Only getting audio out of one ear

Only getting audio out if 1 ear on my mini. Both ears work on all other devices.

EverclearFan,
Did this soundcard come preinstalled in your computer? If so you will need to contact your computer manufacturer for support as the card may be OEM. OEM components are often modified from their retail standards and require special drivers that only the Vendor will have access to.
Jeremy

Similar Messages

  • Headphones only provide sound out of one ear phone

    Hi, I've got a 17" flat panel iMac running 10.4.2. I recently purchased a pair of good (Grado SR80) headphones for general use. When I plug them in to the Mac's headphone port, I get sound out of one ear phone only. Nothing out of the other. The supplied Apple speakers work fine, however, with sound from both speakers. Any idea how I can get the phones to play normally? I'm really disappointed. The headphone port couldn't possibly be monoaural could it? Or so underpowered it won't power a pair of phones?
    robert

    I only have one pair! The speakers work perfectly on my small JVC mini stereo set (which only has 10W of power). The speakers are plugged into the little speaker port on the iMac (I think the Apple iMac speaker jack is non-standard). The headphones were plugged into the headphone jack. I checked the Audio control panel. The settings are fine.

  • When i have my headphones plugged in i only get sound out of one side

    when I have my headphones plugged in - I can hear out of both earbuds when on a telephone call, but when I switch to music I only get sound out of one ear

    There could be 2 possibilities: the earphone cable to not completely seated, or the earphone connector is defective.

  • Only getting sound out of one spea

    Okay, so a while ago my speakers crapped out on me and I could only get sound when I used headphones, which was something I tolerated for some time. But now, just recently (after I got a high-speed internet connection, actually), I can only get sound out of the left headphone. Can anyone give me some assistance here? According to the device manager, I have a Creative Sound Blaster AudioPCI 64V...so I'm not sure if I have a Sound Blaster AudioPCI or a Sound Blaster PCI64. Anyway, I tried installing the drivers for the latter, but it didn't help anything. What's the deal, anyone? Does it sound like a sound card issue, or is it perhaps my speakers?

    EverclearFan,
    Did this soundcard come preinstalled in your computer? If so you will need to contact your computer manufacturer for support as the card may be OEM. OEM components are often modified from their retail standards and require special drivers that only the Vendor will have access to.
    Jeremy

  • TS4559 only getting sound out of right ear, on recently downloaded i tunes account.. I phone 4

    Only receiving sound out of right ear bud on a recently activated I tunes account.. I phone 4

    Hey there Stowe Away,
    It sounds like your headphones that came with the phone only work on the right side. I recommend these steps from the article named:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/ts2634
    3. Disconnect and Restart
    Disconnect the accessory and turn it off, if possible. Restart iPhone, iPod touch, or iPad by turning it off and then back on. When the Home screen reappears, reconnect the accessory.
    4. Isolate
    Isolate the issue to the accessory, if possible. Or, if available, try to reproduce the issue with another identical or similar accessory.
    6. Restore iPhone, iPad, or iPod touch
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Can only hear sound out of one ear in iPod 30gb

    My nephew can only hear sound from one ear of his headphones.
    1) he's not becoming deaf and we've tried multiple pairs of headphones that give the SAME result.
    2) the volume settings are correct, so its not that.
    What are the options here? Is there a known fix? If its a hardware issue, can Apple do anything (free under warranty or repair with charge)?
    Thank you for your help!
    - John M.

    maybe that the file only offers one audio track. have tried other players to play it?

  • When I am using HBOGO, I only get audio out of the AppleTV and no video??

    HboGo on the iPad only runs audio through the Apple TV? how do you get the video to show?

    See [[Firefox keeps opening many tabs or windows]]

  • Why am I only getting audio out of the right side of my iPhone4 headset?

    I plugged my car auxiliary audio cord into my iPhone 4 this morning, but the sound only came out of the right speakers.
    I thought it might be the cord. So, I plugged in my iPhone headset, and the audio is still only coming out of the right side.
    Why is it doing that, and how do I fix it?

    i would try more headsets to be sure
    and made 100% sure the connector was all the way in some people dont apply enough preasure
    if it dont give anything the connector inside the phone is damanged and the phone will require repair

  • Sound only coming out of one ear.

    So recently my ipods sound has only been coming out of one ear. I thought it was the headphones so I bought a new pair but it's still not working. Any ideas?

    It is a bad contact between the iPod earphone jack with the plug.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/ - if you good to deal with small part of electronic device, just buy the part from this company and replace by yourself

  • Playing out of one ear??

    I'm not sure if there's like a virus or something on my iPod or what, but it only plays out of one ear. Volume controls and main controls still work perfectly.
    At first i thought it was the headphones, but when i got my iPod 4th gen. i tried those new headphones with it and it still only plays music out of one ear.
    Any thoughts, suggestions? Please help!

    Maybe the balance of left to right is really off, although I don't really know if it's possible to do that... check the EQ and everything to see if you can adjust the balance.

  • Only getting audio in one ear?

    Hello,
    I am a singer/songwriter using adobe with hopes of capturing a live recording of myself singing and playing guitar at the same time. I want to then upload the file to youtube. I have one condensor microphone (Bluebird by blue microphones) hooked up into an interface and when I playback the recording captured I am only hearing audio in my left ear. I am operating on a mac with osx and using adobe premiere elements 11. From what I read, I need to convert the stereo to mono but I don't think this is possible to do on this program. I have read where I need to hit fill left/ fill right but I've been unable to find those features. If anyone knows anything or has any recommendations for how to hear audio in two ears when you have captured in with one microphone then please help!

    guitarkatie
    You seem to have two threads circulating on your sound/microphone question
    (a) the one you are in now
    "Only Getting Audio In One Ear"
    dated June 5, 2013 10:25 AM
    and
    (b) "How to record audio via a USB Microphone"
    dated May 5, 2013 7:03 PM
    http://forums.adobe.com/message/5383766#5383766
    Earlier today I posted the answer to your Fill from Left and Fill from Right question in the the May 5, 2013 thread
    http://forums.adobe.com/message/5383766#5383766
    ATR

  • For some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store.

    for some reason , when i restore my iphone 4s to factory settings my headphones work when listening to music or youtube videos but when i backup my information onto it , it only comes out of one ear bud and i just got a new one from the apple store. my old iphone 4s audio jack was messed up but i just got a new one with my warranty , can anyone help me please.

    It doesn't matter what it is in your backup that's causing the problem because you can not selectively restore things from your backup. It's all or nothing.
    Set you phone up as a new device and start over.

  • IPhone 4 sound issues (only out of one ear bud)

    I've tried multiple headphones/ear buds and I can only hear music out of one side. This is obviously an iPhone 4 issues considering the headphones don't work on it but work on other stuff.
    Any ideas on how to get this fixed? I got this phone less than a month ago (no protection plan and I refuse to call Apple because they know nothing. I've gotten more help on THESE FORUMS than I have through their phone line.)

    I refuse to call Apple because they know nothing.
    Huh? Perhaps you just had a poor experience but I have always been very impressed with Apple Care on the phone. Just try to escalate to tier 2 and the engineers if the first person cannot resolve.
    In terms of the issue, try blowing compressed air into the jack. It is possible the jack is faulty somehow so also stop into the genius bar, they might just swap it out for ya.
    SM

  • Can only get audio when trying to AirPlay from Dish app

    Since updating to IOS 6 I only get audio when air playing from my Dish Network app on my iPad.  I can get audio and video when mirroring; however the quality is horrible and it doesn't fill my screen.  I was able to get audio and video both before updating my iPad and Apple TV.  The recent updates have been a disaster!! 
    Apple TV and AirPlay were  great products before. I thought updates are supposed to make Apple products better....not worse. Please help if there is a solution

    Usually these types of limitations are added by the app developer, especially with media apps like these. However I would first try Resetting the devices. I found the best way to reset the iPad is to close all apps in the recently used app list. Double tap the Home button to reveal the list at the bottom then tap and hold one icon till they wiggle and display a minus button. Tap the to close all apps them press the Home button to get back to the home screen. Hold the Sleep button till "Slide to power off" appears. Once it has shut down completely press the Sleep button till you see the Apple icon.
    The procedure is similar to resarting your computer when it starts acting flaky. iPads are just a hand head computer and rarely gets shut down or reset so it would be similar to running your computer for months at a time without shutting it down.

  • Cannot import .avi file, I only get audio and no video!

    Im trying to import from an SDCard some video taken from a Samsung camcorder to import into iMovie09, when I play it on Quicktime I only get audio. I have tried MPEG Streamclip to convert the .avi file to another format but have not been successful. I used MediaInfo and these are the results:
    Can anyone help me find a solution please?
    General / Container Stream # 1
    Total Video Streams for this File -> 1
    Total Audio Streams for this File -> 1
    Video Codecs Used -> Samsung MPEG-4
    Audio Codecs Used -> U-Law
    File Format -> AVI
    Play Time -> 10mn 3s
    Total File Size -> 161 MiB
    Total Stream BitRate -> 2 236 Kbps
    Video Stream # 1
    Codec (Human Name) -> MPEG-4 Visual
    Codec (FourCC) -> SEDG
    Frame Width -> 720 pixels
    Frame Height -> 480 pixels
    Frame Rate -> 29.970 fps
    Total Frames -> 18085
    Display Aspect Ratio -> 1.500
    Video Standard -> NTSC
    Scan Type -> Progressive
    Codec Settings (Summary) -> BVOP
    Codec Settings (Packet BitStream) -> No
    QF (like Gordian Knot) -> 0.178
    Codec Settings (BVOP) -> Yes
    Codec Settings (QPel) -> No
    Codec Settings (GMC) -> No warppoints
    Codec Settings (Matrix) -> Default (H.263)
    Video Stream Length -> 10mn 3s 437ms
    Video Stream BitRate -> 1 845 Kbps
    Bit Depth -> 24 bits
    Video Stream Size -> 133 MiB (83%)
    Audio Stream # 1
    Codec -> ADPCM
    Codec (FourCC) -> 7
    Audio Stream Length -> 10mn 3s 400ms
    Audio Stream BitRate -> 384 Kbps
    Audio Stream BitRate Mode -> CBR
    Number of Audio Channels -> 1
    Sampling Rate -> 48.0 KHz
    Bit Depth -> 8 bits
    Audio Stream Size -> 27.6 MiB (17%)
    Thanks in advance!

    Update to first post.
    The Flip Video camcorder records or "captures" video in MPEG-4 advanced simple profile format, saved as an AVI file.
    MPEG-4 advanced simple profile format = usually DivX
    1.) With Mpeg streamclip you should be able to convert your AVI(Divx) files to a DV format for iMovie. To open DivX files, you have to install one of the free Divx Pro codecs on your system.
    MPEG Streamclip 1.8
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    DivX Pro Codec 6.6 (6-month trial)
    http://www.divx.com/divx/mac/
    2.) Visual Hub $24 should be able to convert WMV and AVI (compressed with the DivX Codec)to a DV format for iMovie.
    http://www.techspansion.com/visualhub/
    3.) With Flip4Mac WMV Player Pro $29 you can convert your WMV files for iMovie.
    http://www.flip4mac.com/wmv.htm
    4.) With Perian 0.5 and Quicktime Pro $30 you should be able to convert your AVI/DivX files to a DV format for iMovie.
    http://perian.org/
    I hope one of these solutions work for you.

Maybe you are looking for

  • The Apple id for the Apps logon is wrong

    When I try to update my Apps the Apple id that comes up is not my Apple id. It is an old one that was my wife's. It also comes up on her phone and it is no longer her id. I have tried logging off of the iTunes account on both phones and logging back

  • Coldfusion 11 Multiple Instance Multiple User Access to Settings Summary exception

    I have a multi-instance and using multiple user administration. One of my users notified me he was checking an exception when viewing "Settings Summary" in CFIDE. I was able to replicate the issue by creating a new user and assigning all available pe

  • I bought my Mom an iSight- how can I video with her?

    Hey, I am still confused with some of the threads I've read. I just sent my mom an iSight and I want to video chat with her. Will an AIM account allow me to do this? How about the free trial .Mac account? The reason I am confused is I dont know if AI

  • Desc table_name statements no longer running in sql developer

    simple desc statements like desc table_name; used to run in sql developer however they no longer work. It was working a few days ago and now the same statements dont return any results. The tables exist as I can run select statements fine just not de

  • Cant log in

    I had to restart my computer and it asked me for my password to login. I havent had to use my password in years and when I put it in it it says it is wrong. Also at the top it says MacBookPro (2)  Is that right? HELP i need my computer for work!