Only first subtitle line is shown since last AppleTV 2 update

Hi,
I use handbrake to encode video with soft subtitles, since the last software update It only shows the first subtitle line for everything I've encoded, is anyone experiencing the same problem? Does anyone know a solution?
Thanks in advance!

Everyone:
Here is some more evidence:
1. I thought about the issue, and the distortion seems to follow the cursor in all cases, though sometimes the effect remains after the cursor has been moved away. So, maybe it's related to (drum roll) the cursor? What can I change about the cursor? Its size, in the Universal Access preference. Unfortunately, adjusting the cursor size to maximum and back to minimum has no effect. Oh, well, it was a good idea.
2. Why don't I post a screen-shot of the distortion somewhere? So I put Grab on timer and fooled with the cursor in this very window until the text above "...Universal Access..." appeared with its lower pixels missing, waited until the timer expired. But.... The screen shot DOES NOT SHOW THE PROBLEM. In three completely different trials, the text in the screen shot was flawless. Hmmm, that should be a very good clue for someone who understands how the screen is maintained in MacOS.
3. Right now I have two windows side-by-side mostly filling my screen. On the left, a large photo in Preview. On the right, the Main window of Entourage 2004. I bring Preview to the front and I move the cursor to the approximate horizontal center of Preview's toolbar, which is very near the top of the screen, and I move the cursor vertically towards the bottom of the screen. About half-way, I observe, well, a ripple running across the photo, no --wait-- across the entire screen. Where the ripple meets text (in the Entourage window at the right), it distorts more or less as I've already described. I think it is important that the problem occurs in all windows, not the frontmost. Oh, yes, I've moved this window down near the bottom of the screen and, so far, I've seen no problems. So the problem appears to only occur at mid-screen, vertically. That's where one usually works...
Ideas, anyone?
TIA
Henry

Similar Messages

Okay since last apple software update my safari will not open youtube,yahoo or google

Okay since last apple software update my safari will not open youtube,yahoo or google, an error message comes up saying safari cannot connect to the server. Can anyone help me with this please?

Hi Joshua ..
Check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari to test.
If that wasn't the issue, try using OpenDNS.
Use OpenDNS for better speed, more security, prevents the, "can't connect to server" issue, includes anti phishing filters, prevents browser re directs, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
More about OpenDNS here.
Topic : Manually provided DNS server addresses are higher priority than DHCP's

Since last i tunes update podcasts won't update

Since last i tunes update (3/14) podcasts won't update

What happens when you try to install the iTunes update? Error messages?
You might have better luck posting in the iTunes forum sinc you have an iTunes problem, not an iPod problem.

Programs randomly terminate inadvertantly since last Apple software Update

Since the last Apple Software update, one of which was for my aluminum keyboard I have been experiencing programs like Excel, Word, and FireFox just terminating and generating an error log for no apparent reason. This just started. Mac Pro 3 GHz Dual a lot of memory, Leopard 10.5.2.
Earl

Start with http://www.thexlab.com/faqs/multipleappsquit.html

Flakey wireless since last 2 airport updates

Since applying the last 2 airport update to my quad core mac pro, I've been having nothing but problems with signal strength. The two other macs are fine as well as the windows machine across from the mac pro.
The signal strength meter goes from full bars to 1 and looses connection. I have to turn the airport off and back on in order to get it to work for a few mins.
Any suggestions are welcomed.
thanks,
jr

If you still have the white screen, let the battery fully drain. After chrging for an hour try a reset and restore as necessary.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

CD Drive not working since last set of updates

Anyone else have the problem? It affected my CD drive on my iMac G5...the drive scans and scans blank or recorded CDs then after a while spits them out.
I guess it could be something wrong or dirty with the drive, but was suspicious since ih just happened after that last set of quicktime and iTunes updates.....

655321 wrote:
Can you please explain? you mean mounting the cd-rom drive using fstab???
thanks for the help
ewaller@odin:~ 1015 %
ewaller@odin:~ 1015 %ls /mnt/cdrom
ewaller@odin:~ 1016 %ls /dev/sr0
/dev/sr0
ewaller@odin:~ 1017 %ls /dev/sr0/
ls: cannot access /dev/sr0/: Not a directory
ewaller@odin:~[2] 1018 %sudo mount /dev/sr0 /mnt/cdrom
mount: block device /dev/sr0 is write-protected, mounting read-only
ewaller@odin:~ 1019 %ls /mnt/cdrom
AUDIO_TS VIDEO_TS
ewaller@odin:~ 1020 %
I would not use fstab, because the removable media would require an entry per disk. I show the classic way, but nowadays. udev can handle this for you.

Ever since last Fri's update Firefox keeps crashing on most websites I visit. I've had no response to all the crash reports.

I'm operating a new laptop using Windows 7. Ever since the update last Fri, Firefox keeps crashing on most websites I visit. It's very frustrating. I've browsed to folder C:\Program Files\Mozilla Firefox\components but there is no file nsBrowserOpt.dll.

Mozilla do not respond to crash reports that have been submitted. they are used to help analyze the causes of the crashing in order to make Firefox more stable.
Can you post some of the recent crash report IDs as shown in the [[Firefox crashes]] article, that may help somebody identify the cause of your crashes.

Screen problems since last s/w update -- suggestions please

Folks:
I think the most software update I got and installed was iTunes and QuickTime. I think --I'm not 100% sure-- that after the obligatory restart after that update was when I started seeing problems: Font "distortion" in some applications, not consistent, but now characters run together sometimes and characters look, well, lo-rez -- not consistently at all, though.
Here's a somewhat more clear symptom. Adobe Illustrator (CS3, the latest) displays a rectangle around the central drawing area, a 1 pt black line. Operating in AI the rectangle looks fine until I move the cursor toward it. In some cases --right now on the right side only-- as the cursor approaches the line the a segment of the rectangle displaces away from the cursor about one or two pixels. It doesn't matter which drawing tool I have selected.
Here's another symptom: As I type this (in fully updated FireFox) the first non-blank line above is distorted, as if there is a kind of smudge over the lower half of all the characters. This horizontal smudge seems to follow my progress as I type, two lines above the current cursor. As I continue to type, the distortion moves down, and affects only one line. Characters outside this "smudge zone" are fine.
Another symptom: As I move the cursor around over this text, above and blow, some characters appear bolded. Right now, the "t" in symptom in the line above looks more or less bolded. If I move the cursor to the top of this window, the "t" changes to normal ... and then back again when I continued typing here.
As you can see I'm having difficulty even describing what's going on. It isn't at all consistent, it appears to be system-linked and not application-specific, and it isn't serious -- just quite annoying. Shouldn't be happening!
Oh, no, I checked: It isn't a problem with my glasses <grin>.
Suggestions about how to describe this and where to look for solutions?
TIA,
Henry

Everyone:
Here is some more evidence:
1. I thought about the issue, and the distortion seems to follow the cursor in all cases, though sometimes the effect remains after the cursor has been moved away. So, maybe it's related to (drum roll) the cursor? What can I change about the cursor? Its size, in the Universal Access preference. Unfortunately, adjusting the cursor size to maximum and back to minimum has no effect. Oh, well, it was a good idea.
2. Why don't I post a screen-shot of the distortion somewhere? So I put Grab on timer and fooled with the cursor in this very window until the text above "...Universal Access..." appeared with its lower pixels missing, waited until the timer expired. But.... The screen shot DOES NOT SHOW THE PROBLEM. In three completely different trials, the text in the screen shot was flawless. Hmmm, that should be a very good clue for someone who understands how the screen is maintained in MacOS.
3. Right now I have two windows side-by-side mostly filling my screen. On the left, a large photo in Preview. On the right, the Main window of Entourage 2004. I bring Preview to the front and I move the cursor to the approximate horizontal center of Preview's toolbar, which is very near the top of the screen, and I move the cursor vertically towards the bottom of the screen. About half-way, I observe, well, a ripple running across the photo, no --wait-- across the entire screen. Where the ripple meets text (in the Entourage window at the right), it distorts more or less as I've already described. I think it is important that the problem occurs in all windows, not the frontmost. Oh, yes, I've moved this window down near the bottom of the screen and, so far, I've seen no problems. So the problem appears to only occur at mid-screen, vertically. That's where one usually works...
Ideas, anyone?
TIA
Henry

Confused, Since last CC app Update Core Sync continually stops working.

This is occurring with a window popping up stating 'Core Sync has stopped working' more than once an hour, on both my laptop and desktop, both running Windows 7 64bit.
I just spent over 40 minutes on the phone with adobe tech support, to finally be told to turn file sync off in the creative cloud app at some point, and then being instructed to sign out and sign back in to the CC app, whereupon I was told the issue was fixed.
I asked if I could turn sync back on, and was told no, as the problem would recur. I asked then how I was supposed to use file sync then, and the tech simply disconnected. Shortly after this, the window popped up again though file sync was still paused.
So spending this time has solved nothing, I still have this problem on both my computers, support simply bailed on me, and I'm paying $50/month for this...and the window just popped up again.
How do I fix this other than simply turning the creative Cloud app off? I have looked through the forums some, but only seemed to find problems and not solutions.

I have the same problem, on a Windows 7 Pro computer (Dell Vostro 64-bit)
Description:
I updated Adobe Creative Cloud application, then some of the Adobe applications, about three days ago.
Since that time, I get a "Core Sync crashed" Windows error message box about once every hour.
Below is the Windows-supplied diagnostic (in french)
Please do something.
It is unacceptable from a decent software company to 1-deliver untested software 2-let users in the dark.
Signature du problème :
Nom d’événement de problème:          APPCRASH
Nom de l’application:          CoreSync.exe
Version de l’application:          1.1.3.24
Horodatage de l’application:          52aaef95
Nom du module par défaut:          ntdll.dll
Version du module par défaut:          6.1.7601.18247
Horodateur du module par défaut:          521ea8e7
Code de l’exception:          c0000005
Décalage de l’exception:          00097114
Version du système:          6.1.7601.2.1.0.256.48
Identificateur de paramètres régionaux:          1036
Information supplémentaire n° 1:          a7aa
Information supplémentaire n° 2:          a7aa91f17ea749d42a4de3b390fa5b3d
Information supplémentaire n° 3:          a7aa
Information supplémentaire n° 4:          a7aa91f17ea749d42a4de3b390fa5b3d
Lire notre déclaration de confidentialité en ligne :
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x040c
Si la déclaration de confidentialité en ligne n’est pas disponible, lisez la version hors connexion :
C:\Windows\system32\fr-FR\erofflps.txt
Update: I have found a log file, that seems to have been created at the time of ACC update. Log file path is C:\Program Files (x86)\Adobe\Adobe Creative Cloud\CoreSync\customhook\CoreSyncInstall.log. ---[Begin]--- -install Running in Update mode Install path given: 001CF4D0 Install path exists! Installing application Running on 64 bit machine! 008F3FC0Script run successful.Locale setting script succeeded! 00EC57E8Script run successful.Registry set script succeeded! Wait for explorer restart process timed out! ---[End]---
===========================================
UPDATE 2:
I have been able to capture an internal snapshot of the crash, using Visual C 2008 debugger (installed on my machine). This trace should help your developers.
Attached is a screen snapshot.
Please don't hesitate to ask if you need more information.
============================================

Can't print since last epson driver update from Software Update

I have a Epson Workforce 600 connected wirelessly which was working just fine until I installed the driver update yesterday which was provided via Software Update. Now, I can print a test page via the Epson Software and my computer can see the printer but when I hit the "print" button on print dialogs, nothing happens. It's very strange, it seems as if the click isn't even recognized.
I've tried printing from multiple programs and it's all the same. Only printing a test page from the Epson software works at this point. Any suggestions?

The probable cause of this is that the /Library/Caches/Epson folder is missing.
There are several threads here about this issue with Epson printers: try deleting the <hard drive>/Library/Printers/EPSON folder and then reinstalling the software through Software Update or from the Apple download site. After installing the software, restart, delete and re-add the printer. That should recreate the /Library/Caches/Epson folder, and you should be able to print.
hope this helps.

Since last CC desktop update, chrome is crashing.

My chrome browser in Windows 7 pro 64 is now crashing fairly consistently while I am playing a text based game in a second window.
When I restart it and restore tabs, it seems an adobe based tab appears that was not there when chrome crashed:
https://adobeid-na1.services.adobe.com/ims/jump/b67cabd1-e447-487f-94a9-ef1c0b5593d5
{"error":"invalid_credentials"}
I'm wondering what this means and how it might be related to the new version of the CC desktop app.

he is using an account (every OS X user does), he just has automatic login turned on. enter "system preferences" in spotlight and press enter. in system preferences go to accounts. his account will be listed there and by what you say it will be the only one. unlock the lock at the bottom and click on +. create a new account. then select "log out" from the apple menu. log into the new account and see how things are there.

Since last week's update: ATV has twiclost my photos, music, tv, and movies

After I did the update last week, I noticed all of my photos, movies, tv, and music were wiped off of my ATV. I thought sh*t, that *****, but maybe that was supposed to happen with the update right? So I connected the cord, resynced, and waited an hour to upload everuthing... now, 5 days later, all my media is gone again. Now I can totally resync with my itunes, AGAIN, but duuuuuuuudddde, why does every Applie update end up being a pain in the backside? Is anyeone else having this issue? Any advice outthere?
Why do all the apple gadgets work so great, until you need them to?

See other thread.

Is anyone else having trouble with gmail since last ios 6 update?

I used to have no trouble with my email on my ipad. Since the latest update, I'm not able to send and sometimes not able to receive gmail. In the past, I used the ipad's built-in mail and it worked fine. Then, when that got buggy, I tried the gmail app for ipad. That works for a short period of time and then that's having the same problems: can't send email, and takes forever to connect with gmail server.
Does anyone else have this problem? I have no trouble with my phone (not an iphone) or my imac.
This is really problematic for me as I use my ipad primarily for email.
Thanks,
Bob

adding to the confusion, is now mail isn't accepting my username/password.... never seen an apple app fail this badly before...

Is there anyone having problem connecting to internet since last AppleTV update (4.4 (3140))? All my other apple devices work well with my internet connection except appleTV.

I am able to select my Wi-Fi network, but it does not accept my password.

This helped me out.
http://support.apple.com/kb/HT1595

As I can see from others, apparently I am not the only who cannot access ibooks bookstore since doing the iOs7 update. What's up with that and is there going to be a fix soon?

Why can't I access the ibookstore from my ibooks account?

Way to go, James Ward, I had the exact same problem, couldn't access ibookstore after update to IOS7. I did what you said (signing out and signing back into itunes and apps stores -- believing very strongly that it would not work -- and it did work. Now I'm accessing ibookstore on iphone normally. Have no idea why this should solve an ibooks issue, but good call by you.

Only first subtitle line is shown since last AppleTV 2 update

Similar Messages

Maybe you are looking for