Only Display if StartsWith is not True

I'm trying to only display fields that do not start with a zero.
I played around with the formula below, but it of course returns a bunch of blank rows because of my "". Any help or suggestions would be GREATLY appreciated.
if {field} startswith "0" then "" else {field}

I used section expert to supress rows where
{Field}=""
Probably not the best way to do it, but it worked!

Similar Messages

I have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id

i have an ipad and a iphone 5, when i start find mi iphone from the ipad or in the iphone only display the iphone, but not mi ipad it displays with conection, ubication not avaliable, i configure the same apple id in bot devices, and a diferent apple id, can help me?

IOS: using facetime http://support.apple.com/kb/ht4319
using an ipad will use the email address since you can't make a phone call. see the link.
Your basically calling/emailing yourself that's why your getting a busy signal.

TS2771 on i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

On i pod touch the orientation does not change when I turn it on it's side when using safari etc. When viewing youtube it only displays widescreen and will not display portrait , anyone any ideas? is this a fault or do all ipod touch do this?

The user guide says:
Movies viewed in Videos and YouTube appear only in landscape orientation. Street views in Maps
also appear only in landscape orientation.
Do you have the scree orientation lock turned on? If on there is a circular arrow icon with a padlock inside next to the battery charge icon in the upper right.

TS3694 My Iphone 5S (imei :013886000503612) only display :Capble and disc , not use anything! What can i do now? i had Itunes 11.4 for recovery but fail complete! How can i do it?

My Iphone 5S is DEAD (only images Cable and disc)/. My imei : 013886000503612. I had try use itunes 11.4 for update an recovery but about 99 % itunes display :The iphone "iPhone" could not be restore>An unknow error occured(3). what can i do now? im living at Vietnamese! Help me!

Think whath happens if I do 300 mb in roaming in a few days
You can turn off roaming in the settings... General... Network
I know this doesn't explain what is happening, but it will put your mind at easy when on holiday.
Get in touch with Apple, call them and ask.
This should not be happening.
I am interested in knowing what you learn.

When I export an email as a PDF it only displays the sender details not the content

I normally export any email I wish to save as a PDF, for some reason a tax receipt I've just received, when exported as PDF, displays only as the sender's details, i.e. name, address, date sent etc.
I've tried saving as RTF and converting but when it converts to PDF it moves the formatting around so figures aren't in one column anymore. Has anyone experienced this and solved it? Thanks.

I normally export any email I wish to save as a PDF, for some reason a tax receipt I've just received, when exported as PDF, displays only as the sender's details, i.e. name, address, date sent etc.
I'm seeing the same, when I try to export as PDF. It looks like Mail were formatting and scaling the mail like formatted in the Browser Window and all content is on the following pages of the document. So a simple Mail will be spread across several PDF pages.
I get better results when opening the mail in a separate window (⌘O) and then using the "Print" button in the toolbar of the window. Then I can access the settings for the paper size and ensure it is A4 and the paper handling settings and enable "Scale to fit".
Then click the "PDF" button to save to a PDF file.

Projects only display single row when not in fullscreen

Hi
I've just updated to 3.4.5 an coincidentally used fullscreen for the first time so I'm not certain which action has caused this.
After exiting fullscreen, my Projects(and thumnails in the browser) no longer display in a grid but as a single row that dissapears off the right side of the scrren and cannot be scrolled.
Additionall the thumnail size slider and other controls that should be in the bottom right have dissapeared
Fullscreen still works fine both in projects view and browser.
I was wondering if anyone else has experienced similar behavior or can point me in the right direction.
Things trie so far:
Check other libraries (all the same)
Repair Library (no difference)
Rebuild Library (No Difference)

This may be a problem of an unreadable Aperture preferences file:
Try the following:
Remove the Aperture's user preferences from the User Library as described here:
Aperture 3: Troubleshooting Basics
Note:
Your User Library is hidden by default in 10.7.5 - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
Quit Aperture, if it is running. Log off and on again.
Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
In the widow that will open, scroll down to "Preferences"
From the "Preferences" folder remove "com.apple.Aperture.plist".
Then try to launch Aperture again.
But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
Regards
Léonie

Blu Ray video disk will only display on W500 screen, not on attached screens

My W500 (Win7-64bit) plays blu-ray disks perfectly on the W500's screen. But it will not play on an attached 1600 x 1200 DVI monitor, either attached through a mini-dock, or via the DisplayPort and a DVI convertor adapter. In both those cases, WinDVD 2010 (which I purchased to replace WinDVD 8 provided) says "Your display environment does not support protected content playback" WinDVD 8 gives exactly the same message. The same Blu Ray drive plays DVD's perfectly to the 1600x1200 DVI screen. Anyone understand what the problem might be ?

Hello,
I saw your reply in this five year old thread asking about HDCP.
HDCP is short for High Definition Copy Protection. It means the devices at both ends (video card, monitor) must support encrypting the signal between them in order to prevent digital copying/piracy.
Regards,
Aryeh Goretsky

My email is only displaying the header and not opening

When I get my emails from the server(Comcast) it only shows an unopened header. I have to double click on the email to open it then it opens to a page that states that "only the headers for this message has been downloaded from the server" and I need to double click on "Download the rest of the message" in blue.
Is there a setting to fix this?

IMAP mail accounts download headers and then when you select an email it will download a copy of the folder to a temp folder to make it quicker to get emails.
If you sychronise the folder then it will download a copy of the folder into Thunderbird profile. This folder will keep synchronizing to update the Thunderbird with what is on the server. When you move, delete etc any emails they will be moved/deleted off the server as the folders are one and the same and they synchronise to reflect changes.
* https://support.mozilla.org/en-US/kb/imap-synchronization#w_synchronization
then scroll down to section:
'Configuring synchronization and disk space usage'

IPad only displays mail title but not content of message... if i hit "reply" the message will appear. It just started doing this!

This just started. I have to pretend to reply to the messages to get them to display!

Try these steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Why item button only show #APP_IMAGES# image but not #WORKSPACE_IMAGES#?

Hi All, I have a item button with Button display attributes - Style as Image. I don't know how come it can only display #APP_IMAGES# image but not #WORKSPACE_IMAGES# image. Please help... Thank you in advance. :)
Chris

Hi All, I have a item button with Button display attributes - Style as Image. I don't know how come it can only display #APP_IMAGES# image but not #WORKSPACE_IMAGES# image. Please help... Thank you in advance. :)
Chris

Only display first form URL in formsweb.cfg . mutiple URL does not work

Hi Friends,
I have 4 form application with 4 URL.
app. server as 10g in window 2003.
URL like as:
http://salerpt.com/forms/frmservlet?config=emis-srmenu
fmx file Location as C:\OraMid\forms\salerpt-Forms fmx name as srmenu.fmx in same directory
fmb file location as C:\OraMid\forms\salerpt-Forms_source fmx name as srmenu.fmb in same directory
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
in formweb.cfg file
baseHTMLjinitiator=basejini.htm
workingDirector : workingDirectory= blank. but C:\OraMid\forms\salerpt-Forms right now
# Forms runtime argument: which form module to run
##form=test.fmx
## i moved bottom section of form section in here and before
##line as Forms runtime argument: database connection details
comment two line
#jinit_exename=jinit.exe
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
I create 4 sections as
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Information System (SIS)
form=regsale.fmx
form=salefinincial.fmx
form=rptinfo.fmx
However it only display first srmenu form interface that i put in( 4 different URL. only display first URL)
It seems that one formsweb.cfg, it doesn not support multip form setting application.
I have 4 small forms application with 4 URL for one formsweb.cfg.
What should I need to do? I think that i miss some set up in configuration.
I am waiting for your help!
JIm

Hi Bgrant,
Please review my formsweb,cfg.
Thanks
I am looking for your help.
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory= C:\OraMid\forms\sales-Forms
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
#form=test.fmx
[[srmenu]]
form=srmenu.fmx
width=1200
height=700
pageTitle=Sale Management Information System
[[regsale]]
form=regsale.fmx
width=1200
height=1500
pageTitle=Sale Management Information System
[[salefinincial]
form=salefinincial.fmx
width=1200
height=1300
pageTitle=Sale Management Information System
[[rtpinfo]]
form=rptinfo.fmx
width=1200
height=1000
pageTitle=Sale Management Information System
# Forms runtime argument: database connection details
userid=scott/tigerd@oracleapp
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
#width=750
width=1024
# Forms applet parameter
#height=600
height=768
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
#jinit_exename=jinit.exe
#Version=1,3,1,22
# Parameter related to the version of JInitiator
#jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_sales.com_0Axxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# Single Sign-On OID configuration parameter
oracle_home=C:\OraMid
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group, orclApplicationCommonName=formsApp_sales.com_0A4911717Fxxxxxxxxxx, cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=False
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle

In IPhoto '08, Photos under Library, I'm no longer able to view a screen of thumbnails. I'm only able to view a single photo at one time. This was not true in the past.

In IPhoto '08, in Library/Photos, I'm no longer able to view a screen of thumbnails. I'm only able to view a single photo at one time. This was not true in the past.

Note the slider lower right of the iPhoto Window. Drag it left.
Regards
TD

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

TS2167 I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

Just in-case anyone els runs into this, I figured it out... I was working from my hotel and apperantly the fire wall was not allowing anything to uplaod, but I wasn't getting an error message from iweb, it would say that everything was published succesfully even though it wasn't. Once I went home and used my connection eveything worked fine.

Only Display if StartsWith is not True

Similar Messages

Maybe you are looking for