Online recovery & solairs installation

hi
1) i have a dought in recovery.If i take a cold backup instead ofa
online backup,If a datafile corrupted or tablespace corrupted can i
do the following steps to recover the tablesapce while database is open
if i am not doing online backups.( My database in archivelog mode ).ny
db version is 8.1.6 not using rman
1)take tablespace offline
2)restore from the last cold backup
3)recover the tablespace by appying logs by issuing recover tablespace
4
4) take the tablespace 4 back online;
2)I downloaded solaris 9 for intel,its in a iso format.How can i write
the downloaded software to cd.Last time i wrote to cd but its not
working.How can i write that enables to install(the ISO format)
with regards

Hi Ardhian,
Tried as per your suggestion but faced below errors:
CREATE CONTROLFILE SET DATABASE "Q50" resetlogs archivelog;
CREATE CONTROLFILE SET DATABASE "Q50" resetlogs archivelog
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file '?/dbs/[email protected]'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
i tried the above cmd when DB was in nomount state**
Regards,
Sohal...

Similar Messages

OS X Mountain Lion Online Recovery?

Ok so I made this huge mistake in which I literally deleted EVERYTHING in my "TOSHIBA HD". No partitions, recovery disks, anything. Luckily, I had bought Mountain Lion from the App Store before the mistake and was able to make a boot DVD BUT once it reaches towards completition, some kind of error "could not download necessary files to install OS" appears.
... and I take a deep breath and search for solutions from my phone and find this "online recovery" thing. I follow the instructions (command + F on startup) but when I finally reach recovery mode, it turns out to be Lion Online Recovery, which prompts me a Lion installation via the App Store. I never bought Lion so there isn't much this recovery mode can do for me. But then I find out there's a Mountain Lion Online Recovery and after several attempts to reach it, I keep getting the Lion one.
How can I boot in Mountain Lion Online Recovery in order to download it from the App Store and FINALLY use my precious MacBook?

While we all have MacBooks in this forum most of us don’t run Mountain Lion. There's a Mountain Lion Support Community where everybody has Mountain Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/os_x_mountain_lion

LAGS after online recovery

MacBookAir4,2.
I've installed Lion using online recovery days ago.
Then it started lagging...when scrolling, expanding...
It drops frames and run slowly especially when i play the Chess. Performs as a cheap computer made 10+ years ago.
I'm sure these was still happening after spotlight indexing has been complete.Repairing disk permissions didn't help, as well as changing a user account.
and:
I've erase the disk before installation. It's almost empty now.
Then I did an online recovery again...still lags.
It actually became to run a little faster after update, to Maverick. But still, LAAAAGGGGSSSS.
Apple Hardware Testing detected no problems.
Xbench results: 233 (is this a normal result for macbookair4,2?).
Anyone help? Many thanks.

Hi Ardhian,
Tried as per your suggestion but faced below errors:
CREATE CONTROLFILE SET DATABASE "Q50" resetlogs archivelog;
CREATE CONTROLFILE SET DATABASE "Q50" resetlogs archivelog
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file '?/dbs/[email protected]'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
i tried the above cmd when DB was in nomount state**
Regards,
Sohal...

DPM 2012 R2 Online Protection - Online Recovery Point Creation Failed

Hi
We are moving from protecting our DPM server with another server to use an Azure Data Vault. 2 of the Protection Groups work fine, but the third - protecting a pair of Folders - fails. On the DPM MMC it shows Online recovery point creation
failed, and in the Event Log it shows -
Creation of online recovery points for D:\ on blah.blah.co.uk have failed. The last online recovery point creation failed for the following reason: (ID: 3188)
The operation attempted cannot be performed at this time because a backup or restore operation is currently running. (ID: 100049)
The DPM server is the only one conducting any backups. The target server is Win 2003 (for the moment).
Could anyone give me any pointers?
Thanks

Ok, nobody any more ideas?
The latest test involved 9.75GB on the protected server. I created the protection group and this was the outcome:
Replica volume: 15.98 GB allocated, 0 KB used | Recovery point volume: 3.70 GB allocated, 0 KB used
I then create a recovery point and then deleted all 9.75GB on the protected server. And did a full restore from DPM. It then gave following outcome:
Replica volume: 15.98 GB allocated, 9.85 GB used | Recovery point volume: 3.70 GB allocated, 654.86 MB used
Then after the creation of the first recovery point (sync + recovery point), I get this:
Replica volume: 15.98 GB allocated, 4.79 GB used | Recovery point volume: 13.70 GB allocated, 3.27 GB used
As you can see DPM took the 9.75GB and added it to the recovery volume. And strangly it took away half of the replica volume.
In addition I get 3 entried in my logs:
1) The used disk space on the computer running DPM for the recovery point volume of E:\ has exceeded the threshold value of 90% (DPM accounts 600 MB for internal usage in addition to free space available). If you do not allocate more disk space,
synchronization jobs may fail due to insufficient disk space. (ID: 3169)
2) Synchronization jobs for E:\ on ****** have failed. (ID: 3115)DPM has run out of free space on the recovery point volume and will fail synchronization for E:\ on ***** in order to prevent existing recovery points from being
deleted. (ID: 30195)
3) Creation of recovery points for E:\ on ****** have failed. The last recovery point creation failed for the following reason: (ID: 3114)DPM does not have sufficient storage space available on the recovery point volume to create
new recovery points. (ID: 214)
I hope someone can help me with this.
regards,
Maurice

Equium A100-549: Blue Screen error during Recovery CD installation

Hey,
I recently purchased a Toshiba laptop, everything worked perfectly until my laptop was attacked. I got rid of the virus and went to reformat due to lots of problems occurring. The main one being a error has accursed and "Blah Blah" program needs to close. Also i kept getting loads of errors.
http://aumha.org/win5/kbestop.htm
Them types.
Now then the Toshiba reformatting disk said simply put the disk into the CD drive and turn off. I did this, great. The toshiba disk said press F12 upon starting and click run the CD. The CD fires up and gets half way thro reformatting.
I suddenly get a blue screen error. I thought oh well ill reboot and carry on. This is where the problem started. Because i was half way thro deleting/reinstalling windows i was missing some files. I go to reinstall or try to use the Toshiba CD I get a blue screen error.
0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online Win XP Resource Kit article, or see Windows 2000 Professional Resource Kit, p. 1548.)
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).
Any ideas what i can do? I don't want to send the laptop back to Toshiba to fix however im thinking this is the only way out.
Please if repplying try to keep technical lanuage to a minnium. Many thanks, Dan.

Hi
Its very strange because the installation from the Toshiba recovery CD should works properly and without any Blue screen messages.
Usually if the BSOD appears if there is a serious software problem or something wrong with the hardware.
I dont think that the software on the recovery CD could be corrupt.
Did you try to install the OS from original Microsoft Windows CD? It would be very interesting to know if the blue screen will also appear.
However, I think your notebook is new and the warranty is valid. In my opinion you should ask the Toshiba service partner for the help because the guys could start the diagnostic test and could locate the fault.

Windows Vista / 7 Recovery manager installer?

I have a TX2500. Recently, the OS was corrupted warranting a format and reinstall.
Since I was unable to enter Windows to do this, I was unable to restore from the recovery manager. F11 doesn't work.
I don't have the ability to create a recovery disk, or USB drive, because I am unable to get into windows.
What I have been able to do:
reinstall a different OS (windows 7) without a product key for the purpose of troubleshooting only.
What I need to do:
Install the HP Recovery manager into windows 7 in order to a) run recovery from my recovery partition, or b) create a recovery disk / USB.
I am absolutely baffled that the recovery partition is not a stand alone installation, and instead requires a program to be installed and run from a functioning windows installation.
In order to install windows again, I need the recovery manager. In order to get the recovery manager, I apparantly have to reinstall windows.
After scouring the site, I've found a dozen references from "hp employees" to recovery manager patches. These do not help me, because I no longer have recovery manager.
All I need is the full installation for Windows 7 recovery manager, or some other way to access this apparantly useless lump of wasted hard drive space known as the "HP_RECOVERY" partition.

Thanks for the download.
Well, I've tried that download every way I could think of on multiple computers. All that ever happens is the file is unpacked, a "power recover" icon shows up on the taskbar (in the running programs section) for several seconds, then disappears. When running the installer directly from the unpacked files, the same thing happens.
I've tried this most recently on a clean format / install, then unpack / run the file, then restart when it finishes. Nothing appears under installed programs, nothing comes up when searching for it.
Each of the computers I've tried this on is running Windows 7. One of them is an identical laptop with the same recovery partition that was formatted and had Windows 7 installed on it a while ago. The only HP software it has are the drivers.
I don't have any versions of vista lying around, other than the inaccessible data in the recovery partition. I'd have to dig around a bit to find an old version of XP to try that, but I really haven't had time to do that recently. Ideally I would like to be able to install the HP Recovery Manager in windows 7, and use it to a) restore the stock version of vista on the laptop, or b) create a backup disk, and use that to install the stock version of vista to the laptop. The reason I can't just leave windows 7 on the laptop is because it's the installer for another computer, and I don't have a license for it.
Can you think of any other installers that work to put the recovery manager on a windows 7 computer?

DPM (2012R2 ur 4) Azure Online recovery point creation fails

HI,
I am using SCDPM 2012 R2 UR4 to backup some files on premise. I created a backup vault - installed the Azure Agent on DPM (registered it), I downloaded the Azure Backup Vault credential file and provided it during registration process (it showed the correct
subscription and region) and configured online backup.
The backup to azure fails with Windows Azure Backup Agent cannot connect to the OBEngine service.
I already re-started the service - no problem. No firewall locally - not sure what ports are required on outgoing company firewalls (didn't see anything in the documentation). I also created a new backup vault in azure and did the same procedure again. But
the result is the same. Please does someone have any other ideas?

Hi,
Are there any events in the application event log after the failure ?
Can you look in the CBEngineCurr.errlog in the C:\Program Files\Microsoft Azure Recovery Services Agent\Temp directory after the failure and see if you can find an error that will point you in the right direction.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Satellite Pro C650: Questions regarding Recovery disk installation

Hi
can someone please give me a little bit of help?
I am having to buy and install a recovery disk for my Sat Pro C650.
When I get it do i just plug in and play it. I have also lost windows 7 which was pre-installed, or would I then need to also buy a new copy of windows 7 and install that too?
Will it then just go back to how it was when we brought it.
Or do I need to do something else after the recovery disk is installed.
Thanks
Tina

Hi Tina and welcome to our Toshiba community.
Here is my comment to your posting:
Every new Toshiba notebook is delivered with original preinstalled operating system and saved recovery image on HDD. There are two possibilities for OS installation:
-usage of HDD recovery installation and
-usage of recovery DVD that must be created by notebook owner.
Toshiba recommends creation of DVD disc. Why? If something goes wrong with HDD (defective) you can built-in new HDD and use recovery disc to have factory settings again. So please, if possible, create this recovery disc as soon as possible.
Back to your questions:
> When I get it do I just plug in and play it. I have also lost windows 7 which was pre-installed, or would I then need to also buy a new copy of windows 7 and install that too?
Usage of DVD is simply:
Start your notebook and press F12 to enter boot options menu
Put recovery DVD into optical disc drive
Choose CD/DVD device on the menu and press ENTER
Follow what happen on the screen
> Will it then just go back to how it was when we brought it.
Yes.
> Or do I need to do something else after the recovery disk is installed.
No. Everything will be installed automatically.
If you have more questions you are welcome.

Error during recovery -- Windows installation cannot proceed

I have a Satellite A355-S6925, and I tried to reset my computer by pressing 0. Now I'm getting this error.
The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, then restart the installation.
Now what? If I click OK, it just ends up back at the same error.

Never mind, I got it. I just held 0 again to start it over.

Need System Recovery Disc Installation Instructions (not creating Disc)

Does anyone know where I can get a printed set of instructions for using my system recovery disc, so in case I'm out of town my wife will be able to perform the operation? I made 5 dvd's, but she keeps asking for a set of instructions. Will appreciate any help. Thanks.

Which computer?
-Jerry

DR (Disaster Recovery) server installation.

Dear Experts,
We have one server for BI PRD. We are not using it at the moment. We wish
to carry out DR (Disaster Recovery) trial on this server. Regarding thiswe have following queries :
1. Do we require separate SAP License key for this server when setup forDR (already SAP license key exists for it as BI server)
2. We will re-install BI on the same server after our DR test so whetherwe need to regenerate License key for BI or not?
3. We have two R/3 PRD servers in HACMP mode in SAN. Can we take the
backup of R/3 PRD and restore it on DR Trial Server? If yes, whether we
will face any problem for existing PRD server?
4. Whether Existing PRD and Trial DR Server will clash or hang since
these will be in the same local network and SAN
Please advise.
Regards,
Kailas Padwale.
BASIS Team.

Hi,
As per your query you have not mentiones here what is your opreting system and whcih SAP verson you are using. If any one need related to implimentaion then we keep in mind to os,sap version,database etc.
Your Question: If you want to DR of PRD then you have to get my answer.
1. Do we require separate SAP License key for this server when setup forDR (already SAP license key exists for it as BI server)
ANS= Yes you can generated from SAP Site becasue now this is BI and you want to DR but for this you have not paid any thing to SAP its free.
2. We will re-install BI on the same server after our DR test so whetherwe need to regenerate License key for BI or not?
ANS=NO becasue you have to use only PRD copy you can not run BI here otherwise how can you say this is DR server. DR Server means you can copy in existing running server, in case you running server get down then within short period you can provide the solution. After rectificaton actual server you will shift in old one.
3. We have two R/3 PRD servers in HACMP mode in SAN. Can we take the
backup of R/3 PRD and restore it on DR Trial Server? If yes, whether we
will face any problem for existing PRD server?
ANS=You can restore backup but you have to take backup only one PRD server and restore it in DR. Just chang your IP Address and rest can be same. You will not face any issue on this if you run in the same network. I will recmond if you use database in DR server itself then good for your running system will not impect.
4. Whether Existing PRD and Trial DR Server will clash or hang since
these will be in the same local network and SAN
ANS= No because you will use seprate IP address and data will be in DR server not in SAN.
In case you need more help, pls get in touch.
Anil

Windows 7 Professional Recovery/Full Installation Disc

I would like to format and reinstall windows 7 Pro on my HP Pavilion dv6 laptop. When I ordered my computer a couple of years ago, HP did not send a recovery disc. After reading a few forum postings I found a website (best-windows.vlaurie.com/boot-disks) that offers an .iso copy of the full install disc. Has anyone heard of this site, used it to download the .iso copy or know if it is legitimate? If you did download it, did it work properly?

@tracted
Windows 7 Recovery (reinstall):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
Also see>>Creating Recovery Media >> Windows 7
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Zen 20g recovery firmware installation help plea

Hi,
I have a brand new Zen 20g and have installed the s/w onto my pc (XP) and am trying to connect the player. I had constant problems so rang support and they sent me the recovery firmware so that I could re-install the firmware. I managed to delete the firmware on the device, but am having SO much trouble installing the new stuff. I get to the point where the device says to initiate the new install via USB, so I click the Zen__00_02.exe and select English for my language, and then nothinhg seems to happen - but if I disconnect the device I get a popup saying that the device is disconnected.
I can't seem to find any info on installing firmware - ie what it should look like. Can someone help please?
Thanks.

Never disconnect a player when running a firmware update, you could damage the player beyond easy repair. If you must disconnect (because the update isn't happening) wait at least 0 or 5 minutes before disconnecting, at which point clearly the upgrade isn't happening.
You might be better to reload the OS, that is to erase the firmware on the player itself, then connect it to the PC and reload. If this doesn't work on your PC then install the drivers on another PC and try there. If this doesn't work either then you'll need to contact Creative Support again.
I'm not exactly sure how you get into the rescue mode with the Zen 20Gb, but I assume you either keep the power switch or play held down, then press the tiny reset switch.

Recovery disk installation progress seems stuck?

I have an HP Pavillion desktop whose hard drive completely died so it was not possible to boot from the recovery partition stored on it. I replaced the hard drive and ordered the recovery discs from HP. Three discs arrived: two system recovery discs for 32-bit Vista and one supplemental recovery disc.
I got through the two system recovery discs after many hours. Now it's at the point where it's able to boot without the recovery discs and is supposedly copying files in to place. The only problem is that on the screen is the Windows animation of file copying (the two folders with pieces of paper flying between them) but no hard drive activity. Considering how long the system discs took to complete I let it sit over night. This morning when I woke up it was still in that state. If I use Alt-Tab to see what's running there are two Command Prompt processes and the "Progresso" process. I can't switch to any other process to see if there are any error messages, only the flying folders will be shown.
It should not take as long as it has to restore the operating system on this computer (it has been running all weekend). Is there any way to tell if it's making progress and/or any other diagnostic information?

Hi:
I don't know what the issue is or how to fix it, but it shouldn't take more than 30 minutes to an hour at most to recover the PC using the recovery disks.
Paul

Online version iPod installation CD?

Does anyone know if there is an online version of the CD that comes with iPods?
I´m on internship in small Mexican town and my iPod mysteriously lost all my music (the songs have disappeared, but it still says 18.5 gigs are being used on it). There´s a computer lab nearby that has a few computers with iTunes. I´d like to see if opening my iPod through iTunes will show any of my music, however I need the CD for the computer to recognize my iPod.
If anyone could send me a link that would be wonderful. OR if anyone has any other ideas about what I can do to get my music back that would be awesome. Keep in mind I can´t restore it right now because all my music is far far away at home in the US and restoring it would completely delete all of it (right now its there, just not showing up).
Thanks!
Emac G4 Mac OS X (10.2.x)

You can download iTunes and the iPod updater from Apple's web site; nothing else is required from the CD to use the iPod on your machine.
(12650)

Online recovery & solairs installation

Similar Messages

Maybe you are looking for