Only importing 3 of 20 questions in the GIFT file

I followed Vish's instructions carefully on how to import the GIFT files into adobe captivate 7. I used a txt format. There are 20 questions, but it keeps stopping the import after question 3 and putting in a result side. I cannot see a syntax error in my document. What could possibly cause this problem? I spent so much time on formatting 300 questions and answer sets.

Hi there, I see that the problem was that the txt file had to be encoded as a UTF-8 format. Thank you

Similar Messages

Only imports audio, no video when using DSLR .mov files

I just upgraded to CS6 on my Mac Lion. I created a project using the DSLR settings and tried to import a .mov video clip taken from my Canon 5D camera. Strange thing is it only imported the audio and not the video. I tried many of clips and just audio.
As tests, I tried importing a .mpeg clip from an HDV camcorder and it worked fine. I also changed the extension of the DSLR clip to .mpeg and it still didn't work. The DSLR clips imported fine in CS4, but not CS6. Also as another test, I tried importing on a different Mac computer using Premiere Pro CS6 (from creative cloud) and it imported perfectly. So I'm not sure why it's doing it on my computer? The files open fine in QuickTime.
The only thing that worked was I exported the .Mov files from the DSLR to a HDV .Mov file and it DID import correctly. I don't want to have to go through that step everytime though (or loss the quality)
Any ideas why this is happening? Thanks

I too am having this problem. The video I am trying to import is a .MOV file from a Canon 5D Mark III. When I check the properties of the file in Premiere Pro 5.5, this is what it says:
File Path: S:\Photos\5D mark 3\Video\0F2A0089
Type: QuickTime Movie
File Size: 55.7 MB
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:15:07124
Average Data Rate: 3.7 MB / second
QuickTime Details:
Movie contains 1 video track(s), 1 audio track(s) and 1 timecode track(s).
Video:
There are 453 frames with a duration of 1/29.97th.
Video track 1:
Duration is 454
Average frame rate is 29.91 fps
Video track 1 contains 1 type(s) of video data:
Video data block #1:
Frame Size = 1920 x 1080
Compressor =
Quality = Least (1.00)
Audio:
Audio track 1 contains 1 type(s) of audio data:
Audio data block #1:
Format = 16 bit - Stereo
Rate = 48000 Hz
Compressor = sowt
Timecode:
Timecode track 1 contains 1 type(s) of data:
Timecode data block #1:
Start Time = 00;00;39;04
Reel name =
As you can see PP 5.5 notices the video; it even tells me the # of frames in the video but it won't display it. It might be worth saying the video files from my Canon XF100 work just fine. This is extremely frustrating. Any help would be very much appreciated.

When I import IE8 bookmarks into Firefox Portable, the text files or downloaded Google searches or other downloaded websites that I saved and added to my various Favorites folders do not appear ... and (2) if I can get them to appear, will I continue to b

When I import IE8 bookmarks into Firefox Portable, the text files or downloaded Google searches or other downloaded websites that I saved and added to my various IE8 Favorites folders do not appear ... and (2) if I can get them to appear, will I still be able to add text files to the Firefox Favorites folders ... and how.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

http://portableapps.com/forums/support/firefox_portable

Some Import Operations failed to perform. The following files could not be imported because they cou

Some Import Operations failed to perform. The following files could not be imported because they could not be read....(then all the files that I checked do not get imported

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Import Package problems and error in the Java file created in runtime

got the following error message when i try to load the JSP file given below (FlightSearch.jsp). Given also below the JAVA files (flightsearch$jsp.java) created by the compiler.
Thanks for your help
Susan
Error message
org.apache.jasper.JasperException: Unable to compile class for JSPNote: sun.tools.javac.Main has been deprecated.
C:\jakarta-tomcat\work\client\localhost\client\client\flightsearch$jsp.java:320: 'catch' without 'try'.
} catch (Throwable t) {
^
C:\jakarta-tomcat\work\client\localhost\client\client\flightsearch$jsp.java:328: 'try' without 'catch' or 'finally'.
^
C:\jakarta-tomcat\work\client\localhost\client\client\flightsearch$jsp.java:328: '}' expected.
^
3 errors, 1 warning
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:285)
at org.apache.jasper.servlet.JspServlet.loadJSP(JspServlet.java:548)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:176)
at org.apache.jasper.servlet.JspServlet$JspServletWrapper.service(JspServlet.java:188)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:381)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:473)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
at java.lang.Thread.run(Thread.java:536)
FlightSearch.jsp
<%@page import="java.util.*" errorPage="ErrorHandler.jsp"%>
<%@page import="com.client.entity.Flight"%>
<%@page import="com.client.wsclient.FlightServiceClient"%>
<H3>Available Flight List</H3>
 We have found the following Available flight(s) : 
<table border="0" cellpadding="0" cellspacing="0" width="100">
<tr>
<td width="10%" bgcolor="#808080">Flight Company</td>
<td width="10%" bgcolor="#808080">Flight Number</td>
<td width="10%" bgcolor="#808080">Depart From</td>
<td width="10%" bgcolor="#808080">Arrive</td>
<td width="10%" bgcolor="#808080">Departure Date</td>
<td width="10%" bgcolor="#808080">Departure Time</td>
<td width="10%" bgcolor="#808080">Arrival Date</td>
<td width="10%" bgcolor="#808080">Arrival Time</td>
<td width="10%" bgcolor="#808080">Adult Fare</td>
<td width="10%" bgcolor="#808080">Child Fare</td>
</tr>
<%
//Get the search information
String des = request.getParameter("DFrom");
String arr = request.getParameter("DTo");
String fy = request.getParameter(FYear.value);
String fm = request.getParameter(FMonth.value);
String fd = request.getParameter(FDay.value);
String f1 = fy + "-" + fm;
String FDat = f1 + "-" + fd;
String ty = request.getParameter(TYear.value);
String tm = request.getParameter(TMonth.value);
String td = request.getParameter(TDay.value);
String t1 = ty + "-" + tm;
String TDat = t1 + "-" + td;
String type;
if( request.getParameter(type[0].checked))
type = "Return";
else
{ type = "OneWay";
String clas;
if(request.getParameter(clas[0].checked))
{clas = "ECO";
else
{clas = "BUSS";}
String adult = request.getParameter(Adult.value);
String child = request.getParameter(Child.value);
//Get the server Flight Search Service URL
// ServerFlightSearchBO SFSBO = new ServerFlightSearchBO();
// ServerFlightSearch FlightSearch = SFSBO.getFlightSearchURL();
// FlightSearchServiceClient FSearchServiceClient = new FlightSearchServiceClient
String ServerFlightServiceURL = "http://localhost:7080/AServer/services/FlightService";
//Find available Flight
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(des, arr, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
%>
<tr>
<td width= "10%"><%=flt.getFlightComp()%></td>
<td width= "10%"><%=flt.getFlightNum()%></td>
<td width= "10%"><%=flt.getDestination()%></td>
<td width= "10%"><%=flt.getArrive()%></td>
<td width= "10%"><%=flt.getFrDate()%></td>
<td width= "10%"><%=flt.getFlightDptTm()%></td>
<td width= "10%"><%=flt.getToDate()%></td>
<td width= "10%"><%=flt.getFlightArrTm()%></td>
<%
int adt, chld;
int far_A, tot_A, far_C, tot_C;
adt = Integer.parseInt(adult);
far_A = flt.getAdultFr();
tot_A = adt * far_A;
chld = Integer.parseInt(child);
far_C = flt.getChildFr();
tot_C = chld * far_C;
%>
<td width= "10%"><%=tot_A%></td>
<td width= "10%"><%=tot_C%></td>
</tr>
<%
if(type = "Return")
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(arr, des, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
%>
<tr>
<td width= "10%"><%=flt.getFlightComp()%></td>
<td width= "10%"><%=flt.getFlightNum()%></td>
<td width= "10%"><%=flt.getFlightDpt()%></td>
<td width= "10%"><%=flt.getFlightArr()%></td>
<td width= "10%"><%=flt.getFlightDptDt()%></td>
<td width= "10%"><%=flt.getFlightDptTm()%></td>
<td width= "10%"><%=flt.getFlightArrDt()%></td>
<td width= "10%"><%=flt.getFlightArrTm()%></td>
<%
int adlt, chd;
int fare_A, totA, fare_C, totC;
adlt = Integer.parseInt(adult);
fare_A = flt.getAdultFr();
totA = adlt * fare_A;
chd = Integer.parseInt(child);
fare_C = flt.getChildFr();
totC = chd * fare_C;
%>
<td width= "10%"><%=totA%></td>
<td width= "10%"><%=totC%></td>
</tr>
<%
%>
</table>
flightsearch$jsp.java
package org.apache.jsp;
import java.util.*;
import com.client.entity.Flight;
import com.client.wsclient.FlightServiceClient;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.jsp.*;
import org.apache.jasper.runtime.*;
public class flightsearch$jsp extends HttpJspBase {
static {
public flightsearch$jsp( ) {
private static boolean jspxinited = false;
public final void jspxinit() throws org.apache.jasper.runtime.JspException {
public void _jspService(HttpServletRequest request, HttpServletResponse response)
throws java.io.IOException, ServletException {
JspFactory _jspxFactory = null;
PageContext pageContext = null;
HttpSession session = null;
ServletContext application = null;
ServletConfig config = null;
JspWriter out = null;
Object page = this;
String _value = null;
try {
if (_jspx_inited == false) {
synchronized (this) {
if (_jspx_inited == false) {
jspxinit();
jspxinited = true;
_jspxFactory = JspFactory.getDefaultFactory();
response.setContentType("text/html;ISO-8859-1");
pageContext = _jspxFactory.getPageContext(this, request, response,
"ErrorHandler.jsp", true, 8192, true);
application = pageContext.getServletContext();
config = pageContext.getServletConfig();
session = pageContext.getSession();
out = pageContext.getOut();
// HTML // begin [file="/client/flightsearch.jsp";from=(0,59);to=(1,0)]
out.write("\r\n");
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(1,43);to=(2,0)]
out.write("\r\n");
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(2,58);to=(19,0)]
out.write("\r\n\r\n<H3>Available Flight List</H3>\r\n We have found the following Available flight(s) : \r\n<table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"100\">\r\n <tr>\r\n <td width=\"10%\" bgcolor=\"#808080\">Flight Company</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Flight Number</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Depart From</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Arrive</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Departure Date</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Departure Time</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Arrival Date</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Arrival Time</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Adult Fare</td>\r\n <td width=\"10%\" bgcolor=\"#808080\">Child Fare</td>\r\n </tr>\r\n");
// end
// begin [file="/client/flightsearch.jsp";from=(19,2);to=(66,0)]
//Get the search information
String des = request.getParameter("DFrom");
String arr = request.getParameter("DTo");
String fy = request.getParameter(FYear.value);
String fm = request.getParameter(FMonth.value);
String fd = request.getParameter(FDay.value);
String f1 = fy + "-" + fm;
String FDat = f1 + "-" + fd;
String ty = request.getParameter(TYear.value);
String tm = request.getParameter(TMonth.value);
String td = request.getParameter(TDay.value);
String t1 = ty + "-" + tm;
String TDat = t1 + "-" + td;
String type;
if( request.getParameter(type[0].checked))
type = "Return";
else
{ type = "OneWay";
String clas;
if(request.getParameter(clas[0].checked))
{clas = "ECO";
else
{clas = "BUSS";}
String adult = request.getParameter(Adult.value);
String child = request.getParameter(Child.value);
//Get the server Flight Search Service URL
// ServerFlightSearchBO SFSBO = new ServerFlightSearchBO();
// ServerFlightSearch FlightSearch = SFSBO.getFlightSearchURL();
// FlightSearchServiceClient FSearchServiceClient = new FlightSearchServiceClient
String ServerFlightServiceURL = "http://localhost:7080/AServer/services/FlightService";
//Find available Flight
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(des, arr, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(66,2);to=(68,18)]
out.write("\r\n<tr>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(68,21);to=(68,40)]
out.print(flt.getFlightComp());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(68,42);to=(69,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(69,21);to=(69,39)]
out.print(flt.getFlightNum());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(69,41);to=(70,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(70,21);to=(70,41)]
out.print(flt.getDestination());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(70,43);to=(71,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(71,21);to=(71,36)]
out.print(flt.getArrive());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(71,38);to=(72,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(72,21);to=(72,36)]
out.print(flt.getFrDate());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(72,38);to=(73,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(73,21);to=(73,41)]
out.print(flt.getFlightDptTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(73,43);to=(74,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(74,21);to=(74,36)]
out.print(flt.getToDate());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(74,38);to=(75,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(75,21);to=(75,41)]
out.print(flt.getFlightArrTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(75,43);to=(76,1)]
out.write("</td>\r\n ");
// end
// begin [file="/client/flightsearch.jsp";from=(76,3);to=(87,1)]
int adt, chld;
int far_A, tot_A, far_C, tot_C;
adt = Integer.parseInt(adult);
far_A = flt.getAdultFr();
tot_A = adt * far_A;
chld = Integer.parseInt(child);
far_C = flt.getChildFr();
tot_C = chld * far_C;
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(87,3);to=(88,18)]
out.write("\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(88,21);to=(88,26)]
out.print(tot_A);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(88,28);to=(89,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(89,21);to=(89,26)]
out.print(tot_C);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(89,28);to=(91,0)]
out.write("</td>\r\n</tr>\r\n");
// end
// begin [file="/client/flightsearch.jsp";from=(91,2);to=(100,0)]
if(type = "Return")
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(arr, des, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){
Flight flt = (Flight)it.next();
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(100,2);to=(102,18)]
out.write("\r\n<tr>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(102,21);to=(102,40)]
out.print(flt.getFlightComp());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(102,42);to=(103,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(103,21);to=(103,39)]
out.print(flt.getFlightNum());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(103,41);to=(104,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(104,21);to=(104,39)]
out.print(flt.getFlightDpt());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(104,41);to=(105,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(105,21);to=(105,39)]
out.print(flt.getFlightArr());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(105,41);to=(106,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(106,21);to=(106,41)]
out.print(flt.getFlightDptDt());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(106,43);to=(107,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(107,21);to=(107,41)]
out.print(flt.getFlightDptTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(107,43);to=(108,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(108,21);to=(108,41)]
out.print(flt.getFlightArrDt());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(108,43);to=(109,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(109,21);to=(109,41)]
out.print(flt.getFlightArrTm());
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(109,43);to=(110,1)]
out.write("</td>\r\n ");
// end
// begin [file="/client/flightsearch.jsp";from=(110,3);to=(120,1)]
int adlt, chd;
int fare_A, totA, fare_C, totC;
adlt = Integer.parseInt(adult);
fare_A = flt.getAdultFr();
totA = adlt * fare_A;
chd = Integer.parseInt(child);
fare_C = flt.getChildFr();
totC = chd * fare_C;
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(120,3);to=(121,18)]
out.write("\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(121,21);to=(121,25)]
out.print(totA);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(121,27);to=(122,18)]
out.write("</td>\r\n <td width= \"10%\">");
// end
// begin [file="/client/flightsearch.jsp";from=(122,21);to=(122,25)]
out.print(totC);
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(122,27);to=(124,0)]
out.write("</td>\r\n</tr>\r\n");
// end
// begin [file="/client/flightsearch.jsp";from=(124,2);to=(126,0)]
// end
// HTML // begin [file="/client/flightsearch.jsp";from=(126,2);to=(127,8)]
out.write("\r\n</table>");
// end
} catch (Throwable t) {
if (out != null && out.getBufferSize() != 0)
out.clearBuffer();
if (pageContext != null) pageContext.handlePageException(t);
} finally {
if (_jspxFactory != null) _jspxFactory.releasePageContext(pageContext);

You are missing a closing parens. You have :
if(type = "Return")
FlightServiceClient client = new FlightServiceClient(ServerFlightServiceURL);
ArrayList list = client.getFlight(arr, des, FDat, TDat, type, clas, adult, child);
Iterator it = list.iterator();
while (it.hasNext()){Which opens two parens but you only have one closing parens
</tr>
<%
%>
</table>

Can I import 2 sets of photos with the same file name numbers?

I've inadvertantly not had my camera set to "continuous" for file names and now have 2 memory cards with 2 different sets of images with the same file names.
Can I still import both into Lightroom 2 without problems?
What are the consequences?
Thanks
Stuart

Yes. Of course, two files with the same name cannot be in the same folder. And don't forget to uncheck Don't import suspected duplicates during import.
Another thing is that's not a good idea for good asset management, because someday you'll make some mistake because of this ambiguity. Good DAM practices suggest renaming your files after or during import, so that each files has a unique name across your entire image archive.

How to import nef and psd versions of the same file ?

Hi, I am new to this so please forgive any daftness. I am trying to import from a folder with nef and psd versions of the same file. Lightroom does not seem to recognise the nef if a psd exists. In fact if I specifically try to import the nef later, I get the message that says lightroom will not import the file because it already exists. The import is set to keep the originals in the existing location and the database is new. This is the first import I have done and noticed that the file count did not match.
I need to do this because I need to create alternative psd files from the same raw file but I do not see how.
The psd were created via the bridge to photoshop route.
Please what am I doing wrong ?
Many thanks

Hi thanks for the quick reply. For a "database" application that seems a bit scary. Also I have found that it will import psd and tif and jpg versions of the same file which makes it even odder.
Do you know if there is a way to tell it to favour nef rather than psd ?
thanks,

Question about the java files which created by Web Dynpro

After I create a new project under Web Dynpro, there is no any java file is generated.
Now I create a new application in the project with the following names:
application name: QuizApp
package name: com.sap.tc.webdynpro.tutorials.quiz
component name: QuizComp
window name: Quiz
view name: WelcomeView.
Now, 5 java files are generated under the package:
QuizComp.java,
WelcomeView.java,
QuizCompInterface.java,
QuizInterfaceView.java
QuizCompInterfaceCfg.java
Can someone tell me what do these file mean? For what purpose?

1)QuizComp.java -
this is the source file for whatever you code inside the Component Controller ,
2)WelcomeView.java -
you get one java file for each view you create,
3)QuizCompInterface.java -
represents the public "face" of your component. If this webdynpro DC is used by another DC, the other DC can only "see" the methods present in this java class
4)QuizInterfaceView.java -
this is to represent your view assembly (window and any views as part of it) when you want to embed UI of this DC in another DC
5)QuizCompInterfaceCfg.java -
(advanced concept)
P.S: A java file is created for each Custom controller you create also. And many other classes get created too (which probably you dont need to bother about) but they require for WebDynpro concept to function properly i.e a framework
Hope that clears things.
Regards,
Rajit

Two questions about the PSD file format specicaition

I'm a programmer dealing with a project to parse PSD files. When reading the official file format specification, I found that some fields of the file are not clarified:
1. There is a rectangle structure containing 4 fields: top, left, buttom, right. I wanna know whether these 4 fields can be negative values and is there a rule that the buttom shoud be larger than the top and the right shoud be larger than the left
2. The PSD file contains a color mode section. But if the color mode is RGB, the color mode section contians no data but a 4-byte length field whose value is set to 0. This is true for files in RGB mode 8-bit channel. But after convert the files to RGB mode 32-bit channel using photoshop, the whole color mode section is no long exist.
These two questions may be somehow technical, I would be thankful if someone can give me a hand.

1) was covered in the documentation at one time. Yes, many of them can be negative, that's why they're signed values. Valid rectangles will have the bottom greater than the top, and the right greater than the left. But you can also have empty rectangles, and sometimes invalid rectangles (because the values don't matter).
2) Not sure what you're asking... color mode is just a single enumeration for RGB, CMYK, etc.

No visible cursor, and question about the help-file

Right now I am using a temporary computer, as mine is being re-formated.
When I opened Illustrator to change a text-line in a picture, there was no cursor when I clicked on a word. I could still make my change, but no blinking cursor to tell me where I was. Can somebody please tell me where that setting is? It feels like I am working blind...
I looked for this in the help-file, and while doing that (and not finding the answer), I wondered, as so many times before, how they thought at Adobe when they constructed the help-file as it is now... If I open the help-file in Illustrator, select that I want an answer for Illustrator (the icon to the right of the search-box) WHY do I get answers for InDesign, Bridge and other programs???? WHY not just for Illustrator? I am NOT interested in those programs right now, I want an answer for Illustrator. Please tell me there's a setting or something to fix this, because this drives me crazy each time I want help with something.
Lena
Sweden

Thanks for your answer. For some strange reason the problem is now fixed... I checked the second box in Settings/General that says something like "use exact cursors", restarted the program and no change. Then I went for a coffee break and now it works
So how do I download the pdf help-file?
Lena

Aperture will only import from Camera if it's the Active Application

Aperture won't let me import images from my Canon 5D Mark 2 unless I give it my full attention, ie I can't Check my email or browse the Internet on Safari etc while it is importing.
If I do it will stop importing the images until I click on the Aperture application again and then it resumes!
Pretty annoying if I am importing 800 images and can't use the computer for anything else until it has done it's job.
Any suggestions?
Message was edited by: Armagh Mac

This happens regularly for me (w. a FW800 card reader or with images already on the drive). I don't think it actually stops -- it just goes into deep background mode and does stop updating both the Activity window and the main app window.
I suspect some combination of limited hardware and a drive I/O glitch. I have never noticed it happened on Libraries which I store on external drives (yes, I do that) -- only on Libraries on the boot drive.
It (almost?) always clears when I close Safari. I don't know if this is specific to Safari, or that closing Safari releases the resources Aperture wants. I have closed everything but Safari, and seen the problem persist. Within 20 sec. of closing Safari, though, Aperture is back to steaming through the import.

When I import photos to lightroom CC I get a message Some import operations were not performed. The following files were not imported because they could not be read.

Dsc_5122nef dsc_5123JPG Everything worked fine for the last week. The only thing changed is I removed lightroom 5. How can I reinstall Lightroom 5

Its a 100% failure. I was trying to import 37 photos all failed. I can still import into Lightroom 5. I also can import into Lightroom CC on my other Mac. I tried importing from different cards, my other 7100 and my 5300 same problem. I have tried every combination of card reader, camera and computer I have. The only only time the message shows up is when I try to import into Lightroom CC on my 27 in Mac. Thanks Art

Questions concerning the Apachectl file in Oracle HTTP Server

Three more questions concerning Apachectl file:
(1) The ORACLE_HOME in the file should be the ORACLE_HOME for HTTP SERVER, not the one for database, right?
ORACLE_HOME=/u01/app/oracle/product/10.2.0/http_1
(2) The TNS_ADMIN in the file should be the TNS_ADMIN for HTTP SERVER, not the one for database, right?
TNS_ADMIN=${TNS_ADMIN="/u01/app/oracle/product/10.2.0/http_1/network/admin"}; export TNS_ADMIN
(3) I don't have a httpd.pid file pointed by PIDFILE. Is this a problem?
PIDFILE=/u01/app/oracle/product/10.2.0/http_1/Apache/Apache/logs/httpd.pid

1) right, OHS should be installed in separate home then db
2) not right...in OHS there is no TNS entry...frankly there is no "/ADMIN" dir at all! In db ORACLE_HOEM TNS entry is irrelevant for OHS...it looks the same before and after instlation of OHS.
3) On my server "httpd.pid" is in "C:\oracle\product\10.2.0\db_2\Apache\Apache\logs" and content is "2272". There is reference in httpd.conf file "PidFile logs/httpd.pid". I have never touched or reconfigured it by myself, httpd.conf is customized by instalation of apex!
Hope this helps

Import a servlet from JSP without the use of a .JAR

Migrating web app from NT / iPlanet 4.1 to Solaris / iPlanet 4.1.
I've created a Web app in which JSPs utilize Servlets stored in a JAR file. I am now moving the app to a server that I do not control. I wish to configure the app in such a way that I will be able to modify the servlets and not have to restart the Web server to see the changes. I assume the only way to do this is to remove them from the JAR file.
I'm familiar with how to package servlets in JAR files and use them in JSPs, but can't figure out how to import (my own) servlets from outside the JAR file. Is there any way to do this without specifying the servlet in the CLASSPATH?
...sorry if it's a stupid question, I'm not a Java programmer. Thanks in advance. Please let me know if I have not given enough detail.

I've created a Web app in which JSPs utilize Servlets
stored in a JAR file. I am now moving the app to a
server that I do not control. I wish to configure the
app in such a way that I will be able to modify the
servlets and not have to restart the Web server to see
the changes. I assume the only way to do this is to
remove them from the JAR file.Bad assumption! This will have no impact on reloading the servlets!
What you are asking for is called 'hot deployment'. Not all servers do that.
Tomcat 4 does for instance, but you have to configure it for your specific webapp to be able to use it.
Hot deployment just reloads all the classes in its classpath, it doesn't matter if they're in jars or just .class

Schema Import failed :IMP-00008: unrecognized statement in the export file:

Hi ,
I was running a database schema import from a database DMP file.
I encountered the following error in the log file that was getting generated :
IMP-00008: unrecognized statement in the export file:
All the tables got copied except for one. Now what I have thought of is to import that one table again after taking an export from the prod schema.
But what about the functions,triggers,procedures ?? How do i bring all of them in the schema ?
If reimporting the schema again the only option ?
Thanks
Kk

Hello,
In this order:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023988
Table Objects: Order of Import
Table objects are imported as they are read from the export file. The export file contains objects in the following order:
1. Type definitions
2. Table definitions
3.Table data
4.Table indexes
5. Integrity constraints, views, procedures, and triggers
6. Bitmap, function-based, and domain indexes
The order of import is as follows: new tables are created, data is imported and indexes are built, triggers are imported, integrity constraints are enabled on the new tables, and any bitmap, function-based, and/or domain indexes are built. This sequence prevents data from being rejected due to the order in which tables are imported. This sequence also prevents redundant triggers from firing twice on the same data (once when it is originally inserted and again during the import).
For example, if the emp table has a referential integrity constraint on the dept table and the emp table is imported first, all emp rows that reference departments that have not yet been imported into dept would be rejected if the constraints were enabled.
When data is imported into existing tables, however, the order of import can still produce referential integrity failures. In the situation just given, if the emp table already existed and referential integrity constraints were in force, many rows could be rejected.
A similar situation occurs when a referential integrity constraint on a table references itself. For example, if scott's manager in the emp table is drake, and drake's row has not yet been loaded, scott's row will fail, even though it would be valid at the end of the import.

Only importing 3 of 20 questions in the GIFT file

Similar Messages

Maybe you are looking for