Only allowed on two machines message

I got a message about CS4 already being on two machines. I have it on a computer at my dads house and on a computer at my moms house, at my dads house it's on two hard drives on the same computer in case one drive fails. Is this why I'm getting this message or did someone steal my serial number? I'm a student and I have a student version and the cs4 isn't compatible with my laptop. Thanks in advance.

"What is rather interesting is how you have two installations on one system on separate drives. Did you copy the directory structure or did you do separate installs? Note that you can't simply manually drag and drop Adobe software installation folders. Software must be installed in particular directories by the installer. It is indeed possible that you somehow activated twice on one system; something that isn't supposed to happen. You could try deactivating the "extra" copy on the system with two copies and see if that releases you to activate on the other system. Otherwise you may need to contact Adobe's Product Activation group (phone number is on your computer screen if you get the "too many activations" message), explain the problem, and they should be able to bump your activation count by one for you.
If you are the "primary" (or better stated the "only") on both systems, that is fine. "
Hey listen, I appreciate your replies. I installed twice on separate drives (separate installs...is there another way to do it?) on my dads machine. I activated it separately because I didn't know how to do it any other way. He had one drive fail at some time and lost everything and had some mac guru install another drive and put everything on both drives just in case. Since I spend time at both my parents house and since my laptop is lame they let me install my cs4 and quark on their machines. They don't even know what cs4 is let alone use it but know I need it for school.
"It is indeed possible that you somehow activated twice on one system; something that isn't supposed to happen" It did. I don't need two on one machine but dad suggested it so I did it. The weird thing was I didn't even use it at my dads. I double clicked on a word attachment in an e-mail and illustrator launched and the message about the two machines came up. Needless to say I was very confused.
And I called adobe but it sounded like I had to pay if I asked a question and they mentioned their site on their prerecorded message so I thought I would try here for free.

Similar Messages

  • TS1702 My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

    My iMessage is only allowing me to select messages to be sent and received from my email. If my number is an option, but it will not let me select my number, how do I get the iMessages to be sent to my number and not my email?

    Try ejecting your iphone from iTunes and then close iTunes. Now retry. Hope this helps.

  • Why can't I send multiple texts any more? I am on iphone 5 and it is only allowing me to send messages to 10 people at once! Previously on iphones 3 and 4s I could send to many more.

    Why can't I send multiple texts any more? I am on iphone 5 and it is only allowing me to send messages to 10 people at once! Previously on iphones 3 and 4s I could send to many more. I use my phone for work and want to send to multiple staff groups or project leaders the same information at the same time and not all of them have email capable phones so text has always been the best solution.
    Please help ?

    22ms is a long time for your computer, but I am wondering about your network. Are you 10 base or 100 base? Switch or hub? Have you tried a direct connection with a crossover cable? Just trying to spark ideas here. I use TCP all the time but only at 500 ms intervals.

  • Asset selections only allowed in repeat run

    Hi Experts,
    I am was posted Deprication 2009 with 12 periods from Planned posting run.
    When I am doing Deprication 2010 with 1 periods from Planned posting run for perticual period its work in test run u2018 T E S T R U N completed successfully , A document was created u2018, but when I remove the tick from test run system give.
    Error u201CAsset selections only allowed in repeat run Message no. AA734u201D
    Diagnosis
        Processing not possible because of errors in the parameters.
    System Response
        Processing cannot be continued.
    Procedure
        When performing a new posting run or a restart, you cannot limit it to
        the assets you want to be processed. You can only select assets in a
        repeat run. Start the program again with the appropriate parameters.
    Waiting for reply.
    In advance thanks
    Regards,
    Jemes
    Edited by: Jemes on Jun 8, 2010 3:21 PM
    Edited by: Jemes on Jun 8, 2010 3:23 PM

    When you run a planned, restart or unplanned depreciation run you can ony run it  only for all the assets in the real run
    When you have run the planned or unplanned depreciation it create records in the system for all the assets and there are errors then you should run the restart for all the assets.
    The repeat run you use when you have changed 1 or some assets in the old month and wand only to rerun for these assets the depreciation run.
    In a test run you can run it for only some assets but  as no test you have to run it for all the assets (only for the repeat run you can make a selection in the real run)

  • Found iCal events in Time Machine.  Now Lion only allowing me to import one event at a time.

    Upgrade my macbook pro over the weekend to Snow Leopard and then Lion.   I lost all my the majority of my iCal events.   Went to Apple store and they said that was rare and not sure how to restore my last back up from Time Machine on an external drive.   I've been spending hours trying to go through a bunch of threads on different MAC formums.  
    So I finally found my iCal events in Time Machine.   When I try to import these events, I am only allowed to highlight/import one event at a time.   This will take me forever to import years of missing data.   I basically have been using my iCal to journal for my 3 small daughters - first tooth, hair cut, etc.   So I am desperate to get these events back so I can get them printed and SAFE.
    Does anyone have any suggestions on how to import my ics files?   The Apple Store Genius had me tryng to import the corestorage.ics files.   2 or 3 of those files showed they were trying to be imported for over 4 hours.   I finally Forced Quit iCal.   I've tried this several times and same result. 
    The corestorage files were under user/library/application support/ical/sources
    I now located the calendar events user/library/calendars/ then a bunch of coded files leading to the events.  These events appear to be the ones I am looking for as I can read some of the files.   I have several years I want to import back into my working iCal.  
    Please help if you know how!!!
    Thank you,
    Very Upset Mama of 3 little girls

    Thomas - You are awesome - THANK YOU!  
    I did exactly what you said (CAN"T believe an Apple Genius did not know this) and I think all of my events got restored.  
    However, it duplicated all of the calendars - I have 6 (one for each family member plus an extra called home that we all have to do).   Not sure if I did something wrong, but do you have any ideas?  
    Also, the time setting must be wrong b/c I have events from 2008 showing up in 2012 - same day and time as the old sessoin - just out dated.    Do I need to manually change all of this?   Should I delete the Calendars folder again and try again?  
    Also, I read some where about deleting a iCal cache file.   Do I need to do this?
    I TRULY appreciate you taking the time to help people in this forum.   I have spent hours the past two days trying to figure this out.   Plus, now I need to figure out about upgrading my Office for Mac b/c I didn't realize I lost Office 2004 when upgrading to Lion.   
    Thank you for your time and support!
    Lori

  • Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone.  Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR.  I don't want to do any of that.  Just my phone number.  Is this possible?

    Using iMessage 8.0 with Mavericks to send sms message to my friend who has an iPhone.  Only allows me to log in under AIM, YAHOO, GOOGLE, or BONJOUR.  I don't want to do any of that.  Just my phone number.  Is this possible?

    Hi,
    The first run of Messages will ask you to enter an Apple ID to "register' with iMessages.
    If you do not do this but open the App and look in Preferences > Accounts then you will see the iMessages account and the Bonjour Account which will not be activated.
    Neither of these two account can be deleted. (even if not being used)
    If you then press the + icon to add you will get the choices you posted.
    To iMessage you need to "register" and Apple ID with the iMessages service.
    As Diane then points out you can link this to your iPhone number.
    This "syncs" (Displays on all devices) the various iMessages sent to either iPhone or Apple ID
    You can then chose  on both iPhone or Mac version how or which ID/Number is going to be used to "Start the conversations from"
    I have my Mac version set to start from my Apple ID and the iPhone from it's number.
    At this moment the Mac version cannot send SMS text messages to an iPhone.
    This is apparently coming with iOS 8 and OS 10.10 (Yosemite)
    An AIM account can send SMS Messages but only to a limited number of USA based phone users on these carriers.
    (Basically you add a phone number with country code +1 as a Buddy to your List)
    Mocked up number  (It not really an auto responder although you do get sent back and Error message about it not being valid)
    8:37 pm      Sunday; July 13, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Tab control only allows two page selections

    I am having a hard time understanding why my VI only allows two specific tab clicks every time I run it.
    Should I be using shift registers with the "initializing" Tab Controls on the left of the VI before it enters the loop?
    No matter what I do, it will allow me to change the tab controlled pane two times and then it will not react to anything.
    Once I have reached my maximum alloted, two clicks, then the main Cycle abort button will not react either.
    Kind of stumped...  Any help would be greatly appreciated.
    Attachments:
    FP1.gif ‏252 KB
    BD1.gif ‏201 KB

    WOW,
    you realize that two of your event structures are running in parallel with the while loop- and they will only execute once? One event- one event execution event.  The construct "finishes" done! it won't look for another event.
    Take a look at the shipping examples or the P-C QSM (events) template. 
    Your efforts are not bad, but, show a lack of LabVIEW basics-   Dataflow is a different Paradigm-    (AND REALLY POWERFUL)  but you do need to understand what happens when you use constructs that "break data flow" like locals, globals, and event structures and read the caveats in the LabVIEW help file to get grounded in "best practices"
    CAVEAT:
    I've probably "broken" most of the "best practices" guidelines- Intentionally! but I wanted specific things from LabVIEW that I knew would happen without race conditions.  99.995% of my code does not violate the "best practice" rules.  I write a lot of LabVIEW-  It gives me room in that 0.005% to do "interesting" things. 
    Jeff

  • Sharepoint Error Message "Configuring column based defaults is only allowed in document library lists"

    We set up a SP 2010 site with several document libraries. Library A works fine only when I click on column default value settings I get the following error message:
    "configuring column based defaults is only allowed in document library lists"
    This list is a normal document library and all other settings work fine. If I create a new document library or go to the settings of document library B I don't see this problem and the feature works fine.
    How can I solve this problem within this library since I cannot delete the library and replace it by a new one.
    Thanks.
    library settings page of this library:

    Hi,
    According to your post, my understanding is that
    when you clicked on column default value settings you got the error message.
    What are the column types in the library?
    It seems that some column types don't support default value settings.
    I recommend to create a new library with the same columns to check whether you can set
    default values.
    If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS log file is in the location: C:\Program Files\Common Files\Microsoft
    Shared\Web Server Extensions\14\LOGS
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • I am from South Africa an the itune store only allows the purchase of some music , whenever i try to buy Jesus Culture- Everything . an error message comes  "only availble in US " , PLEASE HELP .Thank you

    I am from South Africa and the itune store only allows the purchase of some music , whenever i try to buy Jesus Culture- Everything . an error message comes up  "only availble in US " , PLEASE HELP .Thank you

    I had the same issue this morning downloading a pre-order of Alanis, Flavors of Entanglement . I noticed that the only thing that had changed fro me was that I had some song credits for purchasing ticketmaster tickets over the past few weeks. When I went ahead and spent my remaining credits... it downloaded with no prompting or trouble. Maybe the credits issues hangs it up?

  • My iphone 4s only allows group message to 25 contacts?

    I need to send group message to about 60 contacts and I have updated my settings to allow group messages; however, it still only allows me to input 25 contacts.  Any recommendations?

    Why wipe the contacts? I'm not questioning your method, just what it actually does. Would I wipe the SIM contacts or the phones contacts?

  • When I share a link (URL) only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal?  Why can I only send to Apple machines?

    when I "share a link" (URL) using the pulldown menu in Safari, the email goes to all addresses I indicate, but only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal?  Why can I only send to Apple machines?

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Cannot get new ipad to message or facetime using my iphone number. Will only allow messaging and facetime with my email address

    cannot get new ipad to message or facetime using my iphone number. Will only allow messaging and facetime with my email address

    Using FaceTime  >  http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime
    iOS   http://support.apple.com/kb/TS3367
    About Messages
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755

  • Cluster with only two machines.

              Hi all,
              Can I make in weblogic6.0 a cluster with two machines. One Aministration and the
              other managed ?????
              regards, Juan.
              

    Is'nt there a restriction for running All WLS cluster machines on the same
              port ?
              Or is it just for the Mged Servers ...
              "Cameron Purdy" <[email protected]> wrote in message
              news:3d1e1d61$[email protected]..
              > Not exactly. You'll run a managed server on each of those on the same port
              > number, and on one of them you'll run the admin server on a different
              port.
              >
              > Peace,
              >
              > Cameron Purdy
              > Tangosol, Inc.
              > http://www.tangosol.com/
              >
              > "Juan Alonso" <[email protected]> wrote in message
              > news:3d1ca2d8$[email protected]..
              > >
              > > Hi all,
              > >
              > > Can I make in weblogic6.0 a cluster with two machines. One Aministration
              > and the
              > > other managed ?????
              > >
              > > regards, Juan.
              >
              >
              

  • I get a message saying backup failed on my Time Machine because backup disk image is already in use. I am the only one using this machine.

    My Time Capsule keeps telling me that backup failed because backup disk image is already in use. I'm the only one using this machine.

    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try a backup

  • MDB in two machines problem.

              Hi all,
              I have two machines one administration and the other managed. I have targeted a topic
              to the admin server, and i need to deploy a MDB in both server, How can i do it ?
              note: the topic cannot be deploy in multiple servers. I'm using weblogic6.0 sp2.
              When a client sends a jms message I need that only one MDB catch it. I think in cluster
              but i only have two machines.
              regards, Juan.
              

              Juan Alonso wrote:
              > Hi all,
              >
              > I have two machines one administration and the other managed. I have targeted a topic
              > to the admin server, and i need to deploy a MDB in both server, How can i do it ?
              >
              There are WebLogic extensions that allow specifying the JNDI URL and the connection
              factory name that an MDB uses. Not sure what they are named.
              >
              > note: the topic cannot be deploy in multiple servers. I'm using weblogic6.0 sp2.
              >
              > When a client sends a jms message I need that only one MDB catch it. I think in cluster
              > but i only have two machines.
              >
              Topic messages are replicated to each subscribing MDB pool. So if two pools
              subscribe to the topic, they will each get a copy of each topic message. If you
              want queue like behavior (no replication), replace the topic with a queue, or create an
              extra
              MDB that forwards a subscribption into the queue.
              >
              > regards, Juan.
              

Maybe you are looking for