Only balance in local currency
Hi
our base currency is UDS. One of the GL ( bank account in Germany ) is set up as document currency ( euro ) and " only in local currency " check box is unchecked ( FS00 , control tab ). Now when I try to load the plan data into system, all the values goes well except this GL. I used manual entry to load the value (Gp12 ) into this GL (plan ).It did not work.
Now I tried to change the check box ( FS00 ) but it does not allow as there is balance into that. First I am not clear why this one account was set up like that.Can anybody suggest me how to fix this "only local currency" issue.
Thanks
Satya
Hi Satya,
Since you have created the g/l account with account currency EUR and which is different from your company code currency (USD) it will only accept the postings in EUR. If an account is set up in company code currency then it will accept postings in all currencies. Usually bank accounts are maintained in currencies other than company code currency and in this case I am not sure why you have created a P&L account in currency other than Company code currency.
The indicator "Only balances in local currency" controls the display of balances via FS10N transaction and if you have unchecked that indicator then system should supposedly display the balances by transaction currency but in your case since, your account currency is EUR and the g/l account can only accept postings in EUR it doesnt really matter because it will only display balances in EUR since all the postings going to the above account will be only EUR.
As far as ur problem is concerned; looks like u r loading numbers in currency other than EUR and that is why it is bombing out. You have to zero out the balance in the account first and then have to change the account currency to USD if you want to plan in diff currencies on that account.
Plz assign points if useful
Thanks
Kumar
Similar Messages
-
Only Balances in local currency
Hi,
By mistake we activated only Balances in local currency setting for a GL account at the time of Go-live. Also we had done postings to this account with foreign currency and local currency. Now we want to do foreign currency valuation for this account, but the problem is up to now all the transaction are recorded in local currency only because of the reported setting to GL master, so system is not finding any valuation differences for foreign currency transactions.
What can be done to update the transaction currency balances for the posted line items without reversing?
Is there any program to update the balances in transaction currency as well?
We have many line items in that GL account which have to be revaluated.
Experts, please give me the suggestion.
Rgds
Murali. NHi,
Please check the below OSS notes:-
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1431450]
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=327591]
Regards,
SDNer -
F.05 and "only balance in local currency"
Hi Dear,my client like to do F.05 (foreign curreny valuation) for all balance sheet account,but if you select "only balance in local currency" in GL master,then those GL accounts can not be picked up for F.05.
SAP's suggestion is :
*For normal balance sheet accounts that record neither items in foreign currency nor open items, SAP recommends that you record the account transaction figures in local currency only. You should select the "Only balances in local curr." checkbox to do this*
But if i want do f.05 for all balance sheet account,i should not select "only balance in local currency" in GL master,am i right?Hi,if you want do so then do. But do realy going to book all accounts in foreign currency???
-
GL Master - Only Balances in Local Currency
I am curious when to check the 'Only Balances in Local Currency' (OBILC) box on a Open Item GL. I've read information from multiple sources and interpret that it should be set on all OI accounts with a few exceptions like recon accounts for vendors and customers. In my past experience OBILC was checked for most open item accounts but the company I'm currently with has the opposite logic. With the box not checked, the clearing is process is quite complex and time-consuming. We are on the classic ledger in 6.0 and have companies in multiple local currencies with group currency of USD. Just looking for input because I'm doubting my interpretation of when to check this box.
As an example, the GL would be an AP accrual account with postings in multiple doc currencies. The company code local currency is MXN, and Group Currency is USD. Should the OBILC be checked?
Any input is appreciated.Hi,
'Only Balances in Local Currency' (OBILC) is used when you do not want any foreign excange difference to be posted at the time of clearing. When this indicator is active, then the balances in database tables are updated in local currency only and thus the clearing can happen in local currency only.
In your below example scenario, you can chosse not to activate this check OBILC, if your company is not interested in doing foreign currency valuation difference posting.
Regards,
SDNer -
Open item mgt and only balances in local currency
Hi ,
What is open item management and only banlances in local currency ?
for which gl accounts v select open item management and only balances in local currency
Pls explain urgent
Regards
umesh1. Only Balances in Local Currency:
Indicates that balances are updated only in local currency when users post items to this account.
Use: You would set this indicator for accounts in which you do not want the system to update transaction figures separately by currency.
It is required to set theis indicator in:
1. cash discount clearing accounts
2. GR/IR clearing accounts.
It cannot be set in reconciliation accounts for customers or vendors. Setting it in all other instances is optional.
Open item management:
Determines that open items are managed for this account.
Explanation: Items posted to accounts managed on an open item basis are marked as open or cleared. The balance of these accounts is always equal to the balance of the open items.
Procedure: Set up accounts with open item management if offsetting entries are to be assigned to the postings made to these accounts. Postings to these accounts represent incomplete transactions.
USE:
A goods receipt/invoice receipt (GR/IR) clearing account should be managed on an open item basis so that you can check at any time whether invoices have been received for the goods received for an order.
Set up accounts without open item management if no offsetting entry is to be made against a posting to this account.
Accounts that are managed on an open item basis include:
Clearing accounts:
Bank clearing account
Payroll clearing account
Cash discount clearing account
GR/IR clearing account
Accounts that are not managed on an open item basis:
Bank accounts
Tax accounts
Raw material accounts
Reconciliation accounts
Hope this is helpful. Pleas assign points if it is.
Julia -
Relation between 'only balance in local currency' check box and OBA1-KDF
Hi,
in the master data of the GL account, the check box 'only balance in local currency' should be unchecked it to set that account as Valuation account, i.e in the OI exchange rate defferences?
or , if the account takes only in local balance also set as valuation account in OBA1-KDF
Thanks...Hi Yogesh,
Thanks for your quick replay, i use this transaction code "OB_GLACC12" when i was save it showing Error Message like
"You want to save your changes. They will take immediate effect for all objects chosen. This action cannot be undone."
0000115405 // 3130 : The data contains error, you cannot save Message No.FH511
0000115405 // 3130 : Changing the balances in local currency not possible; acct has a balance Message No.FH085
0000115405 // 3130 : Keep balance sheet accounts in local currency only Message No.FH132
Can you help me how to change the Only balances in Local Currency Check box.
Thanks,
Bhaskar. -
Impact of only balances in local currency in business consolidation
Hi,
We are doing business consolidation based on classical GL
and extracting data for consolidation from GLT3 table.
In some cases we are not getting the transaction currency
amount for certain GL Accounts in GLT3, it is giving the same amount as Local Currency.
Is it a impact of tick only balances in local currency, if so
how do we go ahead correcting it.
Thanks in Advance
PhutaneHi,
Remove the Tick mark 'Only Balance in Local Currency' in the master record.
This should solve the issue.
Regards,
Satish Pasumarthi -
FS00 Only balances in Local Currency Check box
Hi Sap Gurus,
FS00 in that there Only balances in Local Currency Check box i want to remove the check box,but in that g/l account we have balances how to remove the check box.
I have a one solution
post the account to zero balance, uncheck the flag, post the old account balances again.
I know this answer but is there any other way or any program is available in SAP
If anybody knows please suggest me
Thanks In advance,
BhaskarHi Yogesh,
Thanks for your quick replay, i use this transaction code "OB_GLACC12" when i was save it showing Error Message like
"You want to save your changes. They will take immediate effect for all objects chosen. This action cannot be undone."
0000115405 // 3130 : The data contains error, you cannot save Message No.FH511
0000115405 // 3130 : Changing the balances in local currency not possible; acct has a balance Message No.FH085
0000115405 // 3130 : Keep balance sheet accounts in local currency only Message No.FH132
Can you help me how to change the Only balances in Local Currency Check box.
Thanks,
Bhaskar. -
Remove tick Only balance in local currency
Dear Experts,
One of my Balance Sheet GL Account has a tick Only Balances in Local Currency and I want to change the properties of GL Master by removing the tick since the same is to be taken in Valuation Program.
I have made the balance NIL of the Account but still I am not able to change the properties of GL Master and get a Message no. FH085.Request you to kindly advice on the same.
Regards,Dear:
Please check FS10N on FBL3N for local currency for closing balance to some GLs and nullifying the balance. if there is any. If local currency is 0, only then you can switch off balances in local currency check box in FS00.
Regards -
Enabling "Only balance in local currency" for GL's
Guru's
Can any one help me on this.
We wanted to enable bhe "Only balance in local currecy" for certain GL's. The GL's already has some balance.
We have an option to make the balance zero by using a clearing account and trasfer it back once it is enables. But our problem is.
a. We are not sure whether these changes will have retrospective effect - that mean will it effect all the entry booked when it was not enabled.
Please advise
DeepakDeepak,
a)first you can make the balaces 0 of the g/l accounts to which accounts u want uable the field only balances in local currency.
b)goto OBD4 and select account groups of that g/l accounts and suppress that only balance local currency field.
Reward points.
Regards,
Rams -
To activate ' only balances in local currency'
HI,
As this issue is very common but I did not got any specific solution So I posted this issue.
I want to transfer balance in foreign currency to other GL, system asks the GL to post Exchange diff.
As this GL is of bank reconciliation I dont want to calculate ain or loss on this GL.
I found relevant Field only balances in local currency in GL master. Is this correct field?
We are using 3 GL for bank Incoming Out going and main. Do we need to tick this field for all the GLs?
There is some balance in the GL even if I need to transfer balance to other GL it will ask this config So I cant transfer balance.
How Can I tick this?
Regard's,
DeveshDear suja:
It is possible to select only balances in local currency for the accounts which have balances.
Select the standard report, Enter the GL Accounts and currency type. i.e you can view the accounts in local currency.
Ex: for GL Account balances, select the standard report S_ALR_87012277 - G/L Account Balances,Enter Chart of accounts,GL Accounts,Company code,Account currency as USD for USA or INR for India.
you can view the accounts in local currency.
Please let me know if you want more information.
Assign points if useful.
Regards
MSReddy -
GL account char - XSALH "Indicator:Only Manage Balances in Local Currency"
Hello experts,
Regarding transaction FS00 or FSS0, i would like someone to give me a clear view of the utility of value field XSALH "Indicator: Only Manage Balances in Local Currency".
When creating a GL account, from a technical perpestice, in which case i should activate this flag and in which case i should not activate it ?
What are the different impact for the user, except the fact that balances are updated only in local currency ?
Thanks in advance,
Nicolas GORECKIHi
If the indicator Only Balances in Local Currency is selected in the master record, transactions figures are only managed for amounts translated into local currency.
You should select this field for clearing accounts where you want to clear accounts by assigning items with the same local currency amount with one another, without necessitating exdchange rate difference postings.
The indicator must be set in cash discount and GR/IR clearing accounts. This should not be activated for Reconciliation accounts for customer and vendors.
This indicator is usually set in balance sheet accounts that are not managed in foreign currencies.
IF this indicator is not set, to clear the open items, both the local and foreign currency amounts of the items to be clared must match. In such a case, it may be required to post an exchange rate difference postings. -
Balances in Local Currency GL Account Setting
If I check this flag for a GL account and do the following what will happen:
1) Go into FB50 for a USD based company code
2) Set the document currency to CAD
3) Post to that same account with the Balances in Local Currency Flag checked off
Also when and why would this ever need to be checked off for an account?Hi,
If your company code currency is USD and you are posting few documents in CAD in April for. e.g. total amount for the month of April in currency CAD is 25,000 then
1. If "Only balance in local currency" selected
You will not be able to see balance in CAD in FS10N for the month of April
1. If "Only balance in local currency" not selected
In FS10N you will be able see balance in CAD currency separately for the month of April.
Try it out. -
Only balances in local curr.
Dear Friends,
What is the use with "Only balances in local currencies" setting in GL master?
Please explain me clearly
Bye
N.M.Bdear Friend
Indicator: Only Manage Balances in Local Currency
Indicates that balances are updated only in local currency when users post items to this account.
Use
You would set this indicator for accounts in which you do not want the system to update transaction figures separately by currency.
Setting this indicator for accounts managed on an open item basis affects the clearing procedures. See the example below.
Procedure
Set the indicator in cash discount clearing accounts and GR/IR clearing accounts. It cannot be set in reconciliation accounts for customers or vendors. Setting it in all other instances is optional.
It is usually set for particular balance sheet accounts including:
Accounts which are not managed on an open item basis and not kept in foreign currencies.
Accounts which are managed on an open item basis and have the same types of items posted in different currencies, but always allow clearing to be made if the local currency amounts correspond.
Examples
You set up a clearing account for goods receipts and invoice receipts and manually post these items to it. You post invoice receipts in the invoice currency and goods receipts always in the local currency.
Invoice receipt 1000 DEM 600 USD
Goods receipt 600 USD
Both items can be cleared if the clearing account balances are recorded in local currency only. If you have not set the indicator for this account, the system will translate DEM to USD during the clearing procedure in order to determine the amount in USD required to clear 1000 DEM. If the translation rate is .65 USD per DEM, then the system displays 650 USD for the invoice receipt and 600 USD for the goods receipt when the open items are processed.
This means that to clear both of these items, you will also have to enter a difference posting for 50 USD, and the system will automatically make an additional exchange rate difference posting for this amount.
Jain -
GL account balances in local currency
Hi,
We have 10 set of books starts from aus ind uk us france......
we have 3 consolidated sobs asia ,europe and us consolidate sobs
under asia we have india,china,korea and under europe france,italy and under USA us sob.
now our requirement is that we should develop a report with gl account balances at consolidated sob and local sob's.
I have done with the USD currency but i need some clarification is that how can i get the amounts in local currency which has come to consolidated sob.
Can any one send/give me link about this type of process.
Thanks,
MHi,
If your company code currency is USD and you are posting few documents in CAD in April for. e.g. total amount for the month of April in currency CAD is 25,000 then
1. If "Only balance in local currency" selected
You will not be able to see balance in CAD in FS10N for the month of April
1. If "Only balance in local currency" not selected
In FS10N you will be able see balance in CAD currency separately for the month of April.
Try it out.
Maybe you are looking for
-
Itunes won't open, even after reintallation
itunes just quit working. I uninstalled, shut down the PC, then reinstalled. It all looks good during installation...the wizard works fine, but when you try to launch you get nothing. It won't open from the shortcut on the desktop, or the program
-
i need to update my iphone 3g 16GB present version 3.1.2 to update new version how can i update
-
Duplication of Records in Address Book on iPad Sync
I have multiple records which have been duplicated in my Address Book on my desktop Mac; I believe it has arisen since I have been synchronizing between desktop and iPad. How can I eliminate these duplicated record entries and stop this duplication?
-
Some of my apps on my ipad open but become very small and i cant use them
Some of my apps on my ipad open but become very small and i cant use them Has someone encounter thsi problem? Any solution?
-
Dear experts Below is my company scenario, We did the GR in reference of PO in Dec. but now we received a Debit note (stated 1 material is free of charge). SAP only allow us to post LIV followed by Debit note. but the problem is that vendor only gave