Online Services encountered an error

When attempting to Publish a 40 min video to Adobe Revel from Adobe Premiere Version 12.1  I receive an error message "Online Services encountered an error" popup window when attempting to finish the last 5 seconds during the "Upload" process.
I have attempted to Publish this video for two days making six different attempts with the same error.
I have published other video using the same process in the past.
Background and steps taken
Annual unlimited Revel member
Re-booted PC  - did not help
Below are screen shots taken
Attempted BOTH by Cancel and ran the entire process (over and hour)
AND "Try again and resumed Upload"
Resulted in same error message always during the last 5 seconds of the uploading process
javascript:;
Message was edited by: Bruce Herz Update: Tested Publishing to Adobe Revel with a small 30 sec video using the same PC and process. Worked as expected
Message was edited by: Bruce Herz
Attempted to Publish full length 40 min video again on 6/30/14 , still same error message
Published to DVD works as expected.
But, still have to publish to Adobe Revel .

Sorry to say the issue continues, in spite of the last successful upload of a previous small video.
It seems that the direct upload from Premier 12 to Revel works fine for small video. But when attempting a larger on (over 40 min)
It continues to fail in the last few min of the upload process.
The same large video can be rendered on local PC as a movie and then uploaded to Revel from the browser.
I am using the same account 0374451202 and the email address used for this forum.
Thanks

Similar Messages

  • I am unable to have photos processed from my Photoshop Elements 11 program directly to Costco due to the fact that I am now receiving a error statement saying: "Online services encountered an error. The service will now be terminated or paused if possible

    I am unable to have photos processed from my Photoshop Elements 11 program directly to Costco.  I am now receiving a error statement saying: "Online services encountered an error. The service will now be terminated or paused if possible. 7: NULL ==*in Attributes." How do I get the online services back and running on my PS to allow me to have my photos processed by Costco online? 

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • PSE 6 - Windows Vista - "Online Services encountered an error. The service will now be terminated or

    I have been uploading photos to SmugMug for a while. yesterday I started getting the following error:
    "Online Services encountered an error. The service will now be terminated or paused if possible. (Error7: NULL==*inAttributes)"
    I started getting errors yesterday. I was uploading and kept getting errors I finally got this error message. I have tried uninstalling and reinstalling the software an am still getting the same error.
    I am running the software on an HP Pavilion 9600 Running Windows Vista.
    Windows Vista Home Premium - SP 1
    AMD Turion 64 Processor
    3.75 MB Ram
    Operating System: Windows Vista
    Browser: Mozilla
    Printer model / driver version: Canon Pixma IP4500
    Video display card / driver version: No Idea
    Scanner / driver version: N/A
    Type of network (server type and protocol for connection): No Idea
    Has it ever worked? If so, what's changed? (provide comments in description field): No
    Same results with different file?: Yes
    Same results with different computer?: Not Applicable
    Recent System Hardware or Software change?: No
    Anyone know what is causing this and (more importantly) how to resolve it?
    Thanks!
    djb

    Don,
    I recommend that you look at
    http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Reset_the_Organizers
    You may need to scroll down to the choice for
    b Reset the Organizer's online-services state
    if the link does not directly take you to that specific entry
    Because you reported that you had a failure in a previous online service attempt I think it is very probable that you need to reset the online services.
    FYI - Uninstalling and reinstalling does not reset these user related parameters

  • Adobe Premier 10 - Online Services encountered an error.

    HELP
    For about 4 or 5 days I have been able to Share to Facebook my little videos Via the Online Facebook built into Premier 10.
    After some permission problems things started working and I was able to post a couple of video that I made
    directly out of premier over a period of several days.
    Today when I tried to post an error was returned "Online Services encountered an error. . . . . "
    I had not even re-booted my system nothing had changed.  I have tried to post a video that I had
    already posted, same error.  Went to facebook and removed permissions for Adobe to access my
    account, thinking that maybe this would cause a re-set of some kind, but alas no, same error.
    If I try to post to you tube the program gets to a user name password screen, but I don't have an account there.
    Shut down by firewall, but same error.
    Anyone have any ideas.
    Is there a format that I can produce and then manualy upload that would work as well?
    Dave

    With nothing changed at your end it is most likely a problem at Facebooks end. Try again later and see if it works again.
    To manually upload follow the suggestions in the FAQ : How can I get the best quality on YouTube?
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Online Services encountered an error.  Error 6: SOAP fault

    We run APSE 3.2 and we get the following error when we try to share our photos online;
    Online Services encountered an error.
    The service will now be terminated or paused if possible.
    (Error 6: SOAP fault)
    Everything seemed to run ok for about a month and than bang SOAP Error 6
    We did not install any additional applications since we have installed APSE!!??
    We do not run application based firewall - we only have the statefull XP FW Enabled.
    Any help would be greatly appreciated.
    Best regards,
    Bob L.

    Bob:
    Try this:
    In Starter Edition, go to Preferences, and then click on Photoshop Services.
    Then, click on Reset Services
    Then click on OK to close the preferences panel.
    Then, quit and restart Starter Edition.
    It should work.
    Let us know how it goes.
    Bob

  • When Uploading a video, I am given a "Online services encountered an error. The Service will now be terminated or paused if possible." How do I fix this? Where did it come from?

    When Uploading a video, I am given a "Online services encountered an error. The Service will now be terminated or paused if possible." How do I fix this? Where did it come from?

    Provide the name of the program you are using so a Moderator may move this message to the correct program forum
    This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

  • Premiere Elements 8 - Online services encountered an error

    Running Premiere Elements 8 on Windows Vista 64 bit and everytime I try to export to YouTube I get an error:
    I'm connected to the Internet just fine over a high-speed connection, I have a YouTube account and have uploaded many other videos before, but this is the first time I've tried it with Premeire Elements. I've tried restarting both Premiere and my entire computer, but still get this error. Here are the setting that I am using to export to YouTube ... default settings in Premiere Elements 8.
    Any thoughts?

    Have you gone to Edit/Preferences and refreshed the online settings?
    If that doesn't work, it could be YouTube has once again change its settings on us.
    Here's the workaround, if that's the case.
    http://forums.adobe.com/thread/390608?tstart=0

  • Error message says online services encountered an error. service will be terminated when i try and upload.

    cant upload videos anymore as I get the error message stated in the title. im trying to upload to youtube and never use to have problems. please help . thanks in advance. H

    H
    Please describe the export settings for the file saved to the hard drive and which is subsequently uploading to YouTube at the YouTube web site.
    Be advised that the Youtube feature within Premiere Elements has limit of 2 GB file size/15 minute duration. Your actual file size and duration
    may be exceeding those limits.
    Even if you have an extended time account at YouTube, it cannot be used within the Premiere Elements built in feature.
    And, if you go to YouTube with a file for upload there, you will need to apply for an extended account before being allowed to upload
    more than 2 GB/15 minutes. All that is my current understanding of that situation. Check YouTube for details.
    As a test, you could cut the file down to 10 minutes and see if you then can upload that file to YouTube at the YouTube web site.
    The other part of the matter is what are your export settings to generate this file?
    If you are not already...please select
    Publish+Share
    Computer
    AVCHD
    with an appropriate MP4 preset choice - H.264 1920 x 1080p30 or YouTube Widescreen HD.
    Then upload that to YouTube at the YouTube web site.
    Also try the 10 minutes cut down Timeline in an upload to YouTube from within the Premiere Elements YouTube feature.
    We will be watching for your results.
    Thank you.
    ATR

  • When I am about to share on youtube i get a message sayin "ONLINE SERVICES ENCOUNTERED AN ERROR"

    How do i fix this problem ???

    Hi,
    Did you tried resetting the preferences ? refer the link http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actio ns.html#restore_default_preferences
    -Harshit yadav

  • Online Services Encounters and Error

    Hello,
    I'm running PE 12 and have successfully uploaded multiple videos to Vimeo this month, but the past two days I receive an error message "online services encountered and error. the service will now be terminated or paused if possible".
    Is there an update or something I'm missing?
    Thank you!
    Kelly

    Kelly,
    When you use Publish+Share/Social Websites/Vimeo, you bypass the steps of having to save your Timeline to a file and then upload that file to Vimeo at the Vimeo web site and your Vimeo account. Instead, the Timeline content is processed and uploaded to Vimeo from the program, using your Vimeo account.
    With these longer times, check out the computer settings to assure that the computer does not go to sleep.
    At this point, I can only speculate why the longer upload times
    a. Vimeo problems - traffic or otherwise
    b. Any chance that latest upload has some differences than earlier ones, effects applied such as Video Stablilizer
    c. Generalized Internet Connection Problem
    d. Any multitasking
    e. Any pile up of Premiere Elements preview files, conformed audio, conformed video that might impact performance of Premiere Elements and computer
    Do you still have any of the project.prels whose Timeline uploads were characterized by shorter upload times to Vimeo from Publish+Share/Social Websites/Vimeo. You could try the upload again for one of these projects.
    If you exported this current Timeline to file and uploaded it at the Vimeo web site, is the expected upload time still 5 hours?
    Please review the above and then we can decide what next.
    Thanks.
    ATR

  • BO 4.0 Advanced Analysis for OLAP - The MDAS service encountered an error.

    Hi guru's,
    We are running BO 4.0 SP02 Patch 11 with SAP BW 7 and experiencing the following error with Advanced Analysis for OLAP:
    "Analysis edition for OLAP
    The MDAS service encountered an error."
    After you click show details:
    "com.crystaldecisions.thirdparty.org.omg.CORBA.MARSHAL  minor code: 0x0  completed: No"
    I have researched into this and found forums such as:
    http://forums.sdn.sap.com/thread.jspa?threadID=2053481
    SAP KB 1560100 - BI4.0 Advanced Analysis Web problem: The MDAS Service encountered an error
    SAP KB 1661163 - An error is generated when selecting a query or cube in Analysis for OLAP: Error 15
    However, none of these have helped our situation too much.
    We have rebuilt the windows server 2008 R2 recently, hence the process we followed was a fresh install of BO 4.0 SP02 platform & tools, and then patch 11 on top of these.
    Crystal, WEBI's (using the same BICS connections as the AA's) and Dashboards are all working as per expected.
    The errors are for every AA including ones with only 2 variable selections (light queries) to ones with many more. Hence it is platform wide for Advanced Analysis.
    I have also tried creating new AA using existing BICS, new BICS existing AA, new BICS new AA all with no luck.
    We have also created new Adaptive Processing Servers with only the MDAS as a common service, turned on tracing etc but nothing springs to us as to what is going wrong.
    Any ideas would be greatly appreciated?
    Thanks all,

    Hi All,
    After conversing with SAP support technicians we have found what is causing this issue.
    On the windows servers we have the following installed locally:
    - BO platform 4.0 SP02
    - BO platform 4.0 SP02 patch 11
    - BO client tools 4.0 SP02
    - BO client tools 4.0 SP02 patch 11
    - Crystal reports 2011 SP02
    - Crystal reports 2011 SP02 patch 11
    - Crystal reports for Ent SP02
    - Crystal reports for Ent SP02 patch 11
    It seems that the crystal reports 2011 or cr for Ent was causing an issue in the .WAR files that BOE uses to run Advanced Analysis for OLAP.
    After uninstalling the two crystal products and removing any left over cr files in program files on the server, AA for OLAP works successfully in our environment.
    The other point after this was i stopped the tomcat and SIA, i renamed the BOE folder under <install dir>\SAP BO4.0\Tomcat6\webapps and restarted the tomcat and then the SIA. In 4.0 when the tomcat is started again it will go and recreate the BOE folder from the BO directories effectively recreating the apps .WAR files under the webapps\BOE folder.
    SAP will hopefully document this issue for other clients.
    Cheers,

  • Get-mailboxdatabasecopystatus -identity DBNAME | fl gives errors "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for". DB is mounted and the DB copies are in healthy status.

    We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
    When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
    When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
    recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
    ErrorEventID : 4126
    In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
    Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
    is 1 and the SCOM alert is still active.
    The version is Exchange 2010 SP3 UR5
    Any clues???

    Hi,
    From your description, this issue only affect one mailbox datatabase.
    Please use the Update-MailboxDatabaseCopy command to check result.
    If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • The MDAS service encountered an error.

    Hi Experts,
    I have a BEx Query. On this I have created an Analysis Work Space in BO. I have one system for both (Dev & QA) in BO.
    The Analysis Work Space query is executing without error in BO Dev, but it is throwing below error for QA query:
    The MDAS service encountered an error.
    Failed to execute getRepresentation() because the query state [USER_NOT_AUTHORIZED] is invalid. : com.businessobjects.multidimensional.services.MdasRuntimeException: Failed to execute getRepresentation() because the query state [USER_NOT_AUTHORIZED] is invalid.
    I have gone through so many SDN topics related to this. But couldn't get much info on this.
    Note: The query doesn't have any calculation.
    Please suggest.
    Best Regards,
    Niranjan

    Hi Niranjan,
    BW is throwing this error most probably, you might need to check bw side.
    This might help you Warning eye(007) - Authorization error in webi report

  • On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Can you advise steps I might take now?  On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

    Hi Ringdoc,
    Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
    Let us know how it goes!
    Best,
    Sara

  • The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

    Last night, some of our systems installed updates released on 11/13/2014.  
    KB3021674
    KB2901983
    KB3023266
    KB3014029
    KB3022777
    KB3020388
    KB890830
    Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
    Log Name:      Security
    Source:        Microsoft-Windows-Eventlog
    Date:          1/15/2015 11:12:39 AM
    Event ID:      1108
    Task Category: Event processing
    Level:         Error
    Keywords:      Audit Success
    User:          N/A
    Description:
    The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
    Servers running Windows Server 2008 that also installed the updates are not experiencing the problem.  It looks like one of the updates may have introduced this problem with Server 2008 R2.

    ...Did you for sure confirm that:
    https://technet.microsoft.com/library/security/MS15-001
    is the cause?
    I did.  I had a VM that was not experiencing the problem.  I took a snapshot and tested the patches one by one.  Installing only KB3023266 immediately caused the issue to occur (after reboot).  A similar process was used to confirm that
    installing KB2675611 resolved the problem.
    Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems.  We had installed this patch a few months ago on a couple of servers and it was always quick to install.  But,
    it seems like installing it on a symptomatic system can cause it to take a long time.

Maybe you are looking for

  • I am unable to enter data in a Google sheet via iPad.

    I am unable to enter data in a Google sheet on my iPad. The admin on the sheet says it's open to anyone with the link. I can enter from my iMac but not from my iPad (current ios.) What am I doing wrong?

  • How to access SAMLIdentityAsserter (V2)

    Hi I would like to access a specific SAMLIdentityAsserter from within my ServletFilter. I want to read special attributes from this SAMLIdentityAsserter to build up my own SAML request. Does anyone knows how I can access this Module, I know I should

  • Does the iPhone 5 'light leak' affect function?

    I just recently received my white iPhone 5, and I have a small light leak near the power button along the bezel. Does this affect the function of the phone, such as the screen brightness? And Would Verizon replace it?

  • Populating deliv.add on po line item through inbound idoc

    I could not populate delivery address on to po line item in backgroun i.e., through inbound idoc. please help , its a bit urgent.

  • Labview.ex​e generated error

    "I am using LabVIEW 6.1 in windows 2000. I downloaded the Agilent3499A IVI from the website and configured the driver and everything. When I run the Initialize.vi, I have this following problem. LabVIEW.exe has generated errors and will be closed by