Only available installation option may be Erase and Install

Trying to Upgrade Tiger.
The only option I get is "erase and install"
I've been trying to do this suggestion from Apple:
http://support.apple.com/kb/TS1471?viewlocale=en_US
Problem is I don't get the option to repair the destination drive when using the Leopard install Disk Utility. Only verify.
Note--I've done a repair on my Tiger Startup hard drive and then reboot, but it still doesn't work.
Any help.....?

Hmm dont know man? Just checked his post at work.
It was bought at the Apple Store like two days ago with the hologram type box. Have no idea if that helped.
Are certain disks bad or something?

Similar Messages

MBP Freezes (have erased and installed, ran disk utility, and inc fan speed

Hi Guys, Any advice on this issue would be very much appreciated please.
Have had an original mbp for about 2 and a half years. Last few weeks it's been freezing between 1 and 5 times a day. By freezing I mean that the screen freezes and there's no cursor or keyboard fuctionality. Sound stops too. This happens using World of Warcraft, Pages, Office for Mac, and Safari, sometimes also the finder. Main culprit though is Safari and WoW. For comedy value, I'm a priest in WoW and it froze during a raid which resulted in the whole group wiping out! Great timing! lol
So far I have:
Ran disk utility, repaired permissions and verified disk.
Did a complete erase and install.
Downloaded Fan Control and set to 3400 base speed, left fan @ 3503 RPM and Right fan @ 3508 RPM - temp reads 46.9 oC (118 oF)
I'm guessing that since my erase and install, that it is very much a hardware issue as the problem has happened again.
Since I've done the fan thing, nothing has frozen so far but I only did it about an hour ago.
If anyone could offer any other suggestions in case it does freeze again I'd be very grateful indeed :0)
Oh - one thing I don't get is that only about 4 hours after my erase and install I did the disk utility once more (Repair permissions and verify) and it came up with the below list - which is huge given it was a fresh install. Not sure if the below info will help (not really sure what it's for tbh - but there it is.
Many thanks,
Vizzy
Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/lanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanArrow.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanCheck.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/Resources/wanDisabled.png", should be -rwxrwxr-x , they are -rw-rw-r-- .
Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/AVC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/IIDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGAudioDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGLayer2AudioEncoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/Tundra.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/VDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AnnotationInspector.propPane/Contents/CodeResources ", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AudioSettingsInspector.propPane/Contents/CodeResour ces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/DataRefInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/HintTrackInspector.propPane/Contents/CodeResources" , should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/NetworkInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/SettingsInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/VisualTrackInspector.propPane/Contents/CodeResource s", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeComponents.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTimeJava/QuickTimeJava.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTime3GPP.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeH264.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/CodeResourc es", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeImporters.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeMPEG4.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeStreaming.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/QuickTime/QuickTimeVR.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.webplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QTKit.framework/Versions/A/Resources/QTKitIBPlugin.i bplugin/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Spotlight/QuickTime.mdimporter/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/Frameworks/QuickTime.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrwxr-xr-x .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Info.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa", should be -rwxrwxr-x , they are -rwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources/Localizable.strings", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/Resources", should be drwxrwxr-x , they are drwxr-xr-x .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/version.plist", should be -rw-rw-r-- , they are -rw-r--r-- .
Group differs on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be 80, group is 0.
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrwxr-xr-x .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .

According to Mactracker, your Mac could recognize 3 GB of RAM:
http://www.mactracker.ca/
One thing to check is your RAM usage while playing WOW. I am not a gamer, so I don't know if you can play with your Dock visible, but if you can, here is an easy way to keep track of your RAM usage.
Go to Activity Monitor (in your Utilities folder in your Applications folder) and put it in the Dock. Then while in Activity Monitor, go to View (in the menu bar)>Dock Icon and select "Show Memory Usage".
You want to see a lot of green in the pie chart. If you don't, you are running out of RAM and then the computer turns to your hard drive to fulfill the functions of RAM. This process is much slower, and I could see it resulting in freezes. If you find that the green virtually disappears while gaming, you could well benefit from upping the RAM by another 1 GB to 3 GB total.
Good luck!

Must erase and install as only option?

I've tried to install Leopard from DVD and received the message that the only install option is "Erase and Install". My mac info is
Machine Name: PowerBook G4 15"
Machine Model: PowerBook5,6
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.1f1
I don't understand why I can't install. Any ideas? Hints of alternative approaches?
Thanks in advance.

octafish wrote:
I hate to be nitpicky, but I'm fairly certain erase and install is always available as an option. Erase and Install may become the only option after a "bad install" but it's always available under options as far as I know.
You are absolutely correct. After the language screen there is an Option button on the lower left.
If you select it you will see the default is "upgrade" and the A&I and E&I are there, as well. It's a matter of attention to details. Leave nothing to chance.
If the install offers only erase and install, don't believe it. Find out why and fix it. It's only a problem to be solved.
Message was edited by: nerowolfe

No "erase and install" option only "customize"

I want to perform an "erase and install" but it won't give me the option to.
It only says "Customize"
Where did it go?

i think u may be right. which may also be why it doesn't allow me to log in. (just freezes whenever i put the RIGHT name/password in, if it's the wrong one it only allows me to try again)
Although, the iBook currently had 10.3.9.
there's also no "erase and install" option on my iMac that I'm trying to re-install. MAYBE cuz Tiger's already installed on there?? I'm using the disc that it came with.

HT1848 There is no "transfer purchases" button when I try to do this! My only option is to erase and sync... How do I transfer the music from my iphone without erasing it??

There is no "transfer purchases" button when I try to do this! My only option is to erase and sync... How do I transfer the music from my iphone without erasing it??

- You can only sync an iPod to one iTunes library/computer. You can however, manually manage music and videos among different libraries.
Go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
- If y wnat to switch syncing libraries/computer see:
go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
If all the synced media like music is in the iTunes library of the second computer it is very easy.

Lost applications due to "Erase and Install" option in Leopard Installation

I bought a new Macbook this morning at my local Apple Store, and they gave me a Macbook running Tiger as well as a Leopard Installation Disk. I wanted my Macbook to be just like new, so I called Apple Support and they told me to do an "Erase and Install." After I followed their directions and was finally running Leopard, I noticed that I lost programs: Garageband, iPhoto, and iMovie to name a few.
How can I get these applications back?
And it is absolutely ridiculous if I have to buy iLife '08 because I had these programs already on my computer with Mac OSX Tiger before Apple told me to "Erase and Install."
p.s. I received 2 other disks that seem to be of no help...2 Tiger Installation disks.

Ok if you purchased a new macbook reload the original os x tiger restore cd's you have to hold the c key at startup to boot from it format and reinstall mac os x tiger then once os x tiger is installed update to the latest version of tiger first then connect a external hard drive and use carbon copy cloner to backup your hard drive the reason for this is when you upgrade from tiger to leopard the os has a high tendency to remove the idvd and garageband content so none of your ilife apps will function after the upgrade this is why you need the external with it the first time you install mac os x leopard it will ask do you want to transfer your settings from another partition on this mac select this option and select the external and everything will be fine

MBP Early 2008 erase and install (bundled) additional iLife apps option

ok, can't figure this out. I have a MBP that I am going to reinstall everything using the factory 2 dvd set. I want to erase and install and install the original factory apps (meaning iLife). There is the option, when you boot up, to "install mac os X and additional apps." When you go through the process, you have to modify the install to erase and install, since there is a newer version of mac os x already on it. Then you proceed, when you goto customize (because I want to make sure the ilife extra stuff is checkmarked, it says there is a newer version already and thus won't checkmark those iLife apps as part of the install. Since I have chosen the erase and install option, shouldn't it know that and let those options be installed?
Message was edited by: powerbook1701
Message was edited by: powerbook1701

First, you must erase the drive. Do this:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

HD not an option to erase and install on

I have been working through a problem with my 1.5 year old Powerbook over the past few weeks. I was first told I had to archive and install but when I tried that an error message told me that the disk was too damaged. I got my hands on a copy of the disk warrior boot disk and was able to retrieve all the files I wanted to save, but the program was unable to rebuild the disk.
Now I am prepared to erase and install, but when it comes time to select a volume to install to, nothing shows up. (this is the third step of the install process, before I actually choose erase and install vs. archive/install). does erasing through disk utility make it possible to install OSX again without taking up all my space? are there any other options to look into before taking my computer to a store or something and getting the hard drive replaced?

Can you start/boot the computer from your hard drive boot volume?
If so, after the startup process is complete, go to Application > Utilities > Disk Utility.
Launch Disk Utility and select the hard drive at the very top of the drives and volumes window.
Under the First Aid tab, what does the S.M.A.R.T. status indicate at the bottom of the window?
If anything other than Verified, your hard drive is failing or has failed and needs to be replaced.
If the S.M.A.R.T. status for the hard drive is shown as Verified, quit Disk Utility and boot the compute from your Tiger install disc.
Select your language and at the Installer screen/prompt, navigate to Disk Utility via the Installer menu bar.
If you are unable to boot the computer from your hard drive boot volume, select the hard drive at the very top of the drives and volumes window and under the First Aid tab, check the S.M.A.R.T. status. If shown as Verified, you need to erase the hard drive using Disk Utility. Be sure HFS+ (or extended) is selected as the format with Journaling enabled.
When completed, quit Disk Utility and the focus will return to the Installer.
Try performing an Erase & Install again.

No Erase and Install Option given

So I am trying to do a complete Erase and Install from the Leopard DVD, but it doesn't give me this option when I boot up. It simply start reinstalling and keeps all my old accounts....What could be the problem?

Soon after you choose your language, the Menu bar shows up at the top of the monitor. Go to the Utility menu, select Disk Utility and format the drive you are trying to install to.
With no system to upgrade, the installer will default to a full installation.
Have you really backed up your Music, Pictures, Emails, and Documents?
Just Checking

Installing on G4 - no erase and install option

Hi all - really hoping someone can help me with this one.
I'm trying to install Leopard on my iBook G4. My current OS is 10.3.9. I've put in the Leopard CD and rebooted pressing C - I get past the screen where I can choose my language preference, but then I get an error message telling me Leopard can't install from 10.3.9 - it needs 10.4. I've been advised it will work if I do an erase and install, which I'm fine with - it's all backed up. BUT I cannot get to the screen where that becomes an option. The error message seems to be the end of the line - there are no further buttons to press to move on from that.
Has anyone else encountered this or have any bright ideas as to what I need to do next? From reading some of the posts here, other people seem to have installed Leopard onto slightly older macs so I am really hoping it's not impossible.
BTW I have 1.25GB of RAM and a 1.2Ghz processor, so that should all be fine.
Any help much appreciated! Thanks.

Hi clarrie123;
From the sounds of that error it sound like you are attempting to use an upgrade DVD rather then the generic install DVD for Leopard.
The upgrade DVD were issued with Mac that had Tiger installed after Leopard was released and are only usable on those Macs.
It sounds like you are going to have to purchase the generic DVDs to install Leopard on your Mac.
Allan

I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

To move a home folder, create a new home folder, copy the contents of the old home folder into the new home folder, and then delete the old home folder. Take a look at this link, http://manuals.info.apple.com/en_US/UserMgmt_v10.6.pdf

I was filling a form online, then I got to where I had to upload an Microsoft document but when I clicked on upload document I only had the option of uploading photos and videos, but not Microsoft doc. Please help.... How do I upload Microsoft doc related

I was filling a form online, then I got to where I had to upload a Microsoft document but when I clicked on upload document I only had the option of uploading photos and videos, but not Microsoft doc. Please help.... How do I upload Microsoft doc and other related office documents?

tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

Cannot load Photoshop Elements 10. 1st (of 3) disks only gives me option to import photos and videos, not to install. How can I install?

Cannot load Photoshop Elements 10. 1st (of 3) disks only gives me option to import photos and videos, not to install. How can I install?

Are you sure that:
1. You have the correct disc for your operating system? You have both mac and windows versions on the discs. If you have a mac you want disc 3, not disc 1.
2. PSE is not already installed?

Program installation after erase and install of Mac OS X.

Good day to you all,
A quick question to you Mac experts and enthusiasts. I am going to perform an erase and install on my 24" Aluminum iMac. I have numerous programs on my HD. If i copy them to an external drive and complete the erase and install, will I be able to just copy them back to my HD after, or will I need to reinstall them from the discs and .dmg files? Any help would be much appreciated on this topic. Thanks to all in advance for your time and input!
N8
Message was edited by: Nathan Barton

Nathan Barton wrote:
A quick question to you Mac experts and enthusiasts. I am going to perform an erase and install on my 24" Aluminum iMac. I have numerous programs on my HD. If i copy them to an external drive and complete the erase and install, will I be able to just copy them back to my HD after, or will I need to reinstall them from the discs and .dmg files? Any help would be much appreciated on this topic. Thanks to all in advance for your time and input!
*Hi Nathan, Welcome (Back)* to Apple's Users Help Users Forums.
Maybe I missed something—wouldn't be the 1st time—cuz I am surprised no one has suggesting making a clone prior to the E&I. You could then clone back your apps.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Purchase at $27.95 will allow smart backups that look at the bu files and only move over new ones. It's quick at ~7 mins to change ~1 gig out of 20.
Be sure to test that the clone boots and apps behave properly.
Here are other popular cloners.
http://www.bombich.com/software/ccc.html
http://www.prosoftengineering.com/products/drivegeniusinfo.php?PHPSESSID=909c070fb2e13b35097fa9cc1340bfc0
Good Luck, JP

I'm trying (unsuccessfully) to erase and install 10.4 on my iMac G5

After running into various bad experiences (apps quiting and app installers refusing to complete the task) I tried the usual fixits. I began with the Disc Utility and it repeatedly told me "1 HFS volume checked - Volume needs repair". After a little digging online, I opted to make the $100 purchase and got DiscWarrior. DiscWarrior said the volume and the hardware are fine now All is repaired. Soon after the problems reoccured. discWarrior again. All is fine. Problems soon follow. After a little more digging, I went to the last resort. I backed everything up and attempted an erase and install from the os disc that came with the computer. Now I'm getting a message telling me the installation was unsuccessful and to restart. I've gone throgh this hoop several times. Any thoughts?
I was running the 10.4.5 downloadable upgrade previous.

Although not definitive open Disk Utility, select the hard drive entry (the one with the mfgr.'s ID and drive size), then click on the First Aid tab in the DU main window. In the DU status bar note the reported SMART status. If it does not say "Verified" then the drive is failing and needs replacing. If it does say "Verified" then it's highly unlikely that the drive is bad. However, the drive may have developed a bad sector. If you're willing to continue the journey then try the following:
1. Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
After the formatting has completed quit DU and return to the installer. Now proceed with the OS X installation. After selecting the destination device click on the Customize button. Deselect items you don't require such as additional language localizations, Asian fonts. Only select the printer driver families you require for your printers.

Only available installation option may be Erase and Install

Similar Messages

Maybe you are looking for