Only first IDOC stucked with 64 in BD87

Hello Experts ,
scheduled a batchjob for processing the
IDoc's , Issue is when i check in BD87 only the first IDOC is gtting stucked with status 64 and rest all are in 53 .
Note :
- No lock entry created for idoc in Sm12
- Processing mode in we20 is "Trigerby background program"
Could any one help me to find the issue .
Thanks,
NJ

Hi,
Check below links : [nbound Idoc Status 64|nbound Idoc Status 64]
[http://help.sap.com/saphelp_erp2004/helpdata/en/52/16adef543311d1891c0000e8322f96/content.htm|http://help.sap.com/saphelp_erp2004/helpdata/en/52/16adef543311d1891c0000e8322f96/content.htm]
Thanks,
Abhijit

Similar Messages

Urgent:Idoc stuck with status 03 in TRFC

My Idoc is in status 03, but it is not reached to destination.
I guess It is stuck in Rfc layer or in some QUEUE.
There was quality system refresh last week here with Production system.
Pelase suggest what seetings need to be changed and where.
in SM58 it give the following error
'RFC address XXXXXXX doesn't exist'
(where XXXXXXX i m not mentioning here for Client security reasons)
is there any program to clear these layers?
Thanks a ton in advance and the answer will be adequately awarded.

hi,
whnevr ur idoc is in status 03 just run the transaction BD75.
the status will be converted to 12 and datawill be passed.
reward points if hlpful.

Only first frame played with gotoAndPlay

Hello,
My issue is: I have a 120 frame movieclip with a stop(); action on the first frame. I have AS (below) that tells the mc to 'gotoAndPlay(2); But it only goes to frame 2 and stops (no action on that frame) instead of continuing to frame 120. Here an example of the code:
my_mc.onEnterFrame=function(){
if((mcText1 eq "Hit")){
_root.other_mc.gotoAndPlay(2);
else{
_root.other_mc.gotoAndStop(1);
Any ideas to make the mc play automatically when the function requirements are met???
I should know this.
Thank you

Each frame (thanks to onEnterFrame ) the condition (mcText1 eq "Hit") is true or false then each frame go to the frame 1 or frame 2 EVER!!.
When the movie is going to frame 3 again is sent to frame 2
change onEnterFrame to onLoad or call the function only once when you need
my_mc.onLoad=function(){
if((mcText1 eq "Hit")){
_root.other_mc.gotoAndPlay(2);
else{
_root.other_mc.gotoAndStop(1);

My Mac Book Pro suddenly gets stuck with weird horizontal colored lines across the screen, which will only go once I restart the laptop. What can I do?

Randomly while scrolling, the screen just goes beserk and gets stuck with random colored lines. And, the only way to get rid of this is to restart my entire computer. My laptop is about 3 years old now. Is this a sign of age or what? What can I do to run my laptop smoothly without turning it off and on every time it goes crazy?

Try resetting PRAM and SMC.
Reset PRAM. http://support.apple.com/kb/PH4405 x
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

I am using window.print() to print the data of my webpage, it prints only first page and left the remaining while it works fine with IE and Google Chrome, ie print all the pages.

My Page has data more than one page, it has verticle scroll bar to view all data .
I used window.print() to print the data of webpage, but it prints only first page and left the remaining information.
This works fine with Internet Explorer 6+ and Google Chrome.

Does the entire webpage appear in Print Preview? <br />
File > Print Preview

When i first got my ipod touch 4th generation i connected it to itunes but on my computer said new device found but on itunes there are no devices found so im stuck with the connect to itunes symbol on my ipod

i got my ipod touch 4th generation and when i first connected it to itunes it would say device found on my computer but on itunes it would say no device found so im stuck with the connect to itunes symbol on my ipod touch like when u first turn it on

Try here. Start with the one the best fits your symptoms.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

If you didn't back it up, your data is gone. There is no "solution" after the fact.

I replaced my hard drive and am installing the OS 10.5.6 that i got from Apple. It is stuck with 7 minutes remaining. Help! this is the first time I've ever done this.

I just replaced my hard drive in my 13" Macbook. I got the OS install disk from Apple but it's stuck with 7 minutes remaining. What do I do now? I let it check the disk before the install.

Did you properly prep your new drive first?
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.
I think you should shutdown the installer then erase the drive per the above and start again.

Could apple send me an iPad air. All my friends are making fun of me because I'm stuck with the old device and no phone. I've had app problems with apple before so I think that it would only be fair to get a newer device. Thank You Apple

Could apple send me an iPad air. All my friends are making fun of me because I'm stuck with the old device and no phone. I've had app problems with apple before so I think that it would only be fair to get a newer device. Thank You Apple

First we aren't Apple just normal users just like you.
Second provide Apple a feedback or send them a mail.
Third they will never send you a free iPad Air.
If you want one you have to buy it. (go for refurbished if the device is too expensive) or look for special prices.
Contact iTunes support if you have a problem with an App.

Web pages with m3u extension playing only first song on Safari 7.0.

Web pages with m3u extension playing only first song on Safari 7.0

From the menu bar, select
           ▹ System Preferences ▹ Network
If the Network preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advancedbutton and select the Hardware tab. Select
          Configure: Manually
and
          MTU: Custom
Enter an MTU value of 1280.
Click OK and then Apply. Test.
You must apply the change before it takes effect.
If the issue is resolved, experiment with higher MTU values until you find the highest one that works. The higher the MTU, the better the network interface will perform.
If changing the MTU has no effect, restore the Configure setting to Automatically.

Execute only 1 idoc with RBDAPP01

Hello guys,
we have an Inbound Idoc with execution in background.
Also we have a job executing every minute using program RBDAPP01. In our variant we have that packet size is 1 and no parallel because we want to avoid locks.
Sometimes the job is executing two Idocs.
Do you know why? Or do you know how to proceed to execute only one idoc in background job?
Many thanks in advance.
Regards,
Xavi.

Hello guys,
Stephane,
in BD51 the FM is set to 1.
Sandra,
we have lock problems, if the program executes 2 Idocs that could give lock problems, and we want to know if it is possible that with every execution of the job with program RBDAPP01 only one idoc is executed.
Many thanks,
Xavier.
Edited by: Xavi Carb on Jul 29, 2011 8:50 AM
Edited by: Xavi Carb on Jul 29, 2011 8:51 AM

Want to add multiple idoc type with single message type.

Hi Gurus,
I have a problem. I want to add multiple idoc type with single message type in WE20.
How we can do this in WE20 or is there any other way to do that?
Please help me.
Thanks in advance.
Srimanta.

hi,
basically in partner profile i.e. in we20 , we add details to the receiver / sender port that we have created using we21.
so what exactly we do in that is that we first use the message type for those idocs that we have created.
now based on those message type we create a process code. now this is the reason why you cannot apply several message types with the same name in we20... as process code is unque for each message type.
so thats why you can only assign the same message name to several idocs in we82 and then in we20 define the process code for that message type.
it will solve your problem.
hope this will help you!!!
Thanks & regards,
punit raval.

Stuck with my phone :(

Hell started once I joined Verizon. Joined my sister plan to bundle up and supposed to save money. Went to the store and left happy thinking we got a great service. My sister gave me her Iphone 4 and she upgraded to the Iphone 5 and that was that everything was supposed to be dandy carried over with insurance plan and everything. Load and behold out first bill comes, notice it was about 20$ more than the verizon guy said it was going to be. We later figured out that he explain the prices a bit off but that fine he did a little mistake, we try to call customer service and tell them nothing they said he was right but said and wrote down wrong info. They did nothing so we lived with it, thinking oh well that 240 dollar we wont be able to get back. Then another hit to the face, they never carried over my sister insurance to the new line. So now I just stuck with a cracked phone and sadness from a company full of lies. They wouldn't ever offer the new contract deal for the new phone I need, contract was start less that 4months ago. I will most likely just cancel the line and take the 200 dollar hit and go back to t mobile, will end up being the same price as buying a new one from Verizon. Just had to vent.

Why would they give you a new contract when you are only four months into your first one? Imagine if they did allow this, and let you tack an additional two years on your existing contract. You would now be bound to a 40 month contract with the device you picked. Then add another two years when that phone breaks...you could be in contract with Verizon for a LONG time if this was allowed. It doesn't make sense, so Verizon simply doesn't offer it. It sounds like your sister took advantage of you, adding a line so she could upgrade early, leaving you with an old phone and no options. I would suggest finding out when her upgrade is and use that when you can, and In the meantime, buy a used phone if yours is no longer functioning correctly.

Stuck with a bad font in Safari

Safari used to have an option in an appearance setting to select a default font for webpages, and back in high school, I made it something dumb and illegible. It's still set to that same font through transferring my data from one computer to the next, but now the option to change it back is gone. I can't install an older version of Safari to change it, am I stuck with it? My MacBook Pro is completely up to date with all upgrades.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Stuck with intersecting paths and shaped gradients - instructions requested

Hi guys,
I'm new to this forum as this is my first post here, but I'm stuck with a problem in Illustrator and haven't been able to find the specific solution in other places on the net so far.
Please have a look at the following design (can't seem to get the image up on this forum):
http://www.mediafire.com/?pq7mjm4yx65r5cv
This design has been first created in GIMP and now I want to redo it in Illustrator. I'm using CS6. I haven't been using Illustrator for very long, and I can't seem to get this part right.
The areas highlighted in red (the shadows) are the major issue. To be able to get a 'folded' effect, I would like to apply subtle shadows on the visible areas of the lower ribbons, where they intersect with the ones on top, as the sample illustrates.
I don't know how to achieve this effect. This is what I have tried so far:
- Simple drop shadows, but of course they run outside of the visible areas of the ribbons.
- I have also tried rectangular selections with a gradient from black to transparent, but for some reason those look right on the silver part of the design, but turn out brown-ish on the blue part. Besides, this is a lot harder to do on the curved sections you can see in the middle.
Is there a simple way to do this in Illustrator? I have a gut feeling the solution lies somewhere in the pathfinder tool and/or clipping masks, but I'm not really confident as to how to make those work for me.
As a secondary issue, I would like to get the same 1px bevel/emboss effect as the sample image shows. I have tried the 3D effect in Illustrator, but I can't get the right result that way. What would be the best way to do this?
I would really appreciate it if someone could write me some short step-by-step instructions for this.
Below is the sample file for Illustrator. It only has the main shapes and the general colors applied and nothing else.
CS6 version: http://www.mediafire.com/?skpgfsmy2hxqi6s
CS5 version: http://www.mediafire.com/?gxxix6el5wcnaad
My infinite thanks in advance for any help given.
~ ID Graphics.

Start with your simple drop shadows, and then use a clipping mask. Group your letters, and make a copy of the group. Femove shadows from the copy andhange the copy to a black fill. Apply the mask like this: All the unwanted parts of the shadow will be hidden.

Only first IDOC stucked with 64 in BD87

Similar Messages

Maybe you are looking for