Online # local area code doesn't come up with opti...

I need a local # with area code 813 for tampa, FL us and I can get nothing. There is nothing that shows up in the drop down bar and no #s available. Does anyone know how to resolve this?

Nope, not working for me in Minnesota. Nothing populates in the list of area codes at all, it's just blank, and then when I hit the "next" button it defaults the phone number to the first Minnesota area code in the list (21 which I do not want.

Similar Messages

Need an online number for local area code 606 for ...

I need an online number for my local area code 606 Morehead Kentucky.
There are several cities surrounding mine with local online number options
but not Morehead, Kentucky. If it is possible, please add Morehead to your list
and I will purchase an online number. Thank you for your attention.

mjm10036 wrote:
I wanted to get an Online Number for New York City and got as far as
Select your local area and choose a number
at
https://secure.skype.com/store/skypein/number?voucher=0&fuseaction=skypein.info&country_code=US&vc=0...
But couldn't figure out what to chose among 13 choices listed as New York City Zones 3 through 15. Is there a difference in the Zones? I notice they all have the same area code - 347.
There are some subtle differences, related to how local phone calls are billed for callers in New York City. It would not affect how the Online Number works for you - you are not charged for incoming calls made to Skype's Online Numbers, when you answer those calls with Skype. For those calling you, it can mean the difference between a free call to your Online Number and having to pay a small fee to call your number. For someone calling from outside the New York City area, it probably doesn't matter which of those zones you use for your Online Number.
I have not found a good concise online reference to those calling zone in the past. I have found some rather cryptic material that shows which prefixes in each of the New York City area codes are in each of those zones. The zones are defined by lists of prefixes within each of those area codes, and those lists can be substantial with the growth in mobile phones over the years.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Local area connection doesn't have valid ip

I have a Touchsmart 320-1030 that belongs to a friend. Everything was working fine then for no apparent reason connection to the internet was lost. They have contacted their isp and gone through all troubleshooting with them. All other equipment (ie laptops, phones, ect..) connect and work fine. The windows troubleshooter offers no help and says local area connection doesn't have valid ip is the reason it won't connect. This is true when trying to connect wired or wireless. I piddle with fixing computers as a hobby so they have asked me to see what I can do if anything. I have been Googling, reading, and trying everything I have found for three days and have had no luck. So I am hoping I can find some help here. I have never seen anything like this. It may be a hardware problem and I'm not smart enough to realise it. But I need to know that too.
System -
Touchsmart 320-1030
Win 7 Home Premium
4 gigs ram
What I have done -
Brought system to my house to see if it will connect, it does not so I am working on it here.
I have rebooted modem & router
Connected systen directly to modem bypassing router
Uninstalled and allowed windows to detect and reinstall network drivers
Updated network drivers
Updated Bios
Tryed to inatall orginal drivers from support but they wont install
I have changed from detect automaticly to use this ip in tcip ip4 and used ip I know is good to my router -
When I did this last thing the wireless did see my network but the network 2 thingy that it makes still won't connect even tho when I search for connections the list says I am connected to my network. The little thing by the clock says not connected. Also the ethernet adapter says unknown public network when I do that. Wireless says unknown public network or connection when I have it detect ip automaticly.
Network discovery will not turn on in homegroup, nether will the services assocated with it.
I have run tweaking . com firewall repair
I have uninstalled avast security, there are no other av or firewall programs
I have uninstalled bonjoir because I read that causes a conflict of somekind
I have run tweaking . com windows repair ( just in case because it looked liked the firewall repair was doing something).
I have run sfc /scannow and it found and fixed some things, ran it again and it found nothing.
I am pulling my hair out with this one. Please help.
Thanks for your time.

SSCRSR1, welcome to the forum.
Wifi problems can be very difficult to diagnose. Here is the Wireless / Networking / Internet section for the computer. Read the Wireless area to see if there is any help with the problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Configuring UK Local Area Codes for BE3000 Site

When configuring sites for the BE3000, it is possible to define a local area code. This creates entries in the dial plan that allow users to just dial a local number with the system automatically adding the area code.
Currently (as of version 8.6.4) the BE3000 user interface requires that these local area codes are defined without the national trunk access code (i.e. the leading zero).
Examples:
Customer Location
Local Area Code
BE3000 Site Configuration
London
020
20
Bristol
0117
117
Bath
01225
1225

Hello,
I've escalated this issue and hope that we can provide better coverage for this part of the UK. A common reason for the lack of Skype #s in a particular location is often the inability of the local telco to make sufficient #s available to Skype to enable the facility to be offered.
That may or may not be the case here and a review will establish the reason.
Thank you for your informative posts.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

SPA3102 Local area code

Was wondering if there was a way to set up my router so that when I dial out via voip, I wouldn't have to dial the country code + area code and so that it automatically dials the local are code when I dial a 7 digit number?
(Note: I tried to make this thread in the voip router thread but I don't have the permissions to.)

Hi!
These products are being handled by the Cisco Small Business Support Community.
*If my post answers your question, please mark it as "Accepted Solution".
*Don't forget to give "Kudos". Thanks!

Whenever I go to webpages there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.."? What do I do?

Whenever I go to some websites there are a few that come up with: "Unable to connect Firefox can't establish a connection to the server.." and the problem occurs with the same websites on other browsers. What might be the problem?

If you get the same problems with two browsers, the problem is
outside of them. Check you computer for blocking programs.
Separate Issue;
Your System Details shows;
Installed Plug-ins
Shockwave Flash 15.0 r0
Shockwave Flash 16.0 r0
Having more than one version of a program may cause issues.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Flash Player '''v16.0.0.257 https://www.adobe.com/products/flashplayer/distribution3.html'''
http://www.ehow.com/how_11385212_troubleshoot-reset-connection-firefox.html
https://support.mozilla.org/en-US/kb/server-not-found-connection-problem

When I open my Apps tab on Creative Cloud it doesn't come up with my apps it just says "Download Error. Contact support."

When I open my Apps tab on Creative Cloud it doesn't come up with my apps it just says "Download Error. Contact support." I have tried re-downloading it 3 or 4 times and it still doesn't work.
I've downloaded it on my macbook pro. I had it before but deleted it accidentally when cleaning my laptop.

Start by running the cleaner tool and reading the other article.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Sign in, activation, or connection errors | CS5.5 and later
Mylenium

HT1386 I hook up my ipod to itunes and I click on it but it doesn't come up with the bar on the top so what do I do to put music on it from my computer? pleas help!!

Pleas help i want to download music from my computer but when i hook up my ipod it doesn't come up with the bar were i can do thatb so what do i do to download music!?!?

If your device is not recognized in iTunes, try these suggestions:
iOS: Device not recognized in iTunes for Windows
Also try to connect in recovery mode, to set it up as new device and start again:
How to back up your data and set up as a new device

Online Number "Area Code/Local Area" Selection DOE...

Someone else already posted this earlier, but im having the same problem. I am trying to get an online skype number (NOT THE "TO GO" NUMBER) in the United States and I am able to set the country and state selections, but when asked to set the area code/local area (step 2 on the page) there is a blank field and the drop down box to select the area code is also blank. Reloading the page (numerous times) doesn't fix the entry, and this is apparently the same problem for each state selection, so
I have included the URL where the process starts:
http://www.skype.com/intl/en/features/allfeatures/online-number/
and the URL for where the error is occuring on the US section:
https://secure.skype.com/skypein/number?vc=&country_code=US&voucher=
It still works for all of the other countries and for the "Skype To Go Numbers," but for some reason not the same with the "online skype numbers" where people can reach you in the United States section and when i type in a number on the local number box i get the area code of the smallest number within the same area of the state on the payment page no matter what combination. Like for Texas i'll get a 210 area code number (San Antonio,TX); For California i'll get a 209 area code number (Modesto,CA); For Florida i'll get a 239 area code number (Naples, FL); For Georgia i'll get a 229 area code number (Albany, GA) and so on. But the bottom line is that due to this error there you only have one area code choice for each state, which more than likely in a remore area of the state. If it could be changed to where we type in the area code and number i would greatly appreciate it and purchase a number. Trying to get past this entry for a week or two now and having no luck. I tried to enter a number in the field, which which it doesn't allow me to do. If anyone can help in fixing this problem, i would greatly appreciate it and start getting new numbers. But i'm not looking to just get a remote area code within a state.

Dear Readers,
My experience is similar; in my region, I had to choose a number from a nearby township; numbers in my locale were simply not available. As I understand it, Skype obtains numbers from local telephone companies; numbers are not available everywhere.
From this information: https://support.skype.com/en/faq/FA256/how-do-i-set-up-my-skype-number
When you purchase a Skype Number, you will need to choose one from our pre-selected range. However, you can choose your favorite number from that range. You can search for your preferred number using the Enter your favorite combination search box, or by clicking Show ten new suggestions… to scroll through the available options.
Here is a link to the library of articles on Skype Numbers: https://support.skype.com/en/category/ONLINE_NUMBER_SKYPEIN/
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Address Book won't import local area code

I'm trying to export my contact info from Palm Desktop to Address Book. Everything works fine, expect that AB doesn't import a contact's area code if it's my local area's code. In this case AB only imports a contact's 7 digit phone number. This isn't a problem with area codes outside of my local code, --they import just fine, and I get the whole 10 digits.
I've tried exporting both vCards and text files. By opening the text file with TextEdit, I have verified that Palm Desktop is indeed exporting the area codes --both my local code and distant ones. Yet when I import that same file into AB, contacts in my local area are stripped of the area code.
Any ideas?
Thanks in advance, --Brian
12" Powerbook G4 Mac OS X (10.4.8)

Thanks for your questions/suggestions. I think they have helped lead me in the right direction over the past 24 hours, though I still don't have a solution.
To make the long story short:
I believe the problem lies in the fact that as I've added contacts to Palm Desktop over the years, I've not included an area code if they were in my area. Now I'm switching to AB since it can sync with my new cell phone, and I'm needing area codes for all calls. Rather than enter my local code for hundreds of contacts, I've used a Palm preference whic sets up a "default area code."
What I have discovered is that contacts for which I have manually entered an area code transfer to AB just fine. Contacts for which this preference provides the area code lose this information in the transfer. This is baffling, because the two cases look identical when viewed with Textedit, --the area code is visible plain as day in either situation.
Just as puzzling --when AB imports a contact it gives a chance to review the information if the card is a duplicate. When I perform this review a "Text File Import" window appears. In this window areas codes always appear, --whether manually entered or provided by the Palm preference. However, in the "Reviewing Card" window which follows, cards which had Palm preference provided area codes have inexplicably lost those codes, while those with manually entered codes have retained them.
Any further thoughts?
Thanks some more, --Brian
12" Powerbook G4 Mac OS X (10.4.8)

Dialing local area code with new digital voice?

So I just had Verizon phone/tv/internet installed 2 days ago. I have FIOS digital voice and I have to dial my area code to make all local calls. I'm told this service is 6 months new and that I will see a nearly $10 savings in government charges and taxes from other FIOS telephone customers.
Anyone out there have digital voice and knows someone who has regular FIOS voice and compared bills yet? Curious since it would be a couple of months before I know the exact savings. I hear the first bill is will be different than the rest.

RayF wrote:
Mine was just installed today and I have the same problem. You posted on 2/27 and have no posted solutions. Did you get this resolved?
The "solution" is to dial 10 digits. Period. What is the big deal? I have had to dial 10 digits for 15 or 20 years, starting with my original POTS service and now with Digital Voice.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9
Keller, TX 76248

No local area codes

I am willing to pay for an online number but I live in Prestatyn, North Wales. The area code is #441745. I do not have the option to select this area code when buying a number. The nearest area code to me is over 50 miles away, and that is in England, thee nearest welsh std code is over 120 miles away. I would not benefit from this. Having only downloaded Skype today, I may be deleting tomorrow??

I have had the same problem. I now can't activate my new credit card. I can't beleive this hasn't happened to any one else?

CR 8.2 doesn't come up with lens correction profile on Canon 6d with EF 24-105 L 4.0 IS/USM

Dear community members,
Some weeks ago I bought my new Canon EOS 6D with a EF 24-105 L f/4.0 IS/USM lens an I am absolutely happy with them :-)
The only problem that I run in to is when I process my photographs in Camera Raw. The thing is that CR does not come up with a lens correction profile for de Canon 6D with the lens mentioned above.
I do find a profile of the 1D Mark III, but this one does not work very well on the RAWs from the Canon 6D.
Does any one know if and (when yes) where I can find the right profile for lens correction? At the Adobe site I could not find the profile van this camera in combination with this objective.
Or perhaps there is another way to apply automatic lens corrections on RAW;s from the Canon 6D with a EF 24-105?
Kind regards and many thanks in advance for your answers :-)
-Gozotxu-

Hello,
Thanks for your advice.
I did download the DNG Coverter but it did not help. So I decided to uninstall Photoshop CS6 and reinstall it again on my Mac.
For uninstall I followed the following steps:
-go to finder
-go to the Photoshop CS6 map
-dubbel click on the Adobe-uninstall icon
This worked perfectly well without any errors.
Now I am running into another problem, a problem with reinstalling PS CS6.
I don't have a cd-rom with PS on it, but I have a downloaded a .DMG file which I bought and downloaded from Adobe (I don't have a CD-player in my Mac). This should not be any problem. But what happens is this:
When I dubbel-click the .DMG-file (Photoshop_13_LS16.dmg) the normal installation window appears.
After dubbel-clicking Photshop CS6 icon the following screen appears:
After selecting the Install icon the following screen appears:
The error message is in Dutch and says: 'install' excists on the diskcopy 'Photoshop_13_LS16.dmg'. Safari downloaded this diskcopy on 2 July 2013
The two buttons say: " Cancel" and "Delete diskcopy file"
When I select "Cancel" the application stops and when I select "Delete diskcopy file" it removes the Install-file (from screenshot) and the application stops.
Could you please tell me what I am doing wrong?
Thanks in advance!
Kind regards,
Gozotxu

OpenAuth2 access code doesn't come back from IE

Hi all,
I'm trying to get an OpenAuth2 access token in order to ultimately extract data from Google Analytics.
I can create a code url and pass that to the chrome browser and the request is serviced displaying the access code in the URL bar. I cannot however seem to grab this code using powershell as there is no ComObject for Chrome (as far as i can tell).
I've tried this using IE (which i can grab the URL using the ComObject) however the request doesn't seem to be serviced in IE and instead i get "This page can't be displayed" (the access code is not displayed in the URL string as it is with Chrome)
Is there some setting i am missing in IE?
<code>
#Declarations
$clientId = "**"
$clientSecret = "**"
#return to us locally
$redirectUri = "http://localhost:8080/"
$email = "**"
$passwd = "**"
$grantType = "authorization_code"
$scope= "https://www.googleapis.com/auth/analytics"
$responseType = "code"
$getCodeUrl = "https://accounts.google.com/o/oauth2/auth?scope=$scope&redirect_uri=$redirectUri&response_type=$responseType&client_id=$clientId"
#Auto Sign in to Google accounts
$ie = New-Object -ComObject InternetExplorer.Application
$ie.Visible = $true
$ie.navigate('http://www.gmail.com')
while($ie.Busy)
sleep -mil 100
if($ie.Document.Url -match 'Inbox')
Write-Host 'Account already logged in'
#return $ie
else
$ie.Document.getElementById("email").value=$email
$ie.Document.getElementByID("Passwd").value=$passwd
$ie.Document.getElementById("signin").Click()
while($ie.Busy)
sleep -mil 100
if($ie.Document.Url -match 'Inbox')
Write-Host 'Successfull login!'
#return $ie
else
Write-Host 'Login failed!'
#IE doesn't appear to return the access code like Chrome
$ie.navigate($getCodeUrl)
</code>

Hi Anna,
Thanks for the reply, appreciate it.
I've managed to get around the issue by turning IIS on and changing the Redirect URL to localhost:80 instead on localhost:8080. Once IE has a page to display for the response the access token flows through fine.
Not sure why IE would require this step to work but for know this is working.
S

Online Number Area Code request

Hi,
Would it be possible to be able to have Swansea (01792) included under UK category?
The nearest STD at the minute is Cardiff

The demand for a Swansea number is here.. Was considering using Skype as a telecom provider, realised they didn't have Swansea... Seen plenty of requests for 01792 -- maybe Skype should stick at their Championship level service then?

Online # local area code doesn't come up with opti...

Similar Messages

Maybe you are looking for