Online drivers and xp
while searching the driver files i have noted that all updates are for xp sp. are ther any updates for xp sp2?
while searching the driver files i have noted that all updates are for xp sp. are ther any updates for xp sp2?
Similar Messages
-
Downloading drivers and such for B85M-E45 online
Hello. When replying, please bear in mind that I have no idea of what I am doing whatsoever.
I am currently setting up my new pc with a B85M-E45 type motherboard. My pc does not have a optical drive since I did not think it would be necessary, and I can see that the stuff I need can be downloaded online, so that is just great. Problem is, I have no idea of which files to download and where to find those. I got two DVDs with the pc, one called Drivers & Utilities, another one called Afterburner I think.
My pc runs a 64 bit Windows 8.1.
Would someone be so kind as to show me exactly what to download from MSI's website?Hello,
You can find all the drivers and utilities >>HERE<<. Just pick your OS and download.
From the "Drivers" section you surely need:
Intel VGA Driver (Only IF you don't have dedicated graphics card like AMD or NVidia)
Intel Chipset Driver
Intel Management Engine Driver+Microsoft hotfix
Realtek PCI-E Ethernet Drivers
Realtek High Definition Audio Driver
And from "Utility" section:
Command Center (worth to have it to monitor and control fan speeds, CPU temps etc)
Network Genie
Fast Boot (if you plan to use FastBoot feature from BIOS)
Anything else you can install but might find useless. Nothing from Utility section is required, but you may find those I have listed to be useful. -
After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try againHi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem
-
What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.
Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?
Checked RoaringApps App Compatibility Table. These are apps not drivers but..
All I see listed is:
- Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
- Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
- Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
http://roaringapps.com/apps:table/tags/_e/index_tags/_e
On the Epson Website. Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
Drivers:
- Printer Driver v8.63
Utilities:
- Remote Panel 2 Utility v1.30
- Uninstall Center v1.1.0
Firmware:
- Firmware Update version KND14BA
Epson Stylus Pro 7700 Printer - Drivers & Downloads
Did you download and install all of these from the Epson website? -
Hello,
I updated Firefox (now the icon is Firefox logo and 45r on my desktop). About the same time, I updated some Add-Ons, as suggested on Firefox website.
Now - when I try to log-in with bank website, I type in my user name - and I get the message 'Your online ID and/or location is missing, Please try again.' Initially I thought that it was the bank web-page - but this has been going on for daaays now, so I suspect it is some setting....
ALSO - I started getting re-routed to a strange web-page (this happens randomly), when changing, going to a link on various web sites. oops. The strange website is 'Net Assistant' and it seems to want to help search, I always back out (frequently this takes a few attempts).
I cleaned the cache, got rid of cookies and mopped the floor- (just kidding on that), and I'm not sure what else to do! eek.
I do not have a specific time - or event to relate these two problems ''to'', but I suspect it is either Firefox 4 (45r?) or one of the suggested add-on updates that I did.
Actually, there is a 3rd, probably related problem: My homepage is NPR (http://www.npr.org/) and whenever I click on Firefox (45r) icon, NPR page loads, but I get a message across the top - under address bar, that says 'Firefox prevented this page from automatically redirecting to another page.'
Not sure what's-up with that either.
p.s. The BofA page has the green 'safe' sign on the address bar.
What a confusing mess. Help!
I need to get online with the bank, so I can pay my bills on time!Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
My solution for No Audio -- Conexant drivers and Windows 7 x64
My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/ About half way down you will find the sub-directory with these files. Just right click each one and save to your desktop.
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C;/swsetup/ This is the directory where HP updates default to.
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file. It did not work the first time -- I missed a line in my cva file. However, I then manually installed the Conexant drivers as follows and voila I had sound, nice crisp clear sound.
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then" Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then Conexant, then "Have Disk" . Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
This question was solved.
View Solution.I thought that I would recompile my answer and then mark this thread as solved since it was not a post about a problem but rather how I solved a very common problem that might be of benefit to others.
My son and I have the L2000 laptop that came with 32 bit XP and used the Conexant chipset for Audio. I had been using an SB Audigy PCMCIA card so I am not sure when Audio was really lost; however, he noticed it when I upgraded his PC. I scoured various forums looking for 64 bit Windows 7 drivers for Conexant audio but to no avail. Microsoft and Conexant both said that HP should supply the drivers. By the way HP, the Conexant website says that they do not supply drivers even though they make the chipsets "at the request of the OEM's." Another post said that HP was not going to supply these drivers for Windows 7. The solution from HP for my model and Windows 7 was the "HP Software Advisor" which was 67MB and totaly useless. It appears that this is a very common problem. Anyway, here is what you do:
First you need 2 files which ironically enough come from HP, they are SP35558.exe and SP35558.cva They contain the Conexant drivers for Vista x64. (I subsequently have found the 32 bit drivers and the procedure should be very similar except the files are SP34789.exe and SP34789.cva). Type the following into your browser address bar ftp://ftp.hp.com/pub/softpaq/sp35501-36000 About half way down you will find these files. Just right click each one and save to your desktop.(The 32 bit files are in a different subdirectory at ftp://ftp.hp.com/pub/softpaq/sp??????-??????)
Double click SP35558.cva and tell Windows to use Notepad to open it. Scroll about half way down to "[Operating Systems]" and after "WV64UL=OEM" insert:
W764HB=OEM
W764HP=OEM
W764PR=OEM
W764UL=OEM
( For 32 bit systems use W732HB=OEM, etc.)
I next went up about 10 lines to "[System information]" and added
SysId3=0x3091
SysName3=HP Pavilion ze2000 series
SysId4=0x3096
SysName4=Compaq presario M2000 series
SysId5=0x3097
SysName5=Compaq Presario M2000 series
SysId6=0x3097
SysName6=HP Special Edition L2000 series
SysId7=0x3093
SysName7=Compaq Presario M2000 series
SysId8=0x3093
SysName8=HP Special Edition L2000 series
I got this information from another cva file on my PC at C:/swsetup/ (This is thedefault directory for HP updates.)
After modding the cva file, I saved it to C;/swsetup/sp35558/
I then executed the SP35558.exe file and voila I had sound, nice crisp clear sound.
The use of the cva file is to streamline the driver install and it is kind of cool if it works. If you cannot find it or you are not successful the first time or you do not want to bother with modding anything, do not worry, the manual install will work for sure.
Run sp35558.exe to extract everything and let it strike out. Then go to Device Manager and update the driver manually as follows:
Under Device Manager, right click "Multimedia Audio Device" under "Other" and choose "Update Driver" Then "Browse your PC" and "Choose from a list". Select "Sound, audio and game controllers", then "Conexant", then "Have Disk". Browse to C:/swsetup/sp35558/ and open "cp6308Ba.inf" (64bit remember). Now choose "OK" and ignore any warnings about incompatibility, WHQL, etc. Give it plenty of time, you might think you are in a loop, but you are not. Congratulations, you are done.
Hope this helps. -
How do I update drivers and BIOS on Satellite P300?
I've been having problems with my wifi, and as my partners laptop is working fine, it was suggested that I might need to update drivers and/or BIOS.
I've tried to do this but where do you download the BIOS/driver updates to?
It just defaults into 'my documents', sits there and does nothing?
After downloading, How do I ensure my notepad 'takes' the updates?
As you can see, I'm not overly technical so any advice in simpletons terms please...
Thanks.Hello
All drivers and tools for your notebook can be downloaded here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
At first I would try a WLAN driver update. If you have downloaded the WLAN driver, unzip all files and start the setup.exe file. This will automatically install the new driver and will be used now. -
how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon
To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.
-
Has anyone highlighted a word in online text, and it defined the word automatically?
i accidently clicked some buttons while reading online text, and the next thing i know, the word "meeting" is highlighted and being defined in a dictionary window that popped up. id like to know how to replicate the mistake i made because this is a really efficient feature.
it is not a mistake, it is a feature in OS X Lion. It's a 3 finger double tap over the word you want to search...
You can try it here with this: Rimini -
My new ipod touch is not recognised in itunes or Windows 7 on any of my computers/laptops. I've followed the online advice and still no luck. Help much appreciated!
Does it charge?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
R9 270X Gaming 2G, unable to use the latest drivers and Mantle
I just bought a R9 270X Gaming 2G S/N 602-V303-13SB1312109829-398
When I first got the R9 270X, I installed the latest AMD drivers with the full package.
Later I got the, what I found to be, notorious atimkdag.sys BSOD.
I recovered my system partition with Acronis from before I installed the GPU. And installed the drivers found on MSI website which are considerably older than those on AMD’s website. I have not had an atimkdag.sys BSOD since. In fact I think I am using Windows stock drivers as the driver version says 13.251.9001.0, and I think the MSI driver is 13.101.0.0. Not sure how that happened.
Now my understanding is that this GPU should be Mantle enabled, however using Star Swarm Stress Test, which includes Mantle testing, said it found no Mantle enabled GPU. Perhaps because I am using an older driver.
I read somewhere that atimkdag.sys BSOD is linked to AMD Catalyst Control Center. Since I never used that last time I had an AMD GPU, I have disabled it on start-up.
What do you guys think would be the best option here? How can I both enjoy the latest drivers and avoid the notorious atimkdag.sys BSOD. Or do you think I should just stick with the drivers I have, without Mantle enabled. I haven’t actually got any Mantle enabled games at the moment, but are planning to get it though.
It may or may not be important. But I upgraded from Windows 7 to Win 8 Pro then Win 8.1 Pro. Perhaps it is leftover sys files. I noticed in forums that the atimkdag.sys BSOD mostly hit Win 7 systems. Perhaps the reason I am not getting the BSOD now is simply that I am not using AMD Catalyst Control Center, as you would think that if it is left over from Win 7 it should affect both old and latest drivers, right.
ThanksPlease disregard my previous post asking for help.
This is also a message to other noobs like myself, read the F.A.Q. before you post anything in the forum. I read the F.A.Q. about how to update drivers, how to remove old driver fragments and followed it to the letter.
https://forum-en.msi.com/faq/article/where-can-i-download-vga-drivers-and-how-do-i-install-t
Now Mantle works and as for the atikmdag.sys BSOD, hopefully I will not experience this now that I completely uninstalled all previous driver files, using Driver Sweeper in Safe Mode. I do not see why I should.
If against odds it happens, then I will come back and ask you guys for help.
Thanks -
*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum
Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems -
We use an add-on in one of our online solutions and we've identified a security vulnerability. The issue has been addressed in our latest add-ons and we would like to know how we may blocklist our previous player through a firefox update?
You can file a bug report to do that request.
http://developer.mozilla.org/en/docs/Bug_writing_guidelines -
Can no longer install drivers and touch screen not working anymore
I have the HP 520-1130ea all in one PC. Its a touchscreen. I have Windows 7 home premiun 64 bit operating system.
it has been working fine for the last two years and on Friday 11th april, i connected my android tablet (samsung Galaxy tab 7.0) to my pc and it could not install the drivers so my PC could not see the tablet. Last week this worked ok. I attach my tablet to my pc using a USB cable and transfer files by usb transfer. I dont use any software at all.
I have tried to reinstall the drivers for the android tablet and i get the error code that the drivers were found but they cant be installed. Access denied.
I have also tried to restore my pc to the last time everything worked ok which was just a week before the problem started, but the restore has failed on 4 occassions.
I have now deleted all updates on my PC from last week and i think I have deleted something or failed to allow something to isntall (a box popped up when i restarted the computer after the update delete which I ignored)
No my touch screen no longer works.
I plugged in an external hard drive to back up my computer and I also could not install the drivers for that too. this just happened today.
My printer is connected to my PC and that still works ok.
I have been battling with this for 4 days now and ploughed the internet for solutions and no hope in sight!
I have also tried:
1. installing optional updates. no luck there. also some of the updates failed
2. giving myself full control on the system 32 folder in windows.
I am the administrator on the PC.
HELP PLS!!!Hi compnewbie,
Welcome to the HP Forums!
Thank you very much for your thorough post and detailed steps! I see that you are not being able to install drivers, and I would be happy to assist you!
The first suggestion I will make is to boot your computer in Safe Mode. To do this, please follow this document on Windows 7 Safe Mode. No extra software will be loaded, which will make this driver issue easier to troubleshoot. In Safe Mode, try to connect your external drive.
If you still cannot connect your external drive (or any other USB device), I recommend following this resource on Testing for Hardware Failures (Windows 7). This should help diagnose any potential hardware problems with the computer.
If you are not able to detect any hardware problems on your computer, please follow this document on Restore files from a backup.
Please re-post with the results of your troubleshooting, and I will diligently follow up with you!
Best regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
Can't login to Azure from Visual Studio when creating new app.
Hi, I already tried this at two different computers. Install VS 2013 Get VS Update 2 Get VS Web Essentials Get Azure SDK 2.3 Launch VS, Log-in with MSDN acc. File-New Project - ASP.NET Web Application (pick MVC + Web API) Use "Create remote resource
-
Itues crashes every time I open it. Process: iTunes [3198] Path: /Applications/iTunes.app/Contents/MacOS/iTunes Identifier: com.apple.iTunes Version: 11.0 (11.0) Build Info: iTunes-1100099063000000~1 Code Type:
-
I updated my iPad OS to and also updated iTunes to 11.1.2 and selected iTunes as restore while still sync with the HP Laptop. Now when I open Notes every note is gone! I have to get all my notes back someone please help! Thanks 728
-
Can universe connect to restful web service which is not soap based
Can universe connect to restful webservice? I know it is allowed to connect to SOAP webservice. Currently is using WSDL1.1. How about restful web service which does not have any wsdl file?
-
FG production on sales order but RM procurement on Sales Contract.
Dear Gurus Here is the client requirement for Planning and Procurements of FGS and Rms.( Process Industry) 1) Client wants to make sales Contract VA41 for FG in which they will create schedule line for item with delivery date in Month format with Qua