Only FF starts with an unwanted 'AV center' scan

FF starts with a virus scan of 'AV Center', telling me I have viruses that I don't have. It's a time waster. Could it be my cache?
== This happened ==
Every time Firefox opened
== days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET CLR 1.1.4322; SLCC1)

Your issue may be caused by Malware. You can run and update the following '''free''' anti virus software:
1. Malwarebytes (Free version) - http://www.malwarebytes.org
2. Spybot Search & Destroy - http://www.safer-networking.org
3.Spyware Terminator - http://www.spywareterminator.com
In addition, there are a number of forums you can use to help get rid of your infection. These include:
*[http://www.bleepingcomputer.com/forums/ Bleeping Computer]
*[http://forums.spybot.info/ Safer-Networking Forums]
*[http://www.spywarewarrior.com/index.php Spyware Warrior Forums]
*[http://www.spywarewarrior.com/index.php SpywareInfo Forums]

Similar Messages

In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

In Linux, my firefox uses the /etc/firefox profile for all users, now I need ONE user only to start with their own profile, I'm struggling to achieve this, please help!

.Jake. wrote:
I forgot to say that the hard drive has not been used yet...
So you have no backup of your data at all?
Pete

G5 will only re-start with Disk Warrior CD! Not Hard Drive...

I just ran Disk Warrior. Now when the computer re-starts, it keeps re-booting on the CD drive.
How do I change to the regular hard drive.
I've tried ejecting the CD. I've turned computer off for several minutes. It still re-starts on CD.
Thanks.

Sean,
Macintosh: How to Eject a Disc When Other Options Do Not Work, and if that doesn't work, restart the computer, then hold down the mouse button.
;~)

Firefox only works when i open a website starting with https

i did an update yesterday to firefox 8. Since i have it, i can only website starting with https. All other websites starting with http don't work. How can i fix this problem?
Thanks

Hello Susanne.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Oracle deleting rows from tables starting with the name PQ

hai friends
we are given access rights to delete only tables starting with PQ. HAVING PQ_NUM as primary key for all the PQ tables.
totally we have 6 tables. PQ_01,PQ_02, PQ_03,PQ_04,PQ_05,PQ_06.
ALL This tables will have one primary key. for example pq_01 willl have pq01_num as primarykey and pq_02 table will have pq02_num as primary
key.
pq01_num value will exist in all the primary key of pq tables.
i want query to delete rows from the pq tables based on the input value i give.
for example if i give primarykey value 122 then that value in pq tables should be deleted.
One more problem is there. pq_06 table does not have pq02_num column. here the column differs. it is pq06_num_req.
so give your idea of deleting the rows from pq tables
waiting
S

I dont have access to databse,this is untested
declare
v_cmd varchar2(2000);
columnname varchar2(30);
input_value number:=??;
tabowner varchar2(30):=???
begin
--step 1 identify table
FOR sub IN (SELECT table_name table_to_delete
FROM all_tables
WHERE table_name LIKE 'PQ%'
and owner=tabowner
) LOOP
----step 2 identify column
v_cmd :='select t.column_name from all_constraints S,All_Ind_Columns T where
S.OWNER=T.TABLE_OWNER
AND S.TABLE_NAME=T.TABLE_NAME
AND S.INDEX_NAME=T.INDEX_NAME
and s.owner=tabowner
AND S.TABLE_NAME='||table_to_delete||'
and s.constraint_type='''P'';
     execute immediate v_cmd into columnname;
     --step 3 delete records
    v_cmd := 'delete from '||tabowner||'.' ||
             sub.table_to_delete || '
   where '||columnname||'='||input_value;
     execute immediate v_cmd;
    commit;
     END LOOP;
end;Edited by: user5495111 on Aug 11, 2009 6:35 AM

Is there a way to only catalog backup set not in the catalog? "CATALOG START WITH" generates double entry.

The DB version is 11.1.0.7.
The "CATALOG START WITH" not only catalog backup set that are not in the RMAN catalog, but also catalog a second copy for files that are already in the catalog.
Files are not a second copy; they are the same file in the same directory.
Having two copies in the catalog, through an error when deleting explicitly the backups.
We have to add the force clause to avoid the error.
RMAN> delete FORCE backup tag 'offsite-1';
The force clause ignores any I/O error.
The delete is part of our scheduled offsite backup script, which returns a false positive error when the force clause is ommited.
I don't want the force clause, in order to be notify if the backup set that are expected to be on disk are no more there, e.g., if someone had deleted files manually at the OS level bypassing rman.
Is there a way to only catalog backup set not in the catalog?
or May be remove the copy #2 entry from the catalog?
Find bellow a test case example:
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
12 B F A DISK 11-JUN-13 09:41:45 1 1 NO OFFSITE-1
13 B F A DISK 11-JUN-13 09:43:31 1 1 NO OFFSITE-1
14 B A A DISK 11-JUN-13 09:43:33 1 1 NO OFFSITE-1
15 B F A DISK 11-JUN-13 09:43:34 1 1 NO OFFSITE-1
RMAN> CATALOG START WITH 'C:\backups\offsite_disk\IBISdatabase\scheduled_offsite';
searching for all files that match the pattern C:\backups\offsite_disk\IBISdatabase\scheduled_offsite
cataloging done
List of Cataloged Files
=======================
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\06OBTJEP_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\07OBTJI3_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\08OBTJI5_1_1
File Name: C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\scheduled_offsite\09OBTJI6_1_1
RMAN> list backup summary TAG 'OFFSITE-1';
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
12 B F A DISK 11-JUN-13 09:41:45 1 2 NO OFFSITE-1
13 B F A DISK 11-JUN-13 09:43:31 1 2 NO OFFSITE-1
14 B A A DISK 11-JUN-13 09:43:33 1 2 NO OFFSITE-1
15 B F A DISK 11-JUN-13 09:43:34 1 2 NO OFFSITE-1
RMAN> DELETE BACKUP TAG 'OFFSITE-1';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
24 18 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 <<--- same file
30 18 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 <<--- same file
25 19 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
31 19 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
26 20 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
32 20 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
27 21 1 1 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
33 21 1 2 AVAILABLE DISK C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1 RECID=24 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1 RECID=25 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1 RECID=26 STAMP=821470356
deleted backup piece
backup piece handle=C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1 RECID=27 STAMP=821470357
Deleted 6 objects
RMAN-06207: WARNING: 4 objects could not be deleted for DISK channel(s) due
RMAN-06208: to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\06OBTJEP_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\07OBTJI3_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\08OBTJI5_1_1
RMAN-06214: Backup Piece C:\BACKUPS\OFFSITE_DISK\IBISDATABASE\SCHEDULED_OFFSITE\09OBTJI6_1_1

Hi JM,
Your demo with Oracle 10.2.0.5
At line 36 you answered "No" to "Do you really want to catalog the above files (enter YES or NO)?".
Just repeate your demo and answer Yes.
Even if he might have replied with "YES" then also, the RMAN search for the files which it can recognize as a valid rman backup file. Else it would show the list of files which are not recognized by RMAN as a valid file.
RMAN> catalog start with '/home/oracle/scripts';
using target database control file instead of recovery catalog
searching for all files that match the pattern /home/oracle/scripts
List of Files Unknown to the Database
=====================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
File Name: /home/oracle/scripts/rman_clone.log
File Name: /home/oracle/scripts/Db_Refresh.sh
File Name: /home/oracle/scripts/rman_erp.scr
File Name: /home/oracle/scripts/RMAN_14FEB.log
File Name: /home/oracle/scripts/nid.sh
File Name: /home/oracle/scripts/Full_Clone.sh
File Name: /home/oracle/scripts/rman_staging.scr
Do you really want to catalog the above files (enter YES or NO)? yes
cataloging files...
no files cataloged
List of Files Which Where Not Cataloged
=======================================
File Name: /home/oracle/scripts/RMAN_BACKUP.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_clone.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Db_Refresh.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_erp.scr
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/RMAN_14FEB.log
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/nid.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/Full_Clone.sh
RMAN-07517: Reason: The file header is corrupted
File Name: /home/oracle/scripts/rman_staging.scr
RMAN-07517: Reason: The file header is corrupted
About the RMAN catalog, it will not catalog the same file twice. It will only catalog the files which are not known to the database.
See this demo. (/backup/RMAN/STAGING/ is the location where all the backup pieces are.)
RMAN> catalog start with '/backup/RMAN/STAGING/';
searching for all files that match the pattern /backup/RMAN/STAGING/
no files found to be unknown to the database
This was the location based test, Another demo showing piece by piece catalogging .
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1323 1321 1 1 AVAILABLE DISK /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
RMAN> catalog backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
cataloged backup piece
backup piece handle=/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00 RECID=1324 STAMP=821717283
RMAN> list backuppiece '/backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00';
List of Backup Pieces
BP Key BS Key Pc# Cp# Status Device Type Piece Name
1324 1321 1 1 AVAILABLE DISK /backup/RMAN/STAGING/ERP_CNTRL_c-13949842-20130724-00
Hope its understandable, if any query please revert.
Happy to Help.
Thanks and Regards,
Prashant

When synching my 4th gen ipod touch I get error msg saying ipod could not be backed up because session could not be started with the ipod. It only does synch steps 2-5. Do I have to restore it?

When synching by 4th gen ipod touch it skips the first step - backup-, does steps 2 through 5, then I get a message the ipod could not be backed up because a session could not be started with the ipod. How do I fix this? Do I have to restore my ipod? Will all my apps be erased?

You have to have an internet connection, either wireless or through a computer with iTunes. When you choose Software Update you can only update to the latest version for your iPod Touch, iOS 6.1.6

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

Why does a new run once start up program run every time I start my computer? The start up program is coming from Reader XI. The only name on it is a number starting with 141_______.

See also https://forums.adobe.com/thread/1654402

Creating a template in Pages is straight-forward as answered here previously. Is there and equivalent for iBooks Author which can start with a blank page and build up the template as required? or can one only adapt a ready made template?

Creating a template in Pages is straight-forward as answered here previously. Is there an equivalent for iBooks Author which can start with a blank page and build up the template as required? or can one only adapt a ready made template? This has proved unsatisfactory to me so far. Lines are left in etc.

There are two basic menus for fonts - one from the main menu bar and one from the toolbar. You can also bring up the font manage dialog.
I don't recommend trying to hard to force an otherwise foreign font, as it inevitably needs to be usable/supported on iOS as well, and that can get tricky w/3rd party fonts, as an example, even with the expanded font support in the latest iBA.
If you need to discuss fonts more, I suggest starting a new thread....preferably with a slightly more brief title, thanks.

Join two Connect By Prior Start With trees and return only common records?

Oracle 10g Release 2 (10.2)
I have two tables that have tree structured data. The results, when running the queries individually are correct, however I need to join tree one to tree two in order to obtain only the common records between them.
-- Tree one
SELECT ip_entity_name, entity_code, hier_level, entity_parent
FROM ip_hierarchy
WHERE hier_level >= 3
CONNECT BY PRIOR entity_code = entity_parent
START WITH entity_code = 'MEWWD';
-- Tree two
SELECT ip_entity_name, entity_code, hier_level, entity_parent
FROM ipt_hierarchy
WHERE hier_level >= 3
CONNECT BY PRIOR entity_code = entity_parent
START WITH entity_code = 'IPNAM';
As I understand, joins may not work with CONNECT BY/START WITH queries?
Is a WITH clause an option?
If at all possible, I don't want to put one select in a View database object and join against the other query.
Thanks.

Hi JTP51,
You can use WITH clause or sub-query by using in-line view, without creating any view object in database.
for example
SELECT A.IP_ENTITY_NAME, A.ENTITY_CODE, ....
FROM (SELECT IP_ENTITY_NAME, ENTITY_CODE, HIER_LEVEL, ENTITY_PARENT
          FROM IP_HIERARCHY
         WHERE HIER_LEVEL >= 3
        CONNECT BY PRIOR ENTITY_CODE = ENTITY_PARENT
         START WITH ENTITY_CODE = 'MEWWD') A,
       (SELECT IP_ENTITY_NAME, ENTITY_CODE, HIER_LEVEL, ENTITY_PARENT
          FROM IPT_HIERARCHY
         WHERE HIER_LEVEL >= 3
        CONNECT BY PRIOR ENTITY_CODE = ENTITY_PARENT
         START WITH ENTITY_CODE = 'IPNAM') B
WHERE A. ENTITY_CODE = B. ENTITY_CODE
AND ....Best regards,
Zhxiang
Edited by: zhxiangxie on Feb 2, 2010 5:35 PM

Why can I only see artists that start with the letter "A"?

On one iPhone, iTunes Match is fine (except that navigation through the iPod app is PAINFULLY slow!!!)
On the other iPhone, iTunes Match only shows artists whose names start with the letter A. I've gone through playlist mode and downloaded other stuff, but they don't show up, regardless of whether "Show All Music" is on or off.
Help!
Any speed tips would be appreciated, too!
mdc

Noel Carboni wrote:
Now I need to figure out where to turn that off by default.
OK, now I see the Fill and Stroke options - ONLY VISIBLE IN THE OPTIONS BAR WHEN TOOL MODE Shape IS SELECTED - that affect the operation of the [Shape] button.
Personally, I really LIKE the concept of always making a Path, then doing with it what I want (e.g., make a Shape with the button).
I'm not sure what I'd suggest about making the Fill and Stroke options available, but clearly the method of haivng them only show when making Shapes, and not when using the [Shape] button is a stumbling block even for folks who are familiar with the product.
I would probably turn off the Stroke feature by default, though, then let people discover it.
-Noel

Making a basic Video starting with sound files only

I'm totally new to Premiere and find it quite dauting. Basic tutorials don't really seem to be helping as they presume you start with a working video.
What I have is several 30-60 second .wav files which I need to be in sequence most of them also have associated GIF images to go with them.
I'd like to create a video which just plays the wav files and the the associated GIFs in sequence?
How do I go about doing this? Help much appreciated.

Before you add any Assets to a Video Track, it will be black, as there is nothing to show. However, that "empty" Video Track can be problematic with many Export options.
Instead, I would Import the Audio files, and drag each to the Timeline, where you want them. Note: a 1-channel (Mono) Clip will ONLY go on a 1-channel Audio Track, but if you do not have one, and need one, just drag that 1-channel Clip to the Master Audio Track. It will not go there, but PrPro will create the necessary 1-channel Audio Track, and put the Clip onto it. Same for 2-channel (Stereo).
When you have your Audio Tracks in place, go to the New icon at the bottom of your Project Panel, and click on that. From the drop-down, choose Black Video. When created, just drag that to say Video Track 1. It will probably be only 05 sec. long (the default), but just click+drag on the Tail of that Black Video Clip, to drag its Duration to match the Duration of the entire Audio Track(s).
Then, Import the graphic Images. Drag each to say Video Track 2, above that Black Video. Adjust each Image's Duration, as needed. If required, you can adjust the Fixed Effects>Motion>Scale, and Motion>Position, if needed. You can also Keyframe those Fixed Effects, if you wish to animate them over time, i.e. Pan, and/or Zoom.
Done.
Good luck,
Hunt

Restrict this transaction code only to create sets starting with 'ZMR'

Hello,
I need to create custom transaction code for 'GS01' and restrict this transaction code only to create sets starting with 'ZMR' No other sets should be allowed to be created.
If anyone have done before with the same scenario. Please give me clear documentation on this .
Reagdrs
Kiran

YOu cannot find the call to the badi's by searching the main program.
The badi is called a t run time.
To find a badi attached to a main program, goto se38,
GIve the program name.
Goto->Object Directory Entry. Find the package.
Go to se18 transaction, Press f4.
give the package name in the popup.
you can get the badis associated with the main program.
Regards,
Ravi

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty. Today, after only eight months starting with the same problems ! I read online that some mac products in 2011 wer

Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty.
Today, after only eight months starting with the same problems !
I read online that some mac products in 2011 were put on the market defective , you can get a warranty extension or even a replacement mac?

dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Only save queries if name starts with Y

Hello,
How can security be configured so that users can only save queries whose Technical names start with Y?
What authorizations are required and what values should be assigned?
Thanks,
Nick

Hello Jin,
We are on BW 3.5.
Here is the complete set of authorizations assigned to my test user. What I want is for this user to only be able to create queries if they choose to save them with a name starting with Y.
Currently (with the authorization specified below) they can save queries that start with any letter. When I save a query with the description and Technical name of: DELETE_VG15 it gives me two messages for "Authorization check". The first says "You do not have authorization for change" and the second message says: "Query (InfoCube ) was saved" So it does end up saving even though the name provided doesn't conform to what I want in the authorizations.
Hopefully you can help me fill in what is wrong, maybe copy what i have and repost with the values you are using.
S_RFC
Activity: 16
Name of RFC to be protected: *
Type of RFC to be protected: *
S_RS_COMP
Activity: 01
InfoArea: *
InfoCube: *
Name (ID) of a reporting component: Y*
Type of a reporting component: QVW, REP
S_RS_COMP1
Activity: 02
Name (ID) of a reporting Component: Y*
Type of a reporting component: QVW, REP
Owner (Person Responsible) for: *
S_RS_ICUBE
Activity: 03
InfoCube SubObject: *
InfoArea: *
InfoCube: *
I Just found this one as well, and it may be the problem:
S_RS_COMP
Activity: *
InfoArea: *
InfoCube: Z_COPA
Name (ID) of a reporting Component: *
Type of a reporting component: QVW, REP
Thanks!
Nick
Message was edited by:
Nick Bertz

Only FF starts with an unwanted 'AV center' scan

Similar Messages

Maybe you are looking for