Only 10 results from spotlight with Vantec NexStar MX on AirPort Extreme

I have a Vantec NexStar MX (dual 3.5" drive enclosure) and a NexStar 3 (single bay) attached to my AirPort Extreme as a NAS. For some reason, when I search for a result in Spotlight, it will only return 10 items max from the MX. When I search for something on the NexStar 3, I get all the results.
There's no help on the Vantec support page about this. Has anyone had similar issues, and found a solution to resolve it?

Could you explain how your network is configured?
it can't find the server.
Could you explain this more or give the text of the error message?
10.2 won't do WPA, but it works with WEP just fine.

Similar Messages

[svn] 4112: Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type .

Revision: 4112
Author: [email protected]
Date: 2008-11-14 10:05:42 -0800 (Fri, 14 Nov 2008)
Log Message:
Further work for FXG to SWF transcoding - checking in some work resulting from collaborating with Kaushal to correct FXG transforms and gradient transforms as well as cater for differences between Java AffineTransform and the SWF Matrix type.
QE: Not yet.
Doc: No
Checkintests: Pass
Reviewer: Kaushal
Modified Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/GraphicContentNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/LinearGradientFillNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/fills/RadialGradientFillNode.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/LinearGradientStrokeNode.j ava
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/strokes/RadialGradientStrokeNode.j ava
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/AbstractFXGGraphics.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/swf/TypeHelper.java
Added Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fxg/dom/ScalableGradientNode.java

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!

Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

trying to find out same thing , store said works with new intel processor, My mini dont finding.....

Does Airport Extreme works with Lenovo ThinkPad(L420), Does Airport Extreme works with Lenovo ThinkPad(L420)

Does Airport Extreme works with Lenovo ThinkPad(L420), Does Airport Extreme works with Lenovo ThinkPad(L420)

The AirPort Extreme fully implements the IEEE 802.11 wireless protocols for a through n and will work with any computer that uses a compliant version of any of those protocols. So, yes it will work with the Lenovo as long as the Lenovo is not doing something strange with wireless.

When using the search function in mail I only see results from the current year. how can I see results from all years?

When searching mail results only contain messages from the current year. I'd like to see results from all years. This just started after upgrading from Snow leopard to Lion.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Is it possible to have the result from webservices with oracle8i

hi,
i call webservices MS .net with package utl_http under oracle 8i.
exemple:
DECLARE
x utl_http.html_pieces;
msg varchar2(12);
BEGIN
x := utl_http.request_pieces('http://localhost/ServiceNotification/Notification.asmx/NotifT?messagetmp=' || msg);
END;
I don't know how to have a result from a webservices!
thanks for helping me.

While the following paper is Oracle9i DB specific, conceptually, what is done should work with Oracle8i.
Bear in mind that the use of XMLType is specific to Oracle9i DB R2 so if you were to follow the example, you would have to use varchars and probably acept the result into the PL/SQL XML Parser. See:
http://otn.oracle.com/tech/webservices/htdocs/samples/dbwebservice/DBWebServices.html
Mike.

Printing problems with HP 1012 connected via Airport Extreme - resolved?

I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
Stan

I hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK

A few questions from someone considering whether to buy an Airport Extreme

Hi there,
I've spent the last couple of months grapping with an APPALLINGLY bad router from D-Link that has had more problems I can count on all my fingers and toes. I'm deciding between whether to replace it with kit from Netgear, Belkin or Apple. If anyone here who has Apple's net connection hardware could help me out with either of the questions below I would be most grateful and award points accordingly.
Q1.) What is the difference between the new 'AirPort Extreme Base Station' and an 'Airport Express Base Station with AirTunes'? I can't figure it out and am therefore unsure as to which I would need.
Q2.) It is essential for me that the access to the utilities or management interface (whatever you wish to call it) for the router is secure. I have a nightmare of a brother, who would do just about anything to be able to tinker with the settings to stop family members getting online everytime he gets annoyed with us, so it's essential that I can set up a password so only my dad and I can use it. Does Apple's gear allow this?
Thanks alot for your time,
Charity

Thank-you so much, that table is fantastic for comparing things. At first I thought the 'AX' was a like a range booster or repeater, but as I understand it now, it can either act as a booster for a network using another router, or it can work as your main router itself.
I have concerns about the quality, reliability and lifespan of both the AEBS and the AX, as there are some bad reviews on the Apple Store pages, so that's a risk I'll have to weigh up against the Belkin and Netgear routers by having a look around online to see which ones seem to have the better track record. Nothing can be as bad as the D-Link, that much I know for sure.
Thanks for the help.

Basic problem with connecting to disk via Airport Extreme - No Disks Found

I've a Lacie BigDisk (500GB) which connects fine via USB or firewire directly to my Macs (HFS). When I plug it into the AirPort Extreme, the Airport Utility shows the disk as connected, and I've ticked File Sharing, with "Secure Shared Disks" set to "With base station password".
The AirPort Disk Utility is set to Automatically Discover AirPort disks and to Show AirPort Disks in the menu bar. It sees the Airport Extreme, and the action is set to "Connect with Password".
When I close the AirPort Disk Utility I can see the disk icon in the top menu bar, and clicking on this provides a menu with (greyed out) "No Disks Found", and the option to "Open Airport Disk Utility..."
Any ideas - it's driving me mad!
Thanks
Andrew

I am having the same problem with a Lacie 320 GB HD as well with my AEBS. I can't get it to stay recognized in Leopard. I have gotten it to work but only for 10 minutes then I have to unplug and start over. I know that it works fine in Tiger but I am having troubles with my drive "disappearing" with Leopard. From what I can tell others have had this problem but I am not finding a solution. Some have said going back to 7.1.1 works however my AEBS is 2 months old and the oldest firmware it has in the airport utility is 7.2. I have also found old versions on the apple website most look for an intel chipset which I do not have I am running a powerbook G4, also my friend on a new MacbookPro couldn't get them to work at all. Air disk is an amazing concept when am I going to be able to use it?

Best connection with U-verse Gateway and AirPort Extreme

These past couple of weeks I've been having problems where my AirPort Extreme (connected to my U-verse Gateway) has been randomly rebooting. I had Apple exchange the entire unit along with power cables and AT&T has already switched out the Gateway and it was STILL rebooting. I finally reset both to factory settings and started fresh. I turned off the Wireless on the U-verse Gateway and the Extreme is in Bridge Mode. That is how its always been and luckily fixed the rebooting. I am now having issues with my devices losing connection. For example, on my iPad Air, it'll show it is connected to my Network, but going onto Safari and trying to load a page gives me the "Server Not Responding" error. Issues also happen on not only Apple devices, but on a Wii U where I get connection errors. I HAVE NOT had these problems on my iMac (which is wireless), just on these other devices. I have not messed around with DMZ Plus Mode or changed any settings on the Gateway other than turning off the Wireless. I think it might have something to do with IP Addresses or something, but I am really not sure. If you have this same set-up, are you having these issues or what settings do I need to change? Thank you!
U-verse Gateway Model: 3801 HGV
AirPort Extreme 5th Generation

Ok so I began by reseting both devices and that fixed the majority of the "Server Not Responding" errors. BUT now I'm getting the problem where the AirPort Extreme randomly reboots. Like all of a sudden, all my devices will be disconnected from WiFi. When I go to the router, the Amber light is blinking then goes back to green. This was the issue from the very beginning and it really is very annoying. Can anyone help? If not, I'll try to contact AppleCare and post their solution in case somebody else is having these issues.

Problems with Comcast (Motorola) modem and Airport Extreme

I have a very strange problem which I have been unable to solve, nor able to find a solution on Apple Support or anywhere else by Googling it.
I switched back to Comcast/Xfinity, hooked up the Motorola surfboard SB5120 modem:
My primary Macbook Pro connects to the Internet, but (and this is bizarre!) the AirPort Extreme is flashing yellow with the errors listed as a) no Internet conncetion, and b) no DNS server
All other Wi-Fi devices are *unable* to connect to the Internet; they are connecting to the home network, but nothing else.
I did a "hard" reset of the AE, and setup the home network from scratch, same problems: one Macbook connects, nothing else does.
I have power cycled everything multiple times (even unplugging EVERY cable for 30 minutes, then reconnecting), spent the better part of 6 hours trying tor resolve this.
Any other settings to change?
In AirPort Utility colors:
Green for Internet
Flashing Yellow for AirPort Extreme (errors: a) no Internet conncetion, and b) no DNS server)
Green for AirPort Express
sub-menus:
1) Internet, set to "DHCP", nothing listed for IP Address; the Subnet Mask and Router Address have assigned numberes; the last three windows are empty.
2) Wireless, set to "WPA2 Personal"
3) Network, set to "Off (Bridge Mode)
Any solutions would be most welcomed - the idiot at Comcast was insultingly unhelpful. He said that since I was able to successfully connect to the Internet, and that the modem was successfully pinging back to Comcast, that the problem was with the AirPort Extreme.

Many thanks for your reply. I think number 3) below gets to the crux:
1) The MBP is on my network, for sure, not a neighbor's. I'm doing all of this wirelessly, though tested the modem via Ethernet to make sure the modem was working.
2) I reverted to the Verizon DSL modem, it did a handshake with the AE, and all the computers were successfully connected in seconds.
3) Network set to "Off (Bridge Mode)" is how all the computers are successfully connecting via Verizon, so what am I doing wrong when using Comcast? If I set it to "DHCP and NAT" or "DHCP only" I would have to enter a range of DHCP addresses (Comcast's *might* be 192.168.100.1, but not entirely sure (any help on that - might solve the problem?)
Extreme/Express - that was a mistake. I'm solely using an Extreme for this setup, though I also have an Express, I've temporarily taken it out of the network to try to resolve the issues.
Thanks again!

HT4260 I am working with a later version of Airport Extreme's using Mountain Lion. Are these instructions suitable?

I am trying to setup an extended wireless network using 2 Airport Extremes (4th and 5th generation). I have ethernet around the house. I have my wireless network setup but cannot add the second AE. My broadbanc connection is via cable modem.
Any help would really be appreciated!
Thanks
Barbara

Hello Barbara,
Things are very different now with the new version of AirPort Utility in Mountain Lion. Apple says that no instructions are really needed, since the setup is now much simpler than in the past.
Still, most users need a few hints to get going, and it's always good to check your connections first, to verify that the Ethernet "backbone" is working correctly before trying to add a second AirPort.
I understand that you already have one AirPort Exteme set up and working, which we will call AE 1.
Connect an Ethernet cable from one of the LAN <-> ports on AE1 to your Ethernet connection for the house....probably a wall jack.
Temporarily, move your MacBook Pro to the location where you want to install AE2. Turn off the wireless on the MacBook Pro (by clicking the fan shaped AirPort icon at the top of the screen). Connect an Ethernet cable from the Ethernet wall port to the MacBook Pro, and check to see if you can get a good Internet connection with the MacBook Pro connected this way as a test.
If you can, then you know that the Ethernet wiring is functioning correctly. You can disconnect the Ethernet cable from the MacBook Pro now, and turn the wireless back on.
If you cannot get an Internet connection with the "test", then you'll need to do some additional troubleshooting before you can connect AE 2.
Post back on your results, and we will continue with the setup of AE 2.
I assume that AE 2 is new, and that you have not made any changes to this device, or tried to configure it yet.

Only 10 results from spotlight with Vantec NexStar MX on AirPort Extreme

Similar Messages

Maybe you are looking for