Only 1 speaker is working correctly

I have an HP Pavilion desktop on Windows 7. Today I noticed almost no sound in the right speaker and the sound that is coming out is distorted. Since my speakers were old, and I assumed going bad, I went out and bought a nice new Logitech set. Sounds great, but the right speaker still has barely any sound, so it turns out the issue is not the speakers. If I plug in headphones to my PC, I get sound in both ears just fine. If I plug the headphones directly in to the new speakers, I get sound. The only time the right speaker has any issues is when there are no headphones. I went to the device manager and played a test. Great sound in left speaker, but only about 10% in the right and it is distorted. The device manager shows everything is ok and sound is balanced. I ran the troubleshooter and it recommended a new driver but that didn't accomplish anything.
Any ideas? Thanks in advance!

Agreed. No response from them at all. I went to another forum and they think it could be the jack port where you plug the speakers in to the back of the computer since it is only 1 speaker and I've tried everything else. I'm buying an adapter for $6 and going to see if that fixes it. Worst case I'm out less than $10.
http://www.amazon.com/Syba-SD-CM-UAUD-Adapter-C-Media-Chipset/dp/B001MSS6CS
That is what I'm going to try.

Similar Messages

Purchsed new Apple 4S just two days back.Only RHS speaker is working.No sound is coming out fromLHS speaker. What could be the problem?

Purchsed new Apple 4S just two days back.Only RHS speaker is working.No sound is coming out fromLHS speaker. What could be the problem?

There's only one speaker, the other is a microphone.
See p. 9. of the User Guide.

IPhone 5 speaker not working correctly

My iPhone 5 speaker works, and it doesn't if it gets turned up too loud, or my phone rings for a call, it's like it's too loud and the speaker stops working until I blow into the speaker. This doesn't always work either and requires acouple tries. Can someone please help? I don't want to send it in

There is a known problem with the original speaker module installed in the Iphone5. If you experience crackling, static, or no sound at all from your phone and you've checked to make sure the volume is on, then it's likely an issue with the speaker module. Apple will replace the phone or module for free for a year from the date of purchase but MAKE SURE YOU MAKE AN APPOINTMENT with the Genius bar, don't just show up, they only do repairs or exchanges if you have an appointment. You can make one on line. WARNING - if you purchased your Iphone5 from Verizon or another carrier and they are willing to exchange it make sure you don't get a refurbished phone because it's likely to have a defective original module in it too. Make sure you get a NEW, recently manufactured Iphone5 with the new generation speaker module. I went through three phones before I went to Apple instead of Verizon and got it replaced. if they have a new speaker module in the Apple Store, they can just put a new module in your phone on the spot and you're good to go. If they don't have one in stock, they just give you a new phone.

Firefox / flash playback problem related to the trackpad or mouse. On flash sites, e.g. YouTube, video is halting while audio is continuous; influenced by moving touchpad on MacOSX. FF only problem as plugin works correctly on Opera and other browsers.

Shockwave 10.3.183.10

Try to disable the hardware acceleration in the Flash Player.
See:
* https://support.mozilla.com/kb/Cannot+view+full+screen+Flash+videos
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Only right speaker works SleekBook 15 b086sr

Hi,
Just got new HP SleekBook 15 B086sr, but only right speaker is works.
This is hardware or software problem, for now I have a time to bring it back to store.
Could somebody help me.
Os: WIndows 8
Product #:c6t79EA#ACB
Serial {Content Removed}
Thank you.

Hello Igor2012,
I see that you are having problems with the right speaker not working on the computer. I have a couple of suggestions that may help with this issue.
Here is a link that has some troubleshooting steps for no sound. Follow the steps int he link and it may help with your issue. Try to uninstall and reinstall the driver and make sure it is updated.
Let me know if this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT1349 Only one speaker works on my iphone4, how can I repair this or is there a setting I can change that I am unaware of?

I have found only one speaker is working on my iPhone 4.
IS there a setting I am unaware of or something I can do to fix it?

If you are referring to the speaker at the bottom of the iPhone, there is only one speaker. The other similar looking item is a microphone.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

When I plug in headphones or use audio jack only one speaker works.

I have an iphone 4g. When I plug in headphones only one side works. When I plug into my car audio jack...only one car speaker works.

There is only one speaker, the other side is the microphone.

Iphoto 9.2.1 leopard scrapbook theme not working correctly. THe opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there. It works fine in LION "only 1 image" on opening slide.

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

I spoke to the reseller today and they aggred to exchanged it. They didn't elaborate on the actual cause but thought that it had to be a hardware issue.
It could either be the issue that Euvix suggested or it could be as simple as the outer speaker is simply not working.
Anesi, did you use the phone before the upgrade? Looking at what you've written I take you didn't so I would go back and get it exchanged.

Web Application working correctly only with Everyone user added to user privilages

Hello,
I have an web application in Sharepoint 2013 which only works correctly with the Everyone (Read Only) user added to User Privileges in Central Admin.
If I remove Everyone user from user privileges, user domains, that are added to access groups in Site Permissions, are directed to Request Access page of the site. I cannot understand how is this happening, specially because I have other Web App on the same
server which are working correctly.
Could you please advice me how could I trace the problem and resolve it.
Thank you!

Hi Bogdan,
According to your description, my understanding is that Everyone user cannot access the web application except adding the account to user policy of the web application in Central Administration.
I recommend to check if the Super Reader account has been given the Full Read permission on the web application in Central Administration.
If not, add the account to the User Policy of the web application and grant Full Read permission to the account.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

HELP! Ear speaker not working ONLY on calls

Hey,
I just ran into this problem today and am really frustrated. As of 3pm today my ear speaker stopped working but only when I make a call. I can still hear my music and sounds and ringtones but when I connect to a call it doesn't work at all.
I have tried the windex/alcohol method, tried the plugging in and unplugging ear buds, tried the turning on and off the speaker phone and still nothing works. I also tried a hard reset and still have the same problem. The only thing I haven't tried is a full blown retsore and was hoping to get an answer here before trying to restore the device. I have an iPhone 3Gs. Anyone here have any tips or thoughts as to why this stops working on calls only and works fine on everything else?
I can hear the keypad when dialing but as soon as I hit "Call" the speaker just stops working. HELP PLEASE! Thanks.
Seth

If doing the hard reset (holding power button and home button) doens't work, try restoring the phone as a new phone.
if that doesn't work - my guess is hardware failure. Call apple if under warranty or contact your carrier.

Only my right speaker is working!!!!

On my new iphone 4s only my right speaker is working!!!! i took in US,and using in India,sumbody help me
Is it due to equilizer balance or my speakers have gone????
tanx in advance

If you're talking about the built-in speaker, there is only one. The left one is the microphone (see image below).

Only 1 speaker is working correctly

Similar Messages

Maybe you are looking for