Online Meeting - Global Game Developers, Friday 11apr08.

Global Game Developers Group (GGDG) announcement:
You are invited to attend our next meeting.
Game developers, artists, game creation enthusiasts, and the general public are welcome. The meeting will be held online. Directions on how to attend can be found below.
Are you working on a multiplayer project without enough help?
Maybe you're just excited about making games?
We are a group of stubborn developers creating games together.
Directions to the meeting
==========================
The meeting will be held online at:
http://www.particlesymmetry.com/rooms/meeting-room.html
The meeting time is:
Friday 11apr08, 8pm Central Time.
Other equivalent USA times:
6pm Pacific, 7pm Mountain, 8pm Central, 9pm Eastern.
Notes:
People from all countries are welcome.
The meeting will be conducted in English.
The software used for communication is written in Java, so install java from the following site if you have any problems. http://www.java.com/getjava
If you are in the usa and not sure what time zone you are in, you can find out here. http://www.time.gov
Questions? Contact SorceryGirl (atsign) gmail (dot) com

I previously had this problem on two 15" MBPs and fixed it on both by downing the following:
1.) Install 10.4.6 update
2.) Delete system keychain entry and any login keychain entries for the wireless network
3.) Go back to System Preferences -> Network and re-enter the login and password for the network.
Since then they have both reconnected to the network automatically with no problem. Before that I had the same symptoms you describe.
Thanks for replying. The issue that I have to go
through with my 15" is that whenever it sleeps or I
reboot I have to turn off Airport, turn it back on,
find my wireless network and reconnect. The guy I
talked to at the Apple store told me that was normal,
but I have never had to do that with other laptops I
have owned nor do I need to do that when I boot into
XP using boot camp. <shrug> Just wondered if that was
common to all MBP's, just the 15 or just mine hehe.

Similar Messages

Not able view full name of external business partner in Lync online meeting.

Hi
I am not able view full name of external business partner in Lync online meeting.it is showing only First Letter and position title.
example( D...Global Team Lead)
It is difficult to find the names please help me, what will be the problem.
Thanks...

Hi,
Did the issue happen for one partner or for multiple partners?
Did the issue happen for single online meeting with external business partner or for multiple online meetings?
Please update to the latest version for Lync server and Lync client and then test again.
In my Lync environment, on a Lync online meeting which included external federation users, I can see the full name of them.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Access denied office 365 / SharePoint online with Global Admin account

Hi All,
I am going crazy since two days solving an issue. The problem is;
I am making a console APP which is talking to SharePoint Online using global admin account (One which was specified as admin while making a new subscription). What I am trying to achieve is, I want to add a custom action using CSOM to each site collection and
subsite of office 365. That code works fine except on the root site collection which is pre-created by office 365 while signing up (i.e. https://xyz.sharepoint.com)
Whatever I do on that site collection, it says gives me below error;
"SchemaVersion":"15.0.0.0","LibraryVersion":"16.0.3912.1201","ErrorInfo":{
"ErrorMessage":"Access denied. You do not have permission to perform this action or access this resource.","ErrorValue":null,"TraceCorrelationId":"2a47fd9c-c07b-1000-cfb7-cdffbe3ab83a","ErrorCode":-2147024891,"ErrorTypeName":"System.UnauthorizedAccessException"
},"TraceCorrelationId":"2a47fd9c-c07b-1000-cfb7-cdffbe3ab83a"
Now the user is global admin. I also added again that user as site collection admin.
The same piece of code works fine on other site collections (search site collection, any newly made site collection...).
here is a code;
using (ClientContext spcollContext = new ClientContext(web.Url))
SecureString passWord = new SecureString();
foreach (char c in strAdminPassword.ToCharArray()) passWord.AppendChar(c);
SharePointOnlineCredentials creds = new SharePointOnlineCredentials(strAdminUser, passWord);
spcollContext.Credentials = creds;
Web currentweb = spcollContext.Web;
spcollContext.Load(currentweb);
spcollContext.ExecuteQuery();
// authCookie = creds.GetAuthenticationCookie(new Uri(web.Url));
var existingActions2 = currentweb.UserCustomActions;
spcollContext.Load(existingActions2);
spcollContext.ExecuteQuery();
var actions2 = existingActions2.ToArray();
foreach (var action in actions2)
if (action.Description == "CustomScriptCodeForEachsite" &&
action.Location == "ScriptLink")
action.DeleteObject();
spcollContext.ExecuteQuery();
var newAction2 = existingActions2.Add();
newAction2.Description = "CustomScriptCodeForEachsite";
newAction2.Location = "ScriptLink";
newAction2.ScriptBlock = scriptBlock;
newAction2.Update();
spcollContext.Load(currentweb, s => s.UserCustomActions);
spcollContext.ExecuteQuery(); // GETTING ERROR ON THIS LINE.
Note: Above error is Fiddler traces.
Nitin Khubani Sharepoint Developer

Hi Nitin Khubani,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issue about
apps for Office. Since the issue is more relative to SharePoint developing, I would like to move it to
SharePoint 2013 - Development and Programming forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Is it possible to make in : Join by phone to online meeting request that the number is shown as hiperlink in outlook??

is it possible to make in : Join by phone tin online meeting request that the number is shown as hiperlink in outlook 2010??
when i send the invitation for example to gmail user I can see it on my phone. but if I would like to call directly from the outlook request I have to copy and paste the number , it is not hiperlinked....
help
any suggestions???

Mine works with the tel URL syntax already in there.
A couple of thoughts, if that's not working for you you could make your own hyperlink to look something like this:
<a href=tel:+556666888888>Join Via Phone</a>
I've seen callto: work as well.
Which you might be able to append into the default meeting invite:
http://technet.microsoft.com/en-us/library/gg398638.aspx
The other thought is to check out Matt's select dial:
http://gallery.technet.microsoft.com/office/Lync-Copy-Dial-Just-Select-3c426244 which would allow you to highlight any number and hit a hotkey to call.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Missing conference ID while scheduling an online meeting

Hi,
I've deployed a Lync server 2010(4.0.7577.0) and an Exchange 2010(14.00.0639.021) for our video/audio calls/conferences.
When I schedule an online meeting in the outlook, I could see the meeting web access link (https//...), but couldn't find the conference ID parameter in this meeting invitation. I assure i've enabled the a/v conference and web conference services in
Lync topology builder, and all server services seems working fine, and my conference policy is set by default.
Are there any other configrations i've missed?
thanks.

sorry, may i know how you assigned a phone number under Conferencing > Dial-In Access Number?
may i have the step? thanks

Looking for Game Developers/Producers and Virtual World Developers for Adobe Research Study

The Adobe User Research Team is interested in talking to game developers/producers and virtual world developers to better understand the development process, the tools/technologies used, and the development/business challenges. Your insights will help us improve our platform and tools as well as develop new solutions. You do not need to be Flash developers to participate.
The research study will be a 2-hour one-on-one phone interview. As a token of appreciation, interview participants will receive a $150 American Express Gift Check.
If this sounds like something you might be interested in, please fill out our short preliminary screener here:
http://www.adobe.com/go/gamedevscreener
If the study is a good match, we will contact you by phone or email to schedule a time.
If you have any questions, please feel free to contact me at [email protected]
Thank you for your interest!
Sara Kang
Adobe Market Research

FYI, this is a poorly worded set of possible answers:
8. How much experience do you have using the following technologies?
I’ve never heard of that technology
I’ve investigated that technology but never used it professionally
I’ve spent some time working with that technology
I am comfortable using that technology
I have used that technology on a daily basis for less than 1 year
I have used that technology on a daily basis for more than 1 year
For a number of these technologies, I've heard of them but have not been inclined to investigate, which seems like it would be useful info to Adobe.

Online meeting - add phone number

After clicking on Online Meeting in Outlook 2010 you have;
TO:
SUBJECT:
LOCATION: Online Meeting
I always want to put in my conf call number and passcode for the invitees. Is it possible to have the Online Meeting change text automatically to where I want them to call?
i.e.
Online Meeting:
1-xxx-xxx xxx (xxxx101) Toll Free:
1-866-xxx-xxxx PC: 123-321-4567 then #

Hi,
You can add custom text on online meeting invitation (add the information in the footer of the invitation interface) with the help of the link below:
http://technet.microsoft.com/en-us/library/gg398638.aspx
Also you can refer to the link below of “How to add custom text to Lync meeting invitation”:
http://hanytaha.wordpress.com/2012/01/11/how-to-add-custom-text-to-lync-meeting-invitation/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Join Online Meeting link launches the Web App even though the Lync Client is installed.

Hello,
I have this problem on a few computers. When I click on the "Join online meeting" button or link (https://meet.###.com/###/1wnj6l1n) the web page launches the
webapp instead of a session in the full Lync client that I have installed (v. 4.0.7577.0). There is not a ?SL= at the end of the weblink.
I searched online to see if there was a registry setting that auto-bypasses the client check, but there isn't. I have tried a repair on the Lync client, but still no luck.
Has anyone else run into this problem?
Thanks.

I found the answer. The Https:\\meet.domain.com was opening in the internet zone with Protected mode on. I added the URL to my trusted sites and it was no longer an issue. I didn't test it but turning off protected mode may work as well.

Online Meet-up 3. Does SAP provide explicit support for ALE?

hi,
yes, it does support.
for details on what is ALE please refer
Online Meet-up, 4. What is ALE?
regards,
arul sekar

Please refer to SLIDE NO: 11 of the On-line Meetup Presentation for details on where ALE fits in SAP context.
It is between AII and Device controller.
regards,
arul sekar.

I tried to join an online meeting. Mozilla rejected the site. I added the site to allowed sites through exceptions but it still won't allow site?

Every attempt to join the online meeting failed. I kept getting a not trusted site message. I could hear the conference call but I could not see the info presentation.

Sometimes, sites divide their content and login logic over multiple servers. In that case, the sites may not recognize that you have logged in if you block third party cookies. Can you check your cookie settings, as described in this article: [[Websites say cookies are blocked - Unblock them]].
During your earlier troubleshooting, did you try the site in Firefox's Safe Mode to rule out an extension as the potential culprit? More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

Apple tools for game developers

Gaming technology has driven Windows to where it is today. In many aspects I see Windows as nothing more than a very robust gaming platform. Microsoft's Direct X 10, though proprietary, is a very formidable tool for developers. Why doesn't Apple do more in courting and aiding gaming developers on their platform? I am seriously perplexed by this. I realize that the game developers that design for the Mac are very dedicated gamers who would love nothing more than make great gaming experiences on the Mac. Most put their hearts and souls into making games happen for the Mac, with little to no support from Apple.
I've done some research into OpenGL implementation on the Mac and I'm surprised at how much Apple is missing in this arena. Especially since so many of their core UI technologies are steeped in OpenGL. Yet Apple tends to be slow in fully adopting and exploiting the newer OpenGL technologies as they emerge. Apple could be a very strong driving influence for OpenGL, but they seem, to me anyway, to have a sort of detached interest in making it happen. For instance, OpenGL 2.0 was ratified on October 22, 2004 and yet Apple has only implemented 70% of the feature-set??? OpenGL 2.1 was ratified on December 1, 2006 and they have only brought 30% of the features to OS X? I look at the drivers for the various cards and compare it against PC drivers and Apple only implements about 75% of what PC drivers have. This has got to be horrendous for game developers.
I see all of this as a critical missed opportunity on Apple's part. I know that Mac game developers have to jump through a lot of hoops to bring PC games to the Mac because they simply do not have the tools that PC developers have. In my opinion this is inexcusable. Apple has a tremendous opportunity to make a singular gaming experience on the Mac. They have a vertical marketspace that has the potential to turn their machines into a gaming juggernaut, yet they have all the appearances of being laxadasical about the whole concept of gaming.
I can only hope that Apple reads this and, more importantly, cares enough to do something about it.

I use photoshop (you can get 6.0 at ebay for ~40-50 bucks - something similar for free would be gimp -> www.gimp.org), povray (www.povray.org), sodipodi (www.sodipodi.com), gmax (www.discreet.com), some selfwritten commandline tools for creating sheets and pngout for compression.
If you need alot of animations it's much easier if you go the 3d route: modeling, texturing, animating. One model = tons of animations. It's also easy to create new animations if you need em. [I'm talking about pre rendered sprites like everyone knows from donkey kong]
Well, you'll need alot of time until you can create decent art. And then you'll need alot of practise, because you are just way too slow.
Here are some examples for whoring and showoff purpose ;)
raytracing (povray)
http://people.freenet.de/ki_onyx/ludo_mockup8.png
http://people.freenet.de/ki_onyx/hq2cpma2r.png
Pretty hard to do. It's all math. You have to write code in the SDL (scene descipting language). Note: the board on image 1 is drawn with Java2d functions - however, the color values were taken from a previous rendering.
pixelated (mspaint, photoshop... whatsoever)
http://people.freenet.de/ki_onyx/evil.gif
http://people.freenet.de/ki_onyx/killbill4.gif
http://people.freenet.de/ki_onyx/favicon2l3.gif
Takes damn long. Even that tiny 16x16 icon took more than half an hour. You'll need lot's of practise for being fast (eg 30mins for image nr2 would be fast).
svg(scalable vector graphics - sodipodi)
http://people.freenet.de/ki_onyx/eye9c.png
Takes also rather long. However it's easier and faster to do than pixel stuff. Also creating sub frames isn't that much work.
photoshopping(uuuuh... photoshop and the like)
http://people.freenet.de/ki_onyx/tr_menu.gif
This one for example was done in some minutes. Noise, motion blur, some text there, rendering filter... done!
Oh and having a scanner is nice. You can use scanned sketches for everything (except povray heh).

Director 11 - Live Online Meeting

Hi folks,
on
Tuesday, June 3rd @ 9am EDT we will hold a
live online meeting with users and the Adobe Director Dev
Team to
demonstrate and discuss bugs and quirks in Director 11 and
of course have a Q&A session.
This meeting will be an Adobe Connect live meeting incl.
screen-sharing, VoIP audio, chat and more.
If you have any bugs or quirks to present and discuss, please
let me know so I can add them to the agenda.
http://adobechats.adobe.acrobat.com/directorforum/
Log in as guest and enter a user name.
What's
the exact time in your time zone?
Cheers,
Martin

Hi,
thanks a lot to all of you guys who attended todays meeting,
which hopefully was the first in a series of upcoming meetings.
Thanks also to the Adobe Director Dev team and I really invite you
to attend future meetings, because this is a great chance for you
and us to get a little bit closer.
We had a peak of 51 attendants, which is great especially
because it was very early at least for US west coast Director
users.
Sadly I forgot to record the meeting and I'm really very
sorry about that (was just to nervous and busy to remember that
record button). I promise, that I will post a summary on
directorforum.com by tommorow.
I'm sure we will repeat these meetings and I hope that some
of you will have ideas and are willing to present to the community
and to the folks at Adobe.
Cheers and thanks,
Martin

Conversion to Online Meeting

In Lync, how would I convert one occurrence of an in-person meeting in a series to be an online meeting?

You can refer to the following article for more details:
http://office.microsoft.com/en-us/communicator-help/work-smart-schedule-and-join-an-online-meeting-HA101871367.aspx
Regards, Kent Huang TechNet Community Support ************************************************************************************************************************ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark
as Answer” if a marked post does not actually answer your question.

When printing a Lync Online Meeting from Outlook 2010, it prints out xml code?

I have a couple of users that whenever they go to print out Lync 2010 Online Meetings from outlook 2010, it prints off a bunch of xml code and extra info (UCCCapabilities, UCInband, UCMeetingSetting, UCMeetingSent) all in XML.
Any ideas why it would be doing this, and only affecting a couple of users?
TAG

The following fix worked in our Exchange 2010, Lync 2010, environment.
Symptom
In Outlook, when users are printing (or print previewing) Lync
online meetings on shared calendars, an XML code is included in the printout.
Cause
When the shared calendar is opened, the folder is being
reported as read-only despite the user having read-write permissions. The Lync
add-in writes a property to the item (this succeeds) and then to the folder
(this fails) so then the code is not run that would mark the property as the
item as non-printable.
Possible Resolution
If the owner of the calendar creates an online meeting one time on their own calendar, this will
result in the property being created in the calendar folder. Then when a
delegate subsequently creates an online meeting on the calendar, the property
will already be on the folder, so the Lync add-in will not try to add it. This
avoids the error condition, and the property on the item will then be
successfully flagged as non-printable.
This worked for me. My user was a delegate for the managers mailbox. When she created an online Lync meeting on behalf of the manager, the meeting attendees would see the xml code in print preview as well as the printed document. The simple fix, as described
above, was just to access the managers Outlook profile from the managers computer, and create and send out an online Lync meeting (to one or more recipients, shouldn't matter). That's it. Now when the delegate goes to create any new online Lync meeting on
behalf of the manager, the visible code is no longer present. This works, as the description above says, because "the property will already be on the folder (after the manager creates an online Lync meeting on their own calendar), so the Lync add-in will
not try to add it. This avoids the error condition."

How To Create Lync Online Meeting Using EWS

Does anyone know how to create a Lync Online Meeting Using EWS (Exchange Web Service API). The exchange version I'm using is 2010 SP2.
I'm able to successfully create a regular meeting/appointment using EWS and now I'm trying to create a lync online meeting using EWS which will incorporate the lync online meeting URL in the invite that gets send out to attendees.
I'm using C#. I have try setting the Appoinment IsOnlineMeeting property to true but I'm not seeing any changes it is having. I see that the Appointment object also has a JoinOnlineMeetingUrl property which I have tried to use but I got an exception because
my exchange version is 2010 and it requires the 2013 version.
I've been researching this for a couple of days now and I've yet to find a solution for it. Any help would be appreciated.
Thanks,

Hi.
I see that you have the same problem. I'm trying to create an online meeting with EWS (or UCMA 3.0?) without results. Have you resolved? Can you post your code?
Thanks in advance.

Online Meeting - Global Game Developers, Friday 11apr08.

Similar Messages

Maybe you are looking for