Only boots to windows after using bootcamp

Hello,
I tried using bootcamp today and installed Windows 8. My machine now only boots to Windows 8, but without any network support (just to make life more difficult) and I have no access to OS X. I have used the Windows computer manager to view the disc partitions and these seem right and what I expect.
Is there something that would allow me to change how my mac boots, or can anyone offer any advice? The machine is only a couple of weeks old and so all drivers and operating system is up to date.
Thanks.

MarkMB wrote:
Hello Bob,
Thank you for your quick reply. I didn't download anything. I went to the Apple site and watched the video to see how it is done and then to Boot camp assistant, where I choose a fresh install of Windows. The option did say Windows 7 or later! I didn't know Win 8 is not supported.
Now I have a Win 8 install and for the most part it seems okay - just need to be able to install a network driver!
You must download the Windows Support software then after booting into Windows you must install the downloaded software. This software includes the Bootcamp Windows drivers (including the network drivers). But, there are no Windows 8 Bootcamp drivers http://support.apple.com/kb/HT1899.

Similar Messages

How can i change back to os after using bootcamp

Hi, Im the proud owner of a early 2008 mac, I installed windows 7 on my mac using bootcamp. I wanted to clean up my mac by resetting it, there was nothing I really wanted to keep so thats why I wanted to reset. I went to the setting screen you know the one if you can choose when your starting the mac. I had 2 disks one with os x one with windows after using bootcamp you can seperate your disk in 2 new ones. But after I deleted the one with os x, I was ready to re install os x mountain lion. It seemed to work but after restarting my mac, I couldnt change to os x anymore. And cant remember my password for windows and cant even get a new password (Im supposed to have a password disk for windows or something like that?) So Im really stuck here.
Can you help me please?

Try rebooting with the Option key depressed and see if this brings up the bootable devices which includes OS X which you can then select to boot from.

Installing Windows 7 Using bootcamp 5.0 on MBPr OSX 10.8.2 Black Screen Not Loading Windows 7 Install on Boot

I am trying to install Windows 7 using Bootcamp Assistence 5.0 on a MacBook Pro Retina OSX 10.8.2, I went through all steps on Creatting the Windows 7.iso into a bootable USB Dirve 16GB I use a separate USB Drive 2 GB and download Windows Support Drivers Step 2 on bootcamp assistence. I run into the problem in step 3 when the computer reboot I just get a black screen the back display still on like I can still see the apple on the back lit up, but the screen is black and wont load the window installer, if i shut it down and bring it back up i get error saying IOS not found so then i have to shut it down, enter recovery and restart on osx partition, i can see that the bootcamp partition was created but cant load windows to it. Please can anybody help me or guide me on what i am doing wrong? thank you so much in advance

this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this?

Have to restore OS X.9.1 after booting into Windows 7 on Bootcamp

I am having an odd problem--whenever I boot into Windows 7 on bootcamp, when I then boot into Mac OS X.9.1, I have to restore the disk from Time Machine. This has never happened before, but now has happened twice in a row. It takes hours for the Restore function to restore everything. Anyone have any idea as to why this is happening. My MacPro dates to 2010. Thanks.

Windows is a guest on your Mac. If you use Windows tools to change the partition Map, or the size of any partition, all Mac OS X partition information is trashed, and you will need to restore it before proceeding.
Otherwise, you should be able to hold down Alt/Option key at Startup, and select your Mac OS X Volume to boot from (after several minutes of discovering what Volumes are present).

After updating Macbook from OS 10.4 to 10.6.8 it only boots to windows xp not Mac OS

After updating Macbook - Mac OS from 10.4 to 10.6.8 it only boots to windows xp even when selecting start up disk as Mac HD
Even option C says select drive. Mac selected still goes straight to windows?
Any suggestions?

Is it a retail (universal) 10.6 disk or one that shipped with and was installed on another Mac model?
DALE

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

BSOD in Windows XP using bootcamp

i bought a 24" imac back in november and successfully installed windows xp using bootcamp 2.0 at that time. Windows XP ran great everyday (no problems) until about 2 weeks ago when I starting getting the blue screen of death (BSOD). This was occurring with Bootcamp 2.0 and Windows XP SP3.
I went back to the MAC OS side and deleted the windows partition, then recreated the windows partition ... then reinstalled Windows XP (with SP2) ... then updated the Bootcamp app on Windows XP to version 2.1 (according to the documentation this is necesary BEFORE installing windows SP3) ... then i installed SP3 and all windows security patches.
The computer will boot into Windows XP fine but will only run for about 15 to 20 minutes before giving me the BSOD ... The Stop Error on the Blue Screen is 0x0000007F (0x0000000D) ... I have no idea why this started 2 weeks ago.
According to the documentation this error relates to corrupt RAM, mismatched memory modules, or a malfunctioning motherboard ... or could occur if the system is trying to overclock the speed of the processor.
Is this a hardware problem with my iMAC? or is it a bug in bootcamp?
I have no idea what to try next.
Is anyone else having this or similar problems? If anyone can help me solve this they are a saint.

so far so good. after uninstalling Norton Internet Security 2008, Windows XP has been running for over 40 minutes with no blue screen of death crashes
you are a godsend crazy Irving
The Windows stop error was REALLY MISLEADING making me think it was some sort of hardware (memory or motherboard) problem
Thanks again for taking the time to respond.

Installing Windows 7 using bootcamp help

Hi all,
I am planning to install windows 7 using bootcamp to play PC games only, as love mac software for everything else, and want to make sure that all will run smoothly before i buy the required stuff.
I am running OSX 10.8.5 on my iMac, which has a wireless keyboard, wireless trackpad, and wireless mouse, and a connected external superdireve (for CD's and disks, sorry to patronise just wanting to be clear ) and wanted to know if i can install windows using a disk that i buy in a normal pack, as i have heard that the external drives can have problems?
All advice much appreciated!

this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this?

I can't boot to Windows after resizing my Mac partition.

So, I recently decided to resize my bootcamp Win7 partition. This is something I have done successfully before, by:
1) Booting into Macintosh
2) Using Disk Utility to decrease the size of the Mac partition (20GB the first time)
3) Booting into Windows
4) Using Mini-Tool Partition Wizard (third-party) to allocate the free space to the Bootcamp partition.
There were a couple issues caused by this the first time around, mainly the fact that Macintosh didn’t recognize the fact that the free space had been taken, and had trouble reading from the Windows partition. However, I could live with that. I have since rebooted to both Mac and Windows several times without problem.
Recently, I decided I needed a bit more space, and so started to follow the above steps, shrinking the Mac partition an additional 15GB. Only when I went to reboot to reallocate the space, the Windows partition didn’t show up as a bootable option. Confused, I booted back to Mac, and the Bootcamp partition was still there, but renamed “disk0s4”, and unmounted. Reparing the disk failed (“Invalid BS_jmpBoot in boot block: 15921e”). The disk wouldn’t mount (not even sure if it was supposed to be mounted earlier, but that’s what it looks like). It also appears grayed-out in the list of drives to the left. It looks like I can create a dmg from the windows drive, although I haven’t done that yet (I will soon).
Any solutions for this? Although I will erase the drive if absolutely necessary, it would be preferred if that wasn’t the first option to try. I had no problems like this the first time I resized the disk.
(My mac partition is running Mavericks, if that is of any relevance)

These steps correct the Partition ID, and the boot ability of the MBR partition that has Windows on it.You can type '?' for help in the following steps where you set the fdisk prompt.
To fix the MBR, in OSX Terminal
sudo fdisk -e /dev/disk0
setpid 4
07
flag 4
p
w
y
q
Please ignore the i386 message that you see in the following. Here is the set of commands in the utility. The utility starts at partition id 1. If you see any other messages, please post back.
sudo fdisk -e /dev/disk0
fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> ?
help Command help list
manual Show entire man page for fdisk
reinit Re-initialize loaded MBR (to defaults)
auto Auto-partition the disk with a partition style
setpid Set the identifier of a given table entry
disk Edit current drive stats
edit Edit given table entry
erase Erase current MBR
flag Flag given table entry as bootable
update Update machine code in loaded MBR
select Select extended partition table entry MBR
print Print loaded MBR partition table
write Write loaded MBR to disk
exit Exit edit of current MBR, without saving changes
quit Quit edit of current MBR, saving current changes
abort Abort program without saving current changes
fdisk: 1>

HT4407 Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?

Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
Regards Swishi...p.s If anyone can help me...it'll make my day :3.

ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

How to install windows 8 using bootcamp with no optical drive

Hi,
I have a mac book pro 17" late 2011 with Mountain Lion installed.
I have previously installed a windows 7 using bootcamp without an optical drive by creating an install disk as part of boot camp option.
I still don't have an optical drive.
The other day I removed my Windows 7 since I want to try Windows 8 but when I try using boot camp to install windows 8 it is asking for an optical drive and the option to create an install disk is not available anymore.
Any idea on this issue?
Thanks much

Windows 8: enable Hyper-V, it really helps.
http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/
http://www.windows-now.com/blogs/robert/hyper-v-3-0-confirmed-for-windows-8-clie nt.aspx
http://www.windows8update.com/2011/12/06/enabling-hyper-v-in-windows-8/
http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems
http://www.howtogeek.com/107173/disable-windows-8s-adaptive-brightness-to-fix-da rk-screen-problems/
It should be straight forward and no different, except you are burning an ISO and that always needs to be done at slowest burn speed for any version of Windows.Otherwise it won't work (even if it manages to install it will fail on restart or some other point).
Windows 8 Release Preview
http://msdn.microsoft.com/en-us/windows/apps/default
https://blogs.msdn.com/b/b8/?Redirected=true

How to have two partitions in windows 7 using bootcamp?

Hello everybody,
I've just recently bought a new MacBook Pro, I'm not very familirar with Macintosh. I installed windows 7 using bootcamp but the problem is that I just can see one partition in which I've installed windows.
actually, I want to partition my 500GB disk to three different partitions as following:
1) 70GB for Mac
2) 80GB for Windows
3) 350GB for Data
so that I can have third partition both in Mac and Win.
I searched internet and I found a few documents about it and I followed the instructions but I had no luck of success. one of the instructions I tried is: http://davidseah.com/index-ee.php/wikilab/Creating-2-Windows-Partitions-with-Boo t-Camp/
Any suggestion would be appreciated.

1: Those instructions at the link are severely outdated. Don't use them.
2: Apple expects users to have one Bootcamp partition, one OS X Lion partition and that's it and that's all they are going to hold your hand on.
(note: there is also a hidden EFI and a Lion Recovery Partition also on the drive.)
Anything beyond that is getting into major geek terror-tory.
Of course it's possible, I had my 15" with 7 partitions and booting 4 other operating systems from Lion, Snow, Windows, Linux (with a Linux Swap and a exFAT data). But I had to wipe the entire drive, set up the partitions install a alternate EFI boot program (a program that resides in firrmware) and then install each OS in each partition.
Since your new to Mac, you should really hold onto Apple's hand and use either a external drive formatted either FAT32(MSDOS) for under 4 GB files sizes (preferred) or exFAT for over 4GB files (not preferred but necessary) in Apple's Disk Utility.
Windows is as you know, formatted NTFS and OS X is formatted HFS+ Journaled as their partition data formats.
There is software for Windows called MacDrive which will read and write HFS format, and there is software from Tuxera that will allow OS X to read NTFS format.
There is a security issue allowing Windows to read HFS, but that should do transferring the small amount of files your going to be using in both operating systems.
OS X, like Windows, is going to expect files to be in each respective User folders of Music, Pictures and so forth when you open save dialog boxes, open finder windows, open certain programs and so forth. So ideally it's not best to share a partition or really have the user data on another partition at all.
I know it's a practice on Windows machines to partition data away from boot/programs to reduce defragmentation, on OS X it's not as necessary (except in special cases) as all 2GB sized files and below are written to one space on the drive (if there is room of course)
Windows 7 still needs to be defragged, however it can be schedualed and you can watch the progress. If you install WIndows, perform all the updates, then install programs, then finally any files you do keep there, it should stay optimized for a quite awhile. Ditton on the OS X side.
If your going to sharing a grreat quantity of files between the two OS's, use a external drive.
Apple installs a hybrid MBR in the Bootcamp partition for Windows to use to interact with the GUID partition table (GPT) it uses.

Multitouch drivers for Windows 8 using Bootcamp?

Macbook Pro
Retina, 15-inch, Late 2013
Processor 2.3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris Pro 1024 MB
Is there any drivers that will enable multitouch on Windows 8 using bootcamp? The problem I often run into occurs when I attemp to click with one finger and move a file with another finger. On OSX this works flawlessly making it so simple to move around files.

Did you download and install the Windows Support software in accordance with the Boot Camp instructions? If so, you have a Boot Camp Control Panel icon ion your Windows task bar. Open the control panel and set your trackpad options how you want them configured.

I want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

"At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
Personally I would double these amounts and add to that the diskspace needed for your Windows games.
Stefan

Bluetooth Mighty Mouse & Windows XP using Bootcamp

Are there plans to add functionality for the bluetooth mighty mouse in Windows XP using bootcamp??
Macbook Pro Mac OS X (10.4.7) I run Bootcamp, as well as OS X

I was able to get it to work in Windows XP. I was not using Boot Camp since I have a IBM ThinkPad T41p, but it should work the same.
See my How to Setup Wireless Mighty Mouse with Windows XP post.
Power Mac G5 Dual 2 GHz Mac OS X (10.4.7)

Only boots to windows after using bootcamp

Similar Messages

Maybe you are looking for