Only getting the last page of a long text

For example, I'll get texts that say:
2/2 "and what is obviously the last sentence or last half of a text"
So, obviously there were 2 pages and I never get the first one.  It happens every time, no matter who is sending or what company their phone is from.  I'm so sick of texting "can you send that last message in smaller increments, my phone doesn't like long texts!". lol.
Any ideas?

I actually went ahead and did the "set back to factory settings" thing.  and it did have me dial  *228 and everything. 
Now to just wait for a long text to see if it worked!

Similar Messages

  • Photosmart C6380 only prints the last page in documents

    My printer only prints the last page of multi page documents. To choose more than one page in a page interval in the print menu does not help, but it is possible to print all pages in a document if I only print one page at a time which takes forever for longer documents. I use Windows 7 64 bits and it used to work until the end of 2011. If I uninstall drivers and reinstall, it sometimes work for a short while and then the problem comes back. All my drivers are updated and I run the printer on wifi.

    Just to add some information: I do not get any error messages, blinking lamps or anything like that. I've got the same problem independent of file-format as it seems. I have tried word-files, pdf-files and to print from the web browser Explorer.

  • Anytime I try to print in Firefox a Microsoft KB article that is 1 page, I always only get the first page.

    Anytime I print any Microsoft KB article, I only get the first page worth of text. This is very troubling because the articles are typically long, and I only get 1 page. The second page always comes out blank (even though in IE it will print out multiple pages with all the text).
    My specific example today is listed in the URL below. This example will only print to the "DIR" command, I don't get the full page printed out.
    Anyone else have this problem? Anyone have a resolution? I hate having to hit up IE just to print a single article.
    I updated to FF 8.01 just to make sure, and I have tried different printers and even computers, to no avail. Even the print preview has the issue, only the first page worth of text is printed and the second page is always blank (even if there are 3, 4, 5, etc pages of data to be printed).
    I have also tried the Firefox Menu -> Print command, and the "on-page" print command. I have seen moderate success with highlighting all the text that I want to print and going to "Print-Selection" but it is ugly.
    Any feedback or assistance is greatly appreciated.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Printing Footer Only on the last page of adobe Form

    Hi Experts ,
    I have a requirement of printing text only on the last page of the adoe Forms.
    I know how to do this in Smart Forms , but being a novice in adobe forms i am unable to get the exact place to puth these conditions.
    Please reply ASAP.
    Thanks

    Thanks .
    Problem Solved.
    Here is the Code snippet in Formcalc language that i used in the intialize event
    var curpage  = $layout.page ( ref ( $ ) )
    var totpages = $layout.pageCount()
    if ( curpage ne totpages ) then
    $.presence = "hidden"
    endif

  • How to display a field only in the last page

    hi all
    i am using reports 6i
    i ve created summary column and i need to get it displayed only on the last page of the report
    is it possible
    kindly guide
    thanking in advance

    Dear Friend,
    where you created the summary coloumn? If your summary column in at top level you can do this just placing summary field bottom all repeating frame (all frames).
    Regards
    Ahamed Rafeeque Cherkala

  • How to get the last page  SAP Script form

    How to get the last page  SAP Script form.
    I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
    Regards

    Hi
    You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
    From SAP Help:
    This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
    Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
    /: IF &NEXTPAGE& = '0'
       Last page
    /: ENDIF
    Max

  • How can I print Double A4 with HP Officejet 6500? I only get the first page...

    I try to print a large photo in "landscape" Double A4 with my HP Officejet 6500.
    I can select "Double A4" to print but I only get the first page. So I only have  half a photo.
    What should I do?

    chris
    You can not attach a multi-page .pdf document to Pages.
    Just create a folder in which you enclose both your Pages letter and the .pdf.
    Peter

  • How to print grandtotal in table footer only in the last page in SMARTFORMS

    Hello Experts,
    How do I print the GRANDTOTAL in the table footer only on the LAST PAGE in SMARTFORMS.
    What I have done is in the text element of CELL1 of the table footer i wrote the folowing logic but not working.
    /: IF &SFSY-PAGE& EQ &SFSY-FORMPAGES&.
    * V_SUM.
    /: ENDIF.
    I even tried this.
    /: IF &NEXT-PAGE& EQ 0.
    * V_SUM.
    /: ENDIF.
    but still it displays the grand total on all pages at table footer.
    How do i go for this experts.
    Regards,
    Ranjith N

    HI Nambiar,
    To print the grand total only on the last page then create the secondary window --> create the text node for the grand total -->In the condition tab check only after the end of the main window.
    This grand total will be displayed after all the items and end of the main window.
    Footer in the table displays as the subtotals i.e on every page total is displayed..
    Regards,
    Sravanthi

  • How to display grand total only on the last page of my report

    Hello
    I need to display the grand total amount of the invoice only on the last page of every report. If the report has 1 page then the grand total will be displayed on the 1st page. If the report has 2 pages then a subtotal will be displayed on the 1st page adding up all the amounts on page 1 only, and the grand total will be displayed on the 2nd page, adding up all the amounts of page 1 and 2. If the report has 3 pages then the a subtotal will be displayed on page 1 adding up all the amounts of page 1, and another subtotal on page 2 adding up all the amounts of page 2, and the grand total are displayed on page 3 adding up the amounts of every page.
    supplier amount
    xx 100
    yy 100
    subtotal 200
    page 1 of 2 --here i need to display only the total amounts of page 1
    supplier amount
    subtotal brought forward 200 --then i need to bring total of page 1 over to page 2
    qq 300
    zz 300
    total 800 --here i have reached the end of the report and  
    need to display the grand total
    page 2 of 2
    --Currently i am displaying this on my report
    supplier amount
    xx 100
    yy 100
    total 800 --this one gives the problem cause it displays the grand total
    ---------- on page 1 of 2 even before you can see the amounts on the
    next pages
    page 1 of 2
    supplier amount
    qq 300
    zz 300
    total 800

    put the grand total in a frame and set it to print on the last page of the enclosing object.

  • I want to display the Terms of my Order Purchase only at the last page

    I 'm new in xml publisher and i'm doing a template (order purchase). I want to print a terms only in the last page, in the end of each order number.
    I have this example:
    group G_CABECALHO by NRO_OC
    NR_OR: NRO_OC PAGE: <?fo:page-number?> / <?fo:page-number-citation:xdofo:lastpage-joinseq?>
    ITEM DESCRIPTION UNIT PRICE QUANT
    F NRO_LINHA_OC ....TAXABLE_FLAG E
    section break
    <?start@last-page-first:body?>
    TERMS AND CONDITIONS
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
    <?end body?>
    page break end G_CABECALHO by NRO_OC

    Hi. The layout is not correct, i generate another order purchase with a lot of lines. The first order the layout is ok, but the second you will see the TERMS in the same page. What i need is to have the TERMS in every end of the orders and to have a fix line border of the layout.
    LAYOUT PAGE 1
    | ORDER 1 |
    | ITEM |
    | 1 |
    | 2 |
    LAYOUT PAGE 2
    | TERMS |
    | XXXXXXXXXXXXXXXXXXXXXX |
    | XXXXXXXXXXXXXXXXXXXXXX |
    |XXXXXXXXXXXXXXXXXXXXXX |
    LAYOUT PAGE 3
    | ORDER 2 |
    | ITEM |
    | 1 |
    | 2 |
    LAYOUT PAGE 4
    | TERMS |
    | XXXXXXXXXXXXXXXXXXXXXX |
    | XXXXXXXXXXXXXXXXXXXXXX |
    |XXXXXXXXXXXXXXXXXXXXXX |
    tks,
    Elene

  • How can I view a PDF file on my IPad? I only get the first page.

    How can I view a PDF file from my Ipad, both in email and Internet links? I only get the first page.

    Support for viewing PDFs in emails and web-pages is built in to the iPad. You need not have bought an app for that.
    There are PDF apps that provide more features than the built-in functionality, but for basic viewing of multi-page PDFs no app is required.

  • Sapscript bottom text in Main, just for the last page, but printing only in the last page

    I need to print a text but only for the last page in the main window.
    I have tried with IF.
    IF &PAGE& = &SAPSCRIPT-FORMPAGES&
    BOTTOM
    ....TEXT
    ENDBOTTOM
    ENDIF
    But it prints in all pages in every main window.
    Can someone point me what I am doing wrong or how can I do this?
    Regards,
    Carlos

    Hello Carlos,
    the problem with this condition is the following.
    The Sapscript composer cannot know during the processing of e.g. the first page,
    how many pages will follow. So &SAPSCRIPT-FORMPAGES& still contains the same
    value like& PAGE& and is filled with the correct values only at the very end of the processing.
    (when the total number of pages is known).
    So I suggest you to use the BOTTOM command in the print program,
    when the processing of all item of the MAIN window is ended.
    There is an other variable &NEXTPAGE&.  &NEXTPAGE& will always be 0
    when it reaches to last page to print. The problem with this variable that
    it can not be used in a condition in MAIN window too, only in a separate page window.
    Regards,
    Hedvig

  • When I open a template I only get the first page. Any ideas?

    Hi, When I open a template in Pages I only get the first page and not the continuation pages. Does anyone have any ideas of what I'm doing wrong? Thanks.

    This same question was asked & answered earlier today. I'll use my same response & the same screenshot I used then.
    Skimming the templates in the Template Chooser shows you all of the pages available in the template once you open it. You can insert the one(s) you want, even more than one of any of them. Most users don't want or need all of the different pages, especially when they start the document.

  • How to make the footer text to come only on the last page

    Hi,
    Iam just making an print forms using adobe forms,Iam havinga text and some variable in the end of the page.these things need to be printed only on the last page.
    if my output of the main window comes for 2 pages then it should print only in the second page not in the first page.
    if the data of my main item data comes to one page then this should be printed on the first page itself.
    how to put a condition on this type of footer windows.
    Thanks in advance.
    regards,
    Sasidhar

    try with the following formcalc Scripting on the subform which contains the footer text...
         var curpage  = $layout.page ( ref ( $ ) )
         var totpages = $layout.pageCount()
         if ( curpage ne totpages ) then
             $.presence = "hidden"
         endif

  • Fields only on the last page of a report

    Hello everybody,
    I have a report region1, the report can contain many records thus I will have to paginate it....
    In the same page, I must have another region2 with some fields on it, but theses fields must appear only on the last page of my report,
    I don't succed to find a condition to apply to region2 in order to make it appear only on the last page of the report region1.
    Any help on this ???

    place those fields outside the repeating frame.
    Draw another frame . Place repeating frame inside it. place those fieds in the outside frame at the end and runthe report

Maybe you are looking for