Only allowed 1 simple list of web portal?

Hi all,
I have 4 simple lists as user prompts for a Service request. From the the web portal all is fine and seperate.
When i log the same request from the console the 4 list are now 1 big list.
Any way to seperate these out for the console other than creating MP lists for each?
Which would mean you can only have 1 simple list per Service request?
2012 RTM.

Hi Anton,
From the request offering setup, i added 4 differnt simple lists
And from the console when i open the Service request i see all my lists with the default value for list in item 6 above, and when i try to drop down it shows everything from all 4 lists
Any thoughts or is this normal behaviour?
Thansk in advance
John

Similar Messages

List View Web Part - Default Chrome Setting

In our environment, the "Default" chrome setting does not display the title or the border on our list view pages. We have tried Oslo and Seattle master pages and neither displays this to the end user. We do see the title in Edit mode, but
not once the page is saved. If we switch it to Title Only, it does display.
Is this the correct behavior? If so, is there an easy way to change the chrome setting to "Title Only" for the list view web parts in one particular web application when a view is created?

That is the default behavior. normally, the listview web part is on a page where the title of the library is displayed on the page, which would make it redundant to display it in the web part only. I don't know any way to change this behavior
by default when creating a new view.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Sharepoint Error Message "Configuring column based defaults is only allowed in document library lists"

We set up a SP 2010 site with several document libraries. Library A works fine only when I click on column default value settings I get the following error message:
"configuring column based defaults is only allowed in document library lists"
This list is a normal document library and all other settings work fine. If I create a new document library or go to the settings of document library B I don't see this problem and the feature works fine.
How can I solve this problem within this library since I cannot delete the library and replace it by a new one.
Thanks.
library settings page of this library:

Hi,
According to your post, my understanding is that
when you clicked on column default value settings you got the error message.
What are the column types in the library?
It seems that some column types don't support default value settings.
I recommend to create a new library with the same columns to check whether you can set
default values.
If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS log file is in the location: C:\Program Files\Common Files\Microsoft
Shared\Web Server Extensions\14\LOGS
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

BSP Exception: Access to URL /irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher;jsessionid= not allowed

Dear all,
I've created out BI system in our new Portal installation and tested the connection. Everything works fine. I added the certificate of the portal to STRUSTSSO2 in BI ABAP and assigned SAP_ALL and SAP_NEW to my Account.in BI. If I open the iView from the portal I get a BSP Exception with the message:
The used connection by the iView is to the ABAP-Stack of the BI-system not to the JAVA-Stack. Is that correct?
BSP Exception: Der Zugriff auf die URL /irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher;jsessionid=IDBYatWIpt_pX4uc52ChoZqMWkm1RAFW2qsA_SAP ist untersagt.
What can be the problem/reason?
Thanks!

Hi Gerrit
In both places you have to provide a authorization access to the end users then only it will work. because your are already said that in SAP_All & SAP_New working fine
Back end BI system access as per the word document as pasted the link
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=0CFIQFjAG&url=http%3A%2F%2Fbasisdsp.f…
For SAP portal you have to create iview's assign the same to end user
Assigning an Authentication Scheme to an iView - User Authentication and Single Sign-On - SAP Library
Portal Authentication Infrastructure - Configuring the Portal for Initial Use - SAP Library
BR
SS

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How do I only allow people on my buddy list to contact me (and stop spam)

How do I only allow people on my buddy list to contact me (and stop spam)

Go to iChats prefs/accounts

Locking PDF but only allow further signatures & get the list of of changes made after signing

Hi,
I have looked at Adobe Acrobat 9.0 and found the Signing > locking feature which blocks any changes after the document is signed. I need to know whether using Acrobat SDK, one could implement a similar locking option via plugin in a way that it ONLY allows further blank signature fields to be created or sign existing ones and locks all other changes. If possible, any pointers to API functions would be appreciated.
If the above is not possible using Acrobat SDK 9.0 then can the SDK provides a list of all the set of changes made after the signing is performed (at the time of verification) in the form of some codes which can guide the plugin author about what change after signing was done e.g.
a blank signature field was signed
a blank signature field is created
watermark has been applied
form is filled
sticky notes/stamps/other annotations are added
Regards,
mwak

Thanks for your response. I have just performed this:
I signed a PDF ( having no prior signature or blank signature fields ) using Adobe Acrobat 9.0 and locked it. I am now not able to create more signatures on this PDF. I believe I can't add more signatures even using the Acrobat SDK and Lock means complete lock-down of the document. This is different to what you said " it restricts modifications EXCEPT for other signings" or may be I am not understanding it clearly.
I created two blank signature fields. When I clicked on the first, there is no Lock settings at the time of signing. I believe because If it is locked then the next signature can't be signed. With only a single signature field present, the lock feature is there.
So I believe I have to resort to the option of identifying the changes in a revision and then if it the change is related to say adding stamps, sticky notes prompts the user at the time of verification.
Can some one point me to the API functions set which identify list the objects which have changed after signing.
Regards,
mwak

I have CS4 web Premium - I am trying to look at the Adobe Cloud option for the 2015 compable product. However...under my registered produst only Acrobate is listed...I also have the subject Adobe product. When I type in the serial # from the oriinal ad

I have CS4 Web Premium - I am trying to look at the Adobe Cloud options for the 2015 compatible products. However...under my registered products...only Acrobat is listed...I also have the CS$ Web Premium Adobe product. When I type in the serial # from the original Adobe CS 4 dvd's package I get a "product already registered"...but I can not find it's registration on any Adobe page and it doesn't show up under registered products on the Adobe Cloud page(s)
Since it's registered...how/where do I find this verification...
Thanks TRinAz
Message was edited by: Tim Rogers - spelling

You will have to contact support by web chat to figure out any such issues.
Mylenium

I want to configure Firefox to only accept cookies from a specific list of websites, but my "Allow Exceptions" list is deleted when Firefox closes.

I want to configure Firefox to only accept cookies from a specific list of websites, but my "Allow Exceptions" list is deleted when Firefox closes. (Firefox 5.0)

@dmcritchie:
''How do you expect to keep cookies for certain sites, if you wipe out all of your cookies when the session ends or you clear the same history through the Tools menu''
If you mean from session-to-session, I don't expect it to keep cookies. That's the whole point. Every time Firefox is opened, I want it to write a new cookie, and keep that cookie until it closes and no longer than that. (Perhaps I should clarify: I don't mean session in the networking sense but rather in the period of time when one starts using Firefox until Firefox closes.) The behavior I want is for it to be able to write cookies when open, but only for specific sites, and then forget about them on close.
I should also mention that your responses are worthless to me because you don't explain anything. For instance, the quote above is ''not'' obvious from your reply of "Make sure you are not clearing cookies". You need to explain this; what is obvious in a reading for you is not obvious for everyone.
Furthermore, how is "Site Preferences" related to "everything on the right-side"? (Not to mention that it's unclear what you mean by "right-side.")

Flickr upload -- only allows "web" photo size

When I click the flickr button in iPhoto 09, a dialogue box comes up with dropdown menu options for "photos viewable by" and "photo size." In "photo size" I am only allowed to select "web" -- the other two options are grayed out and unselectable. Is this normal? I want to be able to upload my original size photos.

Thanks for this answer, I was looking all over to see why the other options were grayed out. Well I was I've been saying I am going to go Pro for a while now; this thread will make me do it right now.

Only allow people in my Contact List to contact me...

In my Privacy settings, I have "Only allow people in my Contact list to contact me" checked, but I just recently, within the past week, started getting spam requests from people.
Why? I haven't touched my settings pretty much since I signed up (maybe at the beginning to get things right, but not within the past year and a half).

rww wrote:
In my Privacy settings, I have "Only allow people in my Contact list to contact me" checked, but I just recently, within the past week, started getting spam requests from people.
Hello
Uncheck the box > SAVE > Wait 2 minutes > Check the box > SAVE.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Allow only String to List

Hello,
I have a ArrayList.
ArrayList as = new ArrayList();Now i want to allow only string to be added in this arraylist how can i achieve this? Don't want to use generic.
Please guide.

Ankur Raiyani wrote:
i have been asked to do not use generic.
In given example where you have seen generics. It is clearly said if you don't want to use generics then use instanceof keyword.
I want such a way that List only allows me to add String if i add other object then it should throw an error.Exactly , i've gave an idea how to use instanceof and allow only string objects in arraylist.
If not clear, please go through the below program:
import java.util.*;
import java.lang.*;
class ArrayListForOnlyString
     public static void main(String st[])
          List stringArrayList = new ArrayList(){
               public ArrayList ar = new ArrayList();
               public boolean add(Object ob) throws UnsupportedOperationException
                    if(ob instanceof String)
                         ar.add(ob);
                         return true;
                    else
                    throw new UnsupportedOperationException("Only String Object are accepted");
               public void add(int index, Object ob)
                    if(ob instanceof String)
                         ar.add(index,ob);
                    else
                    throw new UnsupportedOperationException("Only String Object are accepted");
               public Object[] toArray()
                    return ar.toArray();
               public String toString()
                    return ar.toString();
          try
          stringArrayList.add(new String("10"));
          stringArrayList.add(1,new String("10"));
                // Uncomment the below line and run, it 'll give error , as you are trying to add Integer Object to array list.
          //stringArrayList.add(new Integer("10"));
          System.out.println("The objects of arrayList are : "+stringArrayList);
         }catch(Exception e)
                    e.printStackTrace();
}Edited by: 833545 on Aug 31, 2011 3:53 PM

Can i set this thing (wrt54g v6) to only allow access to the listed MAC addresses?

The subject is pretty self-explanatory...
I'm just not sure how to set up the restrictions to allow the listed machines and deny all others.

there is usually an option to "allow" or "deny" ....select the appropriate option.

Issues with Simple Lists in service requests

We are using Service Manager 2012 and have run into a problem with simple lists within the service requests we created. We believe the issues started after we upgraded to Service Manager SP1 and Silverlight 5.1. What happens is you can select
one of the options in the simple list, but if you decide to change back to the original option, the system won't allow it. In the case where there might be three options in the simple list (i.e. New, Change, Delete), you can select each one once, but
if we try to change it back to any of the other options the system won't allow it. We tested all of this before going live and everything was working, but just before we went live SP1 came out and so we elected to upgrade to it first. We then needed
to upgrade to Silverlight SP1 to work with Service Manager SP1. We retested all of our service requests again just before going live, but didn't think we needed to go through every simple list so we didn't retest this. Since then the simple lists
are problematic. Has anyone else experienced this and if so is there a fix that will correct this issue?

Yes!
We submitted a business impact statement back in February and after pushing them on a weekly basis, we finally received word that we will be receiving a hot fix next week. Until we actually receive the hot fix and confirm that it works, I will wait
to post another update on this.
With that said, they came up with a temporary workaround about 2-3 weeks ago. This is the message regarding the temporary fix that we received from the engineer that has been working on the issue:
After doing code review I identified the regression was introduced in the binaries that are included as part of this Silverlight XAP file:
RequestOfferingSilverlightModule.xap. As we discussed on the phone going back to the pre SP1 version means you will lose any enhancements/fixes that were introduced in SP1. Looking at the Change history for this module I only see two changes
that were introduced in SP1 and those changes are as follows:
The text field control only shows the first three lines.
Hierarchical support for List Items in Portal
To confirm my findings I replaced this XAP file with a pre SP1 version and I couldn’t repro the issue in my lab. I also confirmed implementing this module I lose the
above fixes that were introduced in Sp1.
To implement the workaround, please follow the below steps:
Connect to the Web Content Server, locate the following directory:
C:\inetpub\wwwroot\System Center Service Manager Portal\ContentHost\Clientbin
Rename the following file RequestOfferingSilverlightModule.xap
to RequestOfferingSilverlightModule.xap.org
Copy the attached file RequestOfferingSilverlightModule.xap to the folder:
C:\inetpub\wwwroot\System Center Service Manager Portal\ContentHost\Clientbin
Restart IIS by issuing the following command at the command prompt:
iisreset
Clear the client side cache and see if you can reproduce the issue.
Once confirmed the issue doesn’t reproduce, please proceed with testing all scenarios that make use of the Self Service Portal.
If you don't have the pre SP1 version of the file I'm sure you can get it from Microsoft. We are not using hierarchical lists so the temporary fix is currently working for us without any issues.

SharePoint 2013 users only see custom list and document lists that they uniquely created

In my first SharePoint 2013 project, I want to create a view where users can only see their own files that they generated. I think I know how to create this view when the list is associated with the 'Documents; folder. However I have created several custom
lists where I can only see these items when I am on the navigation pane to the right and the unique custom lists are listed under 'recent'.
Let me know if you can answer any of the following questions:
1. When on the main SharePoint website, can lists be displayed in other locations than what I just listed? If so, where would I see these other lists?
2. I would like to include the custom lists that are located in the 'recent' navigation pane as a view that only I can use. This would be based upon userid. If this is possible, how would you combine the lists lists in the same view? If this is not possible,
how would you set a view just for the lists listed under the 'recent' section?
3. The content approval solution under versioning settings of a library to restrict the documents to only ones that the user created (and also Approver rights). Then if they create a new view they still won't see the documents that were not created by
them. What about custom lists that are not in the documents area but are in the 'recent' area? Would this restrict users to see only items that they created?
4. Item level Permissions in advance settings solve this problem for the list in the document area and the custom list in the recent area? If so, how would you setup these values?

As it turns out the, setting Item-Level Permissions in a library is fully supported with PowerShell!
The PowerShell commands for changing this are very simple:
$web = Get-SPWeb http://YourSite/
$list = $web.Lists[“Your Document Library Name”]
$list.ReadSecurity = 2
$list.Update()
$web.Dispose()
Note the 3rd line which is where you determine the value for this setting using the following values:
1 = “Read all items”
2 = “Read items that were created by the user”
If you wish to modify the values for Create and Edit access instead, replace .ReadSecurity with .WriteSecurity with
the following values:
1 = “Create and edit All items”
2 = “Create items and edit items that were created by the user”
4 = “None”
For example:
$web = Get-SPWeb http://YourSite/
$list = $web.Lists[“Your Document Library Name”]
$list.WriteSecurity = 2
$list.Update()
$web.Dispose()
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Only allowed 1 simple list of web portal?

Similar Messages

Maybe you are looking for