Online Meet-up 29. Is BW provided with AII 4.0 standalone?

from the documentation for AII 2.1:
Preconfigured EPC BW reports.
Does not require any seperate BW instance
Regards,
michal

SAP experts whispered to me that this is "old" news.
Others are welcome to jump in!
Thanks and stay tuned to <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/technology">The Technology HomePage</a> for tally and scores

Similar Messages

Online Meet-up 3. Does SAP provide explicit support for ALE?

hi,
yes, it does support.
for details on what is ALE please refer
Online Meet-up, 4. What is ALE?
regards,
arul sekar

Please refer to SLIDE NO: 11 of the On-line Meetup Presentation for details on where ALE fits in SAP context.
It is between AII and Device controller.
regards,
arul sekar.

Online meeting - add phone number

After clicking on Online Meeting in Outlook 2010 you have;
TO:
SUBJECT:
LOCATION: Online Meeting
I always want to put in my conf call number and passcode for the invitees. Is it possible to have the Online Meeting change text automatically to where I want them to call?
i.e.
Online Meeting:
1-xxx-xxx xxx (xxxx101) Toll Free:
1-866-xxx-xxxx PC: 123-321-4567 then #

Hi,
You can add custom text on online meeting invitation (add the information in the footer of the invitation interface) with the help of the link below:
http://technet.microsoft.com/en-us/library/gg398638.aspx
Also you can refer to the link below of “How to add custom text to Lync meeting invitation”:
http://hanytaha.wordpress.com/2012/01/11/how-to-add-custom-text-to-lync-meeting-invitation/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Is it possible to make in : Join by phone to online meeting request that the number is shown as hiperlink in outlook??

is it possible to make in : Join by phone tin online meeting request that the number is shown as hiperlink in outlook 2010??
when i send the invitation for example to gmail user I can see it on my phone. but if I would like to call directly from the outlook request I have to copy and paste the number , it is not hiperlinked....
help
any suggestions???

Mine works with the tel URL syntax already in there.
A couple of thoughts, if that's not working for you you could make your own hyperlink to look something like this:
<a href=tel:+556666888888>Join Via Phone</a>
I've seen callto: work as well.
Which you might be able to append into the default meeting invite:
http://technet.microsoft.com/en-us/library/gg398638.aspx
The other thought is to check out Matt's select dial:
http://gallery.technet.microsoft.com/office/Lync-Copy-Dial-Just-Select-3c426244 which would allow you to highlight any number and hit a hotkey to call.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Join Online Meeting link launches the Web App even though the Lync Client is installed.

Hello,
I have this problem on a few computers. When I click on the "Join online meeting" button or link (https://meet.###.com/###/1wnj6l1n) the web page launches the
webapp instead of a session in the full Lync client that I have installed (v. 4.0.7577.0). There is not a ?SL= at the end of the weblink.
I searched online to see if there was a registry setting that auto-bypasses the client check, but there isn't. I have tried a repair on the Lync client, but still no luck.
Has anyone else run into this problem?
Thanks.

I found the answer. The Https:\\meet.domain.com was opening in the internet zone with Protected mode on. I added the URL to my trusted sites and it was no longer an issue. I didn't test it but turning off protected mode may work as well.

Iweb is not provided with the new version of AIR?

I just purchased new version of AIR, seems the iweb and idvd is not provided with the ilife. How can I get one?

It is now apparent that iWeb, and iDVD, will no longer be supported by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
All of these issues can be solved with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
Apple has announced that iLife is now an unsupported product and those iApps will only be available thru the App Store from now on. However, the boxed iLife 11 at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought. Personally, if I already didn't have a copy I would purchase one to have it for reinstallation purposes if ever needed.
OT

I signed up for the edge program and need to send back my old phone. The instructions say I need to put it in the edge bag provided with my new phone order, but no bag is in the box. Can I get one at a store? Please respond!!

I signed up for the edge program and need to send back my old phone. The instructions say I need to put it in the edge bag provided with my new phone order, but no bag is in the box. Can I get one at a store? Please respond!!

monkeybuttqueen,
Thank you so much for reaching out to us today. I hope you are enjoying the new device! I do apologize that you didn't get the proper info sent to you to send back your old device. You can always print a label online from My Verizon. You can do that at www.verizonwireless.com/printlabel Pleaes keep us posted if you have any questions or concerns.
KevinR_VZW
Follow us on Twitter @VZWSupport

I tried to join an online meeting. Mozilla rejected the site. I added the site to allowed sites through exceptions but it still won't allow site?

Every attempt to join the online meeting failed. I kept getting a not trusted site message. I could hear the conference call but I could not see the info presentation.

Sometimes, sites divide their content and login logic over multiple servers. In that case, the sites may not recognize that you have logged in if you block third party cookies. Can you check your cookie settings, as described in this article: [[Websites say cookies are blocked - Unblock them]].
During your earlier troubleshooting, did you try the site in Firefox's Safe Mode to rule out an extension as the potential culprit? More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Not able view full name of external business partner in Lync online meeting.

Hi
I am not able view full name of external business partner in Lync online meeting.it is showing only First Letter and position title.
example( D...Global Team Lead)
It is difficult to find the names please help me, what will be the problem.
Thanks...

Hi,
Did the issue happen for one partner or for multiple partners?
Did the issue happen for single online meeting with external business partner or for multiple online meetings?
Please update to the latest version for Lync server and Lync client and then test again.
In my Lync environment, on a Lync online meeting which included external federation users, I can see the full name of them.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Director 11 - Live Online Meeting

Hi folks,
on
Tuesday, June 3rd @ 9am EDT we will hold a
live online meeting with users and the Adobe Director Dev
Team to
demonstrate and discuss bugs and quirks in Director 11 and
of course have a Q&A session.
This meeting will be an Adobe Connect live meeting incl.
screen-sharing, VoIP audio, chat and more.
If you have any bugs or quirks to present and discuss, please
let me know so I can add them to the agenda.
http://adobechats.adobe.acrobat.com/directorforum/
Log in as guest and enter a user name.
What's
the exact time in your time zone?
Cheers,
Martin

Hi,
thanks a lot to all of you guys who attended todays meeting,
which hopefully was the first in a series of upcoming meetings.
Thanks also to the Adobe Director Dev team and I really invite you
to attend future meetings, because this is a great chance for you
and us to get a little bit closer.
We had a peak of 51 attendants, which is great especially
because it was very early at least for US west coast Director
users.
Sadly I forgot to record the meeting and I'm really very
sorry about that (was just to nervous and busy to remember that
record button). I promise, that I will post a summary on
directorforum.com by tommorow.
I'm sure we will repeat these meetings and I hope that some
of you will have ideas and are willing to present to the community
and to the folks at Adobe.
Cheers and thanks,
Martin

How To Create Lync Online Meeting Using EWS

Does anyone know how to create a Lync Online Meeting Using EWS (Exchange Web Service API). The exchange version I'm using is 2010 SP2.
I'm able to successfully create a regular meeting/appointment using EWS and now I'm trying to create a lync online meeting using EWS which will incorporate the lync online meeting URL in the invite that gets send out to attendees.
I'm using C#. I have try setting the Appoinment IsOnlineMeeting property to true but I'm not seeing any changes it is having. I see that the Appointment object also has a JoinOnlineMeetingUrl property which I have tried to use but I got an exception because
my exchange version is 2010 and it requires the 2013 version.
I've been researching this for a couple of days now and I've yet to find a solution for it. Any help would be appreciated.
Thanks,

Hi.
I see that you have the same problem. I'm trying to create an online meeting with EWS (or UCMA 3.0?) without results. Have you resolved? Can you post your code?
Thanks in advance.

Online Meeting invite customization not showing

I've added our logo url and custom footer but neither show up in a new online meeting invites. Any ideas?

Hi,
Did you solve the issue Raju_raju provided above?
You can also try to customize the Meeting Invitation by using Lync Server Management Shell such as following:
New-CsMeetingConfiguration -Identity site:Redmond -EnableInviteCustomization $True -LogoURL "http://www.contoso.com/logo/contosobanner.gif" -HelpURL "http://www.contoso.com/support" -LegalURL "http://www.contoso.com/disclaimer"
-CustomFooterText "Communications may be monitored or recorded."
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I would like to downgrade to the older version of the Adobe Shape App Version 1.2.0. Can I please be provided with a link in order to download the older version?

I would like to be provided with a download for the older version of adobe shape 1.2.0 please!

If you've been backing up to your local iTunes library, check your APPS pane to see if you have an older version of Shape stored locally. If you do, you can delete Shape from your phone, connect your phone to your computer, and drag the older version from your iTunes library onto your device. That's what I did to go back to the older version, which produced shapes that work much better for my purposes.
Adobe, it seems like with the newest version of Shape, you made DRASTIC changes to the way the app processes images into shapes. Is there any way for us to opt for the older version of processing? Or to toggle between the two?

Can i fill one provider with more than one application?

Hi,
I have so many application. Currently, we adding one provider with one portlet. So, we just want to know is it possible to add one portlet fill with many application?
The idea is we want to reduce provider in portal.
Thank you.

No, you can only sync with one. If you sync with another it will erase the device in order to mirror the other iTunes library.

Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use.

Hi,
When i am trying to deploy sharepoint 2010 application in VS 2010, i am getting the below error:
"Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use."
How to fix this?
Thank you

You can use:
$provider = Get-SPClaimProvider | where {$_.DisplayName -eq "Provider DisplayName"}
$mgr = Get-SPClaimProviderManager
$mgr.ClaimProviders.Remove($prov)
$mgr.Update()
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Online Meet-up 29. Is BW provided with AII 4.0 standalone?

Similar Messages

Maybe you are looking for