Online Emulator for RV042 router

Hello:
I am looking for Online Emulator for RV042 router.
If yes, please reply with a link.
If no, please give me a similar one.
Many thanks.

Sang1224 wrote:
Please keep me posted regarding the outcome.
I am never surprised by Verizon's marketing shenanigans, but everyone in my cul-de-sac is running a VZ WiFi router, so the signal is always bogged down. I just want to get this new router and see if it helps with my service.
I will try again today, if I can get someone on the phone.
I'll keep you posted. No contact from either here or {edited for privacy} Verizon Executive Relations Team, who emailed me yesterday. I just checked my call log in DV and my cell, and no missed calls.
In my now daily check of offers, today was 75/75 for $10 and a new router. I clicked it, and unlike your experience, it did offer it to me for only $10 more for 2 years. As tempting as it was to do it for another free router I resisted, waiting to see how this is resolved.
I will wait till later today to see if anyone reaches out before going further.

Similar Messages

Setting up security and such for wireless router wrt54g without admin rights (work computer)

We are moving, I am in a new location with a new company and my only computer is this one from work. Trying to get my home network setup, I'm locked out of admin rights on this thing and am trying to set up the above router. I thought I had a modem problem at first, but finally I am online wired for now to the cable modem. I would like to get this router up and running, but I can't use the easy setup disk, and I just tried using the easy setup download and it is locked out as well. How can I get my router setup with security, with no admin rights on the pc?
This will be my first wireless router, so I am very green on the specifics and terminology. Any help is most appreciated.
Many thanks,

Thank you toomanydonuts!
I will do this when I get back to the townhouse this evening.
Just so that I am prepared for tonight - I want to confirm and ask a few questions on the "options" and note a couple things I noticed that may help with answers...
Internet connection type - should be easy, I assume there is a "cable modem" option.
SSID - I do not know what this means or what to choose
wireless encryption method (WEP, WPA, WPA2) - Which is best, or is there one I must pick due to computer used and such, I also want to get my Nintendo Wii accessing correctly, I saw these options on that setup, though it didn't work per my first message on the board. I assume whatever encryption method used needs to be chosen for the Wii?
wireless encryption password - I think I can handle this one
A couple of notes -
this laptop has this always on radar looking for wireless connections - how can I name my router so I know it's mine, other than the fact that it is the strongest signal. Maybe that's a network setting?
Thanks again, glad I came here.
Edit: I suppose I should add, just to ensure - in order to do this process through the url provided above, I need to be ethernet wired through the router to the modem? in order to access last night, I was straight into the modem, didn't seem to work wired through the router.
Message Edited by Syxpack on 03-27-2008 05:25 AM

Restart of RV042 Router

Can anyone answer this for me please? Would I lose my router settings if I were to restart the RV042 router from the System Management>Restart section of the router UI?
The "restart" command is just like a warm reset, correct???
Thanks,
Max

Max,
You are correct. Restarting should not affect the configuration.

Snes emulator for mountain lion with support for usb controller dongle

Hi,
I recently downloaded an snes emulator online and found that it does run the super nintendo game fine though it doesn't have support for the usb dongle for the controller. By any chance does anyone know a emular plug in or emulator for mountain lion that has this support for a usb joystick.

Thanks for the reply. Still curious if Apple did right by their customers as the support rep implied that they would. I can't confirm either because I discovered tonight that I can't upgrade to Mountain Lion yet until Mariner Software decides to make one of their products compatible with 10.8. Starting to think I need to find an alternative to their product.

Why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router

why my iphone 4 connect to wifi, but when i open safari and search something it say i not connect.. but in the same house my sister using iphone4 too but she can online with the same router. i go and check over the detail of the network i connected, over the ip address and subnet mask have the numbers, but over the DNS and router don't have any number...isit the problem???? i can online at any other place but just my home cant...y????

Hey confuddled_chica!
Try the steps in the article below to troubleshoot this issue:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Issue in Configuring Linksys RV042 router

Hi,
I am facing some issues in configuring the Linksys RV042 router with dual WAN configuration. We are having two internet connection and I want to perform the "Load balancing" between the two internet connections. I have followed the RV042 manual and configured the router.
But while using the Linksys RV042 for load balancing the "Outlook 2007" and "MSN" are frequently disconnecting in the client machines. We could not use the Linksys RV042 router because of this issue.
We are using the "Static IP" for the two internet connection and configured with manual. We are facing issue only in "Outlook" and "MSN" but I can browse the sites without any issues.
Is there any configurtaions needed? Please help us to get the solution in this issue.
If you need any more details please mail me @ [email protected]
Thanks in Advance,
R. Manikandan.

R. Manikandan,
Without knowing more about your configuration, and the reason for "Outlook" and "MSN" disconnecting. I would suggest that you look at the following documentation for setting up "Dual WAN" on the RV042.
http://www.cisco.com/en/US/products/ps9923/products_qanda_item09186a0080a36632.shtml
It sounds like you may need to setup "Protocol Bindings" for your SMTP traffic to be directed out a specific WAN port.
If you continue to have issues, please let us know.
Darren

Unable to connect through QuickVPN to RV042 router

Hi!
I've RV042 router with the firmware 1.3.12.19.
I'm not able to connect from my QuickVPN client ver 1.3.03 to the router.
If anyone know the fix for the above issue kindly let me know.
Thank you,
Regards,
Muthu

Welcome to the forum!
There has been no end to the "Quick VPN not connecting" threads here on the forum, and there can be a number of factors that will cause QVPN to fail. It has gotten to the point where a fellow engineer has created a thread just for Quick VPN issues to try and keep everything contained in one place. It may be prudent to post your question in his thread that you can find at the link below.
QVPN Thread
However, if you would like to continue the discussion here in your own thread I would suggest the first thing you do is post at what point during the connection process does QVPN fail? For troubleshooting purposes go into the directory that you have QVPN installed which for most people will be Program Files>Cisco Small Business> and go into the Quick VPN Client folder. In this folder you will find a log.txt file. If you can post the output from this file (and please edit out your network information) then we might have a better idea why the connection is failing for you.

Is there an official NES Emulator for iPad?

Hey guys, i was wondering, is there an official way to get a NES Emulator for my iPad without having to jailbreak it? I don't really want to jailbreak my iPad

Apple has had exactly one app that slipped through and was immediately removed.
Estimates are 40% of the apps in the Market contain some sort of malware/spyware.
This is the same sort of illogical argument that comes out when a proof of concept virus is found and Windows users say that Apple has viruses just like Windows...and there hundreds of thousands of viruses.
So since the Apple Store actually checks apps for malware/spyware and the Market doesn't, no the iOS app couldn't be the same. And your app would have to include that code, be sent to the app store for approval and slip by them and put in the app store. Given there are about a million apps and only one has slipped through what do you think the odds are you will be successful? Since the Market doesn't check at all that is the route to go.
And since Apple does check apps they cannot allow an fraudulent, ripoff NES Emulator to be in the app store since NES has not licensed one. If they did they would immediately here from NES and be held accountable.
Now do you understand?

Advertise implicit-null label for static routes

Hi, I want to ask if there is any way to change the label or stop adveritise label for an static route. Normally LDP advertises an Implicit Null label for directly connected routes. We want to do similar thing for static routes.
We need to do this is because somehow we need to do rate-limit on the PE interface connecting to the core network instead of the interface connecting to CE. As the incoming packets still got labelled, the rate-limit is skipped. So we want to stop the PE creates label for the static routes or advertises them with implicit null label. Thanks in advance.

Calvin,
Bear in mind that if you only enter the "no mpls ldp advertise-label" command, LDP will stop propagating all labels, which might not ba what you want. If you selectively want to propagate certain labels, then you need to also use "mpls advertise label for " as Shivlu suggested.
Regards,

Attachments: I am creating an online application for employment and need applicant o submitt credentials, Is thier a way they can attach docs to the application?

Attachments: I am creating an online application for employment and need applicant o submitt credentials, Is thier a way they can attach docs to the application?

Hi Syclopz88,
You can use 'File Attachment' option in the form which will allow the user to attach documents to the application.

How do I set up an emulator for testing my application?

I'm starting to wade into GPIB and cannot seem to find the best way to continue given all the components (not meaning ActiveX) required to assemble a semi-reliable development and testing environment for beta rollouts.
I have set up my design environment. Now I need a way to emulate some of the equipment I will be developing for so that I may test my apps before final testing on the actual equipment (which I obviously have no access to at this point).
Given that.. am I correct in understanding that LabView or IVI allows this type of functionality? If so, here are my specific questions regarding development:
1) Do I currently need any hardware or can the GPIB device list be populated from IVI/LabView emula
tors? In other words... how do I make the 'link' between these two technologies?
2) Can IVI/LabView run on the same machine as my test application, or is a secondary machine required?
3) Is there a general punch list of software (LabView, etc.) I might need in order to get this going?
4) Any general (or specific) overviews that may help me get over this hump would be greatly appreciated.
Charles

Whether or not you are able to simulate your hardware will depend on what method you are using to program it. If you are programming the instrumentation directly using the GPIB ActiveX control or GPIB calls directly you will not have the ability to do simulate in software. If you are using an instrument driver, however, you will be able to do simulation if the instrument driver is IVI compliant.
Assuming that you are using an IVI-compliant instrument driver, here are the answers to your questions:
1. You do not need any hardware whatsoever. You can either specify to use simulation in your code by using the InitWithOptions functionality and specifying "SIMULATE=TRUE" in the option string parameter. You can also set things up externally so that you can alter simulation strictly through the IVI configuration so that your code doesn't have to change.
2. It will run on the same machine as your code. As far as your application is concerned, it will not appear any differently however no GPIB communication will occur.
3. IVI compliant instrument drivers for all of the GPIB hardware you are using. These are available for download from ni.com.
4. I think that there may be some IVI-related application notes.
Assuming that you are not using an IVI-compliant instrument driver and instead are either using a non-IVI instrument driver or making GPIB calls directly, things can get a little more elaborate. If you want full emulation capability you'll need to write another piece of software that emulates your device. This can be done in LabVIEW or any other ADE of your choice. What you'll need is a second GPIB card (to act as your device) that you'll cable to from your main computer. That card can live in a second machine or in the same one as your main application. You may want to put it in a separate test machine just to keep things a little cleaner.
If you go with this approach, it's not too difficult to write an emulator for a single device (or at least that functionality of a device that you use) per GPIB card. It will be more difficult to write an emulator that emulates multiple devices using a single GPIB card. In other words, you may want to use a separate GPIB card for each instrument you want to emulate. I wrote such an emulator some time ago but can't seem to find it. In any case, it's probably only a couple of days effort.
To make a long story short, your life will be a lot easier if you have IVI-compliant instrument drivers available for the hardware that you are using.
Jason

HT1338 What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

What is the best online storage for photos. Specifically one that allows the original image quality to be downloaded should your hard storage goes belly up

I'd put them on an external hard drive(s) and burn them to a DVD as well (at least 2 - 3 copies on different drives/media); I prefer having control and a local solution instead of relying on a server and the possibility of someone (who shouldn't be) downloading my work.

I have a Mac Air. When I go to view any video online (youtube for example)and click on a video, I get the space where the video should play but there is just a black screen and no play button and the video does not start. Any ideas?

I have a Mac Air. When I go to view video online (youtube for example), the screen for the video comes up with a black square space where the video should play. But there is no pay button and the vidoe never starts playing. Any suggestions would be appreciated.

Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

It is asking for a router name and password???

The sales person told me how easy this would be to set up..."just plug it in" he said...right. Anyhoo - I disconnected my ancient wireless router and put the cd in - started doing its thing and then it asks for a router name and password...the only name and password I have is from my old ancient router...how could it be the same? Where do I find this info? Thank you for any help!

Just go to the Linksys support site, find your router model and hardware version there, and download the User Guide or User Manual for your router, and there's all kinds of useful information there. I'm surprised that there isn't a "Quick Start" guide in with the router that gives basic instructions like go to 192.168.1.1 and then how to login to set up your router. But it is in the downloaded user manual for sure.

Online Emulator for RV042 router

Similar Messages

Maybe you are looking for