Only able to have two Airplay targets

I have a little Netgear powerline network to connect the network to an Apple TV, Zeppelin Air and a Yamaha receiver. I am only ever able to see the Zeppelin and the ATV OR the Yamaha and the ATV show up as an iTunes Airplay target. (e.g. turn off the Zeppelin and the ATV and Yamaha are there, turn on the Zeppelin and the Zeppelin and the ATV show up)
Troubleshooting:
1. Everything is at latest firmware / patch.
2. Powerline connectivity is great... each link is over 100Mb
3. I can see all three devices on the network at a time (e.g. they all get an IP and I can get to the web interface) I just can't get them to all connect to iTunes on either the PC or iOS devices at the same time.
4. I have moved the ATV to wireless... no difference.
iTunes 11 (latest) on PC. iPad (iOS 7.x latest), iPad (iOS 8.x latest)
Any thoughts? Bizarre issue.

So I tried another project, and I got upto 4 picture overlays untill iMovie would not 'overlay' any more that I added.
I'm off to Final Cut Express...and i move was so easy and enjoyable until this happened

Similar Messages

I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?

I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?

I HAVE T.V VOLUME!!! Thank you sooooo much eww. I was on my way thinking I would have to buy yet another type of cable. : ) Again thanks!!!

I used to be able to have two ways to secondary click in 10.6. Now I can only pick one in System Preferences/Trackpad.

Is there any way I can have secondary click activated by two fingered tap on trackpad AND by clicking the bottom right of the trackpad?
I have a Macbook, Late 2008

They've consolidated the options as you see. You can still two fingered tap and click but you need to use two fingers to click. You can do this anywhere on the trackpad.

Only able to add two photo overlays to my movie

I have move that I'm adding still images over the video in various times. It's easy enough, Just drag the photo from the photo browser onto the clip and then it appears on top of the image.
I have added two still photo's to my movie so far, but when I add more still pictures, they appear above the movie strip, but it doesn't 'overlay' on playback.
I hope I'm making sense.
Any idea?
Thanks in advance.

So I tried another project, and I got upto 4 picture overlays untill iMovie would not 'overlay' any more that I added.
I'm off to Final Cut Express...and i move was so easy and enjoyable until this happened

Is it possible to have two encrypted time machines on one partitioned hard drive?

I am trying to use encrypted time machines for two macbooks (15" and 11") with only one USB hard drive. The problem is that after creating one encrypted time machine for my 15" in a separate partition, the hard drive does not work when plugging it into my 11".
What happens is that I am prompted to enter in my encryption password for the 15" time machine on my 11". I enter in the correct password but it does not work (i.e., password fail). The interesting part is that when I plug the hard drive into my 15", I am asked the same thing, but the password entry works.
This is my current setup for my 1tb usb hard drive:
1) 400gb for data
2) 400gb newly encrypted time machine for my 15"
3) 200gb unencrypted time machine (with old 11" time machine backups) for my 11"
The hard drive is formated/partitioned in RAID format.
All I want is to be able to have two encrypted time machines for each macbook on one single hard drive. Previously I was able to maintain two separate time machines (unencrypted) on this hard drive. I decided to try and encrypt both but seems like I am getting something wrong.

I am prompted to enter in my encryption password for the 15" time machine on my 11".
If I understand correctly, you want to mount the other partition. Are you prompted to do that? Does the password include any characters other than plain letters and digits? Are you using the same keyboard layout on both machines?

Can you have two copies of Encore CS6 running on the same computer?

I'd love to be able to have two copies of Encore on the same computer. While one copy is encoding and burning, I'd love to get another project started and encoding on the same computer and maybe, if possible, even start burning to a separate external burner. But first, I'd love to just be able to have two copies of Encore open on the same computer. I tried copying the Encore CS6 folder to a different drive and then running it but it says there's another Encore in session and this may cause issues with the hardware.
Windows 8.1 Pro
X99 5930k 6-core
32 GB Ram
GTX 970 4GB GPU
Thanks!

I can't imagine Encore being able to run 2 instances.
Build from Encore to an image (iso), and get ImgBurn. You can run multiple instances of ImgBurn and burn as many DVD/BDs as you have burners (including externals via USB or whatever). Send him a donation; his product is fantastic.
http://www.imgburn.com/
John Smith re avoiding unwanted addons in the download/install:
http://forums.adobe.com/thread/1322583

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

We have two iphones and only one ipad. We want to be able to use "find my iphone" for both phones, which have separate apple ids. How do we get our ipad to accept this?

We have two iphones and only one ipad - no mac. We want to be able to use "find my iphone" for both phones. How do we get the ipad to accept two iphone accounts? icloud is enabled on all three devices.

Also, be aware of the following:
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod/iPhone should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

How do I rename one wrongly identified photo in Faces? I seem to only be able to merge two stacks of photos to the correct name, but that is not accurate. I only have one photo in a batch under a certain name, that is wrongly identified.

In iPhoto '11: Select the photo in the "Faces" stack, open the "Info" panel, click on the face name in the "faces" brick and then on the name below the face to edit the name.
Regards
Léonie

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

HT4314 I have two iPad with one game centre account as the second iPad is my sons machine. I created a second game centre account but am not able to log into it as game centre only seems to let me put in an appleID, can someone suggest how I can get his s

I have two iPads, one is my son's machine. Previously he had an IPad 1 and mine was an ipad2. The iPad 1 died so I bought myself a new ipad4. I have only one appleID for both machines but created two Game centre accounts as there is a couple of games we both play and have different high scores. ipad 4 is nicely set up with all of my game data but now I would like some help in reinstating My sons game centre account (previously on the ipad1) now on the iPad 2. When I try to log into game centre it only lets me out in my appleID which gives up my game center account. Thankyou.

You and your husband can share a store account and still have seperate iCloud accounts for your contacts, bookmarks and stuff like that. Click here for instructions to make an apple account without entering a credit card. Make sure you use a different email address for each apple account.
Set up your iPhone/iPad whatever using the new account for iCloud. Then go into settings/store and sign in with your purchasing account, you may need to sign out of the other account. To the best of my knowledge, your household is allowed to share purchased legally, someone please correct me if I'm wrong.
Once you each have your own devices set to your own accounts you can set them to backup to that account and it will keep all your contacts seperate.

I have two monitor speakers that I would like to airplay to from my iMac. Is this possible? Is there an adapter or receiver? The monitor speakers are KRK VXT8.

I have two monitor speakers that I would like to airplay to from my iMac. Is this possible? Is there an adapter or receiver? The monitor speakers are KRK VXT8.

They have a trial version you can test before you purchase. It limits you to 10 minutes of streaming before it starts inserting noise into the stream.
But you may not need it. I've read a bit further, and it appears that you may be able to stream any system audio to an Airport Express without needing AirFoil since you have Mountain Lion. I though it would work only with an Apple TV, but I've seen mention that it works with the AE as well (I don't have one to try). When you get your Airport Express set up, go to the Sound (speaker) icon in the menu bar, hold down the Option key, and click the icon. You may see the AE listed there as a selectable output device; if so, select it and all your system audio should be sent to the AE, including Spotify.
Regards.

I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

Were you able to reset the account's password ? If not then how did you try to get it reset e.g. http://iforgot.apple.com (which would have sent it to the rescue email address if you have one on that account) ? You can also try contacting iTunes Support in your country to get it reset : http://support.apple.com/kb/HT5699
And no, accounts can't be merged nor content transferred between accounts.

HT4557 I have two apple tvs but my ipodtouch & ipad only picks up one please if you can help?.

I have two apple tvs but my ipodtouch & ipad is only picking one up Help !!!

Did you try here:
Troubleshooting AirPlay and AirPlay Mirroring
Did you also try turning off the one ATV that the devices do see?
Both ATVs have different names, right?
Did they both show up before?

I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then get the same replay to enter my Apple Id have only been able to update one of them to latest

I have three Imacs running Final Cut X but only able to update to 10.0.7 on one of them. Everytime I try to update it ask for my apple ID which I submit...then I get the same message to enter my Apple ID...Any suggestions?

Easiest thing to do is put the app on the non updated computers in the trash and then copy the new app on to a flash drive and copy into the app folders on the other two computters.

Only able to have two Airplay targets

Similar Messages

Maybe you are looking for