Only able to laydown one clip from the time line

When try to do a assemble to tape using the edit to tape window, I drag the clips from the sequence in the time line and drop into the assemble edit box, but this only lays down the first clip. I am sure this is something stupid I am doing but I cannot see what.

dont drag the clips, but drag the sequence itself from the browser...
Rienk

Similar Messages

Overlays on the clips in the time line

Hello
I am not sure if there is an answer to my questions but maybe there is a trick i have not discovered as yet. I am having some serious issues with the overlays on the clips in the time line. With the overlays I mean the name of the clip, especially on the audio clips. It is so hard to work good with the audio clip in the time line especially when I want to put in a fade in the beginning or need to move the audio level up or down every time the name of the clip is in the way and i can not see the the waveform. I know I just could put the clip in the viewer and do it from there but in my opinion the viewer is very cumbersome to work with as you do not see the whole clip especially if work zoomed in or have a segmented clip. I find it much easier in the timeline except for the overlays there.
I have written to apple but I guess they do not see a need it would be nice to have the ability to turn it off in preferences

thanks
is that new or was that always there. Not to sure if I have tried that in the past
anyway it helped and will makes things much faster
one other question maybe you have an answer to that too. it seems both Audio tracks are independ when putting on keyframes is there a way when using keyframes in the time line that it affect both channels of audio for example a1 an a2
once again thanks for your help

In the case I've deleted a clip in the tim line it's also deleted in the clip window

I'm just starting with FCP and I've a problem concernig deleting a clip in the time-line. What is the correct way to delete it only in the time line?
Thx a lot for your help

You've opened the in the timeline, instead of in a Project, so when you delete it, it's lost from the browser.
You can delete clips from a project without deleting them from the Browser. To create a project, use the film canister icon at the bottom left of your screen.
Andy

Getting the audio back on a video clip in the time line

hi all,
and happy new year!
have deleted the audio from a video clip in the time line and now want it back, how would I get the audio back?
thanks for your time
jonyfoz

Put the playhead at the beginning of the clip and press the X key. It should mark in and out point for the clip. Press the F key to match frame back to the same clip. Make sure both video and audio target tracks are set correctly and press F0 to overwrite and edit the clip with audio back into the timeline.

Sliding video clips along the time line

Quite often as I edit, I like to place clips in the time line forward of my current edit point. For example I might find a shot that works well with a musical swell or beat 30 seconds down the track. With the magnetic time line, I can't slide that shot to the point on the time line without the shot wanting to ping back to the final edit in the time line, or you have to insert place holders or slug. Any ideas for a quick easy way to slid clips?

I had that problem. Solution for me is to take your cursor and not just drag the stuck clips laterally parallel but lift them up slighly in above the time line and move them in any direction. The connecting thin vertical blue line line will still be attached to the TL but some how lifting them up slghtly allows you to drag them anywhere into the TL.
Skyler
San Francisco

Hyper-V Only able to run one VM at a time

Hi all,
I have Hyper-V set up with about 3 VM's on Server 2012, but i can only seem to run one VM at a time.
The server has the following:
32GB Ram
1TB HD with 425GB free
When i have one of them started and running, it works just fine.
As soon as i try to run a 2nd VM, i get the following error:
"'PC1' failed to start.
Microsoft Synthetic Mouse (Instance ID 58F75A6D-D949-4320-99E1-A2a2576D581c): Failed to Power on with Error 'The name limit for the local computer network adapter card was exceeded."
I have tried to do the following:
Disable all networking on each guest VM
Removed DVD Drive
Increase MAC range
Set static MAC
Changed boot order to put the CD to the bottom
Disable the integration services from each VM
Each VM has different netBIOS name
Each VM has a different VHD and OS
When starting the 2nd VM, it gets to about 10% and then shows the above error message.
Is there anything anyone can suggest?
Thanks

Hi Skaliam,
What is your VM's OS ？
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

File error: The specified file i locked. when i am trying to render a clip on the time lin e

WHen i want to render a clip on the timeline it tells me this message"file error: The specified file i locked."drive and file and they are not locked.
What setting do i check for this
because up till now the program was rendering all clips on the time lne
I have checked the the drives and files and they are unlocked.
please advise
i have to render the clip from the timeline as n export then bring it back in
annoying !

Before I ask you to check permissions on the drive you save your material and output files, try creating a new project, copy everything from the old one in it (highlight-copy-paste in new project) and save as with a new name. Does this work?

In the time line, cutaways and titles are supposed to be linked on the top side of movie clips in the time line window. I don't know what I did, but now they are linked to the bottom side. How do I get them up to the top where they belong?

I'm working on a movie in FCP and using cutaways and titles in many places in the timeline. While working on a movie 2 days ago, and I don't know what I did, all the cutaways and titles are now linked to the movie clips from below rather than above. When I "grab" them and drag them up to the top-side, as soon as I "release", they go back down. Along the menu bar, I've check the "view", "modify", "clips", etc., looking for any thing that might refer to appearance of the time line. What must I do to get the cutaways and titles back on top where they belong? The audio clips remained properly-linked to the time line and play properly. The cutaways and titles can be seen but do not play.

The cutaways and titles should be linked above the timeline clips, not below

How to reclaim spare space back at the end of my clips on the time line

When I have edited stuff on the time line I find that through moving clips around that I have an empty space after my collection of clips that I have arranged. How do I reclaim that empty space back so that where my clips end so does the time line.
I have tried saving the project and reopening it but this does not seem to do anything as I still have the space left.
Any help would be gratefully received Thanx ahead of time.

Control click on the empty space and, on the drop down menu, click on Convert Empty Space to Clip. Then, delete the clip you just created.
If the empty space is at the end of your movie, you can do the same as above. But, if your playhead still continues moving past the end of the movie, then expand your time line as wide as possible and check down your time line for little bits of clips left over from editing, and delete those. Any audio that extends past your video clips at the end of the movie should be trimmed back as well, even if you have muted them.

Only Able To Add One File At A Time From Mapped SharePoint (2013) Drive to Outlook (2010) E-mail

I am using SharePoint 2013. I have mapped several network drives. When adding files off SharePoint to an Outlook email, I can only add one file at a time. I can add multiple files IF they are not on SharePoint (e.g., stored locally, or on Dropbox); Previously,
when using SharePoint 2010, I was able to upload multiple files.
ANy advice?
Thanks.

Hi,
There are two methods to add multiple files from SharePoint library to outlook emails:
Sync SharePoint library to outlook via “Connect to Outlook”, then you will find SharePoint Lists in outlook. Locate the library folder, you could select multiple items and drag them to an email.
Open SharePoint library via “Open with Explorer”, then you could selected multiple files and drag them to an email.
Regards,
Rebecca Tu
TechNet Community Support

Only able to edit one page from a project then must shut down to open another

Hi! I have upgraded to Muse CC 2014 on a Windows 7 machine, when I open a project I can only open a single page from the planning window. It will not allow me to open another page when double clicking on the page icon. If I close the first page opened I no longer have the ability to open any pages for editing. I have to FORCE QUIT Muse and reopen to edit a single page every time. Anybody have this issue and a fix? I already have went through the usual CC uninstall al reinstall so please do not suggest it.

Thank you for providing your file. It's been very useful. Sorry for the slow reply. Adobe in the US shuts down for the 4th of July week, so the Development Team's back from leave today.
We've isolated the cause of this and are working on an update to address it. In your file this bug is triggered by groups that contain HTML Insert objects which are slow to draw. The header on your master page contained multiple groups with HTML embed code objects. I've ungrouped those and that avoids this bug without changing the appearance of your pages. I've sent your file back to you using Adobe Send. You should receive an e-mail notification shortly, if you haven't already.
Now that we are aware of the problem and the cause, we're actively working on an update to address it. In the meantime, if you avoid grouping HTML objects with other objects in Muse you should avoid this bug.
Very sorry for the inconvenience. A huge THANK YOU for sending us your file.

Prior to updating the iphone 5 to ios.7, i used to be able to go to Notes and scroll through all listings until I found what I wanted. Now i am only able to view one page at a time and have to back and forth between the main menu and each page. Help?

Prior to updating my iPhone5 to the "new and improved" ios.7, I used to be able to go to my Notes app and scroll through the various categories until I found the item I was looking for. Now, under the "improvements" I have to open each page, one at a time, until I find the desired category. This strikes me as a big step backword. Any solutions in the community?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

Firefox 15.0.1 runs so slow on Mac OS 10.7.4, Why? I am only able to load one tab at a time, and usually end of using Safari which I like more and more. Any hel

This has really gotten back since I update to 15.0.1. I can't even get some sites to load. I have added nothing else. I don't have spyware, or any other similar programs.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

PP crashes immediately when trying to move a clip to the time line

I am a fairly new user, so this problem may be mine! I can import a clip to PP but the program crashes as soon as I try to move it to the timeline. This happens randomly. The movie I was working on and importing to last week is now causing crashes and is lost. Tidying up stray files has not helped.

MPEG-4 (QuickTime): 116 MiB, 2mn 9s
1 Video stream: AVC
1 Audio stream: PCM
Overall bit rate mode: Variable
Overall bit rate: 7 538 Kbps
Encoded date: UTC 2014-01-18 14:37:06
Tagged date: UTC 2014-01-18 14:37:06
Writing library: Apple QuickTime
29.97 fps
this is the info cut and pasted from MediaInfo window
thanks

I need to show how colour separations work by gradually combining four single-coloured clips in the time line?

Hi, I need to demonstrate how colour separations work in the printing process, by animating the additions of each single colour plate to the overall picture. I have four jpegs, one of each colour, plus black, and I want to animate each one on the timeline to simulate the addition of each colour to the printed page. How can I do this? Thanks in advance. Phil

Video and print do not work in the same way. Video uses additive color, print uses a subtractive method.
You will have to fake it. Choosing a simple dissolve and combine method, you would also need the interim stages, say a Cyan + Yellow plate and a Cyan + Yellow + Magenta plate, eventually dissolving into the full color version.
Another way: Have each of the 4 plates appear one after the other on a quad split screen. Allowing time for an explanatory narrative, simultaneously have the 4 plates grow to full screen and move into position. At this point, you can quickly fade to a full color plate.

Only able to laydown one clip from the time line

Similar Messages

Maybe you are looking for