Only able to access MBAM Helpdesk site using FQDN

I have an SCCM integrated MBAM setup using MBAM 2.5 on a Server 2012 R2 box. Everything is working fine except I have to use the FQDN in the URL to get to the Helpdesk site. The SPNs and delegation were set up for both FQ and host name. What staggeringly
obvious thing have I missed?

I only get the error using the host name, it worked fine when I was using the FQDN.
The SPNs were set to the service account for the app pool and both the Host name and FQDN were set and are listing properly when I just checked with SetSPN -L
Just to let you know, if you don't hear back from me over the next week, it's because I'm going on leave at the end of today, but I'll be checking back once I'm back in the office. Thanks for the help so far.

Similar Messages

TS4036 My iPhone5 was replaced today and when I did a restore I was only able to access a previous backup to the backup that I did yesterday? Hence, I do not have access to some apps such as ebooks and games. Can you help resolve this issue?

My iPhone5 was replaced today and when I did a restore I was only able to access a previous backup to the backup that I did yesterday? Hence, I do not have access to some apps such as ebooks and games. Can you help resolve this issue?

My girlfriend had a similar issue because her new device was not updated to IOS7 when she turned it on, but her backup point was created using IOS7. Check to be sure the restore point was created and then factory reset the phone after you have updated to 7.

I'm modifying someone else's website for the first time (noob = yes). I only have ftp access to the site server. Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

Great, first post, sorry for the title. But to repeat it:
I'm modifying someone else's website for the first time (noob = yes). I only have ftp access to the site server. Before uploading changes, is there a easy/quick/recommended/etc way to make a copy of the files I'm about to replace?

You can use the Dreamweaver FTP (or a different FTP client) to completely copy the original website to your development computer, then, before making changes, you can copy the whole thing to a directory called something like "website original"
If you want to run both the old and new sites on the remote server, this is often possible. Add a folder/directory to the server and call it something like "new" and upload the new files there until you are ready to replace the old site
All of this you can do with FTP

Not able to access secure web sites

I have a satelite modem that connects via WAN port to my Airport Extreme which then is connected via LAN port to Netgear ethernet card on my PC. After just getting the broadband last week, I noticed that I cannot access certain secure sites such as my bank or american express site on my PC but I can do it via wireless from my PowerBook G4. When I bypass the Airport extreme and connect the modem directly to the PC ethernet card, I can then acess the secure sites on my PC.
Can some please help to solve this so that I can acess the secure sites on my PC as well when using the Airport Extreme?
After taking to tech supprot at the Hughes.net they say that the router is somehow blocking the sites into the PC- something about a MTU or something like that?
Thanks for your help
Faltu1

Thanks Duane for your prompt reply.
My knowlede of computers in very shameful. I am not aware of any software on the PC that has the wireless port more restricted. All I have is the AVG free Anit-virus and the Free Microsoft Fire Wall installed.
If it is a software blocking the ports; how can find out which one it is and what can be done to fix it.
Are there some settings on the AEBS that can be adjusted for it to communicate better with the PC to all the sites to pass through.
I did find some thing on the appple web site about restricted website but I don't understand what it means and wether it really applies to my situation. See below:
Restricted address ranges
Using AirPort Admin Utility or AirPort Utility, check the "Public" or "WAN" IP address. If this address starts with a "10" or "192", your ISP is using restricted address ranges. This may affect the ability of the base station to share the Internet connection among computers. If you have difficulty connecting to some websites when the base station has a public IP address beginning with 10 or 192, use AirPort Admin Utility or AirPort Utility to turn off connection sharing for the base station. Only one computer will be able to connect through the base station. If you have a broadband modem, you may need to unplug its power supply for a few seconds to reset it. If that resolves your issue, contact your Internet service provider. In this configuration the base station is serving as a wireless bridge between your computer and the ISP, rather than as a wireless router. To connect more than one computer, your ISP would need to assign additional IP addresses to your account.
Thanks for your help again.

TS1559 Having problems logging into my email despite my wifi is working. Only able to access my mail from my desktop and not from my iPad, iPod. Error message is my username or password is incorrect. Need assistance to resolve this problem

Cannot get my emails despite logging in with my correct username and password

Hello, Valeriemitchell.
Thank you for the question. Since you are able to access your email account on other device, this issue could be related to a security feature offered by your email host. Without knowing which email host you use, I will include the best resources that I can. Below, I have included two e-mail troubleshooting articles. The first article covers basic email troubleshooting. The second article will assist you if the email account you are experiencing issues with is a Gmail account.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
iOS: Gmail account will not connect to Gmail server
http://support.apple.com/kb/TS3058
Hope this helps,
Jason H.

I'm only able to access the last 2 pages of these FH threads

Is there a way to see older threads on this forum? It seems
all I have access to is the first 2 pages of threads. Is that the
same for everyone and, if so, was that implemented recently?

I don't know about you Judy, but in my newsreader
(Thunderbird) the
older posts are not available. It appears there is a setting
to keep
messages for offline use. I believe if I turned this on then
I would be
essentially fully downloading and storing all messages until
I deleted
them. I'm not sure this is worth it to me since I can go back
and use
Google for old searches.
Rich
Judy Arndt wrote:
>>Use Google Groups: macromedia.freehand
>
>
> You can also access this group by using newsreader
software. This will allow
> you to see which messages you have already read, and
allow you to sort by
> topic, date, author, etc.
>
> Set up a news account for
> forums.macromedia.com
>
> Then download the group headers and subscribe to
> macromedia.freehand
>
> Judy Arndt
>

Not able to access Microsoft web sites

Hi!
We cannot only access Microsoft Websites through ISA 2006 on web proxy clients and even on ISA itself. We disabled all the rules but still cannot access. ISA server cannot access Microsoft websites even if we use direct connection to internet without using
proxy.
Any Suggestions?
Thanks.

Hi,
In addition, have you received any error messages? Firstly, I recommend you to ping the website or nsloookup the website?
Please make sure that those websites are not added
in restricted sites on your browser or you can change a browser to see if the issue persists.
Best regards,
Susie

TS1424 When I ave network coverage, my wi if drops out. I am only able to access my music on my phone when I have no network signal, otherwise all songs are greyed out

I can only access my wi if, when I have no network signal. As soon as I move to a better signal area, my wi Di connection drops out.
I have music on my phone, but again, I cannot access this in the gym, when I have a network signal.
I also cannot access some of my apps, as they are greyed out. Please advise

Grey text when you look at the content and a lock symbol at the bottom of the screen just indicates that the iPod is set to sync automatically with iTunes. If you want to connect an iPod to multiple computers, play the iPod songs through iTunes, delete songs from the iPod, drag songs from iTunes, add playlists to the iPod etc. you need to change the update setting to "manually manage songs and videos". The text will change from grey to black and everything will be directly accessible through iTunes:
Managing content manually on iPod
Using iPod with Multiple computers
Syncing Music to iPod
Something to remember about using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

Only able to access wireless network through system diagnostics

I have a Macbook (white, early 2008). Wherever I go my Airpot works fine at connecting, but at home, whenever I try connecting to the wireless network normally (clicking the airport tab, choosing network, etc.), I enter the password, which I know 100% is correct, and it always gives me timeout error or some other load of fertilizer that never fails to frustrate me. The only way I have found to access (more like force) connection is to go through system diagnostics, where if I change the security type (which you can't through the airport tab) to WPA 40/128-bit hex. Then, entering the numerical password, I can finally access the network and the notification "Your setting's have been changed. Click OK to continue" sometimes appears. I move my computer around and have to switch locations (one of which requires a proxy; could this be a cause?) to access different networks.
My question is: Is there any way to fix this and allow automatic connection to the network?

actually as a matter of fact I did manage to fix this issue. I have absolutely no clue how it worked and I don't know if it will work for you but it's worth a shot
Make sure you're connected to the internet.
System Preferences > Network > Location
Under the drop menu, go to "Edit Locations"
There create a new location. You can call it whatever.
When you create this location, you should still be connected to this network when you switch from location to location, provided their settings are the same.
Now, whenever I'm using my first Home location (the default I think), I still can't access it automatically. But with the Home 2 (the second location I made), it now automatically connects. Strange. It might work for you but I have no clue how this actually worked.

What do i need on my mac pro to be able to access navy military sites???

im having a very difficult time with accessing military sites on my macbook pro i have been able to gain access to majority of the sites but not all most important site at the moment is Nrows on the navy reserve site.

Some of these sites require special client certificates. You may need to speak to your commanding officer.

HT201359 Suddenly for the past 3 months ,I am unable to buy anything through my visa credit card in iTunes store as well as in google play store, all the transactions are getting declined.But Iam able to buy in other sites using the same credit card. Pls

For the past 3 months I am unable to buy anything in I tune store as well as google play store using visa credit card.
It is getting declined in these stores only.
In all other online stores I am able to buy with the same credit card for eg. in e bay
Guide me.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

HT1695 New iPhone 5 -only able to get wifi when sitting next to router. My old 3GS with iOS 5.1 works fine all over house. Any ideas on how I can get my new iPhone 5 to work as well as old 3GS?

I just got my new iPhone 5 yesterday. I'm having difficulty maintaining a wifi connection. I can get reception when I'm sitting next to router but I get a short distance away and I get the message 'unable to connect to network'. My old iPhone 3GS works fine at same places where new iPhone 5 won't connect. I still am using ios 5.1 on 3GS. I've turned off my old phone to make sure it isn't causing some type of interference and also switched off the cellular network to try to force it into wifi mode but without any success. I don't think it's my router since my old 3GS is working fine. Anybody have any further thoughts? Thanks

There are some low-profile slots though 1 of them are occupied by the firewire card: 1 low-profile PCI, 2 low-profile PCI Express x16, 1 low-profile PCI Express x1
We actually purchased 13 of these computers for video editing, so I really hope it is possible to fix this without buying 13 low-profile graphics adapters. What gets to me is the fact that it does work when I disable the driver. (!) Shold therefore be doable to make a driver/update that works :-(
Any ideas? Or, in worst case, anyone know about a low-profile graphics card that works?
Thanks,
Steffen

How to get list of users who all are having full access in sharepoint site using client object model c#

Hi,
I want to fetch the list of users who all are having full access to the sharepoint list using client object model with .Net
Please let me know if any property for the user object or any other way to get it.
Thanks in advance.

Here you are complete code i created from some years it lists all groups and users, you can just add a check in the permissions loop to see if it is equal to Full Control.
Private void GetData(object obj)
MyArgs args = obj as MyArgs;
try
if (args == null)
return; // called without parameters or invalid type
using (ClientContext clientContext = new ClientContext(args.URL))
// clientContext.AuthenticationMode = ClientAuthenticationMode.;
NetworkCredential credentials = new NetworkCredential(args.UserName, args.Password, args.Domain);
clientContext.Credentials = credentials;
RoleAssignmentCollection roles = clientContext.Web.RoleAssignments;
ListViewItem lvi;
ListViewItem.ListViewSubItem lvsi;
ListViewItem lvigroup;
ListViewItem.ListViewSubItem lvsigroup;
clientContext.Load(roles);
clientContext.ExecuteQuery();
foreach (RoleAssignment orole in roles)
clientContext.Load(orole.Member);
clientContext.ExecuteQuery();
//name
//MessageBox.Show(orole.Member.LoginName);
lvi = new ListViewItem();
lvi.Text = orole.Member.LoginName;
lvsi = new ListViewItem.ListViewSubItem();
lvsi.Text = orole.Member.PrincipalType.ToString();
lvi.SubItems.Add(lvsi);
//get the type group or user
// MessageBox.Show(orole.Member.PrincipalType.ToString());
if (orole.Member.PrincipalType.ToString() == "SharePointGroup")
lvigroup = new ListViewItem();
lvigroup.Text = orole.Member.LoginName;
// args.GroupsList.Items.Add(lvigroup);
DoUpdate1(lvigroup);
Group group = clientContext.Web.SiteGroups.GetById(orole.Member.Id);
UserCollection collUser = group.Users;
clientContext.Load(collUser);
clientContext.ExecuteQuery();
foreach (User oUser in collUser)
lvigroup = new ListViewItem();
lvigroup.Text = "";
lvsigroup = new ListViewItem.ListViewSubItem();
lvsigroup.Text = oUser.LoginName;
lvigroup.SubItems.Add(lvsigroup);
//args.GroupsList.Items.Add(lvigroup);
DoUpdate1(lvigroup);
// MessageBox.Show(oUser.LoginName);
RoleDefinitionBindingCollection roleDefsbindings = null;
roleDefsbindings = orole.RoleDefinitionBindings;
clientContext.Load(roleDefsbindings);
clientContext.ExecuteQuery();
//permission level
lvsi = new ListViewItem.ListViewSubItem();
string permissionsstr = string.Empty;
for (int i = 0; i < roleDefsbindings.Count; i++)
if (i == roleDefsbindings.Count - 1)
permissionsstr = permissionsstr += roleDefsbindings[i].Name;
else
permissionsstr = permissionsstr += roleDefsbindings[i].Name + ", ";
lvsi.Text = permissionsstr;
lvi.SubItems.Add(lvsi);
// args.PermissionsList.Items.Add(lvi);
DoUpdate2(lvi);
catch (Exception ex)
MessageBox.Show(ex.Message);
finally
DoUpdate3();
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation

Cannot close tabs in Firefox 4 - only able to access 1st and last tab...nothing in between

As the title says... even if I hover over tabes between 1st and last tabes adn right click, 'close tab' still doesn't close

nearly. when there are 2 tabs, when I move mouse over the second tab's closing X, OR the new tab opener + near it, it doesn't highlight so I cannot click on them although the area where I can click can be found a bit left for the X and a bit right for the +. If there are more tabs open, only the second tab's closing problem stays, the new-tab-opener's goes. /default theme/

Have purchased Creative Cloud but only able to access trial version - help!

My IT department has purchased Creative Cloud for myself and a colleague. I have received an invitation by email which states that I've been assigned a Creative Cloud - Complete Membership.
I followed the links to download and installed Photoshop initially. However, once downloaded it says that it's a trial version.
When I log in to my Adobe account and click on 'Manage Account' it says that I have Creative Cloud for Teams so really don't understand why I only have a trial version.
Can anyone help???

Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

Only able to access MBAM Helpdesk site using FQDN

Similar Messages

Maybe you are looking for