Only able to do one line of text  when creating a paragraph?

Can only do one line of text. The carriage return/Enter key does not create a new line when building a paragraph? The cursor goes to the beginning or middle depending on how the justification is set.

There are two things going on here. First, your leading, the distance between the lines, should be set to Auto or adjusted to the size you want. Second, if you click and drag out a text area before you type AE will automatically wrap the text to fill the area just as it does in Photoshop.
I would start by clicking the little icon at the top right corner of the Character palette and then select Reset Character at the bottom of the list.

Similar Messages

  • How do I create 2 motion tweens for one line of text?  the text needs to "fly-in-right", I can do that,

    how do I create 2 motion tweens for one line of text?  the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

    my question
    1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
    2- how can create manual process to fetch row into specific items in page ( i tray these code
    SELECT col1, col2, col3 ....
    INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
    FROM table
    WHERE id = :P_id ) but no data retrieve .
    I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
    ORA-01403: no data found : Unable to fetch row multiple automated row fetch
    On your second question, the manual process should work provided:
    P_ID has a value when the process executes. You can do it this way:
    i. Make this process as a on-load After/Before header process
    ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

  • Display more than one line of text for events?

    I couldn't find this in the forum... I just recently updated to Leopard. Now when I put events in iCal, it only displays one line of text in the month calendar view. I'd really like to see the whole description of the event, even if it's two or three lines. I can't find anything in preferences that addresses this, and various searches are not yielding anything. Help?
    -mel

    Hi there.
    Usually in iCal if you want more than one line of text for timed events, resizing the window will help. Under all-day events, iCal will always show you one line of text, but if there is more space it will show you more text. So, also resizing the window for this will help to see the text.
    Take care.

  • Only able to confirm one PO line item at a time

    In SRM 7.0 (Ext Classic) it seems that you can only select one PO line item at a time to confirm.  I am doing this in the portal, highligting the lines, clicking create with reference and then confirmation.  Then I get an error that says only select one line.
    I don't understand why SAP would not let you confirm more than one PO line item at the same time, you can do it in SRM 3.0.
    Please advise.
    Thanks,
    Matt

    It will actually bring in both lines eventhough you don't select them both in the portal.  However, it does seem that you can't confirm a limit and a standard line at the same time.

  • SINCE YOUR LATEST UPDATE, I AM NOW ONLY ABLE TO OPEN ONE FIREFOX WINDOW AT A TIME, I ALSO LOST MY YAHOO SEARCH BAR TOOL.

    I have had Firefox for a few years and have been very satisfied with all of it's features and qualities. I work a great deal from home and have always enjoyed the convenience of being able to work off of 3 or 4 Firefox screens at one time. By pulling up one screen over the other and then go back and forth (as I still am able to do with Internet Explorer), saves a lot of time and NEEDLESS effort.
    Since your latest update the other day, I am now only able to get that 1 screen and no matter how many times I click on the Firefox Icon on my icon screen, no other Firefox screens will come up. I am stuck with that 1 screen...
    PLEASE HELP!!!! I have also lost my Yahoo search tool bar due to your upgrade, as well as several others which I cannot seem to retrieve.
    Thank you so Very much in advance for addressing and correcting this error.

    Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
    After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
    Is there a way to downgrade back to v 18.0.2 until this is fixed?

  • Hyper-V Only able to run one VM at a time

    Hi all,
    I have Hyper-V set up with about 3 VM's on Server 2012, but i can only seem to run one VM at a time.
    The server has the following:
    32GB Ram
    1TB HD with 425GB free
    When i have one of them started and running, it works just fine.
    As soon as i try to run a 2nd VM, i get the following error:
    "'PC1' failed to start.
    Microsoft Synthetic Mouse (Instance ID 58F75A6D-D949-4320-99E1-A2a2576D581c): Failed to Power on with Error 'The name limit for the local computer network adapter card was exceeded."
    I have tried to do the following:
    Disable all networking on each guest VM
    Removed DVD Drive
    Increase MAC range
    Set static MAC
    Changed boot order to put the CD to the bottom
    Disable the integration services from each VM
    Each VM has different netBIOS name
    Each VM has a different VHD and OS
    When starting the 2nd VM, it gets to about 10% and then shows the above error message.
    Is there anything anyone can suggest?
    Thanks

    Hi Skaliam,
    What is your VM's OS ？
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Deskjet 5525 printing random characters, one line per page when printing both sides of page

    Hi. I have a deskjet 5525 wireless all in one printer. 
    I have installed all of the necessary hardware and have updated it. We have two computers running windows 7, 64 bit. I have not been able to update the firmware on the printer because the HP Device Updater program that does it cannot communicate with the printer via usb cable or wireless on two different computers I have tried.
    When trying to print two sided documents, it will print ok for about two pages, but then, it will start printing on line per page of random characters, blurred lines of text, gargabe basically.
    This is the second printer as the vendor replace the first one with the same problem. You would say, oh a software problem, but I have reinstalled the HP Deskjet 5520 series SW a couple of times, reinstalled the printer, but the problem continues. 
    An old HP deskjet 3845 worked for us pretty well on the same computers.
    Please help.

    Hi Onemangosta,
    I would like to help with the garbled text you are experiencing. I have found a great document for you to use and I can also help you with the firmware update.
    Troubleshoot text that might be gibberish, nonsense, or look garbled or scrambled
    In order to update the firmware on your printer ensure the printer is on the wireless network and touch the Web Services icon (this icon is the 1st of the 4 that run across the top of the front panel - looks like 2 little cell phones). Scroll through the Web Services menu, find and select Product Updates, select Check for Product Updates.
    If the printer is already up to date the front panel will say so, if it is not, the download and install will begin. It is possible you were unable to do the update form the computer because the printer does not need an update. The HP Device Updater will only see a printer that requires the update.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • More than 1 line of text when using text generator from file?

    hi
    have 8 line blocks of text to show onscreen.
    would like to use text generatorn>from file
    all they seem to print is one line.
    is there a work around?
    have trhied soft returns and paragraphs on saved text file.
    no change.
    anyonre know how to get 2 or more lines of text?
    thanks in addvance!

    Select the File generator layer and in the Inspector, select the Layout pane and in Layout controls, set the Layout Method to Paragraph.  Narrow your margins and the text will "flow" into multiple lines.
    You can also keyframe the paragraph layout position. [Probably more info than you want here.]
    That said, you can only display *one line* at a time per File Generator. (If you're up to date with Motion [v5.1.2], you can use more than one File generator.) The generator does not accept any other characters for returns other than newline and carriage return.
    I've never tried it, but thinking about it, you can set Tab stops in the Paragraph layout (double click in the layout rectangle and a ruler should appear over the top -- right click on the ruler to set tabs). If you go back into the original text file and where you need to break lines into two or more, setting a left tab stop in the layout very near the end of a line might force the tabbed text into the next line (did I make that clear enough??)

  • How to clear the previous  filter text when creating new record??

    Dear All,
    my question is i i created table having filter and sorting.
    when i m searching data through filter text data is coming but i want to clear that text(filter text) when i am creating new record.
    for my case when i am creating new record all blank field is coming but in that filter text box previous data is coming which one i was searching.
    but i need when i will create a new record tat filter text should be clear.
    Thanks
    Damby

    Damby, please tell us your jdev version.
    Check my blog http://tompeez.wordpress.com/2011/10/29/jdev-how-to-reset-a-filter-on-an-aftable/ you can add this to the button you use to create the new record.
    Timo

  • Material description VS Purchase order Text when creating a PO

    Hi Gurus,
    When creating a PO for a specific material, I have to print a purchase order text different from the material description.
    To do this, a specific text has be added to the material master data in the tab "Purchase order Text" with the italian language maintained.
    But, when i start to create a new PO for this material, the short text that is shown is retrieved form the Material description and not from the Purchase order text that has been added before.
    How can I do to have the purchase order text shown in the PO instead of the common material description?
    Thanks in advance for your support.
    Regards,
    Valentino
    Edited by: Valentino Rosso on Sep 9, 2009 10:58 AM

    Hi Rajaram,
    thansk a lot for your answer, it has been very helpful.
    Could you please clarify me the below points?
    1) Could you please confirm me that this is the functionality of the standard SAP System? That means that in case we want to put the purchase order text in to "short text" we would need to create an ad hoc development, right?
    2) In case we print the PO with the purchase order text added for the material, is there any point where we can find this information for the material, or we will see just the material description from the Material Master Data?
    Thanks a lot for your support.
    Regards,
    Roberto

  • How to get text when creating invoice

    Hi Experts,
    As standard system behavior, when creating invoice the item description is retrieved from material description in master data.  Now we want to use sales text in material master for invoice item description, can we do this?
    Thank you in advance.
    Richard

    hi richard
    yes this is possible.
    you will have to pass this parameters under function module called READ_TEXT for desired output.
    NAME = MVKE-MATNR & MVKE-VKORG & MVKE-VTWEG - to read for which sales orgn/distribution channel/division you have to pass the value.
    LANGUAGE = 'EN' - in which language you have to pass the same.
    ID = 0001
    OBJECT = MVKE - table
    if both are there
    material description and material sales text then
    you have to write a condition there.
    regards
    balajia

  • Change PR item short text when created from Work Order

    Hello,
    Is there a way to edit the PR item short text when the PR is generated from a Work Order. When we open the PR, the item short text is grayed out.
    We have created Material Master Number for Contract/ BPA items. When we input that particular material number under the components tab on the WO then release it ,it creates a PR. The Material Master description gets transfered to the PR.
    Our issue is that the Material Master is to generic and we would like to change the description on the PR level.
    Is this possible?
    Thanks,

    Hi
    I think neither there is any way to change the Material Description in PR nor its a good SAP Practise as it is having lot of implecations of stocking , physical inventory , reconciliation etc .
    If Item codes are generic suggest if u can use the PR or PO long text to enable the buyer for the procurement & supplier for supply the material as per long text specifications .
    Regards
    Sameer

  • Suddenly I can't send emails on mac mail iCloud account.  Actually I can, but only one line of text!!

    It's really odd.  I can send a 'blank' mail, even one with a few lines.  Anything more than that and the activity window shows it 'trying' to send then it just stops. If I then try to send a short mail after any larger one this is also stopped.    As an aside I also note from the activity window that mail appears to be downloading 1000's of messages but I don't see where these go.   I have a few machines and all of them are experiencing the same issue.  I have attempted uninstalling the account and then reinstalling it but no change.  Does anyone know what this could be as it really is driving me nuts!   I have used macs and mail for years and it's all been good until now.

    Apple sent an update for iMac and after installing it my e-mail is working fine.

  • Only able to laydown one clip from the time line

    When try to do a assemble to tape using the edit to tape window, I drag the clips from the sequence in the time line and drop into the assemble edit box, but this only lays down the first clip. I am sure this is something stupid I am doing but I cannot see what.

    dont drag the clips, but drag the sequence itself from the browser...
    Rienk

  • How to adjust splitted lines into one line in Text file?

    Hi Guys,
    I have a text file with 3 fields(comma separated): GLCode (Number), Desc1 (Char), Desc2(Char) and need to load it into BW.
    My Text file looks like:
    1011.00,"Mejor PC Infrastructure","This line is ok."
    1012.00,"Telephone Equipment $","This line ends in next line.   
    1)Need to change the equipment immediately.
    2)Take immediate action"
    1013.00,"V1 Computer Server Infrastructure # Equip","For purchases
    of components that make up the company's network, such as servers, hubs, routers etc."
    1014.00,"Flash Drive","Need to provide all IT Developer"
    This is how file looks like. Now I need the followings:
    1. Need to remove the space and need to adjust the splitted line into one. Say here
    line/record 2 is splitted into 3 lines and need to adjust in 1 line.
    2. In Line 5 (Record 3) data splitted into 2 lines and need to make 1 line.
    3. Need to remove bad characters.
    Could someone help me please how to proceed ?
    Regards,

    Not quite correct by my testing.  Try:
    $i=0
    Get-Content .\test.txt | ForEach {
    If ($i%2){
    ("$Keep $($_)").Trim()
    }Else{
    $keep=$_
    }$i++
    Good catch!
    Boe Prox
    Blog |
    Twitter
    PoshWSUS |
    PoshPAIG | PoshChat |
    PoshEventUI
    PowerShell Deep Dives Book

Maybe you are looking for