
Our understanding:
Assume that both the forms are running from two different machines/instances, issuing commit at the same time. In this case, forms will start executing the statements written in ON-INSERT trigger, the moment POST command is executed. Though the commit is issued at the same time, according to oracle, only one of the request will be taken for processing first. Assume that calling form 1 is getting processed first.
So, it fetches the value available in COLUMN_1 of TABLE_A and locks the row from further select, update, etc. as SELECT...FOR UPDATE command is used (note that NOWAIT is not given, hence the lock will be released only when COMMIT or ROLLBACK happens) and proceed executing further INSERT statements. Because of the lock provided by the SELECT...FOR UPDATE command, the statements in calling form 2 will wait for the resource.
After executing the INSERT statements, the FORM_CHILD is called. The rows inserted in to TABLE_A will be queried and shown. The database changes will be committed when user closes the window (as COMMIT is issued in its WHEN-WINDOW-CLOSED trigger). Then the SELECT...FOR UPDATE lock will be released and calling form 2's statements will be executed.
Actual happenings or Mis-behavior:
Calling form 2 starts executing INSERT statements instead of waiting for SELECT...FOR UPDATE lock. Also, the value selected from TABLE_A.COLUMN_1 is same in both the calling forms, which is wrong.
The rows inserted into TABLE_B are having similar COLUMN_1 values in calling form 2 and they are fetched and shown in the called form FORM_CHILD.
Note that in calling form 2 also POST only is issued, but the changes posted there are accessible in calling form 1 also, which is wrong.
Kindly suggest us as to how to fix above problem. It will be much use, if you can send us the information regarding the behavior of Oracle Forms POST built-in also.
Our mail ID: [email protected]
Thanks a lot in advance.

You have several problems:
1. On-Insert will ONLY run if you have created a new record in a base-table block. If you haven't done that, then the POST command will not cause it to run.
2. Select for update without a "no wait" will lock records for the first form, but when the second form tries this, it will hit the ORA-00054 exception, and will NOT wait. The only way you could make it wait is to issue an UPDATE sql command, which is not such a good way to go.
All POST does is issues SQL insert or update commands for any changes the user has made to records in a form's base-table blocks, without following with a Commit command.
Also understand that Commit is the same as Commit_Form, and Rollback is the same as Clear_Form. You should read up on these in the Forms help topics.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Problem with the Finder window in Chrome

Hello,
I have a problem with my finder window in Chrome.
Since the window isn't a separate window anymore, but stuck to the top of the webpage, my finder window is too big. I can't read the "Cancel" or "Send" (I have no idea what's supposed to be there in English but I assume it's something like "send" and "cancel") buttons. I have provided some images of the problem, even if I make the Chrome window as small as possible, the finder window still is too big for my screen. I can resize the finder window from lest to right, but not up or down, which is extremely irritating for me.
If anyone can help me how I can solve this problem.
Thanks!

I found the solution on another thread...Here it is.
"I was having the same problem. I found a way to make it smaller. First, I opened chrome and clicked the green button on the window to make chrome go into full screen. Then I tried to save a file to make the finder window open in chrome. When it opened in full screen I could see the bottom of the window so I resized it to make it a little smaller. Once I did this it remembered the size so now I can access the bottom buttons when I take it out of full screen mode. Hope this helps."
Worked like a charm!

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

SFTP MGET of large files fails - connection closed - problem with spool file

I have a new SFTP job to get files from an FTP Server. The files are large (80mg, 150mg). I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time. I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
Is there a limit to how large an ftp file can be in Tidal? How long an ftp job can run?
The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
In the log, the error is that the connection was closed. I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
Below is an excerpt from the log
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed: (code=0)
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException: [errorcode=0]
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal) there may have been a tagent.ini setting that tweaks that but I can't find any details.
We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

We have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions

we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Problems with the File System Repository & User Mapping!

Hi All
I am having a problem with a file system repository, and setting up user mapping for that repository.
I have done the following:
Created a File System Repository
Created a Network Path
Created a System (Including the alias)
Now when I go into User Administration and select my user the is no user mapped systems to select.
All this system is doing is connecering to a folder on our File System.
Any help would be great as this is really frustrating!
Thanks
Phil

I am using EP7 Stack 11 and unfortunately the only options I have are:
user
admin
admin,user
It is currently set to admin, user and does not seem to work!
Phil
Message was edited by:
Phil Wade

Ongoing problem with Select File Window on CS4

Similar Messages

Maybe you are looking for