Only Able To Add 4 Files At A Time?! =(

Is it just me, or does iTunes not let you upload anymore than four files at a time??? I tried to put an album on, and nothing got uploaded. I had to add four songs at a time, which was a real pain. Same goes for my videos.
Is this a glitch in iTunes, or just another really stupid "feature"?

i went back down to 6.0.3 and it said that my itunes library file was for the NEWER iTunes...i dont want to lose my stuff on iTunes, so i guess i'm stuck with 7.
I will try to downgrade to 7.0.0 right now.
Gimme a couple mins.
Thanks!

Similar Messages

Only Able To Add One File At A Time From Mapped SharePoint (2013) Drive to Outlook (2010) E-mail

I am using SharePoint 2013. I have mapped several network drives. When adding files off SharePoint to an Outlook email, I can only add one file at a time. I can add multiple files IF they are not on SharePoint (e.g., stored locally, or on Dropbox); Previously,
when using SharePoint 2010, I was able to upload multiple files.
ANy advice?
Thanks.

Hi,
There are two methods to add multiple files from SharePoint library to outlook emails:
Sync SharePoint library to outlook via “Connect to Outlook”, then you will find SharePoint Lists in outlook. Locate the library folder, you could select multiple items and drag them to an email.
Open SharePoint library via “Open with Explorer”, then you could selected multiple files and drag them to an email.
Regards,
Rebecca Tu
TechNet Community Support

I am not able to add video files to my itunes after installing itunes 10.7

I am not able to add video files to my itunes after installing itunes 10.7.0.21

I Have been using, Ipad for only around a month or so (Ipad 2), and it was only yesterday that i tried to use the Itunes. I first downloaded the latest itunes (10.7.0.21), and took backup of all my Ipad data.
After this, I wanted to add some video to my ipad, as it was essential to add the same to My itunes first, I roceeded to do just that. I went through this command {File - Add File to Library}, and then went on to select the Video file. There's just a flicker, and then nothing happens at all - the itune screen remains, and there is no error message too. Whereas, I can easily add Audio Files.
After this, I even downaload the latest Quick time (7.7.2), as I had read somewhere that the same is necessary. When I tried to open the Video file in Quick time, it did not open. After that I downloaded the codec DivX and DivX player. Though the Video plays in DivX, it refuses to open in Itune and does not play properly in Quicktime (slider moves, but sound and video is not there).
Frankly, I am utterly confused.
Regards, Shekhar

Not able to add music files to mobile

I am not able to add music files to mobile. While trying to add it is not showing any message and the file is not geting added to itunes library

Follow this link carefully.
https://discussions.apple.com/docs/DOC-3141

Im no longer able to add video files to itunes library. how can i correct this?

I am no longer able to add video files to my itunes library. how can i correct this please?
many thanks

Drag the folder into the library in the open iTunes program window.
(113784)

Ssd died with wife's data on it only able to salvage ,mdf file - Save a man's life ... how do I restore / attach / recreate log file - no permissions on new drive

         My wife asked me if I could create a VB program for her - load her data onto SQL Server to test her for some medical exams. Since I have been "playing" with both Visual Studio and SQL for over 10
years, I said sure. Copied her Excel file, transferred the data to SQL and started "playing".
       Play time ended abruptly the other day when my Solid State Drive died. I was only able to salvage the .MDF off the disk. Lost the log file and lost the Excel file. Yes, for all of my databases I had regularly scheduled
backups to another disk. I hadn't set that up for hers yet, thinking that the data was available on another computer altogether.
       No big deal, right? Just get the original Excel file back from the wife("Offsite backup") and reload the data from Excel. Problem ... she deleted the file 2 months ago thinking I had the data, and there is no
recovery as the sectors where that data was located on her hard disk have since been overwritten.
      As to my situation: I told here that things were "going fine" and that I just had a couple more things to recover and we would be back up in business. Thinking that Dangling from a bar over a tank of great whites
with a freshly cut hand might be preferable to telling her that I just fried over 300 hours of her hard to come by, time, by assuming the data was safe.
       From what I can tell, the .MDF file is intact. I have nothing else, and that was attached to a database on what was essentially another computer. Yes, I "Assumed" I had good backups. Yes, I have learned my lesson.
Please save a man's life and help me out.

                   I had my disk die with the only copy of my wife’s medical “Question and Answer”
(Q_And_A) database on it. She thought it was safe and sound on my computer, and I thought we had an “Off site” backup of the data on hers and hadn’t set up backup for it.
1.)
The bad things are, only the .mdf file was intact.
2.)
All of the permissions based on the old copy of Windows 7 and SQL 2005 or 2008 ( I am not sure which the .mdf was created in.) have gone the way of the dodo.
       Bought a new disk. Reloaded windows 7 64 bit. Loaded SQL 2014 (Thought now was a good time to upgrade.) Problem
… so far I have not been able to attach and recreate the log file …
          Just to finish up the data I have, the database was closed properly and is NOT in a read
only state according to file properties. That said, I still don’t have a solution.
So far I tried these three sets of commands:
CREATE DATABASE
Q_And_A
ON
(FILENAME
=
N'E:\Mikes 128GB\SQL2014\MSSQL12.SQL2014\MSSQL\DATA\Q_And_A.mdf')
FOR
ATTACH_REBUILD_LOG
GO
And this set of commands:
CREATE DATABASE
Q_And_A
ON
FILENAME
=
N'E:\Mikes 128GB\SQL2014\MSSQL12.SQL2014\MSSQL\DATA\Q_And_A.mdf')
FOR
ATTACH
GO
EXEC
sp_attach_single_file_db
@dbname='Q_And_A', @physname=N'E:\Mikes 128GB\SQL2014\MSSQL12.SQL2014\MSSQL\DATA\Q_And_A.mdf'
GO
         So far this is the computer’s reply to everything I have thrown at it. I haven’t told my wife that 600 hours
of her work is inaccessible, and I would really rather not do so. Anything anyone can offer would be great.
File activation failure. The physical file name "E:\Mikes 128GB\SQL2014\MSSQL12.SQL2014\MSSQL\DATA\Q_And_A_log.ldf" may be incorrect.
The log cannot be rebuilt because there were open transactions/users when the database was shutdown, no checkpoint occurred to the database, or the database
was read-only. This error could occur if the transaction log file was manually deleted or lost due to a hardware or environment failure.
Msg 1813, Level 16, State 2, Line 1
Could not open new database 'Q_And_A'. CREATE DATABASE is aborted.
          Is there anything else anyone out there can offer as help? My wife has often said that
she doesn’t believe in divorce. But murder she will consider. If she loses 600 hours of her data this could be my last post. I am joking … I think … That said, any help is extremely welcome. Thanks in advance.

HT1473 i am not able to add mp4 file to itune.What may be the issue.While adding mp4 file i am not getting any error message from itune.Please help.

I am not able to add mp4 or mov files to my itune.itune is also not throwing any error message,I am bit confused.Which formats of video file can be added to itunes??I have itunes of 11.0.2.26 version and iphone 4s-6.1.3 version.

I am not able to add mp4 or mov files to my itune.itune is also not throwing any error message,I am bit confused.Which formats of video file can be added to itunes??I have itunes of 11.0.2.26 version and iphone 4s-6.1.3 version.

I am not able to add mp4 files to itunes library

None of the answers provided is the correct one.
The correct one is: reinstall quicktime and it will work

I Have been using, Ipad for only around a month or so (Ipad 2), and it was only yesterday that i tried to use the Itunes. I first downloaded the latest itunes (10.7.0.21), and took backup of all my Ipad data.
After this, I wanted to add some video to my ipad, as it was essential to add the same to My itunes first, I roceeded to do just that. I went through this command {File - Add File to Library}, and then went on to select the Video file. There's just a flicker, and then nothing happens at all - the itune screen remains, and there is no error message too. Whereas, I can easily add Audio Files.
After this, I even downaload the latest Quick time (7.7.2), as I had read somewhere that the same is necessary. When I tried to open the Video file in Quick time, it did not open. After that I downloaded the codec DivX and DivX player. Though the Video plays in DivX, it refuses to open in Itune and does not play properly in Quicktime (slider moves, but sound and video is not there).
Frankly, I am utterly confused.
Regards, Shekhar

I get this message "The operation can't be completed because an unexpected error occurred (error code -50)" when I try and add any files to my Time Capsule

I get this message "The operation can’t be completed because an unexpected error occurred (error code -50)" when I try and add or delete any files to my Time Capsule. It just started happening a week ago.

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Having problem after I add a file to the time capsel

i'm currently using my time capsel as a externa; hardrive only. I just updaded to snow lepard also. Here is the problem that i'm having, when i add a file initialy to the time capsule it does not let me open is to view it. The only things that i add are avi files, i have to play around with the file doing stuf like open with or resrting my computer and go back into the time capsule and them i can view the file. the error that i get is something like "item is being used the mac OS X and it can't be opened. Any help on this would be great.

The Acrobat XI Family uploads to files.acrobat.com which is totally separate from the Creative Cloud storage area. Even though you can use the same AdobeID to access each service, files are not shared between them.
There is currently no way to access your Creative Cloud storage area from within the Acrobat XI Family.

1st Gen iPod Nano Will Only Let Me Add One Song At A Time!

Hi. I've got a 1st Gen Nano that has worked fine until recently. Last night, I decided that I wanted to reorganize my library and cleared all the songs off my iPod. I normally maintain my library manually, and have more songs than I do space (I have 4GB), so I wanted to pick and choose the songs I put back on.
I highlighted multiple songs and dragged them over to my iPod, but after three or four, they suddenly stopped transferring. I tried this over and over but the same thing kept happening. Then I tried to automatically sync it just to see what happened and, again, after just a few songs, it simply stopped. (Note that it never froze up or anything.) I shut down, rebooted my laptop and tried yet again -- same thing. I even restored my iPod to factory settings and THAT didn't help.
Apparently, I can only add songs one at a time now -- and I don't get why. I'm wondering if it could be the USB cord? I feel like that could be the issue, yet I wonder if a damaged USB cord would allow any transfers at all...
Any ideas? Thanks in advance...
-Heather

Welcome to Apple Discussions!
Try a reset...
http://docs.info.apple.com/article.html?artnum=61705
Also, does it work right in iTunes? Are all the songs checked?
Merry Christmas
btabz

Hyper-V Only able to run one VM at a time

Hi all,
I have Hyper-V set up with about 3 VM's on Server 2012, but i can only seem to run one VM at a time.
The server has the following:
32GB Ram
1TB HD with 425GB free
When i have one of them started and running, it works just fine.
As soon as i try to run a 2nd VM, i get the following error:
"'PC1' failed to start.
Microsoft Synthetic Mouse (Instance ID 58F75A6D-D949-4320-99E1-A2a2576D581c): Failed to Power on with Error 'The name limit for the local computer network adapter card was exceeded."
I have tried to do the following:
Disable all networking on each guest VM
Removed DVD Drive
Increase MAC range
Set static MAC
Changed boot order to put the CD to the bottom
Disable the integration services from each VM
Each VM has different netBIOS name
Each VM has a different VHD and OS
When starting the 2nd VM, it gets to about 10% and then shows the above error message.
Is there anything anyone can suggest?
Thanks

Hi Skaliam,
What is your VM's OS ？
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Making us able to add LOCAL FILES to the new "Your Music"

First of, I'm a huge fan of the new layout.
But as the title says I'd like to add my own beloved local files to the "Your Music". I don't see why this shouldn't be a possibilty. This way I don't need to have one master playlist, I can just have all the music I like under "Your Music -> Songs".
Also, as suggested earlier, changing the font size could be usable to many people.

Simply put: give us a totally seamless integration of local files and subscribed albums/songs in "your music" or whichever name you choose ... Call it "the bucket" and I don't care, I'm here for the functionality, not the marketing.
I mean: ONE container, with all items displayed (album covers and so on), searchable and playable exactly the same way.
I'm a long time music passionate, and I have a personal collection of hundreds of CDs, which majority is unavailable on spotify. So ATM I'm using iTunes (and iPhone Music app) to listen to my ripped own stuff, and spotify for all the rest. Sounds like a no-brainer to anyone? It's not impossible, iTunes does that exceptionally well.
This is THE ONLY aspect that actually prevents me from subscribing.

Only able to add two photo overlays to my movie

I have move that I'm adding still images over the video in various times. It's easy enough, Just drag the photo from the photo browser onto the clip and then it appears on top of the image.
I have added two still photo's to my movie so far, but when I add more still pictures, they appear above the movie strip, but it doesn't 'overlay' on playback.
I hope I'm making sense.
Any idea?
Thanks in advance.

So I tried another project, and I got upto 4 picture overlays untill iMovie would not 'overlay' any more that I added.
I'm off to Final Cut Express...and i move was so easy and enjoyable until this happened

Only Able to Wirelessly Sync Palm Centro One-Time Before Needing to Reboot My PC to Sync Again

I'm using a Bluetooth dongle to sync between a Palm Centro and my PC, which uses the Windows Vista 64-bit and Outlook 2007. After an unbelievable four hours on the phone with Palm support, I was able to synchronize wirelessly because that was the only option available.
All synchronizations have been problem free for at least four months and then for reasons that escape me, I can only successfully sync once, without having to reboot my PC. It seems that each reboot is good for one sync. When I try to sync more than once, I get the following error message on my Centro:
"Unable to initiate hot sync operation because the port is in use by another application."
I am probably going to be upgrading to Windows 7 over the next month or two and am a bit concerned with the problems I've seen from people who've gone from Vista to Windows 7, who did not have any problems under Vista. The only reason I mention this is because of whatever solution that is suggested, hopefully it will also work under Windows 7.
It is great to have a community that helps with Palm. Thank you very much.
Post relates to: Centro (Verizon)

The Bluetooth work around as worked for most customers and does not for some. This is for both Vista 64 and Windows 7 64. With your case it sounds like the Bluetooth partnership needs to be renewed. To do that delete both partnerships from the device and then re-add them. If you need more information on this please look at this thread: http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=53678

Only Able To Add *4* Files At A Time?! =(

Similar Messages

Maybe you are looking for

Only Able To Add 4 Files At A Time?! =(