Only 1 hyperlink per slide works after exporting as QT movie

I'm trying to export a keynote presentation with several hyperlinks per slide as a quicktime move. Afterwards, only one hyperlink per slide will work????

Welcome to the discussions, betheljb.
The hyperlink that works, does it take you to the next slide?

Similar Messages

Keynote hyperlinks don't work after exporting to html

I'm working with Keynote in iWorks '08 on an iMac running OS 10.5.2. My hyperlinks (graphic and text) work perfectly running Keynote as a slide presentation, but not when I export it to an html format. What am I doing wrong here?
Thanks for any help you can provide.
Jeff
PS: The hyperlinks do work after exporting in flash or pdf format, but our webmaster says I can't use those formats due to compliance issues.

I noticed this as well. What I realized is that Keynote seems to just export the slide as a .jpg with a an .html file referencing the .jpg image. So in essence it is not creating an .html file of the slides contents but rather a reference to a picture of the slide. I haven't tried but maybe "send to" iweb and then "publishing to folder" will give you what you need. Not sure.

Are Hyperlinks supposed to work after PDF export?

The web and e-mail links I created for my newsletter work fine in Pages, but when I export to PDF to share with everyone, the links don't work (they're still blue and underlined... just not clickable.)
Aren't the hyperlinks supposed to survive the export to PDF option? If so, is there a setting or preference I've overlooked? (I made sure the "make all hyperlinks inactive" checkbox is unchecked)
Thanks in advance for any help...
Dual-processor G4, 1GHz Mac OS X (10.3.9)

Welcome to Apple Discussions David
This is a rather old thread. Since the previous last post a whole new version of iWork with Pages 2 & Keynote 3 has been released.
Using the OS X Save As PDF... option in the Print dialog (as you probably did with the Word document) creates a picture of the page. Just like you can't click on a printed piece of paper with the blue, underlined links or a scanned picture of something with a web address without software to recognize them as links. The links are underlined because that is what Word does with them & you can click on them in a Word document opened on your computer.
I haven't tried it yet, but others have reported that the Export to PDF function in Pages 2 does retain active links...
I just did a quick test by putting a hyperlink in a Pages 2 document & both exported & printed it as PDFs. In both documents opened in Preview it looked like the links were active & clicking them took me to my web browser, Safari, but neither one opened the page the link was to.
Peggy

Drill Down is not working after exporting to excel

Hi,
I have created a drill down report in SSRS . Its working perfect. But when I export it to excel, it is showing only the expanded nodes. But I want the same functionality which gives user to expand or collapse the nodes in Excel as well. Can any one please
help me with this?

Hi sil174sss,
Per my understanding you are experiencing the issue with the excel report which have add the drill down action, after export to excel only the expanded nodes included and the collapsed nodes is not shown, right?
Generally, if we expand the nodes before export to excel then the excel will display the expanded details row and keep collapsed the details row which haven't expand, but we have the toggle "+","-" on the left of the Excel to help
control the expand and collapse, when you click the "+" you can expand the collapsed notes to see the details rows.
I have tested on my local environment with different version of SSRS and can always see the "+","-" as below:
On the Top left corner you can find the "1","2", this help to control the "Collapse All" and "Expand All".
If you can't see the "+","-" in the excel, the issue can be caused by the Excel version you are currently using, and also excel have limit support of this, please provide us the Excel version information and the SSRS version. You
can reference to this similar thread:
lost collapsing columns when export to excel
Please try to export other drill down report to excel and check if they work fine, if they did, the issue can be caused by the drill down action you have added in this report is not correctly, if possible, please try to redesign the report.
Article below about how to add Expand/Collapse Action to an Item for your reference:
http://msdn.microsoft.com/en-us/library/dd220405.aspx
If your problem still exists, please feel free to ask
Regards
Vicky Liu

MapiSendMail doesn't work after Exporting a report in CR2008 (Outlook2003)

Hi,
This one sounds crazy but I'm hoping this might make sense to someone..
We're using CR2008 SP4. In our WinForms app, we use the MapiSendMail function to open up a new email message for the user to send.
This issue only occurs when Outlook 2003 is installed (outlook 2007 and 2010 work fine).
If, in my application, I call MapiSendMail to send an email before exporting a Crystal Report to PDF .i.e oReport:Export() then both the export and sending mail work fine as long as I'm logged into my app.
If, however, in my application, I export a Crystal Report to PDF .i.e oReport:Export() and then I try to call MapiSendMail I get a generic MAPI erorr(2). I have to log out of my app to be able to open up a new mail message.
Is there anything in the Report:Export method that some affects default MAPI behavior?
Thanks,
Fergus

Hi Don,
Many thanks for getting back to me. I've found a workaround without having fully understood the cause. I'll put it all down here in case some others have similar problems.
I was already closing and disposing the report object in my code as soon as the export completed.
The Mapi error 2 is MAPI_E_FAILURE which translates to "One or more unspecified errors occurred while sending the message. It is not known if the message was sent."
I could not find any any "Access Denied"s using ProcMon.
I used the Modules.exe to determine which dlls were loaded when the MapiSendMail worked correctly and compared that to when it didn't work. One dll that poped out was "outex.dll".
I searched for that in ProcMon and (in the case where MapiSendMail didn't work) and found that it was looking for this outex.dll but couldn't find it. It's located in C:\Program Files\Common Files\System\MSMAPI\1033 but it never looked there.
So:
Calling MapiSendMail before exporting a report - outex.dll can be found
Calling MapiSendMail after exporting a report - outex.dll can't be found
To get around this I added C:\Program Files\Common Files\System\MSMAPI\1033 to the path on the machine(s) in question and it worked every time.
Thanks again for your help.
Fergus
p.s. After finding this workaround I found an almost identical problem but with Oracle instead of Crystal (How to serach text via TREX with cryptograph attachment in SAP system?).

Acrobat 9 - Hyperlinks don't work after optimizing.

Acrobat 9.5 on Mac: hyperlinks go away after Optimizing. I use Quark 9, and after exporting to make the PDF, I have a large file size. When I open the PDF in Acrobat, all my hyperlinks created in Quark work. Then I use Optimizer to reduce the file size, and the hyperlinks go away. How can I keep them live without going back through and manually linking them to a webpage?

I can confirm that behavior in Acrobat 9 Pro (and in Acrobat X Pro as well!). I unchecked all the options in the Optimize dialog except for changing Images (unchecking all the options to discard various kind of data). It should not remove hyperlinks but it does. I've never notice (or heard about that) before.
I would tweak your PDF settings in QuarkXPress to reduce file size (or downsample images ahead of time if Quark is not capable of doing that).

URL button doesn't work after export into ppt/word/pdf

Hi,
I am working in Xcelsius.
Lets say I have placed a URL button in the Canvas and mapped that to a path of the file(which is not actualy an URL),but any path of the file which is present in the local system
After exporting this dashboard into ppt(or word/pdf),when i click the button,its not redirecting me to a target.
But during Preview of dashboard,it works fine.But after exporting,the URL button not redirects me to the path specified.
Rgds,
Murali

Hi
U got any solution for the above problem?
Thanks
Kothai

Motion tween created not works after exporting,but works in TEST MOVIE(ctrl+enter)

I am using adobe flash cs4 and actionscript3
my project consists several different layers using classic motion tween option available in flash cs4
my project works fine when I test the movie using Ctrl+Enter
but after exporting my animation remains stationary
If any one knows how to solve this please do reply me. It will be very helpful to me
Even it is a simple setting please do reply me .
It is very urgent.
thank u in advance

Are you using any ActionScript at all or is it all just motion on the timeline?
If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
Good luck!

Motion tween created not works after exporting as SWF,but works in TEST MOVIE(ctrl+enter)

I am using adobe flash cs4
my project consists several different layers using classic motion tween option available in flash cs4
my project works fine when I test the movie using Ctrl+Enter
but after exporting as SWFmy animation remains stationary
If any one knows how to solve this please do reply me. It will be very helpful to me
Even it is a simple setting please do reply me .
It is very urgent.
thank u in advance

Are you using any ActionScript at all or is it all just motion on the timeline?
If you're not using any AS then you can try to add a little to force it to play. Just add a new layer at the very top. Click on the first frame (which shoudl be a keyframe - if it's not make it one) and press F9. This will open your Actions window. In the window type "play();" (without the quotes). Not sure if that will work or not but it's worth a try!
If you are using AS make sure you don't have a stop(); action anywhere that's not being controlled.
Good luck!

Menu Buttons won't work after exporting to flash

This is a strange problem, and I can't seem to figure it out.
I've created a demo DVD with my work on it. The DVD navigates and works fine. It has a "First Play" and the end action to the first play is the main menu. There are 6 buttons on the main menu. 2 Buttons link to 2 other menus which have my work broke down by category. 3 buttons link to 3 different and separate timelines, like a graphic montage, replay the first play, and play all. Then the last button just links to my contact info. It all works fine on a DVD export.
When I export to flash, once the first play finishes playing, and the end action is triggered (which is to go to the main menu) none of the buttons will work on the main menu page. If reload the page, and while the first play is playing, I skip first play by going to the main menu (by clicking on the flash button for main menu), the buttons on the main menu will work fine. But once I go to one of the sub-category menus and play something, then click on the "Back to Main Menu Button", it won't work. I am stuck on that sub-menu.
Same thing happens if, on the main menu page, I click on "graphic montage". When the graphic montage timeline plays all the way through from start to finish, the end action takes me back to the main menu, but none of the buttons on the main menu button work. But if I interrupt the "graphic montage" by clicking on the main menu flash button, and go back to the main menu, then the buttons on the main menu work fine. This problem only seems to happen when I click a button and the timeline play in it's entirety. If I interrupt the timeline (say like half-way through) the buttons on the menus will work fine.
I hope this all makes sense. It's hard to explain. But if you do understand what I'm trying to say, any help would be grateful.
Thanks. Tom

I'm in the same boat as Thomas.
I've created a DVD w/ 1 Main Menu & 1 Sub Menu.
Main = Chapter Select & Play All. (both links work)
Sub = 9 links to Chapter Points & Main Menu. (NO links work)
I only have this problem when I export to Flash.
Everything seems to be fine when I preview or create a DVD.
I have tried with Firefox, InternetExplorer, & Safari; both locally and loaded to the server.
It is currently sitting at: www.media.bodyshoptv.com/CCVIP_Orientation
HELP!

Hyperlinks aren't working after I publish - any suggestions?! Captivate 5

Hey everyone,
I've just created a project here and used a click box to link the learner to a hyperlink (external website http://.....). I've tested this out in the "preview" mode and the hyperlink works. Next, I published the project and now the hyperlink doesn't work. I click on the area and nothing happens...not even an empty browser window will appear. Has anyone else run into this issue?!?!
Any assistance in this would be greatly appreciated!
Thanks

Hi folks
Actually, this (among other common issues) is discussed in a page that we hoped users would find prior to having to ask for help.
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Slideshow audio timing is off after export to QT movie

I created a slideshow in iPhoto and put one song with it. I times all the slide durations so that the music would fade out exactly at the end. After exporting to a QuickTime movie, however, the slideshow is finished before the song is... the song is off by at least ten seconds.
I believe I get better image quality if I do the show in iPhoto as opposed to iMovie, which is why I used iPhoto to begin with. But if the show will not synch, what other choice do I have?
Any suggestions?

Did you take into account the transition times. That has thrown me off a number of times. Do you have the Fit Slideshow to music option selected?
Another application that creates, IMO, terrific slideshows is PhotoPresenter. It has 25 or more themes and can save the slideshow, with Fit slideshow to music, to a variety of formats, QT, for iPod, HD, etc. This is one of their many themes.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

What is the reason for this error? after export part of movie broken

hi, i cannot find the reason for this strange error that happaned to me for the first time, you can see the outcome here:
http://picasaweb.google.com/p.cardash/IMovieBug/photo#5164317113276584274
after exporting in imovie to h264 .mov file, from HDV project, resolution is twisted, plus, the part that was supposed to fit hole screen, is black and sometimes with little graphic errors.
i tried about 10 times, with different setting, resolutions, and other parameteres.
after exporting for ipod, everything is ok, in m4v format.
what is wrong? i use the same method for creating and also for exporting, as in previous projects. i didnt use any new transitions, efects nor titles...
any thoughts?
best to You,
Piotr

ok, i think that i know where is the problem, but i still dont what is it
ive copied my file to a new mac with just installed imovie and everything is the same,exactly the same output. so 100% positively the problem is within the particular project.
i didnt check my mackbook with TT, since i dont have it and dont want to pay i thought its for free
i`ll try later to figure out what wrong and what part of the project is bad.
for now, i think i hate imovie again :)) piece of..
let me know how your case ended.

Perfect audio in FCPX timeline, distorted after export to QuickTime mov

Anyone experiencing distorted audio with a QuickTime movie file exported from Final Cut Pro X? The audio sounds great in the timeline, but muffled and distorted after exporting it. Here's the kicker, I took that same file and opened it using QuickTime 7 and the audio is fine. I took that same file and converted it to a WMV file using Flip Player, and the audio is fine. So it would seem that the problem is the newest version of QuickTime (v10.4). If any of you have come to a similar conclusion, is there a way to remedy this? It's problematic because when I upload the file to YouTube, the distortion is present. Thanks in advance to everyone who can assist with this.
MY SYSTEM:
MacBook Pro (Retina, 13-inch, Late 2013), 2.8GHz Intel Core i7, 16GB RAM
OSX Yosemite 10.10.2
FCPX v10.1.4
QuickTime v10.4

Hi Al,
Here are the steps I use to export:
From the File menu, I select 'Share' and select 'Master File'
In the pop-up dialog box I click on 'Settings' and select 'H264' as the CODEC
I open the rendered file with QuickTime Player and the audio is distorted.
I open the rendered file with QuickTime Player 7 and the audio is fine
I convert the exported file to a WMV file using Pro version of Flip Player. The audio in the resulting file is fine.
I'm no expert but this would on the outset appear to be a problem with QuickTime v10.4. I can't seem to find a way to resolve this. Thank you for your assistance.
FYI - the audio file for the project is pulled in to FCPX as an mp3 directly from the iTunes library via the 'Music and Sound' browser.

Footage is jumpy after exporting to Quicktime movie

I have final cut pro 7 and im working with to different type of footage. One is from my canon t2i and the other is sony 500v AVCHD. Everything was logged and transfered correctly as prores. Everything plays well in the sequence no jumping between between muiltcam shots.The problem comes into play when i right click on the sequence and export to Quicktime movie. I keep all of the default setting of the sequence it was created from. Again everything plays GREAT in the sequence, so i dont think i have any corrupt files.Its weird its like it jumps from 100% on a clip to 98% and then back again. It doesn't play this way thru the entire sequence. I have the new 27 IMac

Did you transcode to ProRes HQ?
If so, your system and or hard drive may not have enough juice to play it back in Quicktime without skipping.
ProRes LT is what your clips should be transcoded to.
If you have Unlimited RT activated for the sequence with dynamic settings, it may appear to play back correctly, but actually the quality and/or frame rate may be lowered slightly for realtime playback.

Only 1 hyperlink per slide works after exporting as QT movie

Similar Messages

Maybe you are looking for