Only allow Webaccess for Apache
I have NW 6.5 server running GW Webaccess 7.01 IR1.
I would like when people accessing the Apache server via port 80 or 443 and
does not matter which's the URl they use, they will be redirected to
https://webmail.domain.com/gw/webacc.
I have edited http.conf with
<VirtualHost IP:80:
ServerName webmail.domain.com
RewriteEngine On
RewriteRule ^/(.*) https://webmail.domain.com/gw/webacc [L,R]
</VirtualHost>
and it is redirecting properly when I use the following URL
http://ipaddress
http://webmail.domain.com
http://webmail.domain.com/servlet/webaccess (in case user has the old GW
6.5 UR)
however,
https://webmail.domain.com redirect me to
https://webmail.domain.com'welcome/index.html
https://webmail.domain.com/servlet/webacces game me "Object not found,
error 404".
Is there a way to redirect all requests to Apache to
https://webmail.domain.com/gw/webacc
Note that I don't have iManager installed on this machine.
Thanks
Ronny
you can also modify the login.htt template in the tomcat directory so
any attempt to connect to the servlet will redirect to the one page you
want. cool solutions has writeups on doing this...
you can get a much more descriptive answer down in the groupwise
groups.
Cheers!
Richard Beels
~ Network Consultant
~ Sysop, Novell Support Connection
~ MCNE, CNE*, CNA*, CNS*, N*LS
Similar Messages
-
Time Machine restore only allows restore for previous 24 hours
I'm using Time Machine on a 500GB Time Capsule. My Mac is running 10.5.2. This morning I tried to restore a file from a backup several days ago. Although the correct date is listed in Time Machine, only the backups for the last 24 hours can be accessed from the Time Machine interface. The other dates are listed but are grayed out. If I access the backup volume from the Finder the backups are all there and I can restore my files.
Any ideas?Yes, but I didn't manually mount the disk image. It mounted (I think) when I first launched Time Machine.
That said, I just got home and launched the Time Machine interface again. This time it worked without a hitch.
I'll try and do some more experimenting if the problem occurs again. -
REPLACE COLOR only allows graytones for replacement color
Hello,
I am trying to use the REPLACE COLOR command to change a white sky to a blue sky. I am running Photoshop CS on Windows XP system. Photoshop provides two descriptions on how to use the REPLACE COLOR command and I have tried both. Howwever, for either one, when I attempt to set the color that will be used to replace the original color, the color picker always "previews" and uses a graytone rendition, not the tone I actually attempt to set. When I wag the mouse over the entire color picker swatch, the preview alway renders a graytone. If I instead type in a known 6-hex digit color identifier I still get a graytone rendition, not the actual
color.
I am trying to change the color for only a portion of the image, so I'm using the rectangular marquee to selection the portion I want to change.
For completeness, here is a list of steps I'm performing-
1)In the Layers palette, select the layer containing the color you want to replace.
2)Use the rectangular marquee to select only a specific area in the image you wish to change.
3)Choose Image > Adjustments > Replace Color.
4)In the Replace Color dialog box, make sure Selection is selected under the preview window.
4)In the image, click the color you want to change.
5)Double-click the Result swatch and use the Color Picker to select the replacement color and click OK.
Any clues what I'm doing wrong or what I may hav set wrong?
Thanks,
Ron GlosReplace color will not work for white or black, as there is no color. There was a post about a month ago with similar topic, with some solutions. Sorry can't remember how to get there, try search with this in mind.
edit
try this link
http://www.adobeforums.com/webx/.59b55cf6/2 -
Automatic carryforward only allowed for amount 0
On 4.7, we are attempting to process a payment for on a FY2007 Purchase order using MIRO. We are now in our FY2009 year but we are receiving the error message FMCF101 - Automatic carryforward is only allowed for amount 0. What could be the cause of this?
The PO was created on 03/21/2007. A goods receipt for the total quantity of the PO was entered on 06/27/2007. Two invoices were successfully processed on 02/28/2008 but when we attempt the final 3rd invoice for 06/30/08, we receive the error message.If you have Periodic Based Encumbrance Tracking PBET active and you use the GR/IR updating in OFUP as well as you use the invoices to determine the CF level, then you MUST carry forward the GR - which in FM are considered invoices (same value type 54).
Trying to reduce the GR without having carried forward the GR is not valid and you will get the error "Automatic carryforward is only allowed for amount 0".
The only possibilities to avoid this error are:
1. Carry forward the GR from the previous fiscal year to the one being modified.
2. In OFUP do not use the invoice to determine the carry forward level.
3. Do not update both the GR and IR but only the IR
4. Do not use PBET. To update the GR in the previous FY or update it in the current FY without carry forward, contradicts PBET. -
I am a Canadian staying in England for a few weeks. How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..
in the iPhoto preferences change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
LN -
I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?
I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?
-
I assume my Apple TV should allow me to view all events, albums and slideshows in my iPhotos app but it only allows four events and four albums to display on my television. I'm using a Optus mini Wi Fi for my home network. Could this be the reason for limited access via my iMac computer?
ChrisNo, I have not chosen photos to share as I assumed that the Apple TV would access all photos and music that are stored on my iMac.
Thanks for your advice. I will check it out.
Chris -
Traffic only allowed one-way for VPN connected computers
Hello,
I currently have an ASA 5505. I have set it up as a remote access SSL VPN. My computers can connect to the VPN just fine. They just can't access the internal LAN (192.168.250.0). They can't ping the inside interface of the ASA, or any of the machines. It seems like all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping that VPN-connect machine from the ASA and other machines inside the LAN. It seems the traffic only allows one way. I have messed with ACL's with no avail. Any suggestions please?
DHCP Pool: 192.168.250.20-50 --> For LAN
VPN Pool: 192.168.250.100 and 192.168.250.101
Outside interface grabs DHCP from modem
Inside interface: 192.168.1.1
Current Running Config:
: Saved
ASA Version 8.2(5)
hostname HardmanASA
enable password ###### encrypted
passwd ####### encrypted
names
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 10
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 10
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan10
nameif inside
security-level 100
ip address 192.168.250.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool 192.168.250.100-192.168.250.101 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 192.168.250.0 255.255.255.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.250.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.250.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd dns 8.8.8.8
dhcpd address 192.168.250.20-192.168.250.50 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
address-pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
group-alias AnyConnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: endHello,
I seem to be having the same kind of issue although I cannot ping from either end.
Ive set up a l2tp/ipsec vpn which I am able to connect to and get ip from my ip pool (radius authentication is working).
I tried running:
access-list NAT_0 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list NAT_0
but i get an error msg saying that the syntax of the nat command is deprecated. Im running ASA version 8.4.
Ive fiddled around abit to find the correct syntax but have been unsuccessfull so far.
Any help would be much appreciated
This is a part of my config:
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network AD1
host 192.168.1.31
description AD/RADIUS
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network vpn_hosts
subnet 192.168.2.0 255.255.255.0
access-list AD_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list split-acl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.1.0 255.255.255.0
access-list inside_0_outbound extended permit ip object NETWORK_OBJ_192.168.1.0_24 object vpn_hosts
ip local pool POOL2 192.168.2.2-192.168.2.10 mask 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static vpn_hosts vpn_hosts
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 ########## 1
no vpn-addr-assign aaa
no vpn-addr-assign dhcp -
Hello,
I am looking for example which allow some of the IP's belongs to INSIDE which can allow to using PAT method to access Internet.
With reference to URL
http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/nat_objects.html#pgfId-1455942
It is talking about the whole 192.168.2.0/24 subnet.
The following example configures dynamic PAT that hides the 192.168.2.0 network behind the outside interface address:
hostname(config)# object network my-inside-net
hostname(config-network-object)# subnet 192.168.2.0 255.255.255.0
hostname(config-network-object)# nat (inside,outside) dynamic interface
I would like to check how should config if only allow parts of IP belongs to 192.168.2.0/24 can be PAT to internet and others will deny. Should be need create additional ACL?
Thanks!Hi,
You might be better of limitin the mentioned hosts from connecting to the Internet in the interface ACL rather than making a special NAT configuration that determines if a host can connect to the Internet.
If you want to control which host gets NATed then you could use the Manual NAT / Twice NAT configuration instead of the above Auto NAT / Network Object NAT
Example could look something like this
object-group network PAT-SOURCE-HOSTS
network-object host <host1 ip>
network-object host <host2 ip>
network-object host <host3 ip>
nat (inside,outside) after-auto source dynamic PAT-SOURCE-HOSTS interface
You can then add the addresses directly under the "object-group" or remove them when needed.
You could naturally use small subnets instead of the host addresses in the above example if all the users are from a certain range of the subnet you mentioned. You will also have to make sure that there is no other NAT configuration on your ASA that would apply to the users.
The above Manual NAT / Twice NAT is at the lowest Section 3 (priority of NAT configuration) because it has "after-auto" as a part of the "nat" command.
Hope this helps :)
- Jouni -
I'm tying to make a payment for photoshop but the fields on the payment form won't allow me to enter the correct card information. Im based in Japan but my card is registered to a UK address. the fields only allow for a Japanese style address and postcode. What can i do to complete the payment and get photoshop!
As far as I know, your registered location and your credit card information must match... but,
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
I recently bought a new macbook and installed Acrobate Pro. My settings/preferences did not come over and I do not have the same style options for my signature. It now only allows me three options and the style I have been using for the last year is not there. How do I add additional options and get my preferred signature style back?
Hi Amanda ,
Which version of Acrobat are you using?
Which signature style are you talking about?
You can go ahead and try uninstalling and reinstalling it and see if that works for you .
Use the cleaner tool to uninstall it .Here is the link.
Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs
You can refer to the following link to re install it .
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Regards
Sukrit Dhingra -
I am interested in a tool that can access a clients webcam and begin recording from their device. When the time is up, it should store that recorded video to a server. Then, of course, the files can be accessed. Streaming is of less significance than simply capturing and accessing video from a client
Can I do this with only Adobe Media Server Standard Edition?
Bearing in mind, I may need to be capturing video from multiple clients at one time. Is this limited by the fact that Standard only allows "one-way broadcasts?"
Thanks,
CarlThanks for the suggestions. I've tried using DVCPRO HD in the past, but the picture quality of the captured screen footage turns out blurry. The only codecs I've found that provide a perfectly clear image are H264, Animation and Uncompressed 8-bit. The problem with the latter two is that video files lasting only a few seconds measure in the 100s of MBs. Working with files that large would slow my editing and rendering down to a non-workable length.
I just don't understand why I can't edit H264 video if my sequence codec is set to H264. The 'Codec error' I get is baffling. -
Capacities of type 1 or 2 are only allowed for resources
HI,
I am getting the below error during selecting the capacity catogory 001 in the Capacities tab in CR01 transaction.
Capacities of type 1 or 2 are only allowed for resources.
Thanks and regards
MurugesanWHat is the work center category you are creating...
-
I want to copy fotos to a mass storage external HD, but my emac only allow me to copy from the HD to the mac and not from the mac to the HD, how can I do it? thanks in adavance for your help
The external HD might be set to Read Only on your eMac. Try this:
If the external HD shows on your desktop, single click the HD to highlight it. From the Finder Menu bar at the top of the screen, click on File, pull down and click on Get Info. At the bottom of window that opens, under Sharing and Permissions, you might see something like:
System: Read & Write
Admin: Read & Write
User X: Read Only
User X being your user account.
Good luck. -
the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?Check out pogo plug device, it allows you to upload camera roll via wifi.
Maybe you are looking for
-
the other way around works perfect. does anyone has a clue?
-
I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?
-
How do I get my iCloud account to sync with the data on my mobile device?
I recently erased my hard drive in my iMac and did a clean install of Yosemite. My iPad and iPhone have my contacts on them ,but my iCloud account and my iMac only have the contacts that I've added manually. How do i get the contacts from my mobile d
-
In the last week I have noticed that I can't get some apps to work. Like right move, iplayer, my supermarket, shopitize. I have tried updating the iPad, reinstalling the apps. Rebooting the iPad. I can't think of what else to do as I don't know if is
-
Maximum No. of Partitions in a Table?
Hi, What is the Maximum no.of partitions in a table? Best Regards, Naresh Kumar C.