Only Getting Sound From Left Speaker/Earbud

I don't know what's wrong with my Nano, but I've tried the R's and they aren't working.
Basically, there's no sound coming from one of my speakers/earbuds. At first, I thought it was a problem with my earbuds, so I got new ones, and it still didn't work. And then I tried plugging my IPod into my portable speakers, and only one speaker works. I really don't understand. Help Please?

That is very interesting.... I have 2 ideas (meaning they probably will not work but try them anyway)of how you can get the sound correct.
1. try putting sound check on ( if it is on, then put it on then off. if that doesn't work, go to step 2...
2. try restoring the ipod(*MAKE SURE YOU CAN GET THE SONGS BACK EASILY BECAUSE THIS MAY NOT WORK, IT'S JUST AN IDEA!*)
Good Luck!

Similar Messages

  • IPod touch audio issue: why do I only get sound from one channel in my ear-pods?

    After upgrading my brand new iPod touch 5th generation to IOS 6.1.2 I only get sound from the right channel of my ear-pods.
    I did not have this issue with IOS 6.1.1. Is this a problem derived from new IOS? Any idea on how to solve it?
    Appreciate your help!

    Have you tried other headphones? If you confirmned it is an iPod problem:
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I am getting resound from left speaker,what to do

    i am getting resound from left speaker,what to do

    Omnidirectional michrophone is placed under the left speaker grill in MBP.
    That may be the reason why you are getting the echo.
    Using an headphone may help.
    Best.

  • I only get sound from the computer's speakers even though I put in headphones

    I have for a while now had the problem that I only get sound from the computer's speakers even though i plug in the headphones, I have rebooted the computer but still the same problem occurs. So i thought there might be someting wrong in the settings, when i open the soundsettings and plug in my headphones nothing happens, usually I believe there should be a text appearing that says that the sound is now going to headphones, am I right? any how, it still just sends the sound out to the speakers and there is no option to send it else where then "soundflower 2ch and soundflower 16ch".
    I do have an external sound card, for music recording, that goes through USB, and when i plug that in i get the option to send the sound to that device and also to recive sound and i can also choose if i want to sent it to the computer's speakers. So could it be someting wrong with the headphone jack?

    Good day!
    Thank you for writing to the Dell Community Forum.
    Boot into the System Bios and make sure that Onboard Devices- Integrated Audio is On. Then exit the System Bios saving the change. Once back into Windows, open the Device Manager and make sure that ADI1983 HDA appears under Sound devices. Then re-test the rear green audio jack #4 using headphones. Also, reply to this post with the service tag of the system sent via private message so that I can look into the details of the system and assist you better.
    Have a great day ahead.

  • No sound from left speaker headphone out

    Suddenly no sound coming from left speaker through headphone output only. Records in stereo plays in stereo but no sound on left. Tried all the usual suspects ....no luck.  Any suggestions

    Nowhere near enough information to go on, really. If this is a switched socket and the speaker works when it's not connected, then there's either a socket fault or a headphone fault.  Try it with another pair of headphones and see if it still happens. If it doesn't, you have faulty headphones. If it does, then you have some sort of a wiring or socket fault.

  • IPod only funnels sound through left speaker

    my iPod Classic (120 gb) has suddenly stopped funneling sound through both speakers and now only plays through the left speaker, on whatever output i'm using, be it speakers, headphones, whatever. I had a similar problem with the last iPod i had -- a 30gb iPod video -- and my main question i suppose is if this is an easy fix with a simple solution or if my ipod is screwed and its time to get a new one. Thanks preemptively for all of your responses, hopefully i don't have to go too long without hearing both sides of harmonized guitar solos -_-

    i would check the headphone 35mm jack for any foreign materials, as they may cause lessened connectivity.

  • I am running Win 8.1 on bootcamp and cannot get sound from internal speaker

    I am running Win 8.1 on bootcamp and cannot get sound from internal speaker

    Do you have any unknown devices in Device Manager with a yellow triangle and exclamation mark?
    Are the Bootcamp drivers installed?
    You should something similar to the following for Sound Devices, if the drivers are installed.

  • Only getting sound from the left earphone

    I changed headphones to make sure its not a headphone problem but there is no sound from the right earphone. If I press the connector deeper into the socket then both the earphones work fine, however, I have to keep it pressed down with my finger. Does not work of its own accord. I have had it for 13 months now...any tips anyone?

    I have had a the same problem, only its my left headphone that doesnt seem to work.
    I've tried using dozens of headphones and speakers but the left speaker or headphone never works.
    I have found a cheecky way of getting some sound through however. If you push the ipod jack up at an angle to the roof of the ipod jack hole then you should find that it works. Just press down on the ipod jack (nib bit close to the speaker hole).
    Only problem with this is that you have to hold the ipod to listen to it and it can become quite tiresome. As soon as you let go it will stop sound going through that speaker.
    I did also find out that this happens to quite a few people and most commonly is caused when dirt (e.g. sand) gets into the ipod jack hole.

  • Only sound from left speaker!!!!!

    Hi i have a HP Pavilion dv6 Notebook PC. only my left speaker works and if i try headphones only left works there maybe its my audio driver (IDT High Definition Audio CODEC) i really dont know plzz give me some answers!!

    To Start with, check in sound balance...to do that...
    Go to control panel -> Sound -> Double Click on Speakers -> Levels -> Balance...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • 2011 MBP 17" 2.3 GHz - High pitch hissing sound from left speaker

    When I transfer large amounts of data (wifi and ethernet) I get a high pitch hissing sound from the left speaker. When the transfer is done, the hissing stops.
    Is anyone else experiencing this and is there anything I can do to stop it?
    When it occurred: I was transferring data from my old MBP to my new 2011 MBP first via WiFi, then by Ethernet (much faster . My old (2007) MBP had not hissing what so ever, by my new MBP was rather loud. I'm very happy it's only when using the network.

    I get this sound every time I download, WiFi or Ethernet it dosen't matter the sound is the same. I can't guarantee that it's from the speaker, I have an old Netgear switch that sounds the same when I use it (just to clarify: I'm not using that switch anymore or ever have with this MBP)
    So it could be some electrical sound (I'm not a hardware engineer) just a guess.

  • No sound from left speaker on Pavilion DV7-3128CA laptop

    I have a DV7 laptop that I purchased in May 2010.  I have always used headphones for this laptop.  Over the last few months, I had trouble getting audio from the left side of the headphones.  Usually I just adjusted the headphone cord and the problem went away.  As time progressed, it became increasingly difficult to get audio, but i figured it was just a loose connection on my headphones.  .  I then tried a different set of headphones in both headphone terminals and the same result, minimal audio at best.  It seems the right hand speaker on the jack is perfect, music and DVD's, it is just the left side of the audio on the headphone jacks.  Any suggestions?

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59154.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio in both speakers.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Only hear sound from one speaker

    I have been going nuts trying to find help on this. There were some but not exactly the same. So here is my dilemma.
    I am capturing miniDV footage from my camera (Sony DVR PC 330) and used a Sennheiser MKE 300 Shotgun Video Camera Mike to capture audio. Then I captured in into FCE and also Toast 6. Both only produced audio on the left side. Now I checked the speakers, used headset and it was the same. I listened to iTunes and audio from other sources and both speakers and headset worked fine on both sides. Only bringing in from my camera did the sound from only the left speaker. So it's my camera or external mic. Well, I checked that too and I listened to the tape with headsets and heard everything fine on both sides. So the tape has all the audio. So could it be that the firewire is bad? Or is there something I have overlooked. Last week I imported a CD into FCE and produced a CD of audio that was fine. So the program is not at fault I would think. Any ideas would be great.
    iMac G5   Mac OS X (10.3.9)  

    Panning on audio . . . . .>
    The panning is set all the way to the left and shows -1. But this is the default setting. As when you click the little red (x) it will go to the left. And I just opened another project that works fine and it is all the way left with -1. If I move that sequence it sound less full with not bass or something, it just isn't right. So not sure this is the solution. And now I have to go out of town for a few days so will look forward to any other thoughts you all have when I return. Keep thinking
    Jon

  • AUdigy 4, poping sound from left speaker ?

    So i get this poping sound from my left speaker, but the right speaker is ok. I use Audgigy 4.

    Hi moon, and welcome to Apple Discussions.
    Sounds like it's time to speak with someone higher up, and politely explain the situation to them. If no luck there, call Apple Customer Relations. Make sure you get case numbers for each time they attempt to fix something.

  • Y50 clicking sound from left speaker and muffled sound

    Hello,
    I just bought the Y50 yesterday with the GTX 960M. Unfortunatly i noticed while playing that the left speaker started to do a clicking noise, in addition the sound became muffled. When i tilt the laptop the problem is resolved i.e. the clicing stops and the sound returns to normal. After a few minutes the same problem returns until i tilt the laptop or lift it again.
    Please help.
    Model Number:
    20378
    Serial Number:
    Mod comment: Serial number removed for members protection.

    Hi Goldenbird,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing issue with left speaker in your Lenovo Y50 laptop.
    This might be issue with the speaker cable which is not seated properly, please visit the nearest service center fo further details
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure
    they will be a great help.
     Hope this helps. Do post back if the issue persists!
    Best regards,       
    Ashwin. S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • A Single POP Sound from Left speaker, after system heavy load.

    Hello From Russia)) I bought Brand New Macbook pro 15" Late 2011 Ci7, this is incredible machine. But a month past and i started to notice a very strange behavior:
    When i using mac for resource "Eating" application or processes my computer starts to Heat-this is normal.
    When i close all the apps here starts interesting) I have Istat installed, so i can see what temps are in my system. Computer is cooling, and when cpu reaches 50-55 degrees (Celsium, from 80 degrees, because of heavy load) ,my left speaker produces a single loud pop sound. (like something turning of may be)
    In other terms of use absolutely is fine! It is very strange and i dont know is normal or not(
    Thank you very much, and sorry for my english.

    That is not something I would expect.  I would go to a repair facility and have it checked.
    Ciao.

Maybe you are looking for

  • Dial-Peer matches but fails to call out

    Hello, Am trying to get my CME configured for Callcentric.  I have both an inbound and an outbound plan. With my dial-peers configured for standard 11-digit and 10-digit dialing, calls go to fast busy after all digits except the last two are dialed. 

  • Error message while creation of material for wrong warehouse no

    dear all, i have assigned plant and storage location to warehouse no x,created the material for the same.our question is why the system is not showing warning or error message if we create the same material ,plant and stg location combination to a di

  • Install developer suite 10g on windows 7

    hi to all, I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible? thanks Silvia

  • How to rerieve records from the table starting with character 'D'

    Hi Folks, How to get the records from the table starting with character 'D'. Select Max (fld1) fron tab1 into tab1-fld1 where fld 2 = l_fld2 and starting character of fld(1) is 'D'. last record in the table starting with character 'D' How can i do th

  • XTTS - problem in copying datafile into ASM

    I'm testing the migration of database from AIX to Linux using cross platform transportable tablespaces. DB version: source: 10.2.0.4 Destination: 10.2.0.5 OS version: source: AIX6.1 - AIX-Based Systems (64-bit) Destination: RedHat Linux - Linux x86 6