Online Radhat linux and sunsolaris shell means with out installation I use

Hello every one,
1.can any one tell me how can I use online red-hat Linux shell (means with out installation I use online Linux shell or terminal).
2. how can I use online sun solaris unix shell (means with out installation I use online sunsolairs shell or terminal).
Thanks ,
Regards,
Shahbaz khan

Remote access to a Linux/Unix based system is usually accomplished by screen sharing using VNC, or by a remote text based terminal session using ssh and telnet. The use of Telnet is generally considered obsolete and has been replaced by ssh for security reasons. You can also tunnel X-windows through ssh to to run remote X-windows applications on the X-windows server running on your client PC computer.
The software you need for ssh or VNC will depend on your preference and current client operating system. If you use e.g. Apple MacOS X, you will not need to install any additional software. If you use Windows you can download free Putty for ssh access, or RealVNC client.

Similar Messages

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

Maybe you are looking to re-purpose this equipment versus getting rid of it if so, the best thing to do is search the internet for tutorials. And I say this because it's what I would do, there are a lot of tutorials online. Hope you can find good use for them. Worse case scenario if you can't find something right now, package them very nicely and when you come across something unbox and enjoy. I've re-purposed a mac color classic and LOVE IT!!

Happy Holidays. I have Adobe Actobat 7.0 Standard for quite a while, and I'm happy with it. I use it for mainly filings at the federal court. They require PDF. I use two computers in two different states for work. I realize my Adobe 7.1 is a few years

. I have Adobe Actobat 7.0 Standard for quite a while, and I'm happy with it. I use it for mainly filings at the federal court. They require PDF. I use two computers in two different states for work. I realize my Adobe 7.1 is a few years old, but sometimes I have difficulty using it with the other days downloading a boarding pass, and e filing at the USDC. . There's a problem with Adobe Flash, media, etc. and other Adobe programs, (which I use for downloading boarding passes for airlines, etc.) so basically I have to delete these other Adobe programs, besides the Adobe Acrobat 7.0 Standard if I want to 7.0 Standard to work. I periodically download the updates, but there's still a problem. My question is: Can or should I purchase another program to update the present Adobe Acrobat 7.0 standard, or just buy a new program such as the Adobe 11? Am I mistakenly doing something wrong, such as when I download? I'm an old valued customer so I don't want to spend a lot of money since I am replacing my Dell XP for a new computer now, and my other computer is a Dell Vista.
I'd appreciate your valued advice.

If you are getting a new computer (for a PC it would have Win 7 or 8), then you will need to purchase XI if you wish to continue using Acrobat. Acrobat 7 is not compatible with these systems (and probably the same for MAC systems), though sometimes workarounds are possible, though not easy to use. I guess the answer is to buy the new version. Try http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html, click on the Buy for Acrobat, and then select the version you want.

I download Flash player, proceed through the steps, but it takes me to a page where Adobe wants me to buy photoshop and other products and no way to bypass this and just get on with the installation without buying anything. Anyone out there know how to d

I download Flash player, proceed through the steps, but it takes me to a page where Adobe wants me to buy photoshop and other products and no way to bypass this and just get on with the installation without buying anything. Anyone out there know how to do it?

Hi mansons67992701,
No purchase is required to install Flash Player. The offer you're seeing is optional. There should be a yellow 'Install Now' button on the bottom right of the page. Is the button not displaying? Please post a screenshot of the page (How to post a screenshot in the forum).
Maria

I have a att iphone 4s and i have service with sprint can i use it on sprint?

I have a att iphone 4s and i have service with sprint can i use it on sprint?

Thank you guys so I figured out how to use it I have a cheap android phone on sprint I use google voice on my phone 4s and I can make calls and text messages also use FaceTime and iMessage. So I'll just trade it or sell it and buy a sprint one until then ill use google voice

I can't seem to sync my contact on my ipad. the contact list is a book type and I can't figure out how to use it

I can't seem to sync my contact on my ipad. the contact list is a book type and I can't figure out how to use it

Look at Chapter 13 of the iPad iOS4.3 User Guide

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten.

I recieved an Adobe Master Collection License number from my school (Stevens Institute of Technology) and I can't figure out how to use it in order to get the product. I've created a username and that's as far as I've gotten. I need to download the product and I can't figure out where to begin.

Ask someone at your school... Do you have a Cloud redemption code, or a CS6 serial number?
If Cloud, Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html and
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
If CS6, download at Other downloads and enter your serial number when prompted
Again... your 1st resource is your school

I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user...

I just upgraded to mountain lion and I can't figure out how to use messages... it wants me to use AIM or something like it, but I can't change the user... How do I do this??

See this Thread

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Browser oppen and minimize fine but webpages do not. how do i get it to open to the size of the browser and stay that way with out zooming all the time

I can not get a webpage to stay the size of the browser with out zooming in every time i go to a web page. With out zooming it just stay small with white on both sides. How do i get it to stay the size of the browser and stay that way Have no trouble with my internet explorer doing this on my new computer. or fire fox on my old computer.

You can use an extension to set a default font size and page zoom on web pages:
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

TS1363 i have and ipod touch the with out the camera how do i get my facebook back when i try it said i need iso4 donot know what that is plz help

hi can you help me get my facebook back on my ipod touch. i have ipod touch with out the camera.

It sounds like you may have a 2nd generation iPod. If so, it can not be upgraded beyond 4.2.1. The Apps you are trying to load are compatible with a higher version of the iOS.

Display MM03 screen with out selecting views using interactive list.

Hi Experts,
I have one query, I am displaying material data in a list. when i click on material number in the list it should show material data i.e should call MM03 with all the view data .
When i am using call transaction 'MM03' skip first screen. I am able to call MM03 screen but unable to skip the View Pop up screen it should be selected default and the veiw data should be displayed.
Ex: when i am clicking on materil number from the list it will directly take to the Basic data1 screen with out the pop up screen for selecting views.
hope this is clear...
Thanks
Sunil kairam.

Hi Dzed Maroz ,
Thanks for the quick reply... its works.. !
Can you please tell me the methodology behind SET PARAMETER ID 'MXX' FIELD 'K'.
I was trying using below code earlier was showing the pop up screen.
SET PARAMETER ID 'MAT' FIELD P_MATNR. "
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
but now it works... thanks..
kindly explain SET PARAMETER ID 'MXX' FIELD 'K'. hw it works... which filed parmeter id is MXX and y we have choosen 'K' ??
Thanks & Regards
Sunil kairam

Import Oracle DataBase dump file Into Sql Server With out connection oracle using c# code.

Hi All,
I would like to ask how can imports my dump oracle database file data and struct into sql server 2005
with out make connection oracle.
best regards.
Hakim.

Hi Hakim.
Based on your title, what I understood there is a issue regarding transfer oracle db dump to sql database using C# code. Am I right? If so, I am afraid there is no build-in method which meet your requrements in .NET framework. You must provides
OraDump Export API to allow developers integrate corresponding capabilities into their applications. These capabilities are about export data from Oracle dump files into popular databases like Microsoft SQL server. Every developer
having OraDump Export API can write just few lines of code on C# or Visual Basic to implement the appropriate export process.
I am search a third-party link, but it's a paid service.
http://www.convert-in.com/data-migration-service.htm
If you don't have to with code, Please refer to: Migrating Oracle Databases to SQL Server 2000
http://technet.microsoft.com/en-us/library/cc966513.aspx
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Synchronize my media from Linux and Windows shared locations with iTunes to iDevices?

Hello.
Is it possible for an updated 32-bit Windows XP Pro. SP3's iTunes to synchronize/import my MP3, OGGs, WMA, videos, etc. from network shares (Samba with Windows and Linux)? Or do I have to copy all the files (huge!!) to the local HDD for iTunes? I just got a iPod Nano (6th generation and 8 GB). I keep all my media in one location for all computers and devices to share.
Thank you in advance.

Hi again.
Thanks all. It looked like I was able to get iTunes to show my almost 11 GB of songs (5.5 days to listen to all). Some of the WMA were converted. Obviously, a few OGG files weren't. It took a long time to finish (ran it overnight). I was able to synchronize most of them to my iPod Nano even though it only can hold about 7.25 GB of it.
Is it me or is adding new songs tricky? I even told the new iTunes installations to scan for media, but they didn't do anything. I did this with two different updated Windows XP Pro. SP3 machines. I had to drag and drops my music into iTunes' playlist (new one). Weird.

How do I upload a widget to the online apple dashboard and share my widget with everyone around the world?

I work for a company that has developed a widget that will be really helpful for lots of people to look up information. I would like to add it to the Apple Dashboard so anyone can download it. How do I do this?

as I explicitly wrote in my first post:
of course my iPhone is already synced to the same computer!
I wanted to add a movie on my iPhone today on the same computer and through the same iTunes that I already synced my iPhone with and when I wanted to upload the movie onto the phone it told me that I am now using a different library and that everything on my phone will be deleted. I also tried to do it manually because I don't want to waste time by backing up the phone, erasing everything from it and then putting it back onto the phone, and iTunes told me the same thing: that I am using a different library etc etc.
the other day I wanted to put a new ringtone on my iPhone and iTunes did exactly the same thing!
how can I be using a different library on the SAME COMPUTER and on the SAME iTunes for different things that I want to put on my iphone?
another thing:
if using iTunes indeed were as simple and as easy as you say it is, then there wouldn't be as many complaints about it as there are. also: calling someone ignorant just because they don't want to be bothered by the restrictions, complications and unfriendliness of iTunes is pretty lame!

Online Radhat linux and sunsolaris shell means with out installation I use

Similar Messages

Maybe you are looking for