Only exporting 9 seconds. URGENT HELP

Hi
Iv edited a boxing fight and want to export it to upload to the net - its 3.50 long but when i export as a quicktime movie it just exports the first 9 seconds. Iv tried other projects again and they export fine and fully.
There is no mark in and mark out or anything on the sequence in the bin. i havnt changed any settings i have just edited as normal. Tried restarting the comp. tried different custom exports. nothing works
Need to get it on by tonight please help!

Try exporting using the first quicktime export option with current settings. Make sure the resulting file is complete either by bringing it back into fcp or opening it in quicktime player. if everything's ok, bring it into compressor and use one of the appropriate presets for the web.
But I'm suddenly wondering if there's a more basic problem. Please tell us the format of your clips and your sequence settings?

Similar Messages

Export using quicktime conversion only exports 23 seconds of my project...

Hi,
I am trying to output a promotional video to .wmv format using the quicktime conversion. It only exports 23 seconds of footage before stopping, which is no use at all.
Whats wrong?
I have tried setting ins and outs around the video, and I have tried selecting all the content in the timeline, but nothing seems to help.
Thanks.

DOC EDITOR wrote:
Thank you, very much. The cost of the flip version needed is only $49 so that is not bad, but why would you actually need something extra when the conversion option is available in Final Cut? I would understand if the option did not exist at all and the flip 4 mac would make the option available.
Not on mine. I had to buy a third party product to do that.
AFAIK, the ability to be exporting to wmv is not included with FCS or Compressor or QT. If it appears in your options, you may have installed another app that includes the transcoders and codecs.
Microsoft and Apple do not cooperate in the format wars, neither will support the other and there's money involved. It's a shame becuase Flash is whacking both of them stupid and Silverlight is even kinda cool. QT's days are probably numbered.
bogiesan

FCE only exports 29 second of video

Newbie here! I am trying to export a video sequence that has no markers and FCE will only export 29 seconds of video. I am exporting Using Quicktime Conversion file format Window Media. Then only 29secons of video is on the file that is created. This happens on several different sequences. I have cleared all markers but that did not help. Is there a preference that I need to change? Have I changed something that I should not have?
Thanks for your help.

Hello and welcome to the forum.
It sounds like you're using the trial version of the QuickTime plugin which will only convert 30 seconds of media. You'll need to buy the full version; I think it's $50.
http://www.telestream.net/flip4mac-wmv/overview.htm

5 Minute video - But only exports :30 seconds...Help Please!

It's my first project on Final Cut Express HD. When I export it to a Quicktime movie, it exports the complete 5 minute video. When I export it using quicktime conversion to wmv. it only captures the first 30 seconds or so of the video.
Why is this happening? What can I do? Any suggestions?
Thanks for your help.

welcome,
sounds like you have the demo version of flip4mac, unless you pay for the complete version it will only allow you to export 30 seconds.

Quicktime Pro exporting to WMV -- only exports 30 seconds?

Have 7.6.6 PRO and am exporting to WMV. But I only get 30 seconds of video? Any ideas?

I am having a problem with this as well. In Quicktime Pro, when I try and export a 4:49 length .mov into a .wmv, it will only give me 4.30. Why would it cut me off? At first I thought maybe the machine hic-upped or something during the conversion but I have attempted it several times and no matter what I do, I can only get 4:30 in length.
I have Quick Time Pro and Flip4Mac WMV Studio Pro HD and have spent hours going through the FAQ’s and discussion forums on both sites and can’t find anything about a time constraint once you have purchased the “paid” versions......HELP

Will only export 30 seconds of 21 minute sequence?

Hello,
I am trying to export a 21 minute sequence using Quicktime Conversion to a Windows Media File so I can upload it onto the clients .mac account. For some reason it will only export the first 30 seconds of the sequence? I have made sure everything has been rendered FULL and my audio has been mixed down.All is solid blue in the top of the timeline. There is a 16 frame dissolve where the conversion stops but it is also solid blue. I have repaired permissions and re-booted.
Any advice will be appreciated.
Peter Mallamo
www.reeladventure.net
Mac Pro 2GHz Dual Intel, G4 733 MHz & PowerBook G4 1.25GHZ-2 Gig RAM Mac OS X (10.4.7)

Sounds like you've downloaded the demo version of Flip for Mac. Unless you pay for the program, it will only allow you to convert 30 seconds.
rh

InDesign crashes continuously when trying to export into PDF - Urgent Help!

Hello All,
I'm facing the issue like InDesign is getting crashed continuously when trying to export directly the PDF, I'm using InDesign CS5.5. Please suggest urgently.
Thanks,
Praveen

Gejaraja wrote:
I tried with script, but later assumed it's crashing even doing manually using File -> Export.
Sorry, that's terribly unclear.
Is it crashing with BOTH the script and File > Export?
Is your script using exportFile or asynchronousExportFile?
If it crashes manually, have you tried disabling asynchronous exports per Re: Background PDF export Help?

URGENT HELP master export setup

URGENT HELP master export setup
Hi,
I tried to search in the forum before I sent this request and I did not find my answer.
I am using Production suite CS4, Windows 7. I am trying to figure out whatr is the best export setups (codec) to send to the post captioned place who works with Final cut pro. It is a 45 min documentayy shot on hxp170 that will be broadcasted on APTN channel (standard and HD). I shot 720p 24 fps (native) My files are 1.33 pixel ratio.
I want the best quality possible regardless of the size of the file.
Can Avid DNxHD codec work? (I googled and did not find a proper answer)
Also a problem: I tried to export an MXF version and an uncompressed AVI. I used Sapphire plug ins (cartoon, film scratch, glow etc) and with some export setup, it make some clips slide up or left of the screen!!! Anyone had that before?
Also: should I export 24 fps or 23.976?
Thanks a lot.

Is this a Premiere Pro question or an After Effects question? Probably better off in the AE forum...
http://forums.adobe.com/community/aftereffects_general_discussion
In reference to your first question, it might be worth asking them what they WANT. They may have a preferred pre-broadcast format, and if you can supply that, it may save your material from being transcoded (again).
MP

I just purchased a complete series on itunes... Im trying to watch the episodes but its only showing 20 seconds.. can some one help me know what Im doing wrong?

I just purchased a complete series on itunes... Im trying to watch the episodes but its only showing 20 seconds.. can some one help me know what Im doing wrong?

Hi bibisandoval,
Thanks for visiting Apple Support Communities.
If the movie has completely downloaded, I recommend deleting the movie and downloading it again from your list of purchased movies. See this article for the steps:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you are still not able to play the movie, you can report an issue with this purchase using the steps in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Regards,
Jeremy

Why can´t I Export my H264 file as a VMW file in quick time 7. The program only does 30 seconds?.

Why can´t I Export my H264 file as a VMW file in Quick time 7pro. The program only does 30 seconds of the file?

Why can´t I Export my H264 file as a VMW file in Quick time 7pro. The program only does 30 seconds of the file?
The Windows Media codec you are using is running in the "demo" mode. To export full clips you must purchase or upgrade to one of the export capable codec components like those included in the "Studio" or "Studio Pro HD" software package.

I am trying to export my project to an avi file, but its only exporting the audio, help?

I am trying to export my project to an avi file, but its only exporting the audio, help? I can open the avi file but there is not video. I am choosing uncompressed avi, 1080x720 frame rate 29.97, what can i do?

The above was a quote and AME is not necessary. From the Timeline selected Ctrl-M brings up the Export window. There select "AVI" and under Video Codec below select "None"

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

Urgent help on export backup

Hii all,
I have
oracle db : 10.2.0.3
backup : exp backup (9i)
i have 9i export backup of full database backup. Now i need to import on the other database.
For this do i need to create respective tablespaces? or import will directly create the tablespaces? it import will create then where i need to make the changes of the datafile names?
Urgent help is needed friends!!!
Thank you.

hi anand,
i have a query...while import i get the errors in the log stating that the sysman and system object already exists....can i exclude these schemata while importing?
or is there any other way to get rid of such errors in the log file?
Thanks

Compressor only exporting left audio channel in AIFF! Please help!!

Hi, I just realized that the files that I have been exporting using compressor have been only exporting the left channel of audio. I am not sure what the problem is and would appreciate any help anyone could give me, as I'm on a big deadline and need to solve this ASAP.
The way I've been doing it, is I right click on the sequence name in Final Cut Pro and select Export > Export Using Compressor. Then I selected the DVD Best Quality 90 Minutes option. The AIFF file that is created seems to only have audio in the left channel. The original files themselves are definitely stereo, and play both channels in Final Cut.
I really don't understand. The Inspector within Compressor shows this information for the AIFF file:
File Extension: aiff
Estimated file size: unknown
Audio Encoder: 16-bit Integer (Big Endian), Stereo (L R), 48.000 kHz
It says Stereo, so I don't know what the problem is! Please help!!!

Glad I could help.
Sorry for being a bit unclear, and actually misguiding you a bit on the reference files. Reference files are referring to the original media/render files. As long as you do not change the actual media/render files, you should be able to do changes to your FCP project. If you have not rendered before you export a QuickTime Movie reference file of your sequence, it will render on the fly and put the render files inside the reference file with the audio.
I would recommend reading more about self-contained files and reference files in the Final Cut Pro User Manual -> Volume IV -> Part III -> Exporting QuickTime Movies -> Choosng the Type of QuickTime Movie to Export
From the manual:
Choosing the Type of QuickTime Movie to Export
You can create two kinds of QuickTime movies with the Export QuickTime Movie command—a self-contained movie or a reference movie.
Self-contained movie: A self-contained movie contains the video and audio media— all of the data used to create your movie is within a single file. This single file can be safely and easily copied to another computer without worrying that you need other files to play it back.
Reference movie: A reference movie is a very small file that contains pointers, or references, to all of the captured clips used in your sequence. The actual media is located in the original media files. If you rendered your transitions and effects before creating the reference movie, then there are pointers to your render files as well. Otherwise, all of your transitions and effects are rendered using the current level of compression, and then embedded inside the resulting reference movie, increasing its size. All audio tracks, mixing levels, cross fades, and audio filters are rendered and the resulting stereo or mono audio tracks are embedded in the reference movie.
Exporting a reference movie saves time, since you don’t have to wait for every frame of your edited sequence to be duplicated. It also saves hard disk space, since pointers to other files require little space. Reference movies are particularly useful when outputting your sequence for compression using a third-party compression utility.
However, reference movies are not very useful as a means of delivering video files to other people. If you give someone a reference movie, you must also give them the original video files associated with that movie, which can be complicated since you may not know where all the referenced media is stored on disk.
In general, exporting reference movies increases the risk that the movie may not play back. Reference movies are best used when you have short-term uses for the exported movie file, and you only plan to use them on the system you exported them to.

HELP HELP. My iCal opens only for 5 seconds an then it closes....

Since yesterday May 27, my iCal opens only for 5 seconds and then it closes automatically.... I also have hte Missing Sync for Windows Mobile that is a software that sync my pocketpc to my computer.. it was working very well until yesterday.... it's strange... it started saying me that there were a conflict between the information in my pocket pc and my iCal, but it was usual to have this conflict but i have ersed that information but it still have problems.... i tried erasing the file com.apple.iCal.plist but it still with problems....

See the not-charging topic of:
iPod touch: Hardware troubleshooting
Have you tried another cable?
Another charging source? Does iTunes see the iPod when you connect to your computer?
Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.

Only exporting 9 seconds. URGENT HELP

Similar Messages

Maybe you are looking for