Only appear 10 rooms in the tab "My rooms"

Hi experts,
I have a problem, when i visit my rooms, i see that only appear the last 10 rooms in the tab "My Rooms", Why? How can modify it?
Thanks in advance,
Regards,

hi capi,
u can refer this link for creationg of the last 10 rooms list
MYROOMS{private,restricted)
for more info
http://help.sap.com/saphelp_nw04/helpdata/en/8c/d79e420fc40b31e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0b/a00b6a7689194ea3e32b12df9a8458/content.htm
let me know u need any further info
ravindra

Similar Messages

Safari status bar disappears. I have tried clicking on show status bar and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page only full screen or close the browser. Any idea how the rectify this

Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?

One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.

If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right

If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right.

You can create a folder with the home pages by using "Bookmark All Tabs" to open a specific page.
You can place that folder on the bookmarks toolbar or use the Bookmarks menu button that you can find in the toolbar palette to get access to that folder easily.
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page.

Firefox 4 is stuck in classic mode. I went to the Add-on's and tried to change it, its the same no matter what I do, the only thing that changes is the tabs. Help.

I downloaded Firefox 4 because it looked great at school, it doesn't look the same I believe its stuck in classic mode. I went to the Add-on's and tried to change it, its the same no matter what I do, the only thing that changes is the tabs. Help.

To get the new interface you need to hide the menu bar. To do that in the View menu select Toolbars, then click on the "Menu Bar" entry. If you had applied customizations to the menu bar whilst using Firefox 3.6, the new version would by default use the old interface.
If you need access to the menus you can press either Alt or F10 to temporarily display them.

Search Bar : "Go button only appears when text in the bar"

With the new update they have made it so that the "Search" button in the "Search bar" only appears when there is text on it.
While probably a minor (in)convinence for most, it had become a browsing habit for me, to middle mouse click the search in an empty search to take me to "google.com" in a new tab (or whatever search engine was set).
I would like to know if its possible to tweak something in order to bring back the search button so it stays there.
I know there is easy workarounds for this (bookmark comes to mind), but having browsed like this for many years I would like to continue doing so if possible.
Thanks

Hmm, it takes a little doing, but I think so.
When the bar is empty, the code that generates the little image of the arrow has a new attribute set, which is hidden="true". There is a corresponding style rule to suppress the arrow when hidden="true". You can use a custom style rule to override the built-in rules, and apply it to the interface using either:
* Stylish extension ([https://addons.mozilla.org/firefox/addon/stylish/])
* userChrome.css file ([http://kb.mozillazine.org/userChrome.css])
This is a rule you could use:
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
searchbar .search-go-button[hidden="true"] {
display: -moz-box !important;
I have attached an image of how this looks when you create a new blank rule in Stylish, paste that in, and click the Preview button.

How do I keep the name tags in Picasa Web Albums from appearing on the images by default? With Explorer, name tags only appear when mousing over the image, but with Firefox, all the tags appear on the picture as soon as it is loaded, which looks messy.

I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

I use Picasa to create web albums, and I tag people who appear in the pictures. With Explorer, the name tags do not appear on the pictures until I mouse over a specific person, at which point the tag appears. With Firefox, the name tags appear as soon as the picture is loaded, and only disappear when you mouse over the people in the picture. This makes the picture look messy; by default, one would want to see a picture without tags all over people's faces.
The only way to "fix" this is to disable the name tags completely (or tell people to use Explorer!), but this is not an ideal solution, since I would like to be able to share albums with people's names in them.

Smart Shapes only appears if placed at the beginning of timeline or no more than 1.5 sec.?

Why is my Smart Shapes (Callout shape) only appears when published if placed at the beginning of the timeline or Timing > Appear After is set to no more than 1.5 sec in Captivate 6?

Welcome to the forum,
It helps if you mention the exact version, smart shapes are available in 6.0.0.199, 6.0.1.240, 6.1.319 and 7.
Try to post a screenshot of the timeline of the slide, using the small still camera icon available in the editor (browser version of the forums). With Elakat I suspect that you have a pausing point, caused by an interactive object, at 1.5sec.
Lilybiri

How can we make the Retake Quiz button only appear when user reenters the course?

In a Captivate 8 Quiz, we need to force the user to close the course (so attempts are captured by the LMS) from the Quiz Results page. The Retake Quiz button cannot show at this time. However, when the learner reenters the course from the LMS, the bookmarking brings the user to the Results page again. We need a Retake Quiz button to only show when the user reenters the course, not on Quiz completion. Disabling the bookmarking disables the reporting of attempts. Does anyone know a way to make that happen or a workaround?

Have a look at my blog post:
http://blog.lilybiri.com/review-only-incorrect-slides-captivate-6
Lilybiri

TS1368 The only appears when signing with the home sharing account

We could not complete your iTunes Store request.
The iTunes store is temporarily unavailable. Please try again later.
This message systematically appears on Windows 8 with latest version of iTunes when signing-in with the home sharing account, preventing any purchase. It is not a network issue since the message does not appear when signing in with my personal account which works in all circumstances.

Welcome to the Apple community.
Are you saying that your remote doesn't operate your Apple TV.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

I just updated my ipad with ios 6 but after downloading, it only appear ios 6 on the screen. What is the next step I should do?

can you guide me on the next action to proceed further.

Check what version here:
Settings>General>About>Version

What happened to the tab audio playing icon?

So, I have a lot of tabs open and as we all know some music starts on one of them. No problem, just look for the audio icon on one of the tabs, then close the tab or mute the audio. I look at my tabs and I do not see the audio playing icon on any of the tabs. Has that feature been removed? If not, can it be activated some kind of way? Thanks.

Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
You can close a tab with a double-click on that tab or via the right-click context menu of that tab.

Axis Field filter only appearing in Legend of Pivot Chart

I was referred here after posting the following on the Office Excel user forum (answers.microsoft.com) I hope I provide all you need, but of course I can provide further details if needed. I am on Windows 7 using Excel 2010.
Okay here goes! (thanks in advance for any direction you can provide)
I was creating a PivotChart where I wanted to be able to filter the chart based on the fields I dropped into the "Axis Fields (Categories)" areas section of my PivotTable. This was working fine until I added the filters as slicers, decided
I didn't like them, and deleted them. Now when I try to view the filter boxes, they will only appear as part of the legend. I do not want to show the legend as it has too many values. I would like to revert to the original behavior of showing the Axis Field
Buttons at the bottom of the chart, where they appeared originally (Without being associated with the chart legend).
Anyone know how to restore this behavior?
It works this way on other chart types, like line and bar. But it no longer works on the type of chart I wanted to use which is a Pie chart. I have opened new instances of Excel and tried to create a Pivot Chart Pie chart and get the same results:
the axis fields are associated with the chart legend, instead of being available independently.
Any help that can be provided would be appreciated
Thanks!!

I guess you may want to let the Pivot chart shows like the screenshot below:
If so, you need to add a new column(Equal to the field which you want to put into the AXIS field) to source data, then in the Pivot Table, put this field to the FILTERS .
This was working fine until I added the filters as slicers, decided I didn't like them, and deleted them
I don't think this operation you did would change any behavior. Perhaps you can upload this file to a file sharing site and then share the link with us.
Wind Zhang
TechNet Community Support

How do I get rid of the spinner that appears on the left side on the tabs?

(Firefox 25.0.1, Windows 8)
There's a little green spinner that appears to the left of "Connecting..." on the tabs while loading a page. Any way to get rid of it? It's been quite annoying me for a while.

You can manually create/edit the userChrome.css file. Here's how.
(1) Find (or create) the chrome folder. This is a folder in your currently active Firefox settings folder, also known as your Firefox profile folder.
* Open the your profile folder using: Help > Troubleshooting Information
** Windows: Click the "Show Folder" button
** Mac: Click the "Show in Finder" button
* Check for a chrome folder.
** If it exists: double-click it to open it.
** If it does not exist: create a chrome folder, then double-click it to open it.
(2) Create or Edit a userChrome.css file by adding your style rule.
* Check for a userChrome.css file in the chrome folder.
** If it exists: open it in a text editor. Check that it has this first line: @namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul); Then add the following lines and save the file: .tab-throbber { display: none !important }  
** If it does not exist: create a new text file named userChrome.css. (In Windows, right-click and choose New > Text Document and change the name to userChrome.css.) Then see the previous step for what to place in the file.
The rule change should take effect the next time you start Firefox.
Note: I find it easier to use the Stylish extension, but if you don't want yet another extension, then userChrome.css makes the most sense.

How can I make the Smooth Scrolling option in the Advanced menu apply ONLY to the tab bar?

So, I'm one of those people who usually have 60+ tabs open at any given time. I'm also on a Lenovo laptop with a trackpoint (that may be relevant later).
Right now, I have smooth scrolling disabled.
In previous versions of Firefox, if I sat my cursor on the tab bar and scrolled either up or down, it would scroll across my tab bar at a constant, quick rate, usually taking about two or three seconds to reach the end. This wasn't an animated scroll (I've disabled that animated scroll via about:config in the current Firefox version).
However, now, it's doing something different. There's acceleration to the scroll. If I just tap the scroll in either direction, it scrolls only a few tabs. However, if I hold the scroll for a second, it instantaneously takes me to the far end of the tab bar, completely skipping at least thirty tabs in between.
I have tab scroll buttons added by Tab Mix Plus (smooth scrolling is also not enabled in that addon), and the same accelerating behavior occurs there. One or two taps of the button moves the bar a few tabs to the left or right, but several taps in quick succession takes me all the way to the far end of the bar.
I can restore the old scrolling behavior for the tab bar by turning on smooth scrolling in the Options > Advanced menu, but that turns on smooth scrolling for web pages at the same time. I don't like the web page smooth scrolling, and would rather not have it on.
Or if there's any other way to make it so that scrolling the tab bar moves the tab bar a fixed amount no matter what, that would be great.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

Only appear 10 rooms in the tab "My rooms"

Similar Messages

Maybe you are looking for