Online Web Access - Login Credentials and Push to Hub??

Ok, so, my company will not be supporting BlackBerry 10. It's a long story and don't want to go there. It's just not going to happen. So, if I get a new Q10 (want one badly) I am only left with online web access to my company e-mail. Couple questions:
1) Will BB10 remember my username and password? I plan to save a link to my app screen that takes me directly to my company's webmail (Lotus Notes), but I don't want to have to type my username and password every time. If it can't do this, are there any apps that can?
2) Is there any way to push my OWA to the HUB or the red notification LED, so I know when I have new e-mail? Any apps that do this?
3) What would be the best way to sync my work calendar (Lotus Notes) to my device?
I hope I can accomplish these things, all while still following the rules of my IT department (very important to me!). I really hope this is possible so that I can get a Q10.
TYIA,

Hello,
Your post is a little conflicting...you state you have Lotus Notes and then you also state you have OWA. OWA is a MicroSoft Exchange provided function, not a Lotus one. So I am a bit confused by your description.
In any event, if indeed OWA exists, you can integrate that if you can convince your IT folks to simply activate ActiveSync. I have read that it's a simple thing to do, but not being an admin, I can't say anything more than that.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Using remote desktop web access (RDWEB) with remoteapps and a traditional remote desktop

I configured windows 2012 r2 remote desktop services and remote desktop web access (rdweb) and was able to click the icon on the rdweb page to log on to a remote desktop session. When I published a remoteapp program, the remote desktop icon went away. How
do I get it back? Do I need to publish remote desktop as a remoteapp so users can both use remote apps and log on to a traditional remote desktop session?
thanks in advance for the help

Hi,
You can just publish RDC as RemoteApp and then can connect to the desired remote desktop connection. You can check the below snap.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Outlook Web Access, BB Bold 9000 and deleting emails

Good afternoon:
I have a BB 9000 which is my first BB. My work uses Outlook Web Access hosted on IP provider's site via their Microsoft Exchange Server.
I have successfully connected the BB to Outlook Web Access , so I get emails and can read and reply. However, I have two problems and hope someone has a solution. I have tried elsewhere with no luck.
1. I delete emails on the BB, but even though I have selected to delete both on the "mailbox and handheld," it never does. I still have the same long list of emails waiting for me when I get to the office.
2. When I send an email from the BB, it will NOT attach a signature, even though I have one set up at Outlook Web Access and on the BB itself. It won't even say "sent from my BB."
Has anyone solved these problems already? I appreciate your advice. Thanks.

Hi there, try doing the following.
Go into your Settings folder and select Email Settings. Log in to your BIS account if required, then select your work email account. Ensure that you have your signature entered there. If it's blank, that's why you're emails are not including your signature. You will need to fill that in. Then click on the setting for Synchronization Options and ensure that the option for Deleted Items is checked. Once that's done, save the settings, and exit out. Everything should then be working correctly.
If that doesn't help or you are not certain about a step, let us know exactly where you're having troubles, but I have a feeling that should resolve things for you.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

I am using Microsoft OUtlook Web Access for work email and I am losing functionality. What do I do?

I use Microsoft Outlook Web Access for work emails when not at the office4 and I cannot/do not have any options to enlarge text or change fonts, etc. What do I need to do to make it work as if IE were my default browser?
Thanks.

Outlook Web App (new name) on Exchange Server 2010 should be quite full featured. The Outlook Web Access supplied with Exchange 2003 didn't offer a very good experience for browsers other than IE...
Could you describe where the problem with fonts is: when composing messages, or when reading/working with the UI?

Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

TFS 2012 - WI Query in TFS Web Access - History field contents appear with html tags presented as text

When History field is selected as a column to be displayed in a WI query result, its contents are displayed with the HTML tags as if they where text, e.g. <p> contents </p>...
This occurs when query is run in web access contents in IE and when result is sent via email from within TFS (there's a button for this purpose).
However, in Visual Studio 2012 the same History Column contents are shown without the tags, as one would expect.
Furthermore, when one clicks on Open In Microsoft Office, for this query results in VS, and selects result in Excel, the History column in the Excel appears empty.
The only way we found to bypass this issue for now, it to mark all the query result lines in VS, and right click for "print selected list..." to a virtual PDF printer. This way the result looks reasonably ok when History field is included.
Kindly advise, Thank u very much.

Hi Moital,
Thanks for your post.
As far as I know history content will display with the HTML tags if there’s multiple lines in content, and History content not support show in Excel, that’s by design in TFS Server.
As Clementino said, you can submit this scenario in connect site, Microsoft engineers will evaluate them seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Firefox crashes when replying to Outlook Web Access 97

When trying to reply to a message in Outlook Web Access 97 , it crashes and will not restart. At times it works, but other times it doesn't and I have to go to Safari to use Outlook.
Any ideas?
Thanks,
Jeff

Please give me the crash report ID. Press '''CTRL+ L''' to Go to the address bar then type '''about:crashes'''.
Copy and paste the entire page here and I will be able to figure out your problem

Won't validate my password to outlook web access, but it work using a browser

I changed my office network password and my blackberry won't validate my new password a few days ago.
But I can go to my company outlook web access using a browser and the new password work.
It means a problem with a connector on my blackberry.

If you migrated your MobileMe account to iCloud before September last year then your @me.com address should still be functioning. If you sign into http://icloud.com can you see your mail there?
If you did migrate, and can get into Mail on the website, then you can set up Mail on Snow Leopard to access it. However when you try to set it up, the Mail 'Wizard' will attempt to force you to te MobileMe settings, because it's never heard of iCloud. To get round this you will need to follow the procedure outlined here:
Entering iCloud email settings manually in Snow Leopard or Leopard
If you did not migrate your account then you don't have an iCloud account and your @me.com address will no longer function.

Outlook Web Access will only log in as Light Version

My office has been using Microsoft Exchange Outlook Web Access for longer than a year at least. We have been using the full version. We have a desktop operating Windows 7 with the most updated IE browser, and my computer a Windows 8 laptop with the
most updated IE browser. My lap top is where the problem is. As of about two days ago the OWA is only logging in as the Light version. There is an option on the log in screen that says "Use Outlook Web Access Light" and the box is checked and grayed
out so that I can not uncheck it. I did not check this myself it just happened. Also the setting for blind and vision impaired users is not checked off in the accessibility tab under options. I have checked the Windows 7 desktop and it is functioning
normally. It allows the user to check or uncheck the "use outlook web access light" at will and does not get stuck in Light version. Also please note that this is the same email address for both computers not multiple users
where one works and one doesn't. I am charged to monitor the email in our office and do it from the laptop but there is access to it on the desktop if the other employee needs access. I have also seen forums where they say to
change the server to say OWAPremiumClientEnabled. I do not know how to do this. If this is a possible solution please give me steps on how to access the server which i don't even know if i am connected to.

What kind of help do you need?
If Outlook Web App opens just in a light version, you have to update your Exchange Server to resolve this issue.
Also you can temporarily add the URL/Domain to the Compatibility List as said Martina_Miskovic.

Hoe to redirect RD gatway to RD web access Server

Hi
i have already one W2008 server with All RD services but not RD gatway. i have just installed RD GW on W2012. i opend the 443 port on Firewall and i can connect from externl to it.
the question now : how to set the RD GW to rediret any request from client to the Web acces installed on the other server ?
Many thanks for Help

Hi,
Thank you for your comment.
RD Web Access server needs to communicate with your RDSH server to retrieve the list of RemoteApp program. RDWeb server computer account needs to be a member of the local RD Web Access Computer group on your RDSH server. The client PC also needs to trust the
certificates it receives from RDWeb, RD Gateway, RDSH, etc. In RemoteApp Manager on your RDSH server please configure the FQDN of your RD Gateway server.
You can check below link, which might get useful for your case.
Windows Server 2012: Manage your RDS with RDMS
http://technet.microsoft.com/en-us/magazine/dn235779.aspx
Configure the RD Web Access Server for RemoteApp and Desktop Connection
http://technet.microsoft.com/en-us/library/dd759250.aspx
Configuring RD web access for public/external access
http://social.technet.microsoft.com/Forums/windowsserver/en-US/4396d3e9-2ac5-4d0b-baba-25471498a349/configuring-rd-web-access-for-publicexternal-access?forum=winserverTS
Hope it helps!
Thanks,
Dharmesh

Accessing the online web-configuration page

I own a Linksys-G WRV200 wireless router, and I have tried to access the online configuration page and a page comes up that says
401 Bad Request
cannot use wireless interface to access web.
Now, I do not have the disk that came with the router but I do have the software for my router, downloaded from this website. I have done the process where you go into command prompt and type "ipconfig /release" then "ipconfig /renew", and it did not work, unless I have to restart my PC again after I did this process, which i have not.
Are there any other ways to open this web-configuration? The only reason I want to do this is so I can edit my NAT settings and Port Forward, is there any other way to do this without the online web-page?
Thanks in advance

To view the router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router (often, an attempt to connect wirelessly will fail).
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the Linksys router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

Hide system tray notification after login via RD web access

Hi,
I have a question. Is there a way to set that the notification in system tray won't appear after login into RD web access? And related question. I recently rename server and in this notification still shows old one. "Your computer is connect to: {old
server name}" Is there way to change to at least the correct name of the server? I tried searching in registry but without luck. Thank you.

Hi,
Thank you for posting in Windows Server Forum.
What’s your server OS Version? There is one KB related to the issue which you are facing.
The issue might occurs when there are multiple unexpired cookies on the client computer. To work around this issue you can use “Let me Fix by myself” from below article.
The "Connected" icon does not appear in the notification area when you connect to a remote application by using Remote Desktop Web Access on a computer that is running Windows Server 2008 R2
http://support.microsoft.com/kb/977507
In addition to change the name of RDS Server you can use following script.
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
Hope it helps!
Thanks.
Dharmesh Solanki

Safari 7 Preferences: I can't delete a web site login and password

Hello:
I can't delete a safari web site login and password
After tapping delete all there is 1 item still in the box.
¿How can I delete it?
Thak's in advance,
Luis

I had the same problem, and the solution was to delete the entries using the Keychain Access tool, found in Applications → Utilities. You can search for the entry there, remove it, and then it will be deleted from Safari as well.
(I had to do this when I changed my email address on Amazon, and all the auto-login pages had the old email addresses and wouldn't update. I tried to delete them from Safari's passwords dialog and ran into the problem you described).
Note that this question provides the same answer in more detail.

Portal and Non-Exchange Outlook Web-access integration

Hi, Expert,
the question concerns SAP EP integration with Outlook Web Access (OWA).
The problem is that OWA is not based on MS Exchange Server, but on CommuniGate Pro.
So I need any help, here are my question:
1. Did anyone integrate this 2 systems?
2. What is the point where I have to begin from?
3. Do I need any connectors for this activity?
For the completness of my problem: what do i really need is to use calendar (an other Outlook-like things) in my portal.
Thanks in advance!

You could try this if you have Outlook Web Access already working, put the following into a html portlet and just replace the url with your outlook web access url.
Our admin guys have enabled automatic login to outlook if using internet explorer
<iframe height="800" width="1024" src=http://mail></iframe>

Error message when login to Remote Web Access

Hi everyone,
I have a server that is running Windows Server 2012 Essential. All was working fine until one day I tried to login to Remote Web Access. As soon as I type in my user name and password and press enter I am greeted with the following error message:
"Critical Error - Remote Web Access" (this is displayed in the browser's web page bar)
"Cannot connect to Remote Web Access. Please contact the person who manages the server."
I don't know how to fix this problem. I only get this error page when entering the correct login.
I will be very grateful if anyone knows hot to get around this.
Thanks!

Hi John:
Before we get too worried, try "other user" then domain-name\user-name and pw.
Try that and let us know.
Also, and becuse you should do it anyway, run the BPA and fix everthing it finds, look through the event viewer for error messages, and run the BPA from right side under the devices tab.
Larry Struckmeyer[SBS-MVP]

Online Web Access - Login Credential​s and Push to Hub??

Similar Messages

Maybe you are looking for

Online Web Access - Login Credentials and Push to Hub??