Only import sound - another problem the image flickering

Hello
My problem is that when I import AVI files into Encore, it's only sound that comes with - The video track is empty.
If I play the same movie with Media Player does is both play sound and picture.
What am I doing wrong?
The first DVD I made, I could well do in Encore, but when I played it on my DVD player flickering image. - What should I change to fix this problem ?
I can see the "Quality settings" the source is 720x480 29,97 fps, but the AVI i'm importing is 720x576 25 fps ?
T

steenmikkelsen2 wrote:
Ok - I have imported from the camera to AVS Video editor via USB, then Adobe Promiere can't capture via USB, but need a FireWire connection, (1394) mabye I shall buy a FireWire adapter sow I can capture direct to Premiere -
is there one of you who can recommend FireWire adapter (1394) that I use with Premiere and my analog camcorder?
Oh Dear - AVS uses a library called ffmpeg, which is largely based on reverse engineered commercial codecs and is not - ever - guaranteed to be DVD compliant in it's output.
What looks like has happened to me is that the encore project appears to be NTSC (720x480) and I suspect the flickering issues are caused by changing frame rates in that dodgy conversion utility.
Can you please confirm the following:
1 - Project settings in Encore
2 - Camera settings
3 - Settings used in AVS - including codec used?
Analogue to digital via FireWire capture can be done if you have a special box to do this.

Similar Messages

I have one iPhone 8GB. after making upgrade of iTunes and software of iPhone, it's impossible to use the iPhone. There's no service! doesn't acept the code PIN! it only make emergency calls and the image in the phone is to conect to iTunes.What can i do?

I have one iPhone 8GB. After making un upgrade of iTunes and software of iPhone, it's impossible to use it. There's no service! doesn't acept PIN code! it only makes emergency calls and the image in the iPhone is the sign to connect to iTunes. What can i do to solve it?

Where are you and where did you get the phone. This sounds like a classic symptom of someone who bought an iPhone that originated in the U.S. which was then hacked so it would run on a carrier network other than AT&T... Then, when updating the phone, it becare re-locked to AT&T.
If that's what happened, you now own a paperweight. AT&T will NOT unlock them for any reason.
If this isn't the case, please clarify where you are, what carrier you have and where you got the phone so we can begin troubleshooting.

Dv6 Only plays Sound out of the built in speakers if headphones are plugged in ...please help

My Pavillon Dv6 Only plays Sound out of the built in speakers if headphones are plugged in. It plays sound from both when there plugged in. Please hep me.

Step 1:
In troublshooting the problem you may follow the steps provided below.
a. Click Start, type Sound in the Start Search box.
b. Click Sound in the search results at the top of the Start menu.
c. Click the Playback tab. Notice the check mark next to the default device. For most users,the default device is speaker, change it to headphones. Make sure that your audio settings are configured as expected.
Step 2:
On the Playback tab, select the playback device, click Properties, click the Advanced tab, and make sure that the Default Format is set to the value that you expect. When you finish, close this window to return to the previous window.
Step 3:
On the Playback tab, select the playback device, click Configure, and then make sure the configurations are set correctly.
Method 2:
If the issue persists then I suggest you to follow these below mentioned steps to mute all other sounds when windows detects any communications activity.
a. Click Start, type Sound in the Start Search box.
b. Click Sound in the search results at the top of the Start menu.
c. Click the Communications tab.
d. Click on the radio button according to your convenience, under When Windows detects communications activity.
After performing the above steps you may check for the issue.
For more troubleshooting you may visit this below mentioned link.
Tips for fixing common sound problems
http://windows.microsoft.com/en-us/windows7/Tips-for-fixing-common-sound-problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

In putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I wnt to red

picture size...in putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I want to reduce the image to fit the size of the box.

If you right click on the image on the page in the context menu select photo box alignment and then select one of scale to fit {centered, Left-aligned, Right-aligned}
That should do what you are loking for.

Any Headphones I plug into my Macbook it only Plays sound out of the Left Earphone??

I got New headphones and after about a week i noticed when I plugged it in it only played sound out of the left headphone, i plugged it into my phone and I pod and it Played out of both, then I plugged in different headphones into my Macbook and had the same problmem. I took a thin cotton swab and a TINY bit of rubbing alcohal and cleaned it out, still didnt work. Any ideas would help thanks! Im in panic mode!!

First check the balance in the Sound System Preferences.
If that is set correct I would bring it in to an Apple store and have them take a look at it.

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Imported AVI files show the image doubled

hi,
I am using Premier Elements 7 and when I import a recorded AVI file the video portion shows up twice. If I play the video in media player, or nero recorded content is single. It only shows doubled in Premier Elements 7.
I have imported the image from several different sources and machines all with the same results.
Any ideas why?
Machine Quad core Dell
4 gig ram
Window Vista Bizz

hi I have the screen shot you asked. As for the rest of it, This is part of a security system (CTG Software) that we have had for 10 locations and over 3 years. I periodically have to attach to videos together for the legal purposed because one camera has audio and the other does not. Nothing has changed with this system in the 3 years we have had it. This problem did not start until about a month ago when I bought version 7. I did an upgrade from Version 3....
I did finally get it to work by converting the image to a different format. (used Nero to make it digital and imported that and it looked fine) Fortuneately it was a short video. Would like to figure out why PRE is doing this with this version. Its a lot of extra steps to do if I have a larger video.
Yes the Image is doubled in the timeline as well.

My title and description info on my iPhoto images do not import to Aperture with the image

My title and description info on my iPhoto images do not import to Aperture 3.2 with the image. Is this just the default setting and if so, is there a way to import all the info?

Hello there, FrancesCech.
The following iPhone Troubleshooting Assistant should help with what to do with your situation:
Apple - Support - iPhone - Restore Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/restore/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

How can I select only a small part of the image to clone or edit etc?

I want to select part of the image to clone is, and just edit the selected part. I know i can do this on photoshop but how do i do it on Aperture?

You use the "Retouche" brush in Aperture and set it to "clone".
Option-Click on the location you want to clone from to select a source, and then brush over the location where you want to clone to. The cloned region will follow the shape of the brushed area. You do not lasso the shape to to copy and paste it like in Photoshop.
For example: Duplicating a penguin: The sourcepoint has been set to the beak of the second penguin, and then I brushed along the path where I want to penguin clone to appear.
If I brush the whole area eventually the penguin will be copied completely. You'll have to experiment a bit with the brush size and softnees to ensure that the cloned object will blend in.
Regards
Léonie

Canon Pixma Pro-100 printer ejects 3.8 in of a 4X6 paper and prints only 2.2 in of the image printing from Photoshop CS6, I'm sure I set everything correctly - what could I be missing?

Using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6.
Have new Canon Pixma Pro-100 printer and set it up yesterday. First thing printed was a
document from MS Word (a letter) 8.5 X 11 plain paper - this came out OK. Next I fire up
Photoshop and open a 4 X 6 inch image to do a test print. I set it up in the print dialog as
4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop
manages the color. I load the paper in the rear tray close the covers and hit print. Now, when
it starts to print the printer moves about 3.8 inches of paper out of the printer and starts printing
on the remaining 2.2 inches then spits the paper out. It does this in Photoshop (any image it doesn't
matter), and it does it printing from Capture NX. I have been able to get it to print on the paper
correctly using Apple's Preview program but that that's not going to do me any good. I was on
the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting
I would have to use Canon's printing apps instead to print - that doesn't do me any good either.
I want to be able to print from Photoshop. Any one every heard of this or experienced the same
problem? Thanks JamesD!

Hello again. I recognize that a print is good if you like it and bad if you don't, despite what others might say, but I will at least share my experiences. They might help you or others who are following this thread.
My monitor is calibrated with Spyder 3. Gamma 2.2, 6500K, 83 cd/m^2. Contrast at 50%; brightness about 52%. My monitor lets me choose blackness level - it defaults to 50%.
When I print the test image I linked to above, using Lightroom, with no adjustments, my technical output is as follows:
Middle step wedge shows twelve disticnt steps. Whitest step is color of unprinted paper.
It varies from paper to paper, but I can discerne at least the 252 step and on some papers 253 - telling me I have good highlight detail.
On the black side I discerne 8 or 10, nothing lower. (That sounds like what you are reporting).
Artistically I am very happy how my print looks - nice red strawberries, good flesh tones, etc.
One my monitor, the on-screen image is almost identical to the print. I am surprised that you can see the 2 wedge step on screen at a very similar brightness.
I also checked out this B&W test image:
http://www.northlight-images.co.uk/article_pages/bw_printing/bw-test-image-2.html
You are probably aware of this since you are printing with Print Studio Pro, but others may not be.
You can print a series of test images:
find the one that best suits your taste, enter the calibration values in PSP, and save them as a custom setting. Then, each time you want to print recall the setting.
You can do a similar thing in Lightroom using the printer driver and User Templates.
There would be some one-time trial and error to that approach.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Importing a catalog when the images are stored offline

I have cataloged 126 DVDs worth of images, around 7000 in all (lots of big TIFFs)
As I have done this over the last year, I have selected "import from current location" option so that the actual images stay on the DVDs and I just have the previews in LightRoom.
I am migrating from an old to a new computer. I am using LR 1.3.1.
I burned my LR catalog to a CD and told LR to "import from current location" after pointing LR to the .lrdb file on the CD.
All 7000 images were imported but the previews did not get imported.
I am thoroughly unclear how to get the previews into my new computer. I see a folder called "Lightroom Catalog Previews.lrdata" with a whole bunch of files in it but I don't understand how to get those into Lightroom.

Did you burn the previews folder to the CD as well?

Only one sound source at the time works.

Not that long ago things used to be good. Things used to work nice. I was happy. My desktop was happy. Then, at some point during the summer, something went wrong. I can't remember when exactly it happened, but at some point a poison pill came from the updates, my computer got a bad trip. No error messages, warnings or anything else to prepare me for what was coming.
My hotkeys in sawfish for changing the volume just stopped working. After a while of scratching my head, I noticed that the mixer device that used to be in /dev just isn't there anymore. Gone like a fart in the desert. No idea how to get it back.
And if that wasn't enough, the sound also got generally cranky. If I have a youtube or any other similar tab open in my browser, totem is mute. So, if I want to watch a movie or listen to a music and it's not working, I have to figure out which one of the damn browser tabs has decided to hijack my audio and close it. It's sort of a problem in modern multitasking environment.
Any useful ideas? And no, reinstalling the system is not one.
If I get this back working, I swear to god I will never ever run updates again.

jpalan wrote:However, flash still seems to hijack everything.
Instead of guessing, start playing mplayer and some flash source (youtube or whatever) and post the output of 'fuser -v /dev/snd/*'.
Is your mplayer using alsa? 'cat ~/.mplayer/config' might have the answer (if you use the config) or just check mplayer output:
==========================================================================
Opening audio decoder: [mpg123] MPEG 1.0/2.0/2.5 layers I, II, III
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mpg123] afm: mpg123 (MPEG 1.0/2.0/2.5 layers I, II, III)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
See that
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
- I have configured mplayer to use alsa.

When I perform a search and then click on the images tab the language on the screen changes to Russian or some similiar language. this only happens when I hit the "image" tab. what do I do?

I have tried clicking on several other things on the page once this happens but since I am not familiar with the language I am quickly lost. If I go back to google and start over things are fine until I hit "images"

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

When I open iPhoto with my iPhone plugged in, it won't allow me to import photos claiming that the image is not compatable

please help

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Only import sound - another problem the image flickering

Similar Messages

Maybe you are looking for