Only 0 UN of material 900-002 IBGM available.

Dear All,
While doing Delivery - I have got an error Only 0 UN of material 900-002 IBGM available.
I can see that 100 Units of material 900-002 IBGM is available in this Plant.
However, During Deliver VL01N, It says It has "0" Units of this material.
Please advice me how to fix this issue.
Niranjan

Hi,
Please search the forum before posting your questions.This question was answered a number of times earlier.
Please find the below link which provides a lot of information on this issue.Still if your issue is not resolved please search the forum
[Only 0 EA of material XXXXXX available - While doing goods issue;
Regards,
Phani Prasad

Similar Messages

Delivery cannot be created (only 0 qty of material available )

Hello All,
I have created a sales order for material A on plant B for one qty. The delivery date is 29.12.10 but the system has confirmed the schedule line with a delivery date of 3.1.11. The material availibilty date is 28.12.10.
But when I create the delivery, the system gives message, "Delivery cannot be created (only 0 qty of material available )".
I have checked MMBE and CO09 , there is a stock of qty 2 for material A for plant B. Also there is no other sales order consuming the stock in CO09 for material A in plant B.
The schedule line catergory is CN(not relevant for MRP) in sales order and that is why I cannot see sales order requirement in Md04/Co09. But in any case since the stock is available, the system confirmed the schedule line for 3.1.11 in sales order as said above.
While creating delivery, we are giving a delivery date of 28.12.10 (equal to material availibity date ). I have not checked the availibilty check group but even if checking group= no check, still I think ,the system will confirm schedule line since stock is available and it has confirmed stock in sales order as said above
But still we cannot create delivery and receives the error, "Delivery cannot be created (only 0 qty of material available )"
Pls help.
regds
Pamela

Hi Pamela,
It seems that material A is not available in plant B on 28.12.2010 even if the stock is shown as 2 qty in MMBE
Please go to MMBE place the cursor on storage location and the check the Warehouse stock for that material.
It may be that material qty 2 which is currently shown in stock overview is lying in interim storage type 916 against some goods movement (601) issued against some other sales order.
Also check whether negative stock are allowed in that storage type. In your case , I think they are not allowed.
I hope this helps
Br,
Tushar

Sales order error - Only 0 EA of material 24 is available

Hi friends,
I got this message during sales order creation 'Only 0 EA of material 24 is available'.
I checked for solutions for similar problem in this forum by search button. Could get hold of two unanswered question. I tried possibilities listed there but problem still persists.
Any solutions to resolve this
Thanks

Dear Robert
The reasons could be
- non availability of stock of the material for which you are trying to create sale order
- Already delivery is created and saved without doing PGI for the same material
If the reason is first cited above, then you can create stock via MB1C with movement type 561. If the reason is second cited above, then run VL21 where you can see if any delivery is created and saved without doing PGI.
thanks
G. Lakshmipathi

Only 0 KG of material available

Dear Experts
we are having stocks in supplying site stock also commited but unable to create the delivery for my STO
The errors showing
"Only 0 (zero) KG of material available" along with
"An item with no delivery quantity is not permitted. Item will be deleted"
Regards
Sudha

Error: "5501247331 000030 Only 0 KG of material 850000610 available" (STO of delivery in VL10F)
OSS Reply :
In transaction ovz9, please uncheck "Include sales reqmts" for
Availability Check 02 & Checking rule B.
In transaction OVL3
Shpt plnt SC SLoc
3130 3130 50 -> please change SLoc from 50 to 30
3130 3130 01 50 -> please change SLoc from 50 to 30
3130 3130 02 30
Regd
Sudha

Only 0 quantity of material available..

can any one of you plz suggest , i try to do a test run of sales process.
I have posted enough stock for a material , but when i try to deliver , the system prompts. Only 0 quantity of material available.

Satish,
Though you posted stock and raised the sales order , pls check when is the mat. availale date. If the confirmed quantity is zero which means you should first check the system calculated mat. availabily date .
In VA01 (sales order) click on "Procurement Tab" check the Mat.Av.Dt for the line item. In the same row check if there is any route determined where it shows the Loading date.
Check in VOV8 what are the lead time in days.
System calculates ATP quantity by taking Warehouse stock plus planned receipts minus Planned issues. ATP quantity = Warehouse stock + planned receipts – Planned issues.
Planned receipts: Planned orders, Production orders, Purchase requisitions, Purchase orders, Stock in transfer, Stock in transit, Stock at inspection, etc.
Planned issues: Sales orders, Deliveries, etc. (Check if any open orders are there or the material)

Only 0 EA of material available ( Strange Situation)

Hello Guys,
I have two Materials
Available Stock is Material A(QTY 10) and Material B(QTY10).
Now i have created sales order of each material with 1 qty.
E.G
Material A qty 1
Material B qty 2
i have saved the document and then i have created delivery successfully.
Now i have repeated the same step created sales order with Material A and Material B with 1 Quantities each now this time in delivery i deleted Material B and save the delivery document
then i changed the delivery document(VL02N) and again add the Material B which i have deleted but i get this error "Only 0 EA of material available" although i have enough stock. I am using item requirement 202 Order w.indep.item
Need help

I have deleted Material B then again add the same 1. Below are some examples.
Available Stock MAT A (QTY 20) and MAT B(QTY 20)
Here
Scenario 1
Sales Order:
Material A qty 1 plant 1000 storage 2000
Material B qty 1 plant 1000 storage 2000
Delivery(WRT SO)
Material A qty 1 plant 1000 storage 2000
Material B qty 1 plant 1000 storage 2000
Now sales order created with ref to delivery(VL01N) without any issue
Scenario 2
Sales order:
Material A qty 1 plant 1000 storage 2000
Material B qty 1 plant 1000 storage 2000
Delivery(WRT SO)
Material A qty 1 plant 1000 storage 2000
I have deleted MAT B this time and saved the del doc, now I realized that I have to add Mat B in same Delivery DOC again
Material A qty 1 plant 1000 storage 2000
Material B qty 1 plant 1000 storage 2000 ---> when I try to add the same material I got error.

Only 0 PAC of material available

Hi,
I have created a configurable material "pulsar81" when i am trying to process delivery its giving a msg "Only 0 PAC of material PULSAR81 available"
regards,
John

Hi john
The problem why you are not able to do transfer order is you need spacial stock and that you are not having as , you have not done the mb1c with movement type 411E , you have done mb1c only with 561 E movement type
do initial stock posting entry with movement type 561 E(special stock) . in mb1c
it will be just an unrestricted stock only but not an special stock
to make it a special stock
again post the same material in mb1c with movement type 411 E and save it
Now go to MMBE and see you can see the speciall stock differently and unrestricted stock differently
then you can create transfer order
Regards
Srinath

DELIVER: "ONLY 0 ST OF MATERIAL X AVAILABLE".

Hi, I have a problem with a sales order. I have created a sales order for a material (procurement type E "in house production"). This material has a specific network associated and its status is tecnically completed.
If i see the order it indicates that the confirmed quantity is "1", but as i try to deliver the order it tells me "only 0 st of material available".
I guess i have to execute some kind of movement (in the order it shows movement type "601" as the one associated to this position).
Help me please.
Thanks in advance.
Luis Álvarez.

Hi there,
In your case availability check at delivery is done at storage loc level.
In OVL3 check what storage loc is assigned to your shipping / plant combination.
In MMBE check if there is sufficient stock against that storage loc.
For certain scenarios, business process would require transfer stock from one location to another.
Regards,
Sivanand

Stck is avlbl, facing Error 'Only 0 FT of material 200000000428 available'

Hello Experts,
i have created Scheduling Agreement in Test system, with reference to this i created Sales
order.
i tried to deliver one Sales Order in VA02 for a perticular
finished material with 100 quantity,
i am facing the below errors
'Only 0 FT of material 200000000428 available'
An item with no delivery quantity is not permitted. Item will be deleted.
i checked the confirm quantity in Scheduling agreement its showing confirmed Qty in forecast delivery schedule
, even in sales order all schedule line are confirmed.
i checked the stock of the material in MMBE for the same, Though 20 000 quantity of material is
is available there but still i am not able to deliver the order.
Could you please help in this case ?
Regards,
Sujit

1) Ensure that safety stock is not maintained for that material in material master MRP view
2) Check in VL06G whether any delivery is created and saved for the same material without doing PGI
In both the above cases, though you can see the stock in unrestricted, you cannot post the goods issue.
thanks
G. Lakshmipathi

Only 0 NOS of material JPLTP2511230 available

Dear all
while creating delivery, vl01n, system is giving error message like only 0 nos of material available despite material available
please suggest the way

Hi
Are you trying to create the delivery for a future date. If not, did the incoming of material to the plant has happened as per the schedule.
While proposing the delivery dates in the schedule lines, the system considers various factors including inflow and outflow of material. If the planned inflow has not happened then there will not be any material available 'for this order' to deliver. Check the Tcode CO09 for the ATP quantities. Guess there will not be any ATP quantities, though the stock is there in the plant.
Thanks,
Ravi

"only 0 PCD of material are available"

Hi Everybody,
I have a case, need your help.
I have Customer Sch. Agreement - 'X' for a material 'Y' , for quantity 100.
For Y there is a schedule line dated on 20th Feb 2008 (20.02.2008) - in future for 100.
It is confirmed on that date - 20.02.2008.
Stock for the material in that plant in NIL (0) now.
Present Stock = 0.
Stock will be available on 20.02.2008
Can i create a delivery (delivery date -20.02.2008) on TODAY?
If delivery can be created - Can the delivery quantity be 100?
While trying getting this error msg "only 0 PCD of material are available"
Kindly give some suggestion.
Thanks,
snehasish maity
Edited by: snehasish maity on Jan 31, 2008 8:35 PM

Hello,
As per my understanding:
1) There is no stock available as on today (31.01.2008).
2) The stock will be avialable only on 20th Feb, so you can create the delivery only on 20th or after that (once the material become available in the storage).
3) If you want to create a delivery TODAY, you need to raise the stock manually, then do the availability check in the change mode of the agreement, you will be able to deliver it TODAY.
First of all check the material stock in MMBE, and chek for any requirements in MD04, then you will understand.
Prase

Only 0.000 ST of material 390 0159-833 available

Hi SAP Gurus
when I am creating a delivery w.r.t to the order its giving an eror "Only 0.000 ST of material 390 0159-833 available"
And I have checked in MMBE the stock is available more than the order Qty
Anyhelp is appreciable.
Thanks in advance
BR
Venkat
Edited by: venkat1259 on Oct 1, 2010 5:23 AM

Hi
As the reply given by Sandip,
First I have seen VA05.......Pending sales orders, I found in my system 5 are pending and I deleted them as they are not needed and older ones.
Second::>I checked in VL06OPending deliveries--
I found 4 and deleted them also
Finally----in MMBE there is no stock available for that material
Through MB1C I posted the stock.
After that the error got resolved.
Sorry for late reply.
Thanks&Regards
Venkat

Issue in STO process-"only 0 MT of material available".

Hi All,
I am facing this issue during STO processing using mvt scenario 15 & 16. Let say that i have 5Mt of material stock left at plant A(dispatch plant). When create the load ticket(mvt-15) for the same qty , the ticket is created successfully. Now when i do the unloading ticket(with mvmt 16) the delivery doc gets created with the following error message-"only 0 MT of material available".
I have checked the stock, and the stock is available for at the dispatch plant. Am i missing some configuration settings ?
regards
srinivas

Hi Srinivas,
Have you tried pegging the two line items or even "Auto Pegging"?

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

CV02N Authorization only to Object Link - Material

Hi Gurus,
I want to give special authorizations to a group of users where they can assign materials only in CV02N.
When they enter Document Info Record there he should be accessing only Object Link - Material only, so that he can enter the relevant Materials.
I found the Auth Object: C_DRAD_OBJ, but this is not helping me.. Please let me know if there is any alternative.
Regards
Naveen

Hi,
Apart from Ravi suggestion, you can also create a new document type from DC10 and define only one Object link i.e. material for that doc type. And after that you can provide this doc type authorization (with object C_DRAW_TCD) to your concern users. Its just other way around solution.
Regards
Shishir

Only 0 UN of material 900-002 IBGM available.

Similar Messages

Maybe you are looking for