Onion skinning function disappear after rendering video. why?

how can I save my animation file including the Onion skinning effect. I try to save my animation several times using different saving formats but the result was always the same: (the onion skinning effect is not include).
I also would like to apply onion skinning command to a part of the animation and not for all the duration of time, the command apply to all duration of animation which is so limited. Is there a way to apply only for a apart which can be time or a level. Thanks
Please give me your answer because I really need it.

Onion skin is an aid while you work on a project so that you have a sense of where you are in the fourth dimension. It is not intended to be rendered.
Most video editors offer an effect where 'motion trails.' Photoshop is not a video editor.

Similar Messages

After rendering, video track turns a solid green?

Using FCE 3.5, after rendering video, the audio track works, but the video track is all just a solid green frame. No video whatesover, only green. Any ideas on how to fix this??? Thanks so much.

First, what effect(s) are you applying? Are there settings in the effect that might be turning the video green? Are you trying to chroma key a green screen?
Also, details help. Exactly what model Mac are you using? What version of OS X? What are your sequence settings? What is the source of the video clip? Clip properties? Any other effects you are using on the same clip(s)?

After editing video, why did my changes disappear?

After editing video footage in FCP X, why do my changes, as well as, footage, words, transitions
disappear sometimes? AutoSave is on.

Auto save is always on. first what is your version of FCPX ?

Version FCE 2 after rendering video, playback is jurky about 10 frames at a time. Audio is fine. What is the fix?, version FCE 2 after rendering video playback is jurky about 10 frames at a time. Audio is fine. What is the fix?

I am useing FCE 2. After rendering the video playback is jurky about 10 frames at a time. Audio is fine. What created the problem?

I had been working on the project for a few days. It is mostly pix and a couple videos. It has several scrolling text segments. Everything was going fine, then after a rendering a large scrolling text it started. It appears that it skips 12 frames each time as I'm playing back.
Sequence:
Tracks 3v, 4 A
Vid Rate 29.97 fps
Frame 720 x 480
Comp DV/DVCPRO-NTSC
Data Rate
Pixel Aspect NTSC - CCIR 601
Anamo
Field Dom Lower (even)
Audio Stereo
Aud Rte 48.0 KHz
Aud For. 32 Bit
The video is a clip I purchased off istock (8sec.) of a flag waving
CLIP:
Size 35.9
Tracks 1V
Vid Rate 30 fps
Frame Sz 640 x 360
Comp. Photo JPEG
Data Rate 1.8 MB /sec
Pixzl Aspect Square
Ana
Field Dom. Not Set
Alpha None / Ingore
Rev Alpa
Composite

Why does border effect disappear after rendering? It's visible before.

I'm editing a project that needs a lot of pictures as b-roll. I used the standard border effect in FCP7 and everything looks great! Until I render it. And, then all or a portion of the border disappears. When I toggle the effect off, the border reappears just as it was when I first applied it. Render again, it disappears again. Confused. Any advice would be appreciated.

Thanks for all the input. I figured it out. Pictures were too large. You can all stop typing now.

After Rendering Video turns a different color and looks hazy

I've used Adobe Premiere Pro for about 2 years and I have never had this problem. After I render my video, the color and clarity of my video completely changes. I have only used a sharpening effect and a brightness effect to fix a few details. I also have removed these effects and rendered, and it still messed up the color and clarity. I have tried to reinstalled the program and it didn't help. I have tried to open a new project with some video to see if the rendering issue was just with my project or the whole program and it still did it. So now any video for any project has this issue and I have never experienced this before.
I am wondering if I have hit a hot key that has changed the outcome of my video....
If anyone knows anything about this problem or has experienced something similar, please help me.

I am just rendering files and viewing them in my preview screen to see what I am doing before I export.
This is the properties of one of many clips I am using:
File Path: O:\Alex and Ashley Wedding\07-26-2014 #5\20110103014505.MTS
Type: MPEG Movie
File Size: 315.5 MB
Image Size: 1440 x 1080
Frame Rate: 29.97
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:00:00
Average Data Rate: 1.3 MB / second
Pixel Aspect Ratio: 1.3333
This is the sequence settings:
Editing Mode: DV NTSC
Timebase: 29.97 frames/second
Video
Frame size: 720 Horizontal: 480 Vertical 4:3
Pixel aspect ratio: D1/ DV NTSC (0.9091)
Fields: Lower fields first
Display Format: 30fps Drop-Frame Timecode
Audio
Sample Rate: 48000hz
Display Format: Audio Samples
Video Preview
Preview File Format: NTSC DV
Codec: DV NTSC
Width: 720
Height: 480
I also have tried to reinstall wiping any preferences that may have been accidentally selected, but I still had the problem.
I don't know how to delete the media cache....

No audio output after rendering video in Premiere Pro CS5.5

I have a pretty simple video with 2 audio tracks -- 1 from the GoPro video, the other is a song. Everything plays fine while editing -- but when I export the video, the audio disappears. Is this a bug or are my settings buggered up? See audio settings below:
And here are the video settings:

OK - I tried AME. I imported the PRPro proejct - managed all the settings, pressed "start" and let it sit. Nothing happened -- it stalled and never rendered a single frame. I know, different issue than before.
Back to the previous problem: I am posting my project window for you to check out. I re-rendered it, and same problem.

After Rendering Video Becomes Pixeled?

I'm using FCE and Live Type. I've never had this issue before. I'm putting a lower-third on a music video I'm making. If I stick the livetype file into FCE it shows 'red' at the top indicating it hasn't rendered. If I move the marker to part of the unrendered clip, it looks fine. If I render off to a full quality video (before it does the preview-render) the full quality clip looks fine.
However, if I let it do a preview render, now inside my working area, the text looks pixelated, and if I do a full quality render the text ends up really nasty.
I deleted my render files and re-rendered the previews and the issue still existed.
Any thoughts?

Ok, maybe I'm going to reveal a lack of knowledge here, but where do I find the 'project settings'? I know where the clip settings are.
My Clips are running:
29.97fps
720x480
DV/DVCPRO-NTSC
My LiveTypes are running:
29.97fps
720x486
LiveType Codec Decompressor
My 'Easy Setup' is set to 'All Formats' 'All Rates' 'DV-NTSC 32kHz FireWire Basic'.
The cameras were recorded at 60i.

After rendering video the audio is no longer in sync. Stumped on what's wrong.

I am working on a project similar to others I have done. This is in CS5 with Premiere Pro.
The video is a .m4v at 1080p and 23.976. Audio is 48Hz 16-bit stereo wave.
In editing the audio together I am finding that the further into the video I go the harder it is to get good playback (that's an issue with .m4v files). So I went ahead and rendered the video.
Well now all of the audio is off. I would be forced to redo all of the audio. I have looked at every setting I can think of to no avail. I started a new project and rendered the video right off the bat, but when I placed the synced audio into the timeline, it's off.
I am so stumped I don't even know where to begin. Rendering the video should not change a thing. But it has. Somewhere.
Any ideas?
This project is a personal one. I don't like the terribly cheap and shoddy 5.1 remixes for most Hong Kong martial arts pictures so I rip the BD's and use the audio from my old laserdiscs (LD audio is never remixed). At 16 bit PCM it sounds superb. But natrually it needs to be synced since laserdiscs were transferred from worn out theatrical prints. Some jobs require minimal editing. Somne a lot. Once finished I create a brand new Blu-Ray to enjoy in my home theater. Anal, yes. but it's a hobby.
I have never encountered this audio drift issue before.

In the Finder,navigate to your projec folder. Look in the Shared Items folder. Is there a video ffile inside? Does it play intact?
Russ

Video "Hits" After Rendering

After I render a piece of my timeline and look at it on our studio monitor, I'm getting a good amount of what I would call "hits" in the video, like hits you would see on an old tape that's past its prime. The timeline has a number of graphics layered on top of one another with text and moving jpegs, with a broadcast safe filter on everything.
I've had weird things appear after rendering before, but they've always gone away after rerendering. This time they're pretty consistently in the same spots.
Any ideas about settings I should look into or other work arounds?

I have seen this on several occasions and there seem to be a few causes.
possibilities:
1) you are using the Broadcast safe filter, if the clipping on your images are extreme you get strange green and white artifacts after rendering. Try using the 3-way color corrector to bring levels down before applying the BS filter. Or if the artifacts are occurring on graphics, make adjustments in Photoshop (or whatever program you created the graphics in) and bring them back into FCP. A lot of people create graphics using the full range of RGB colors and luminance values. NTSC video does not have as large of a chroma and luma range as RGB.
2) You are working in an uncompressed 10-bit sequence and applying filters that are not compatible (for lack of a better word) with Apple's 10-bit codec. (Or you are just getting random render problems in 10-bit). I have had many, many render issues in 10-bit that went away by switching to 8-bit. In most cases you can't really see much difference between 8 and 10 bit video anyway, so why go through the hassle or working with it. If you are doing a lot of green screen work, you may want to reevaluate this argument.
I'm sure there are other possible causes for the problems you're experiencing, but these are the ones I've run into in the past.
Graeme Nattress knows a lot about 10-bit issues in FCP, perhaps he can chime in with some suggestions/explanations.

Scale of video in timeline changes after rendering

Hi,
I hope someone can tell me why I'm having this problem: before rendering, my video is adjusted to the frame size in the monitor window. After rendering the video looks all squished at the bottom. The scale and position are off. This has never happened before and I can't figure it out. Help?

Ok, thanks to Eddie Lotter, I now know how to paste in pictures, that's a start.
So, before I render
After
So there you go. In a nutshell, that's the problem I'm having.

Why mouse arrow disappears after I upgraded to osx Mavericks

why mouse arrow disappears after I upgraded to osx Mavericks-==

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?
Your question requires more information. What does MPEG-4 mean to you? What file container and which compression formats are you referring to here? Is the MPEG-4 content "standard" or proprietary. Basically, depending on the file container and the specific content, QT X v10.3 may initiate a conversion ever where the individual data tracks are fully QT compatible. Proprietary compression formats will definitely do this. In some cases, the audio or video in one source container may simply be passed through to the MOV file while in another source container, QT X v10.3 forces a conversion of that same data track. In short, there are too many variables at this point to properly answer your question or attempt to duplicate your workflow.

Why is it not possible to assign a hotkey to onion skinning? (For toggling on/off)

In Flash CS6 when animating frame-by-frame by hand, I'm constantly toggling onion skinning on and off, and the same with the "loop" button right next to it for looping a certain range of frames. Neither of these appears to be assignable to a hotkey, meaning I need to take the mouse/pen away from the drawing and hit these buttons several times a minute, really putting a damper on the workflow.
Might we be able to get this in the next patch? It seems like a no-brainer, especially for a program that many people use for hand-drawn animation projects.

Hi Steve -
Thanks for the info. I have a few more questions...
Andy,
Yes, this is exactly the issue. Currently I am
invoking the UIX servlet not as a registered portlet
but as a hard-coded URL link on the portal page.Are you saying that in order to access the UIX application, the user clicks on a link which navigates out of Portal? If so, is this by design, or did you go this route because of problems creating a portlet for your UIX servlet? That is, would you prefer to have your UIX application run inside of Portal as a portlet, or do you explicitly not want this?
Also, can you provide more background about your deployment environment? In particular, is the UIX application running locally on the same machine as Portal, or remotely on another machine? Is the UIX application running in the same application server/servlet engine as Portal?
The application runs connected to the database but
without the context of the SSO Portal user. I want to
be able to display the Portal username on the uix
pages, have the VPD context in the database
connection (we have striped the tables but it only
works if connected via Portal!!) and potentially have
access to some of the extended Portal functionality
in the JPDK (this last one a "nice to have").Unfortunately I have no idea whether this is possible, so I'm not going to be much help on my own. The best I can do is try to track down someone who can actually speak to this issue. However, given the lack of documentation and the fact that you weren't able to get a solution through support, I wouldn't be suprised to find that this type of integration simply isn't supported yet.
I think you mentioned in the TAR that you had seen support for similar integration with Struts. If you know of documentation which shows how to do this type of thing with Struts, could you point me at it?
Andy

Email icon and function disappears 3 seconds after opening a PDF in Acrobat 8.

Using Adobe Acrobat 8 with updates applied, when opening .pdf files the email function disappears 3 seconds after the file opens. I have had this program in my PC for years, and this functionality worked up until last week when it disappeared.
I have been informed that this program is no longer supported by telephone, and that I need to upgrade to gain access to support.
I have reinstalled the program and the problem persists.
Any suggestions would be appreciated.

Hi Jason,
I would recommend you to do a selected startup and then enable the programs one by one to isolate which program might be causing this.
Please refer the KB: Restart Windows in a modified mode | Windows 7, Vista for selective startup of Windows.
Regards,
Anoop

Why ilife disappear after reinstalling mountain lion?

why ilife disappear after reinstalling mountain lion?

The 10.8.3 update should have left your iLife apps intact - did you do a clean install, erasing your drive? If so, then you should be able to go to the Mac App Store and download the iLife apps using the Apple ID with which you registered your computer.
Clinton

Onion skinning function disappear after rendering video. why?

Similar Messages

Maybe you are looking for