Only edit objects from package ZPACKAGE in local requests

Hi Experts,
I was adding a secondary index to a Ztable present in a package ZPACKAGE. When I tried to save in a workbench request, I got the error message "You cannot use request XXXXXX". I then created a local change request where the target system is not mentioned in the transport request. I was able to save the index and later I mentioned the target system. When I tried to release the transport request, I get the message "Only edit objects from package ZPACKAGE in local requests". Kindly suggest what can I do save the changes in a transport request and release it.
Thanks

Check out the transport layer and target system for that transport layer. As someone suggested, talk to your basis.
This is most common when you have the actual table in temp folder but the index stored in Zpackage.
I would first check my objects package to make sure that they are in right package. If everything @ right place, then i will check the package transport layer and software component then check the 'use access' of the package. if the package is good then check the transport path and target systems for each transport later.

Similar Messages

Error : Only edit objects from package ZSD in local requests

Hi Experts,
We are modifying all Z-programs to unicode enabled programs in ECC6.0 Upgradation. While doing this we are not able to save it as a transportable request. It displays error as "Only edit objects from package ZSD in local requests".
So can anyone tell me how to save it as a transportable request.
Thanks,
Ranjith C.

Hi,
two ways:
1. change the transport type: create transport type copy in se01 and copy all mentioned objects to that transport
2. better way: correct development class and transport layer
case a. target system was not definied (not known to TMS) or is empty
case b. source system (original system for objects) not known to TMS
case c. objects assigned to local package (former local development class)
etc.
If you don't understand this explanation, just use one of Z transport layers showed in stms, by changing the transport layer in the definition of the package (se80) to shown in STMS (link name from source to targed system)
Kind regards,
Mirek

Transport error: "Only edit objects from package CL in local requests"

I have made changes to an SAP original program as per Note 1096366 on SAP's service web site. The program is an Include program (LCLCMFMZ). I have assigned it a transport number, but it keeps trying to make the target local. When I change the target to DEV, it will not transport and I get the following error:
"Only edit objects from package CL in local requests"
Does anyone know what this error means?
Thanks.

Thanks Nick,
but I think I have figured it out. I needed to create a transport of copies (from se09) and include this object in that transport (right click and choose 'Include object...'). Then back to se01 and display all transportable object (including transport of copies). Then select my transport of copies, choose a target system (from double clicking and going to properties). Only then would it let this object get transported.

Edit objects from package ztms in local request

Hi ,
I am checking Inconsistancy check for a Transport Request, it showing error as , " Edit objects from package ztms in local request.". can anyone please help me in resolving this error.
regards,
Govind Nagotla

Hi,
the reason may be, that development class ZTMS has an invalid or unknown transport layer in table TDEVC (look at field PDEVCLASS), or the whole class is unknown in your system, if the object comes from a foreign home system!
Regards,
Klaus

Only edit objects from package in local requests

Hello Experts,
could you help me please
a user has tried to transport a local request, I modified it by putting the target system, but when the user wants to release it, he gets the error massage "Only edit objects from package in local requests "
Thanks a lot

HI
Follow the steps.
1. Create a new transport request
2. Select include objetcts
3. Object list from request and select your tranport request
4. Release the Transport request and transport.
If don't work try this other case:
1. Run tcode SE01
2. Create a new "Transport of copies"
3. Into the request, choose menu "request/task -> object list -> include objects
4. Include your transport request
5. Add the target system and release the request.
If you get any error put here
Regards
William Neira

Error "Only edit objects from package /VIRSA/ZVIR in local requests"

Hey, SAP gurus,
After I applied OSS note 1149445 in our Dev box to fix the bug in program /VIRSA/ZVFAT, I had problem to realease the transport. I got the error u201COnly edit objects from package /VIRSA/ZVIR in local requestsu201D.
u201CObjects in package /VIRSA/ZVIR cannot be edited in transportable Workbench requests in the current Dev system. The transport routes are configured such that objects from package /VIRSA/ZVIR can only be edited in local Workbench requests.u201D
What can I do to release the transport and move it to our QA box?
Thanks in advance!
Fisher Li

My co-worker and I followed SAP instruction on this one and solve the issue.
We created a "transport of copies" by using Transaction SE01. Go to the request overview and choose Request/task -> Object list -> Include objects to include the "child transport number of my transport" in this "transport of copies". Add the target system and release the change request.
Thanks!
Fisher Li

Import only one object from transport request

Hello,
I have a transport request with some programs. I've not imported this request yet. And I would like to import only one program or just look at its source code. Is it possible with help of any standart SAP functionality?
Thank you in advance,Sergey.

Hi,
Go to SE10 and display the transports for your username. Select the task number (not transport no.) and hit display object list icon. There you will see all the objects in the task. Hit change button and you will see delete icon enabled. You may select the objects you do not want to transport and delete it from the task.
Version > 4.6C may have different screens but still the functionality is available
Raj
Reward points if helpful

Transfer object from package $TMP

Hi gurues,
I need trasnfer objects in $TMP package to another new pakage (because I need transport them)
Can someboy explain me (as detailled as possible) how create a new Order Request /Package
and how transfer fromt $TMP to the new ?
Thank you very much!!!

Hi,
If you want to create new Package then go to SE80 T-code and create there.
To create new request go to RAS1-- Transport - select Object type -Select the object which you want to transport-select Transferred selection - before that give grouping and collection mode-there you will have option called Package select that and give your package after that it will ask you to create request.select create and give discretion and select save button.
Transporting : Go to SE09 and transport task first and then transport Request.
Ali.

Display ERP object from business context of service request

Hi Experts,
I have a requirement to display a custom business object in ERP from the business context tab of the service request. The custom business object is added as a link to the service request. The display of standard BOR object works fine, but for the custom business object, when the user clicks on the link nothing happens.
I am using CRM 7.1 (CRM 7.0 with EHP1) and ECC 6.0, no EHPs.
Thanks in advance
Prabhas

If you are using JWSDP 1.3, here is how you can do it. However this is an internal API, specific to Sun's JAX-RPC implementation and may change in the future. Anyway, here is how you do it.
If you service endpoint implements javax.xml.rpc.server.ServiceLifecycle interface, then you can keep a copy of javax.xml.rpc.server.ServletEndpointContext in init() method. In the actual method invocation, you can obtain javax.xml.rpc.handler.MessageContext from the ServletEndpointContext. And then invoke getProperty on the message context to return HttpServletRequest as follows:
HttpServletRequest request =
(HttpServletRequest) messageContext.getProperty(
com
.sun
.xml
.rpc
.server
.http
.MessageContextProperties
.HTTP_SERVLET_REQUEST);
Hope this helps.
-Arun

Ojects from Package cannot be transported

Hello,
When I try and release a transport request, I get the following message.
Objects in package ZXI cannot be edited in transportable Workbench requests in the current system DXA. The transport routes are configured such that objects from package ZXI can only be edited in local Workbench requests.
the configuration of the transport routes must be corrected in the Transport Management System (TMS).
Kindly help me add this package to the transport routes.
Currently the Transport layer in STMS has name ZDXA.
Please advise.
Thanks.

While creating a package you have to specify teh transport layer.

Multiple object is not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"

Can you help someone to get multiple object using "Edit Objects" from "Acrobat X Pro" to "Photoshop CS5"? Refer below:
Selecting the multi object (Acrobat X Pro):
Click Edit Objects => Displays below option, click OK:
Opened only one object instead of above multiple selected - in Photoshop CS5
Thanks in advance,
Pasumalai J

Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai

How to remove an object from an article

Hi all,
newbie here, sorry. I searched this forum for an answer, but I couldn't find it. So here it is....
I created a folio with 3 articles. After changing something I always update the article. But sometimes it will upload not only all objects from that article to the digital publishing site, but also objects (files) that are in/from another article. In my case I used a video in article 1, I changed something in article 3 and I updated article 3 to my folio. When uploading object (files) for article 3, I spotted the video I used in article 1!! This video doesn't belong in article 3, I don't use it there. But it will enlarge article 3 quite a bit and with this my entire folio will become much larger, which is completely unnecessary!
Is there any way to delete parts(/objects/files) from an article that are not really used in the article? Without affecting the rest of the (working) article of course....
Any help would be appreciated!
Ton Janssen

Hi there,
this seems to do the trick....I put all the HTML files and supporting documents etc for one article in a separate folder and now it seems to work well.....thanks a lot for your help!
Ton Janssen

Deploy an Integration Object from 'Local' Tools to Siebel Server

Hi,
I have created a Integration Object on my Local Siebel Tools.
What I would like is to 'Deploy' this Integration Object from my Local Siebel Tools to the Server database..?
& How to do this? Clicking Deploy to RunTime database only deploys to my Local, rather than the server?

Hi,
In tools from 'View' menu select 'Options' there you will find 'Object explorer' tab
click on it there you will find just check the box and it will be visible.

How do I export my edited images from my iMac to an external hard drive? Only the originals transfer.

How do I export edited images from my iMac Lightroom 5 programme to an external hard drive? It seems that only the originals transfer.

In the export dialog don't choose original. Choose specific export settings for your purpose e.g. for a website, emailing or for printing.
You can choose jpeg, tiff etc and also select the size you need, sharpening and quality - click image below which shows an example of exporting jpegs in the sRGB color space.

How do I move objects from other package to a newly created one?

How do I move objects from other package to a newly created one?
Thanks!

Dear Anthony Pham ,
for changing objects from one package to another package
open that object for example Report
open the report and than click GOTO select OBJECT DIRECTIORY ENTRY
than it will open a popup in that popup click the change and give the new package
Thanks
Surendra

Only edit objects from package ZPACKAGE in local requests

Similar Messages

Maybe you are looking for