Online vs Read Write

I have a confusion in following commands about tablespace.
When should we use Online and Read Write.
SQL> ALTER TABLESPACE imp_dat ONLINE ;
SQL> ALTER TABLESPACE imp_dat READ WRITE ;
If ONLINE tablespace allow READ/WRITE both, then why is Read Write for?
Need more clarifications plz.

do you want to know the difference between ONLINE/OFFLINE and READ ONLY/WIRTE.
if the tablespace is READ ONLY it is available to select the data from.
if the tablespace is OFFLINE then you can not even select from it.
hope this is the answer of you question.

Similar Messages

Online read + write from/to ms sql server database

hi all,
we're using R 4.6C. Want to connect to MS Sql server database and read/write data from abap program.
what's the best (and fastest) way do to this ?
joerg

I know only DBCON (Database multiconnect): see the notes 178949 and 323151 for more details.
Message was edited by: max bianchi

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I need to restore it, but old version is locked....

Is it possible to change the read/write permissions on a time machine back-up of iTunes? I'm needing to restore it as my phone deleted half our playlists during sync & am not seeing a way to unlock the permissions. I have the current version unlocked, but can't seem to get the backed-up version. When I click on restore I get a pop-up that says iTunes can't be deleted as it is part of the OS. I'm not even trying to delete, just restore the old version. Any suggestions?

Hmmm, ok I'll give it a shot. I've always had the iTunes sync w/ my phone set up to only load selected playlists to the phone b/c there's a lot more in iTunes than I have room or desire for on my phone. A few months back I started having trouble w/ trying to sync everything & subsequently adding more to the phone than it could hold. The quickest thing at the time was to unclick the sync music option in iTunes so I could still backup the phone to the computer & not have a problem.
When I asked about it during one-to-one session shortly after, they advised me to delete the music off my phone & then re-sync it to the computer, run a backup of the phone & redownload the music to the phone. When I tried this it ended up deleting all my playlists (but not my husband's) from iTunes. Irritating, but I've been rebuilding the playlists since. I had also unclicked sync music again & an Apple person told me the most likely best fix was to delete & reload iTunes completely.
A few days ago I realized I hadn't backed up the phone to the computer in over a month so after deleting & reinstalling iTunes, & w/o changing anything (sync music was STILL unchecked) I ran a backup & my phone went from having 4 GB free space to being 2 GB over capacity due to iTunes trying to download the entire music library to the phone. I made a one-to-one appt again & it was suggested AGAIN that I delete all the music off my phone & then resync it to the computer & redownload the music. We did this (though a few random songs that had previously been purchased somehow remained on the phone), I got home, connected the phone & instead of the music that shows as 'on my device' disappearing from iTunes it just sat there, so, as the guy had told me I MIGHT have to do, I threw all those songs showing in iTunes as being on my phone, in the trash so that it was completely clear.
At this point I checked sync music, made sure the options were 'selected playlists only', checked the ones from my own list that I wanted (I usually have one playlist of comedians from my husband's folder that I also have on the phone, but didn't check it at this point). It uploaded all my stuff just fine, but for whatever reason when it saw that I wasn't uploading that comedy playlist any longer, it not only didn't upload it but proceeded to delete my husband's entire folder of playlists from iTunes. -_- I got on the phone w/ an Apple support person right away but he wasn't able to tell me anything .. basically said we'll have to rebuild everything. I asked about the possibility of using time machine, he said he's not qualified to answer that, so that's when I started looking around online & found, among others, the link I referenced a couple replies ago.
I hope this all makes sense. It's been a long-term issue so I'm trying to go from memory as I figured to begin w/ that I had just made a mistake somewhere, so didn't try to document anything. Now w/ it having happened a 2nd time, I'm not sure if it was 'user error' or something else.......

Encoding on terminal to read/write ntfs hard drive help!

I encoded in Terminal the codes that were posted online regarding the enabling of read/write for ntfs hard drive but something went wrong during the process. Would it be possible to undo it? Would there be any code to disable it so I could at least read it? It won't even read my hard drive anymore. I think I have accidentally delete the Volumes part where it was supposed to appear.

Difficult to say without knowing what you did more precisely. Use the terminal history command as follows:
     history > ~/Desktop/MyNightmare.txt
to save what you got up to in a file on your desktop. Copy and paste the lines that will show us what you did. Check for, and redact as necessary, any personal information such as user names, passwords, etc. before posting.
Also, I assume that you tried to edit your /etc/fstab file so please post the results of these terminal commands
     ls -la /etc/fstab
     cat /etc/fstab
too.
C.

Open standby read-write then flashback leaves standby in new incarnation?

Oracle 10.2.0.4 on RHEL. In February, we followed Note:805438.1 to open the standby for read-write for a test (after creating a restore point). A few minutes later, we did flashback. It ran fine ever since, receiving and applying archivelogs. Recently we noticed it stopped applying redo and this started in late June. Then I followed Note:836986.1 to roll forward the standby with incremental backup from the primary. During this process, it was found that the standby was in incarnation 2:
RMAN> list incarnation;
using target database control file instead of recovery catalog
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ORACP2 4102395133 PARENT 1 20080407 14:13:17
2 2 ORACP2 4102395133 CURRENT 44328058841 20110223 08:33:18
The solution is to set it to 1, because the primary is (and always was) 1:
reset database to incarnation 1;
The DBA team don't recall making any significant change to the standby since the February test and alert.log doesn't show anything relevant. Will "open standby read-write then flashback" leave the standby in the new incarnation, instead of setting it back to the original incarnation? We checked another database which has a standby we did the same test on. The standby is back to the original incarnation as the primary is. So there must be something special about this database.
Secondly, if the standby stayed in a newer incarnation, how could it continue to apply redo received from the primary in its original incarnation?

Thanks. Bug 6035495 is related but not exactly my case. My 10.2.0.4 standby database alert.log does not have "orphan" or "ORA-19909". But the solution is the same.
The Oracle support analyst working on my case referred me to this new note
Rman-06571: Datafile 1 Does Not Have Recoverable Copy (Doc ID 1336872.1)
(maybe he wrote it)
That's exactly what happened to me. Although flashing back the standby sets its current incarnation back (to the same as the primary), if you later run "catalog start with" on the standby, that command will change the incarnation to the later one! Since I was following Note:836986.1 to roll forward the standby, "catalog start with" was run and these lines appeared
WARNING: catalog online log file +fra/ORACP2SB/ONLINELOG/group_52.2882.708107363 is not supported
New incarnation branch detected in Backup, filename +FRA/oracp2sb/autobackup/2011_02_23/s_743848464.8985.743848467
Inspection of file changed rdi from 1 to 2
Setting recovery target incarnation to 2
Wed Jul 6 00:06:53 2011
Setting recovery target incarnation to 2
Wed Jul 6 00:10:51 2011
It appears that when "catalog" detects another (must be newer I guess?) incarnation, it blindly sets the standby database to that one. The analyst calls it "implicit catalog". It may as well be called "implicit incarnation change of catalog" or "side effec of catalog".
Edited by: user11989003 on Jul 11, 2011 7:02 AM
Edited by: user11989003 on Jul 11, 2011 7:04 AM

ThinkPad External DVD Reader / Writer USB 2.0??

Hi, one of the largest online selling and buying website in New Zealand, trademe, has listed via a buyer a ThinkPad External DVD Reader / Writer USB 2.0. One of my friend bought it and found that it is shown on the computer hard drve as a Philips DVD RAM SDVD 8821 HUSB. The buyer claimed that it is a genuine product bought from IBM shop. I am asking if there is a possibility for that to happen? If it is a fake product of IBM, is my friend liable to buying fake stuff. I think she was duped to think it is a genuine product. I asked this question via the IBM Australia. The respondent told me the model number was "Part Number - 43N3264". I had a search on google and the part number of the leveno external drive is not similar to the one I bought from the online shop. Mine one has got the logo of "thinkpad" on the bottom right hand corner. Whereas the external drive with the part number 43N3264 had the logo of leveno on the bottom left hand side. That's why I need to ask you in this inquiry. Intuitively, I don't think "thinkpad" has manufactured external drive. It has only been used as laptop models. Thanks for your attention.

there are several fake ones on the market, some are well made while others are not.
AFAIK the genuine one don't have a thinkpad logo, but rather a Lenovo logo.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

When I start Firefox, my computer slows to a crawl; the problem is that between every operation, the disk reads/writes for about a minute.

I have an old (~6 yrs) HP laptop running Win XP. I've scanned for viruses, deleted temp files, etc, and defraged the hard drive. After doing a fresh boot, all works OK until I start Firefox (3.6.6), and then every mouse click sends the hard drive into read/write mode for up to a minute. Just writing this memo has taken eight minutes; going to my bank site and setting up a transfer (about 12 mouse clicks) took 16 minutes (!).
Things other than Firefox continue to be plagued by the same problems, after starting and closing Firefox. Opening an Explorer window can take up to three minutes. Closing Firefox doesn't seem to solve the problem - I need to reboot to do that.
Any thoughts?

Start Firefox in Safe Mode (above). Wait a few minutes, then close Firefox.
Is there still a problem?
If you are still having issues;
Type '''about:support''' in the address bar and press '''Enter.'''
Under the main banner, press the button; '''Copy Text To Clipboard.'''.
Then in the reply box at the bottom of this page,
do a right click in the box and select '''Paste.'''
This will show us your system details.
'''No Personal Information Is Collected.'''
Start your '''Computer''' in safe mode with networking. Then start Firefox.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''

How do you create default Read/Write Permissions for more than 1 user?

My wife and I share an iMac, but use separate User accounts for separate mail accounts, etc.
However, we have a business where we both need to have access to the same files and both have Read/Write permissions on when one of us creates a new file/folder.
By default new files and folders grant Read/Write to the creator of the new file/folder, and read-only to the Group "Staff" in our own accounts or "Wheel" in the /Users/Public/ folder, and read-only to Everyone.
We are both administrators on the machine, and I know we can manually override the settings for a particular file/folder by changing the permissions, but I would like to set things up so that the Read/Write persmissions are assigned for both of us in the folder for that holds our business files.
It is only the 2 of us on the machine, we trust each other and need to have complete access to these many files that we share. I have archiveing programs running so I can get back old versions if we need that, so I'm not worried about us overwriting the file with bad info. I'm more concerned with us having duplicates that are not up to date in our respective user accounts.
Here is what I have tried so far:
1. I tried to just set the persmissions of the containing folder with us both having read/write persmissions, and applied that to all containing elements.
RESULT -> This did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
2. I tried using Sandbox ( http://www.mikey-san.net/sandbox/ ) to set the inheritance of the folder using the methods laid out at http://forums.macosxhints.com/showthread.php?t=93742
RESULT -> Still this did nothing for newly created files or folders, they still had the default permissions of Read/Write for the creating User, Read for the default Group, Read for Everyone
3. I have set the umask to 002 ( http://support.apple.com/kb/HT2202 ) so that new files and folders have a default permission that gives the default group Read/Write permissions. This unfortunately changes the default for the entire computer, not just a give folder.
I then had to add wife's user account to the "Staff" group because for some reason her account was not included in that. I think this is due to the fact that her account was ported into the computer when we upgraded, where as mine was created new. I read something about that somewhere, but don't recall where now. I discovered what groups we were each in by using the Terminal and typing in "groups username" where username was the user I was checking on.
I added my wife to the "Staff" group, and both of us to the "Wheel" group using the procedures I found at
http://discussions.apple.com/thread.jspa?messageID=8765421&#8765421
RESULT -> I could create a new file using TextEdit and save it anywhere in my account and it would have the permissions: My Username - Read/Write, "Staff" or "Wheel" (depending on where I saved it) - Read/Write, Everyone - Read Only, as expected from the default umask.
I could then switch over to my wife's account, open the file, edited it, and save it, but then the permissions changed to: Her Username - Read/Write, (unknown) - Read/Write, Everyone - Read Only.
And when I switch back to my account, now I can open the file, but I can't save it with my edits.
I'm at my wits end with this, and I can believe it is impossible to create a common folder that we can both put files in to have Read/Write permissions on like a True Shared Folder. Anyone who has used windows knows what you can do with the Shared folder in that operating system, ie. Anyone with access can do anything with those files.
So if anyone can provide me some insight on how to accomplish what I really want to do here and help me get my system back to remove the things it seems like I have screwed up, I greatly appreciate it.
I tried to give as detailed a description of the problem and what I have done as possible, without being to long winded, but if you need to know anything else to help me, please ask, I certainly won't be offended!
Thanks In Advance!
Steve

Thanks again, V.K., for your assistance and especially for the very prompt responses.
I was unaware that I could create a volume on the HD non-destructively using disk utility. This may then turn out to be the better solution after all, but I will have to free up space on this HD and try that.
Also, I was obviously unaware of the special treatment of file creation by TextEdit. I have been using this to test my various settings, and so the inheritance of ACLs has probably been working properly, I just have been testing it incorrectly. URGH!
I created a file from Word in my wife's account, and it properly inherited the permissions of the company folder: barara - Custom, steve - Custom, barara - Read/Write, admin - Read Only, Everyone - Read Only
I tried doing the chmod commands on $TMPDIR for both of us from each of our accounts, but I still have the same behavior for TextEdit files though.
I changed the group on your shared folder to admin from wheel as you instructed with chgrp. I had already changed the umask to 002, and I just changed it back to 022 because it didn't seem to help. But now I know my testing was faulty. I will leave it this way though because I don't think it will be necessary to have it set to 002.
I do apparently still have a problem though, probably as a result of all the things I have tried to get this work while I was testing incorrectly with TextEdit.
I have just discovered that the "unknown user" only appears when I create the a file from my wife's account. It happens with any file or folder I create in her account, and it exists for very old files and folders that were migrated from the old computer. i.e. new and old files and foders have permissions: barara - Read/Write, unknown user - Read Only, Everyone - Read Only
Apparently the unknown user gets the default permissions of a group, as the umask is currently set to 022 and unknown user now gets Read Only permissions on new items, but when I had umask set to 002, the unknown user got Read/Write permissions on new items.
I realize this is now taking this thread in a different direction, but perhaps you know what might be the cause of this and how to correct or at least know where to point me to get the answer.
Also, do you happen to know how to remove users from groups? I added myself and my wife to the Wheel group because that kept showing up as the default group for folders in /Users/Shared
Thanks for your help on this, I just don't know how else one can learn these little "gotchas" without assistance from people like you!
Steve

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

System Folder errors after I changed all permissions on HD to read & write

Hi,
Two things may have caused probs on my new 2010 iMac (Snow Leopard), and Applecare is shut so I would really appreciate some help as I have urgent work.
1) INCORRECT PERMISSIONS
I have been stupid. I clicked on Macintosh HD and changed all permissions to read & write because I wanted to be sure I could open and edit all documents on other computers.
I ran Disk Utility Repair Permissions from the install disc, but I am still getting system error messages, and my HP printer won't work.
The first message, in Repair Permissions, said: Warning: SUID file System/Library/Cores has been modified and will not be repaired. I have read a support doc on this which says no need to worry but I don't like it and would like to fix this.
More importantly, my HP printer won't work, displays error beside the document in print dialogue box.
Deleting the printer and readding it didn't work, so I downloaded new drivers and tried to install them, which is when I got the second system error message: System extension System/Library/Extensions/BJUSBLoad.kext was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for an update.
I checked the permissions on the file and they were still wrong despite Repair Permissions, allowing everyone to read & write. So I have now clicked on the entire System folder and changed the permissions to: System read & write, admin read only, everyone read only.
Will this fix it or do I need to do something else, such as check ownership, to make sure all permissions on the computer are now correct?
2) MEMORY STICK SHUT DOWN MY IMAC
Additionally (though I don't think this had anything to do with my problems), I inserted a Sandisk USB memory stick the other day and it immediately shut down the computer. When I inserted it into my Macbook it initially rejected it and gave me a message saying the device wanted too much power so it had ejected it to prevent damage to my computer. When I tried again it was OK. I totally reformatted the stick in case there was something harmful on it, but should I now bin the stick as faulty? Scared to use it again.
3) IS IT BEST TO REINSTALL ENTIRE SOFTWARE?
If I do a reinstall of all the software from the install disc, will it wipe out all my data, such as Mail, documents, bookmarks and other apps?
I would back-up, but if I try and back up files on my external drive it will automatically do a Time Machine back-up and I don't want to do that in case it backs-up all the corrupted files. Otherwise, I wouldn't mind starting again just to be sure all is well.
Expert advice would be very much appreciated.
Thank you
Sarah

Oh, silly really. I was in a hurry and working on docs that I needed to take to the office and open on another computer there.
But when I checked the permissions on the doc it said I could read & write but everyone else was read only.
I thought if I opened it on another machine I'd be stuck with read only access and not be able to work on there. I think I couldn't change it, so I thought to avoid any future problems like that I would change everything on machine!
Yikes. Won't do that again
Sarah

Windows Server 2012 - Hyper-V - iSCSI SAN - All Hyper-V Guests stops responding and extensive disk read/write

We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM, 2 teamed NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM, 1 NIC dedicated to Virtual Machines and Management, 2 teamed NIC dedicated to iSCSI storage. - This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched of.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, WMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with 2 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair
Our Problem
Our problem is that for some reason all of the VMs stops responding or responds very slowly and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
Symptoms (i.e. this happens, or does not happen, at the same time)
I we look at resource monitor on the host then we see that there is often an extensive read from a VHDX of one of the VMs (40-60 Mbyte/s) and a combined write speed to many files in \HarddiskVolume5\System Volume Information\{<someguid and no file extension>}.
See iamge below.
The combined network speed to the iSCSI SAN is about 500-600 Mbit/s.
When this happens it is usually during and after a VSS ShadowCopy backup, but has also happens during hours where no backup should be running (i.e. during daytime when the backup has finished hours ago according to the log files). There is however
not that extensive writes to the backup file that is created on an external hard drive and this does not seem to happen during all backups (we have manually checked a few times, but it is hard to say since this error does not seem leave any traces in event
viewer).
We cannot find any indication that the VMs themself detect any problem and we see no increase of errors (for example storage related errors) in the eventlog inside the VMs.
The QNAP uses about 50% processing Power on all cores.
We see no dropped packets on the switch.
(I have split the image to save horizontal space).
Unable to recreate the problem / find definitive trigger
We have not succeeded in recreating the problem manually by, for instance, running chkdsk or defrag in VM and Hosts, copy and remove large files to VMs, running CPU and Disk intensive operations inside a VM (for instance scan and repair a database file).
Questions
Why does all VMs stop responding and why is there such intensive Read/Writes to the iSCSI SAN?
Could it be anything in our setup that cannot handle all the read/write requests? For instance the iSCSI SAN, the hosts, etc?
What can we do about this? Should we use MultiPath IO instead of NIC teaming to the SAN, limit bandwith to the SAN, etc?

Hi,
> All VMs are using dynamic disks (as recommended by Microsoft).
If this is a testing environment, it’s okay, but if this a production environment, it’s not recommended. Fixed VHDs are recommended for production instead of dynamically expanding or differencing VHDs.
Hyper-V: Dynamic virtual hard disks are not recommended for virtual machines that run server workloads in a production environment
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx
> This is the primary host and normaly all VMs run on this host.
According to your posting, we know that you have Cluster Shared Volumes in the Hyper-V cluster, but why not distribute your VMs into two Hyper-V hosts.
Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster
http://technet.microsoft.com/en-us/library/jj612868.aspx
> 2 teamed NIC dedicated to iSCSI storage.
Use Microsoft MultiPath IO (MPIO) to manage multiple paths to iSCSI storage. Microsoft does not support teaming on network adapters that are used to connect to iSCSI-based storage devices. (At least it’s not supported until Windows Server 2008 R2. Although
Windows Server 2012 has built-in network teaming feature, I don’t article which declare that Windows Server 2012 network teaming support iSCSI connection)
Understanding Requirements for Failover Clusters
http://technet.microsoft.com/en-us/library/cc771404.aspx
> I have seen using MPIO suggests using different subnets, is this a requirement for using MPIO
> or is this just a way to make sure that you do not run out of IP adressess?
What I found is: if it is possible, isolate the iSCSI and data networks that reside on the same switch infrastructure through the use of VLANs and separate subnets. Redundant network paths from the server to the storage system via MPIO will maximize availability
and performance. Of course you can set these two NICs in separate subnets, but I don’t think it is necessary.
> Why should it be better to not have dedicated wireing for iSCSI and Management?
It is recommended that the iSCSI SAN network be separated (logically or physically) from the data network workloads. This ‘best practice’ network configuration optimizes performance and reliability.
Check that and modify cluster configuration, monitor it and give us feedback for further troubleshooting.
For more information please refer to following MS articles:
Volume Shadow Copy Service
http://technet.microsoft.com/en-us/library/ee923636(WS.10).aspx
Support for Multipath I/O (MPIO)
http://technet.microsoft.com/en-us/library/cc770294.aspx
Deployments and Tests in an iSCSI SAN
http://technet.microsoft.com/en-US/library/bb649502(v=SQL.90).aspx
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

When I open the browser, it says as an alert regarding the profile directory and says that read/write should be changed and it doesn't work then.i uninstalled and re-installed firefox6.0.2.how can i overcome this problem

could not initialize the application's security component .the most likely cause is problems with files in your application's probile directory.please check that this directory had no read/write restrictionsand ur hard disk is not full or close to full .It is recommended that you exit the application and fix the problem.if you continue to use this session ,you mightsee incorrect application behaviour when accessing security features....THIS IS THE ALERT I GET WHENEVER I TRY TO OPEN FIREFOX.

See:
*https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

How can I make sure files I transfer stay at read/write instead of read?

My employer recently got six brand new Mac Pros for our a/v guys. Well I wasn't able to get migrate to work (it wouldn't detect the slave drives, only the master) so I had to put files onto an external drive (a LACIE 1TB) and put them on the new Mac Pro OS 10.5.
We're finding out that files that we're moving, their permissions are being changed to read only instead of remaining at read/write or so it seems.
We've also got these machines on a closed network so we can share files between different areas of the office. Each computer has an administrator account and allows sharing and gives those it is sharing with, read/write permissions. But if I transfer a file from machine a to machine b, it comes out as read only one the file.
I'm thinking we jacked up the file sharing somewhere somehow. Curious if anyone might be able to take a crack at this. We're all new to leopard.
Screenshots:
Thanks

usually though; they are techs; and so geeky; that in windows they set themselves as admins with unlimited privaleges. So what they do is go to account setting and just delete your account; and when they delete; they will delete everything; and all your person files.
Most though; find that too troublesome; so they just reformat the drive with a backup they built; for that computer.
Most of the things you can do is deleting temporary internet files; and cookies; and any saved passwords on your account. Usually all found in options/tools in most web browsers. For windows; most files are on desktop; my music; my downloads; my documents; and etc.

How to read, write and save a file?

Hello everybody,
I have a question about reading , writing and save something into a file (etc text file)
For example: I want to create a file of football in which there are many key words as: "football", "touch down", "quarterback", "ball", "linebacker", "coach", "player"...
Now i want to open to read, write one more word "head" ( synonym with "coach") and store it for using next time. How could i do that?
Could anybody help me about that?
Thank you very much in advance.
still_learn

take a look in the API about FileInputStream and FileOutputStream

SharePoint read/write list item to another DB/file

Hi All,
I am working on MOSS 2007. I have the following requirement.
There are around 50 document librararies on a site collection. I need to store all the items from these libraries in a locally (it could be DB/CSV or excel or access) and read/write them periodically for some calculations/comparisions.
Note: 1) the VM that I am working doesnt have MS Office installed to try for Access or Excel.
2) Is there a way to use access without needing to install MS Office.
Please let me know the best approach for the above task.
Any help is greatly appreciated.
Regards.

Hi All,
Can any one help me with this..?
Thanks.

Online vs Read Write

Similar Messages

Maybe you are looking for