Only 1 channel work

I replaced the sound card in my computer and only one channel out of two works. I was only able to plug (larger) of the two plugs from the motherboard into my card. Is this the problem? The board has two wires with white plastic rectangular connectors, one big(installed) and one small(does not fit new card).

Hi,
Whats the card you have?
John

Similar Messages

  • My MacBook Air headphone jack only left channel works

    Builtin speakers are working fine on my MBA 2012, but when I plug any kind of headphone into the jack, only left channel works. If I tune output balance to right, then sound nothing.
    I found there are only four metal contacts in the jack, two on each side, then one for ground, the other one for left channel, none for right channel,  what about yours?

    At last, found it isn't a problem, actually any 3.5mm headphone of standard can work, just plug into the jack fully ( only one mm left ) .  enjoy ~~

  • Only one channel working - fixable?

    Recently my ipod starting playing only one channel through headphones or a speaker jack - eg I can hear only whatever is coming through the left side speaker. I've verified that the problem is with the ipod, not the headphones. However, if I put pressure from a specific angle on the headphone cord right above where it connects to the ipod, both L and R channels work. This goes away again when the pressure is released.
    Has this happened to anybody else? Is it a fixable problem?
    Thanks!

    You need to replace the headphone jack on the iPod.

  • DV7t-1285DX - 3 speakers, only 2 work (right, left channel out through subwoofer)

    So I recently purchased a DV7t, and while I love the machine I'm having an issue with the speakers. Windows Vista Ultimate 64 is only detected two speakers no matter what drivers I'm using (including latest IDT release). I get right channel sound through the right speaker, left channel sound through the subwoofer, and no sound at all through the left speaker. I've tried different drivers and what have you, so far no joy.
    This question was solved.
    View Solution.

    Ok, so I bit the bullet and dissassembled my notebook today. As I was putting it back together, I realized that one of the prongs in the speaker plug (male reciever, on the mainboard) was bent neatly upwards. I carefully bent it back into place, got everything put back together, and now all three channels work! While this might be the issue in all cases, it fixed the problem for me. If you try it yourself, be very very careful when you try to bend the prong back into place, they break off easily and unexpectedly, and if you break yours off it's shot for good. Good luck.

  • Problem to get all channel work

    I am designing a system to read temperature using SCXI1000,SCXI1100,SCXI1303,type T Thermocouple, and Labview7. The problem is that I want to use 9 channels, but only one works ( channel 0)when doing a test on the channels using MAX. I am wondering why that happen. Is it a hardware problem, configuration etc....Please give me an idea what may happen.

    You do not have a hardware or software problem. When you use an SCXI chassis, all the channels are mutiplexed through channel 0 of your DAQ card. You will not be able to view any of the channels by merely referencing channel 0 using the Test Panel function.
    You could use one of the SCXI-1100 example VIs that ship with LabVIEW, or, you could consider using Measurement and Automation Explorer (MAX) to create virtual channel names. This will serve several purposes:
    1) It provides uniques names for each channel
    2) It simplifies the channel call syntax during acquisition (you would use T0,T1,T2... instead of ob0!sc1!md1!0:8
    3) It provides a means to output reduced temeprature data directly without writing a VI for data reduction
    4) The temperature readings will alread
    y be referenced to the cold junction on the 1303 module, and,
    5) You will be able to use the channel viewer within MAX to view all of the temperature readings.
    To create a virtual channel name, launch MAX. Under the Configuration tree (LHS window) RIGHT mouse click (RMC) on the Data Neighborhood entry and select >> Create New...
    In the pop-up window, select Virtual Channel and press the finish button. Now follow the Channel Wizard prompts to create the virtual channel. Choose any name you like for this first channel. Once completed, you can go back to the Configuration tree, RMC on the channel name and select "Duplicate...". It will create muliple copies and assign them sequential names and assign them to sequential channels on the 1303 module. Once you have finished, you can view the channels using MAX. If you Select TEST on the top menu bar, a window will be launched that will allow you to view the reduced temperature readings.

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • My laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea

    my laptop lost all his sound n speakers..only headphones work.is a g6 b1z96ea
    what the hell is going on??i tried anything but doesn´t works

    Is "Do not disturb" activated in the Settings?
    Did you try to set up the phone as new device without using the latest backup?
    How to back up your data and set up as a new device
    Also try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    copied from Troubleshooting iPhone hardware

  • I can't see any video website like youtube, vimeo, even facebook. My flash player is installed and it's work because I still can see the video in IE, only on Firefox it only audio work, the video is all blank(black), anyone can help me?

    I didn't update or download anything, then today I can't see any video website like youtube, vimeo, even facebook. My flash player is installed and it's work because I still can see the video in IE, only on Firefox it only audio work, the video is all blank(black),
    when I restart my PC again the video can work just first video, then when I see another website video it all black...... (but sound still work)
    anyone can help me?

    Try to disable the hardware acceleration in the Flash Player.
    See:
    * https://support.mozilla.org/kb/Cannot+view+full+screen+Flash+videos
    * http://www.youtube.com/swf_test.html (right-click the player: Settings)
    Flash "Display settings" window:
    * http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Why after updating to ios 7 on iphone 4g do I have 2 facebook icons?  Only one works.  How do I get rid of the other one?

    I recently update to the new ios 7 software on iphone 4.  Now I have 2 app icons for facebook.  Only one works and opens facebook.  How do I get rid of the other?  Tried deleting it out the old way but it has no "x" to take it out with?

    okay never mind.  I powered off and back on and the second not working icon is gone.  So if anybody else has this same problem, give it a try

  • Is it possible to modify the Calendar object to only show working days?

    Is there a way to configure the Calendar selection, duration calculations, and notification dates in the system to only include working days (i.e. holidays and weekends are not counted and not available for selection)? This is particlular for Purchasing and Sourcing Modules.
    Thank you.

    This can be changed through registry:
    https://msdn.microsoft.com/en-us/library/ff800821%28v=ws.10%29.aspx
    You can do the change through group policy preferences, or some other method you prefer (ConfigMgr compliance settings for example).

  • Can Contacts be set to display only enterprise (work) email contacts upon first opening?

    I have installed my personal Yahoo Mail on my 9810 Torch; as a result, the Contacts list now includes a mix of work and personal when first pulled up.  I can then change it to display only one of my contacts lists (work or personal), but that requires several thumb fiddles every time.  Is there a way to have the Contacts display default to only my work contacts displayed upon opening?

    Hello forrest103 and welcome to the BlackBerry® Support Community Forums.
    Thanks for your question regarding the contacts on your BlackBerry® Torch™ 9810 smartphone.
    By design, the BlackBerry will display all contacts when you launch the Address Book.
    You would need to use the Filter option to view your personal separately from your work contacts.
    Hope this answers your question.
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Read-only forms work great - page fails to load on interactive form.

    we have a weird issue.
    we moved all our Adobe development (which was all new) to our QA environment.
    Our 1 interactive form fails to even display, while all the other read only forms work fine.
    I changed my interactive form to ENABLED off (unchecked) and moved it to QA - and it displays fine. I changed ENABLED = checked, and it's not working.
    any ideas?

    chintan,
    we figured this out late yesterday - I was selecting all the business partners for a drop-down list in the form . It turns out another developer loaded 30k business partners in RPM. So, this was causing the form to blow up.

  • Created 2 slideshows, but only 1 works??

    Hi there
    I have created two slideshows, but only one works. I have
    reverted back to the tradisional tile layout of images of the one
    that does not work, but that is not what my client wants.
    The one that works can be viewed at
    Catering
    The images of the one that does not work can be viewed at
    Gallery
    I am using the same player in both cases. I have tested both
    on my laptop using all browsers I could think of. After I FPT'ed
    the files to the hositng server, the Gallery does not display
    anything in the "Image Viewer". Thumnails, headers, etc are
    displayed.
    Any suggestions? I am at a complete loss.
    P.S.: I am using Fireworks and Dreamweaver CS3.
    Many thanx

    Check these out:
    iPod Does Not Appear in My Computer
    iPod Appears in Windows but not in iTunes
    I hope this helps!

  • Why is it when I plug in any headphone that only one works?

    Why is it when I plug in any headphones that only one works?

    the song is in mono or only one track
    one of your headphones is broken
    there's something wrong internally in your iPod.
    Try different songs to see if all of them only play on one side. also try apps to see if the sound is on one side or both.
    Try a different set of headphones/ear buds to see if they sound different
    if neither of the above fixes it then you may want to have Apple check out the device and see if the jack is broken

  • Adobi sc6 will it work on windows 7 32 bit computer my copy seems to be only half working

    can anyone help with this question. its only half working and i cant get things done

    Not sure why you haven't had a reply all this time, but yes, CS6 will work on a 32 bit system, but you are going to be very short of RAM.  What do you think is missing?   The 3D menu will not work unless you have the Extended version of Photoshop, and I believe you need at least 1Gb of video RAM.

  • 2g shuffle only half working

    I've recently changed from a pc to mac, Silver mac book osx, my ipod now only half works. It auto fills but won't auto sync. Half the file controls are greyed out in the menu. This includes the find duplicates command. My itunes as already duplicated over half my library when I entered my music back off my external hard drive so I need this. Tonight I tried to load itunes with some new content and found I can't load a play list ei recently added and then auto fill the rest. Why not I could do this on a pc? I the tried to fill it manually and it duplicated the albums I added manually ,1 had each song 4 times. my playlists won't sync with the pod either. I thoughgt mac's where better this is as bad if not worse then my pc this is also coming on the same day i've been told my printers unsuported with drivers by either apple or lexmark and is basically a paper weight. Is my shuffle basically stuffed as well? I've done the 3 r's every time I've charged/refilled the thing.

    iTunes in Windows and the Mac operate exactly the same way.
    If you are having problems is will be due to how you have set up iTunes.
    Your post is not very clear to be honest and I am struggling to understand exactly what you are trying to say.
    You have trown to many issues and questions into the same post and it is hard to see what you are trying to get an answer for. Do you have an issue with your iPod or iTunes?

Maybe you are looking for

  • FINT interest calculation on cust overdue items from net due date required

    Hi. I am running FINT option i am running interest calculation from net due date onwards whereas the system is calculating the interest from Next date of due date. For example: Customer invoice is raised on 01.01.2011 and Net due date is 01.01.2011.

  • How to Convert Normal XML date or Oracle date to JDE Julian Date

    We can do a simple mathematical step in XSLT : 'xpath20:format-dateTime(xpath20:current-dateTime(),"[Y0001][d001]") - 1900000' Or in SQL : Select to_char(sysdate,'YYYYDDD')-1900000 from dual; Julian Date is: Year in 4 digits, YYYY, and Number of days

  • Find_report_object('rp2rro') how can this work?

    Hi I've spent a long time looking thru metalink (now Support) at the various posts and documents on calling reports from forms using the run_report_object that the translator replaces run_product with, and here and I'm frankly still looking for direc

  • Remove color profile from an image

    How to remove color profile from an image is it possible through any script? Manual Try - Don't Color Manage this Document: option is used to instruct Photoshop to remove an existing embedded profile but when I save the file, close and open it I stil

  • Incorrect logical expression: Comparison / SELECT-OPTION can only be follow

    Hi, I'm new to ABAP, please help me with the below code. When i check the code i get the message "E:Incorrect logical expression: Comparison / SELECT-OPTION can only be followed by "AND", "OR" or ")". data: pphd(7) type p decimals 2,           ppha(7