Online Number not working even after changing priv...

Hello all,
I'm having problems with my online number,
I can't dial into it - I've changed the privacy settings but no go,
I can dial out and the number appears on the receiving phone,
Any suggestions ?

Hii there,
I am also experiencing this issue....Anyone found a fix??

Similar Messages

HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

I would be worried about that - but it may turn out to be nothing.
Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

30EA1--Database Diff not working even after changing Tools Preferences

Trying to use Database Diff but even after changing Tools > Preferences > Database > Licensing, I still get the error message saying I have to make changes to the Licensing check box. Anyone have a workaround or experience the same problem?

When you connect to any database error disappears, but still it's a bug.

My online Number. not working. it is busy sound wh...

my online Number. not working. it is busy sound when I call my online Number, please help.
Solved!
Go to Solution.

bbdc07 wrote:
my online Number. not working. it is busy sound when I call my online Number, please help.
Hello,
First check that your privacy settings are set to ''Allow calls from anyone''.
Then change them to "Allow SkypeIn calls from Only people from my Contacts List".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
Change settings back to "Allow calls from Anyone".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

Webcam is not working even after I reinstall the system software

My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
Tian

Update, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.

All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.

Window 10 upgrade. Graphics driver not working even after re-install

Notebook pavilion DV6 3280. Just upgraded to Windows 10 and AMD graphics driver not working even after re-install. What do I do? Is there another driver not on the HP Website that I should try?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

HK Online Number not working

Hello. I paid for a year subscription for a Hong Kong-based online number about a month ago for work purposes. My coworkers and clients have tried calling the number, but the service does not appear to have worked at any point, or been activated. They hear something like a busy signal, but no ringing.
I don't have this problem at all with my personal U.S.-based online number.
It would be great if I could get help with getting the HK online number to work as it should. If it can't be made to work, I would appreciate having the number cancelled and the subscription fee refunded. Thank you.

Are you getting a busy when you call? If so please try this:
First check your privacy settings are set to ''Allow calls from anyone''.Then change them to "Allow SkypeIn calls from Only people from my Contacts List".Save and wait for 5 minutes.Log out from your Skype account and log back in. Change settings back to "Allow calls from Anyone". Save and wait for 5 minutes.Log out from your Skype account and log back in.
If not, please explain what is happening when you call this Online Number.
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Touchpad does not work even after format - x220t

Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
steve

xyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

MacBook Keys not working even after KeyBoard Firmware update

My friend's sister bought me a MacBook from the US last October. Fortunately, Apple announced the release of Leopard also on the same month and I got a free upgrade to leopard. I installed leopard about 3 months back. My keyboard was working fine when I had Tiger installed. After I installed Leopard, I remember installing a Keyboard firmware update once through the Software Update.
About two three weeks back, my MacBook started acting wierd. Some keys were not working (mostly 't', 'q', left shift, left command, zero which is not working even now. I couldn't close the last bracket because the key is not working. I am a php programmer and I can't think of living without the closing bracket and zero keys . But most of the keys works on and off.
After seeing on several sites that it is a problem with firmware, I once again downloaded the firware update, but couldn't install it since the installation wizard says that my system doesn't need it.
Can someone plz tell me what to do now? Will reinstalling help?
Thanks in advance.

The problem persists everytime I restart my system or wake it up from sleep. But each time different keys have problem. I am now downloading update 10.5.4. Can someone plz help me?

Online Number not working even after changing priv...

Similar Messages

Maybe you are looking for