Only available under linux?

Hello
I want to develop an application with J2ME CDC + Personal Profile + RMI OP. I was reading about this, and I understand that these libraries are only available under Linux. It isn�t?
Ussually I use JBuilder 9 under windowsXP. Can I do this application with it?
What VM do you recommend for the PDA?
Thank you
best regards, Nico.

Yes I saw the wireless toolkit, but I read:
"The Java 2 Platform, Micro Edition (J2ME) Wireless Toolkit is a state-of-the-art toolbox for developing wireless applications that are based on J2ME's Connected Limited Device Configuration (CLDC) and Mobile Information Device Profile (MIDP), and designed to run on cell phones, mainstream personal digital assistants, and other small mobile devices."
Then, it is based in CLDC. And I will need libraries that there are in CDC and in Personal Profile...
What can I do if I want to develop CDC applications under windows? I download the IBM�s tool called Websphere Studio Device Developer. It has the CDC configuration but not the RMI Optionoal Package, i read that is possible to update it, but didn found the way.
best regards.Nico.

Similar Messages

High availability under Linux?

Has anyone figured out the products necessary to do a fully
redundant Oracle system using Linux? I would like to have a
redundant server with immediate fall-over, but I'm not clear
whether or not this is available under Linux (I haven't found
anything to say that it is). Any pointers appreciated.
ssh
null

Oracle's text book answer to Disaster recovery is a standby
database. This database will not be available immediately but can
be operational in about 15 minutes or less after the loss of the
primary database. There is no additional software cost to
implement a standby database.
David Mansfield (guest) wrote:
: Steve Hultquist (guest) wrote:
: : Has anyone figured out the products necessary to do a fully
: : redundant Oracle system using Linux? I would like to have a
: : redundant server with immediate fall-over, but I'm not clear
: : whether or not this is available under Linux (I haven't found
: : anything to say that it is). Any pointers appreciated.
: : ssh
: I think there is a (free) product called 'fake' which has made
: some progress in this area. Check 'freshmeat.net'
: David
null

My mac's software is only available under my profile on MacBook pro. How can other family members get to the optional SW logged in under their own profile

Is there a way to share purchased SW under mote than one profile on the MacBook pro?
Thanks

If the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.

Option Profiler in "visualvm" tool not available under Linux ?

When starting Visualvm 1.0.1 under RedHat Linux
I get only the three following basics tools: overview monitor threads
it lacks : profiler
Is there any option to set to get the profiler tool?
( The same version works well under windows )

To get the profiler tab, monitored application must be running on JDK6. See VisualVM feature matrix at [https://visualvm.dev.java.net/features.html#feature_matrix]

Using JCOP tools under Linux

Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbie

newbie2007 wrote:Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbieEverything should work, except for the target pack and the non-existent Linux Pegoda driver.1. The is no seperate Linux distribution. You just need a Linux distribution for Eclipse.JCOP Tools plugin should work under Linux, except for the target pack and the non-existent Pegoda driver for Linux.1. There is no seperate Linux distribution. You just need the Linux distribution for Eclipse.
2. Prior to JCOP Tools 3.1.2 the last time something was mentioned about Linux was in the release notes of 3.1.1b . In version 3.2.0 IBM added a linux_support page to the JCOP Tools user guide (see release notes and linux_support page below).
3. There shouldn't be any problems with the generic simulation. The target pack runs only with Windows though.
h1. Release Notes
h2. Version
JCOP Tools 3.1.1.b (Bärlach)
h2. What's new?
h3. 3.1.1.b
<ul><li>New simulation (fixed static obj/arr bug, fixed instance field token bug).</li>
<li>Applet privileges can now be specified in the launch configuration dialog.</li>
<li>The "exportmap" feature is now available.</li>
<li>The JCOP Performance Test Demo ("JCOP Factor") is now included.</li>
<li>Minor bug fixes.</li>
</ul>
h2. Known problems
<ul><li>Simulations do not run (Linux, MacOS X)
     The Eclipse update manager does not set the execute permission bits for the simulations. You need to manually <code>chmod 755</code> those files in ECLIPSE/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.x/simuls/
</li>
<li>PC/SC Support (Linux)
     JCOP Tools only works with pcsc-lite 1.2.0.
</li>
</ul>
h2. Frequently Asked Questions
Please refer to the online FAQ at http://www.zurich.ibm.com/jcop/download/eclipse/faq/.
h2. Bug Reports
Please send bug reports to [email protected]. Make sure you include the following:
<ul><li>Problem description</li>
<li>Steps to reproduce</li>
<li>Eclipse version and build number (Help > About)</li>
<li>JCOP Tools version (Help > About; click on BlueZ icon)</li>
</ul>
h2. Using JCOP Tools with Linux (>= 3.2.0)
h3. ___
Overview
The current JCOP Tools release now also offer a version for the popular Linux
operating system. Both the Windows and Linux verson provide more or less the same
functionality, and JCOP application development can thus fully succeed on Linux systems.
Nevertheless, installation of the JCOP Tools differ between Windows and Linux
where the Linux version does not provide a simple installer as in case of Windows.
Additionally, the Linux version expects a properly setup Muscle PCSC installation
as soon as you want to use them together with physical, real cards. As Muscle
PCSC is still not shipped with most Linux distributions, you must download and
install them separately from the JCOP Tools.
h3. ___
Contents
h3. ___
Software Requirements
Linux distribution
The JCOP Tools simulation has been developed on a Fedora Core 6 system, but should also work in case of
many other recent Linux distributions.
Java Development Kit
The JCOP Tools have been developed and tested with the Sun JDK 1.4.2_13-b06
for Linux. Your success with other Development Kits may vary as there are
partly subtle differences across the different devlopment kits.
PCSC
The JCOP Tools use PCSC to talk with real cards on Linux. Most distributions
do not ship with Linux PCSC by default (Fedora Core 6 does), you must thus download it fromhttp://www.linuxnet.com
and install it by yourself. If you are used to software installation under Linux,
and are not afraid of compiling and installing software packages, this should
not be a hard problem. You have to download both the base PCSC package
(including PCSC daemon and client libraries) and separately the driver
for the reader you want to use. The PCSC package contains a test program
which should tell you whether your installation is set up correctly and
communicating with a card works. The JCOP Tools have been reported to
work together with Muscle PCSC version 1.3.1-7.
JPCSC
The JCOP Tools are shipped with JPCSC which you can also download athttp://www.linuxnet.com. JPCSC
is a JNI library which offers Java applications the access to PC/SC functions
by mapping their requests to an underlying native PC/SC implementation. The JCOP
Tools - mostly written in Java - thus depend on JPCSC to communicate with real cards
on Linux. JPCSC depends on a properly installed and setup PC/SC environment.
Especially, the JAVA_LIBRARY_PATH should list the directories where the
PC/SC client libraries and the native JPCSC library libjpcsc.so ( downloadable as binary from
Windows Binary Download Here )
are installed, the CLASSPATH variable should list th___
Miscellaneous
What should work
As soon as you setup your system correctly, there should only be minor differences
between using JCOP Tools on Windows or on Linux. Emulating a real JCOP,
debugging, shell, cap-file conersion should all be possible as in case of Windows.
What is missing
No drivers or tools are currently available for using JCOP30's in contactless
mode. If you need such support, please contact directly NXP
at for further assistance.
Copyright 2001,2007 IBM Corp. All rights reserved.
Edited by: lexdabear on Sep 28, 2007 4:13 PM (I hate the new edit)

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Certain Java methods only available on Tomcat, when logged in as a user

Certain java methods are only available in a Tomcat webapp, when the Tomcat server is started in a terminal window, while the user is directly logged into the system
When one of those methods are called from a command line app, for a split second an app pops up in the dock, even though no UI-method is called directly.
For example include a method like javax.imageio.ImageIO.createImageInputStream into a servlet inside a tomcat webapp and start tomcat through a ssh-connection.
The servlet will crash with following exception:
java.lang.NoClassDefFoundError: Could not initialize class sun.java2d.Disposer
javax.imageio.stream.FileImageInputStream.<init>(FileImageInputStream.java:82)
javax.imageio.stream.FileImageInputStream.<init>(FileImageInputStream.java:57)
com.sun.imageio.spi.FileImageInputStreamSpi.createInputStreamInstance(FileImage InputStreamSpi.java:37)
javax.imageio.ImageIO.createImageInputStream(ImageIO.java:331)
com.sage.utility.ImageUtil.getFormatName(ImageUtil.java:76)
When Tomcat is started from a normal terminal window, while being logged into Mac OS, the very same method works without a problem.
It looks like the problem only exists on Mac OS X... on Linux it runs without a problem under the same configurations
I just noticed, that when the user logs out, the server will remain active, but another exception is raised:
Can't connect to window server - not enough permissions.
It looks like the reason for this is a crooked implementation of the java api by apple.
Since it doesn't really work for us, doing all out administration though screen sharing, I would love to hear, that there is a way around this.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

How can I install InDesign under Linux?

Hello,
Because Microsoft stopped service for Windows XP, I changed the OS to Linux (currently Ubuntu to ease the change). A lot of software have alternatives under Linux, but I want to work with InDesign (currently CS6) furthermore. Is there a special (new) software version available directly from Adobe (I found only Win and Mac versions). Or is a script for Wine (or other emulator software) available? Thanks for any help or comment.
Micha

adobe makes no linux version of any of its software. you'll need to use a front-end like wine, WineHQ - Adobe InDesign

Is Translation Hub available on Linux ? [SOLVED]

We are using iDS 10gR2 and iAS 10gR2 on Linux. Is Translation Hub available in iDS 10gR2 on Linux? or is it only available for Windows? I can not find it under my iDS installation? I also can not find the Translation Hub documentation under iDS documents? Searched OTN & Metalink and only documents I found are Oracle Notes and a 30page pdf file, dated 2002 for 9i version. Please advise.
thank you
Message was edited by:
zaferaktan
Message was edited by:
zaferaktan

ooops - found the Oracle note #284035.1 and it clearly states that Translation Hub is not available on unix. Sounds like we need to purchase another copy of iDS 10gR2 for windows if we want to use the Translation Hub? Maybe it is time to call OPN to check what we gonna do with this constraint.

Resin version under Linux?

How can you find out the version of Resin you're running under RH Linux, assuming you didn't install it yourself?
Ditto with MySQL Server.

Hi Guillaume,
As you've noticed, _CVI_ is not defined when you compile under Linux.
You're right, there is very little documentation on which of the CVI predefined macros are available in Linux. We'll be sure to add this to the documentation. In the meantime, these are the macros defined by cvicc, to the best of my knowledge:
_NI_unix_ = 1
_NI_linux_ = 1
_CVI_DEBUG_ = 1 (debug builds only)
NDEBUG = 1 (release builds only)
_CVI_C99_EXTENSIONS_ = 0 or 1 (depending on project option)
_TARGET_FILE_VERSION_ = a.b.c.d
_TARGET_PRODUCT_VERSION_ = a.b.c.d

Running database control of a remote 10g database under linux

Hi,
I have a question. I installed oracle 10g on my windows PC as well as on a remote server which is on linux. For both the databases, I can run DatabaseControl by entering a similar kind of URL in my browser (just server name is different, all other parts of URL are same).
Now, when I tried to run the DatabaseControl for some other oracle 10g servers (also under linux), I am getting the error "The page cannot be displayed". This means that the services to run database control are not available on the remote server. Can someone please tell me what setups and services are required on those servers so that I can run their DatabaseControl from my PC's browser. (Please give me the step-by-step instructions of what needs to be done on remote
servers) - Thanks.

But that does not explain why emctl does not exist. Existence of emctl file is not dependent on whether DB Control is created on or not.
Whether you ticked using DB Control or not, the Server is installed with Enterprise Manager by default. You do not need to run OUI to create the Database Control (Db Console). You only need to run emca to create the dbconsole.
But the problem here is that they cannot see emctl. Which brings me to the question of whether they are actually on the right ORACLE_HOME or box
If the Database was installed in the Linux box and the client on the PC, the emctl should be on the Linux box and not on the PC. If you have more than one ORACLE_HOME, then you need to ensure you are on the correct ORACLE_HOME

Problems with dbx under linux

Hi everybody,
I'm using Oracle Solaris Studio 12.2 under Linux, and i'm trying to debug a Fortran application with dbx.
When I use it to step through the code, there always pops up a messagebox that says
dbx: internal error: cannot convert 'AGGREGATE' to 'ARRAY' ...
dbx: internal error: cannot convert 'AGGREGATE' to 'ARRAY' ...
dbx: internal error: cannot convert 'AGGREGATE' to 'ARRAY' ...
dbx: internal error: cannot convert 'AGGREGATE' to 'ARRAY' ...
too many errors
after a random number of steps (perhaps after about 10 steps). Then, the execution stops, and I'm forced to restart the process, with a breakpoint somewhere further down the code.
Does anybody know what I could do to prevent that from happening?
Thanks in advance,
Christoph

Hi Isaac,
thanks for your reply. I'm using the debugging from the studio.
Unfortunately, the code I'm working on is a CFD program of some 100.000 lines, and I think I'd have to post the whole thing. I've been trying to reproduce the problem with a model program, but to no avail: dbx/SunStudio works like a charm with every program I write myself.
It is definitely a problem with evaluating local variables: If I watch a debugging tab different from "variables", it doesn't crash; neither does it while stepping through the main program. It only crashes somewhere deep in some modules, where pointers on big allocated arrays are passed around in the seventh or so stack level. Anyway, it seems to be more a problem with the code than with a particular debugger: I've tried gdb, and it shows similar problems.
Regards,
Christoph

Loss of keyboard focus in Java appl running under linux

I have a small sample program that replicates my problem. When this program is run a window is created. If you select File->New another instance of the program window is created. Now if you try to go back and bring to front the first window, keyboard focus is not
transferred when run under linux. You can only type in the second window. The expected behavior does happen in Windows.
> uname -a
Linux watson 2.6.20-1.2933.fc6 #1 SMP Mon Mar 19 11:38:26 EDT 2007 i686 i686 i386 GNU/Linux
java -versionjava version "1.5.0_11"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_11-b03)
Java HotSpot(TM) Client VM (build 1.5.0_11-b03, mixed mode, sharing)
javac -versionjavac 1.5.0_11
import java.awt.event.*;
import javax.swing.*;
class SwingWindow extends JFrame {
    SwingWindow() {
     super("SwingWindow");
     JMenuBar menuBar = new JMenuBar();
        JMenu fileMenu = new JMenu("File");
        JMenuItem newItem = new JMenuItem("New");
        newItem.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent event) {
          SwingWindow.createAndShowGUI();
     fileMenu.add(newItem);
        menuBar.add(fileMenu);
        setJMenuBar(menuBar);
        setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
     JTextField text = new JTextField(200);
     getContentPane().add(text);
     pack();
     setSize(700, 275);
    public static void createAndShowGUI() {
        JFrame frame = new SwingWindow();
        frame.setVisible(true);
    public static void main(String[] args) {
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

You can implement the FocusListener interface. When
the first JFrame gains focus, call
text.requestFocusInWindow(). I hope this helps.The call requestFocusInWindow is not helping, perhaps even making it worse.
The problem seems to be that I am in the situation where the call
KeyboardFocusManager.getCurrentKeyboardFocusManager().getPermanentFocusOwner()
is returning the expected Component. The problem is that the KeyListener class that is registered with the Component is not being called when a key is being pressed.
The issue is that I have a component that has the keyboard focus, but the KeyListener class
is not responding.
This seems to be a linux only problem which makes it only mysterious.

Cannot install JMF under Linux Mandrake 10

I simply cannot install JMF under the Mandrake 10 Official Linux distribution. I downloaded the jmf-2_1_1e-linux-i586.bin file and tried to execute it as root. It unzipped some files then showed me an error message about AWT and GTK+. I found a hack consisting of modifying the .bin file to have the PATH variable point to SUN JDK, the error does not show up, but the installation still does not work. In fact, the installation works, but the Diagnostics applet keeps telling me than class files are not present. My Mozilla 1.6 Java plugin is working and displaying the applet. My JMF lib directory does not contain sound.jar, such jmf.jar. I set the CLASSPATH and LD_LIBRARY_PATH according to the readme.html file. I would like to know if it is a compatibility problem with Mandrake 10, the 2.6 kernel or if JMF just DO NO work under Linux. In the latter case, JMF is a violation to the Java portability philosophy and I would never use it on my own initiative, just if I were asked to.
After the files are unzipped, I have the following warning and error messages.
Warning:
Name: HorScrollBar
Class: XmScrollBar
The specified scrollbar value is greater than the maximum
scrollbar value minus the scrollbar slider size.
JavaSound Capture Supported = true
JavaSoundAuto: Committed ok
java.lang.Error: Can't open video card 0
java.lang.Error: Can't open video card 1
java.lang.Error: Can't open video card 2
java.lang.Error: Can't open video card 3
java.lang.Error: Can't open video card 4
java.lang.Error: Can't open video card 5
java.lang.Error: Can't open video card 6
java.lang.Error: Can't open video card 7
java.lang.Error: Can't open video card 8
java.lang.Error: Can't open video card 9
Done.
Even if I do not have a working video capture card (I have an ATI All-in-Wonder 128 but it is not working under 2.6 kernel), JMF should work because some people do not have a video capture card. I also tried with the cross-platform ZIP file, but this one does not contain sound.jar either and the Diagnostics applet keeps complaining about missing class files. I tried to search on the Web for solutions to this problem or for a way to change the CLASSPATH used by the Mozilla Java plug-in (if it uses a different CLASSPATH than the one from the environment variable), but nothing, nothing. Is there a distribution from which JMF would work better than Mandrake 10? Or can JMF work only under Microsoft Windows or Sun Solaris? I also tried Blackdown, but a README file directed me to the Sun's page, nothing to download here about JMF.

well, your not the only one.
I have it working in Debian, and JDS.(JMF is setup automatically in JDS).(2.6.6 kernel)
I looked at the installation structure of JDS, and was able to duplicate what they did for Debian.
Maybe it will work for Mandrake two??
ok, all you have to do is copy or create soft links from your Mozilla directory, just like you did with the java plugin, and link to all the *.so files in JMF-2.1.1e/lib directory.
Should work.
I also read that not haveing the native files only matters if you are doing Capture. not play.
to get your ATI All-in-Wonder 128 to work, make sure you install the correct driver, and have it working under linux, then try it in JMSTUDIO

HT4623 i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind. i paid for some aps and they will not open wit

i am trying to update my Ipad 1 but it tells me i have no updates available under my general settings. i talked to someone on the phone yesterday and they said my software version is 2 updates behind. i paid for some aps and they will not open with my cu

You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

Only available under linux?

Similar Messages

Maybe you are looking for