Only have LabVIEW 2012. Why am I asked to download LabVIEW 2011 SP1 f2 RTE Patch?

Hello,
I recently got a new machine (clean install of Windows 8), and installed LabVIEW 2012, with no other previous versions. However, when I ran the NI Update Service, it listed "LabVIEW 2011 SP1 f2 R(32-bit) Run-Time Engine Patch" as a critical update.
I'm confused; did I accidentally install LV 2011 too?
Thanks
Solved!
Go to Solution.

Also, some addons use older RunTime Engines. It is not suprising that you need the 2011 RTE patch.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

How do I add more memory to my Imac, I only have 1GB of memory and need 2GB to download Yosemite!

How do I add more memory to my Imac, I only have 1GB of memory and need 2GB to download Yosemite?

Janet,
This is why the question rkaufmann87 asked about your model is so important:
[click chart to enlarge if needed]
The list covers the early iMacs with Intel processors that shipped with either OS 10.4 or 10.5 and have only two RAM slots. As you can see, some have limits to what version of OSX you can install. If the step rkaufmann requests does not narrow down your model, you can do one more thing.
While the "About this Mac" window is open, click the "More Info..." button at the bottom of that window to get this (assuming you are really running OS 10.5.8 as shown in your profile):
The code I've indicated with the red arrow corresponds to the codes in the second column on the chart. Post the code your computer reports--again don't post a serial number.
If your iMac shipped with only 1GB RAM, I fear it is one of the earliest models that cannot be upgraded all the way to Yosemite.

I only have my iMaC, WHY SHOULD I BE INTERESTED IN i Cloud?

I only have an iMac, no pad, no phone, no pool , no pets. What would iCloud do for me? I am mystified when I see all the promotion coming my way.

I would say having your contacts, calendar on the cloud will make sure you never lose them
Personally, I prefer entrusting those (and any other private information) to a copy or two on an external hard drive rather than an online server which can go offline, wipe out data, and/or will be hacked into sooner or later. I wouldn't trust anything more than my bookmarks to a server. I did set up a .me email address; it's been offline quite a few times and it wiped my first 5 emails during the initial 24 hours - I've ignored it since.

LabView 2012 hangs when opening a file from LabView 8.5

I have a program originally built in LabView 8.5. I am attempting to migrate it to a new machine running LabView 2012. I can open the program for the first time and make the adjustments needed to clear a few errors having to do with updated VI's and controls. I can then run the VI but after this I close out of LabView and when I attempt to reopen the file LabView hangs on the splash screen while loading the VI.
Any help would be appriciated. Thank you.
-Sam

Please post your original VI and the converted one so we can take a look.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Running LabVIEW 2012 Application builder get message about missing LabVIEW 2013 media

I am trying to make an installer using LV 2012 (Latest version for which I have a license-- Installed from Developer Suite 2013, latest disks I have.)\
I am asking the installer to include Run Time Engine 2012 SP1 f5-- Only choice presented to me for a 2012 RTE
When I Try to build an installer, I get a message asking for a LV 2013 media path, which I don't have...
Any ideas on why this is happening or how to get around it?
Solved!
Go to Solution.

Hi Peter:
Sorry for the long delay getting back to you, I've been off on other projects for the past few.
I have NImax 5.4.0f0 on my computer. Other than that, I don't see any stand-alone DAQmx-- mostly I configure the DAS equipment programatically from within LabVIEW.
Attached is a screen shot of the NILM display. You'll note that there's a LV2013 in addition to the LV2012 SP1. Not sure why the 2013 shows up in the LM-- don't recall ever loading it, not even a demo version, and what I'm using is the 2012 SP1.
Since my last post, a few other peculiarities with the app builder-- last week I had a period where it would only run the application builder once to make an installer. After that I'd get an error message of some sort (I neglected to make a note of the exact message-- If I see it again I'll make a note of it.) In order to run the app builder a second time, I had to shut down the computer & reboot.-- it then let me run the app builder one more time, then reboot needed to run it a third time.
I also had a peculiarity where when I ran the installer on the target machine, it would give a "no software will be installed" message. I am pretty sure that this was unrelated to the other problems-- A simple user error, that I wasn't updating the revision number of the exe application, so when the installer went to install on the target it thought the version on the target was the same as the version that I wanted to install? But I mention it in case it has some bearing on the problem.
Client testing the application reports that it is ready to go, so I'll be attempting to build on final (for this release) clean installer version later today-- I'll let you know how that goes.
Thanks for your attention, and again, appologies for the delay in responding to your questions.
Best regards, Louis
Attachments:
NILM Screen Shot.png ‏90 KB

I have a ton of apps i only have 11 pages of apps and when i download more apps it doesnt continue to the next page it just dissapears

my apps just dissapear after 11 pages of apps and i cant see them or delete them

11 pages is the limit. If you have enough space, you could put more in but you won't be able to see it. You have to use Spotlight to find it.
Use computer iTunes to see beyond the 11 page limit. Also in here (much easier) you can group some of your apps together in a folder. Using folders you can have over 2000 apps.

My iTunes store tabs only have Apps store & iTunesU... how to download song

Hi, can anyone tell me how to solve this problem, all my tabs r gone when i update my software, all i can browse is the apps store and iTunesU...

ten time apple wrote:
i also have same problem pls help quick
You're probably in the wrong country's iTunes Store. Scroll down to the bottom of the main iTunes Store window. If the round icon at the lower-right isn't the US flag (presuming your location means Austin, TX), click on it and select the US in the list of countries.

LabVIEW 2012 LLB for VBAI 2011

Hi
I'm trying to build some labview vi's in LabVIEW 2012, to be compatible with Vision Builder AI 2011. I want to include some shared variables. I have the library file containing a string shared variable and a labview VI with just a string control into the shared variable. This is to read text from the vision build inspection. Both the library and the vi is saved under version 2010 but when I try to make a LLB file, the versions change to 2012 again. Do you have any inpute into why this could be?
Cheers.

You need to use the LV project to create a source distribution that includes all the dependencies (including vi.lib). Then close out LV 2012 to make sure you don't accidentally get any cross linking. Open the main VI of your built LLB with LV 2012 and then go to File>>Save for Previous. If there are any licensed VIs from vi.lib included, those may not save for previous, but I think this is what you should try to do.
I'm not sure exactly what you are trying to do, but if you want to use shared variables, VBAI (2010 or later) can update a shared variable with it's results (or read the variable if you want to pass data to VBAI), and then any version of LV can read/write that shared variable because shared variables are not LV version specific so you don't have to have the same version of LV to read/write shared variables. If this is all you want to do, you could just keep your LV code in LV 2012 and read/write the variable that is used by VBAI 2011. You can also use the VBAI API to control the inspection from any version of LV 2010 or higher regardless of the version of VBAI. You can see an example here:
C:\Program Files (x86)\National Instruments\Vision Builder AI XXXX\API Examples\LabVIEW Examples
Let us know if this still does not address your question and provide more details if this doesn't help.
Thanks,
Brad

LabVIEW 2012 used to hang at shutdown, now hangs at launch ("Initializing menus")

Hello,
I'm running Windows 8 64-bit, and have LabVIEW 2012 32-bit (12.0f3). I started using it a few days ago, and was never able to shut down LabVIEW properly. I could close my projects, but when I then tried to exit LabVIEW from the home screen, the GUI simply stop responding, and I'd have to forcibly kill it. Then, I installed the latest VIPM, and noticed that I can't shut that down properly either (I believe VIPM is implemented in LabVIEW?). None of my non-LabVIEW-based programs have this issue.
Then, I tried to install OpenG from within VIPM, which launched LabVIEW itself. However, that hung at "Initializing menus".
I'm not sure if VIPM had anything to do with it, but now, I'm unable to start LabVIEW altogether. Even after restarting my machine (using the Restart option, not Windows 8's Hybrid Boot), LabVIEW would hang at "Initializing menus". Task Manager shows 0% CPU activity, and LabVIEW had only taken ~20MB of memory.
What could be the cause, and how can I fix it?
Thanks
Solved!
Go to Solution.

Ok, I:
Uninstalled ALL National Instruments, JKI, and IVI software.
Rebooted
Manually deleted residual NI, JKI, and IVI files/folders
Cleaned the Windows registry of NI, JKI, and IVI entries
Rebooted
Checked Task Manager to ensure that no NI service eluded deletion
Installed LabVIEW 2012 from the NI Developer Suite DVD (LabVIEW only -- no other components)
Rebooted
Launched LabVIEW
LabVIEW launches now, but I'm still unable to shut it down properly... One day it will probably refuse to launch too.
Some help please?

Vlm 3.0 LabVIEW 2012 SP1 disabled in Installer

Hello folks,
i have a Problem with die build Installer with my new updatet vlm 3.0.
I already get the the new license file for vlm 3.0 and installed it, then i made the installer for
LabVIEW 2012 SP1 like i have done it with the previous versions of LabVIEW 2009 2010 2011
In the produkt list of the installer LabVIEW and the DriverDVD is disabled by default (see Screenshot).
Solved!
Go to Solution.

Today i was looking on the server and i have seen that the licenses are LabVIEW 2012 licenses.
I want to install LabVIEW 2012 SP1.
So that's normal, i think i have to wait until i get the new license file for the new version.
Thanks BRennhofer for this idea.
I will report here.

RT build not recognized by LabVIEW 2012

Recently I began upgrading an existing RT project from LV 2011 to 2012, and I have run into a problem when I attempt to build the RT application. The application builds without errors, but when completed the icon within the project is a blue circle with a white question mark on the inside, and does not deploy correctly. According to LV help this icon represents a file with an unknown editor. My initial thought is that I am missing a toolkit, or something else that I need to install.
system specs:
W7 32bit
LV 2012
4x RT targets
Any insights would be appreciated. Thanks.

Hello,
In terms of required installation, when upgrading from LabVIEW 2011 to LabVIEW 2012, you will also need to install LabVIEW Real-Time 2012 and NI-RIO 12.0. You will then have to make sure your RT targets also have their software components upgraded to match your host.
Which icon in your project is a blue circle with a white question mark? A screen shot would be helpful. I have seen this question mark, and removing then re-adding the offending file (.lvproj in my case) removed the question mark. Assuming your software is all installed, you might try this method. You could also try navigating to the location of the file in your Windows Explorer and launching it into LabVIEW from there. This should associate LabVIEW with that type of file, and allow LabVIEW to work with it.
Patrick
CLA

Why am i asked to update my payment info tho it is still the same andgets declined ? Is it because i only have $2 or another reason?

I Have been tryin to update and download free apps but i keep getting to verify my account because my payment info needs to be updated yet it is the same but once i but my info in it tells me it is declined is it because i only have $2.91 in my account or is it something else?

It could be. The app store puts a small hold on the funds when you try to download apps, even free ones. I thought it was only a dollar though, so having 2.91 should be ok. And I'm guessing since you have a set amount it's a gift card? Because if you have a credit card on file it could be as simple as the expiration date being out of date. If it's a debit card then that could be the reason because iTunes doesn't accept debit cards anymore, only credit cards.
Are you getting this message as you try to download? Because if it's a separate e-mail it could be a phishing attempt.
http://www.apple.com/support/itunes/contact/
You could always try to contact iTunes support and see if they can give you a definitive answer.

LabVIEW 2012 Trial Period Only 7 Days???

Did I read that right on the download popup? The LabVIEW 2012 evaluation period is only 7 days? Whose bright idea was this? Yes, I'm talking to you, NI.

crossrulz wrote:
From what I've heard, the initial trial is 7 days. You can get it extended by talking to NI. There's also a dialog on the "license expired" window to get the trial time extended. I want to say the extended time is something like 45 days. But don't take my work for it.
I would only implement something like this if there were only a limited amount of eval licenses to go 'round. Having an eval license expire after 7 days will free it up for recycling sooner if the user has abandoned it. I mean, why else put the user through something as unfriendly/humiliating as asking for more time after just a week of eval as if you were doing something that needed justification?
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Itunes has sent a lot of my music into iCloud. I have not asked for this. I can't log on to icloud, since I only have an ipod. How do I get my music back? It seems to have disappeared from my computer.

itunes has sent a lot of my music into iCloud. I have not asked for this. I can't log on to icloud, since I only have an ipod. How do I get my music back? It seems to have disappeared from my computer.

I have read the the advice you gave, and I had already tried that. It did not help.
When I tried to download an album with nine songs, (I have paid for the complete album), two songs were missing. One of them has showed up/disappeared a couple of times, but with a cloud/arrow-symbol next to it, what I thought to be a symbol for downloading from the cloud. When I click it, it starts a downloading process, and then I am told it cannot be done, "please try again later". The other song is nowhere to be seen. The song with the cloud/arrow-symbol, I bought 3 times, once with the album, twice just the song. That didn't change matters. iTunes tells me I have downoladed all songs I have purchased.
I do not really understand why you do not understand what I am writing, I only describe what happens when I use iTunes.
If a person want to use iCloud, one needs an iPhone, iPad or an iPod Touch. That information is not given until you have downloaded and installed the iCloud program. That is why I have it on my computer, but cannot use it. To set up an iClod account, you have to connect one of the above mentioned devices. I don't have one, so I cannot do it.
If you want the (13013) problem explained, I suggest you google it. I am not the only one to have that problem.
I am thankful that you spend time on trying to help me, but I cannot explain things clearer than this.

LabView 2012 Security System Main vi's have error 200559

The vi's give errors of 200559 in my LabView 2012 and NI application engineer "John Staskal" told me as "Another good step
is to recreate the VI in your current version of LabVIEW so that you know the error is not caused by upgrading the VI to a newer version of LabVIEW." I did all that, but not resolved.
Their application engineer John Staskal also told me as "In addition to working to resolve the error you may want to pursue is posting on our upgrade forum and asking the community to convert the VI to a current
version of LabVIEW. http://forums.ni.com/t5/Version-Conversion/bd-p/VersionConversion".
I did all trouble shooting steps such as highlight execution, probes, etc as what their application engineer told me and still having error of 200559 in LabView 2012.
I appreciate help from any one.
Ali Tariq Bhatti
Ali Tariq Bhatti
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
NI ELVIS II Security System VIs (2).zip ‏313 KB
Error 200559.docx ‏500 KB

RavensFan,
I) Yes, I open up the front panel of the Express VI's and probe into them.
2) I use the express vi's, but if you see my attached vi's file. You will see Security System Main vi is the main vi where the program is running and where I am getting the error of 200559.
3) I also attached the word document file, so I am getting error of 200559 in probes 3, 4, and 5 using Export Key Press and Voltage vi's in this post.
4)Do you know, how to convert these my attached vi's to 2011, 2010, 2009, or LabVIEW8.5 version. May be, it fix the problem, or if you know some one to get help from or get chance to use ELVIS II board, so let me know .Your help or any one's help is appreciated.
Advice: Some people talk on different issues and abusive against your post because they do not want to help and arguing with you on some other topic. You all will observe and I also observed, so also do not want to mention their name and best way is complaint them to the moderator. If anyone still wants to talk on different issues against the post, other way is to do private message.
~~~Be nice, have faith in ALLAH(God)~~~
Attachments:
did probes for Export Press and Key vi's file.docx ‏340 KB

Only have LabVIEW 2012. Why am I asked to download LabVIEW 2011 SP1 f2 RTE Patch?

Similar Messages

Maybe you are looking for