Only input tax is allowed for account 26361212 6000, A0 is not allowed

Dear All,
While doing the J1iH - additional excise transaction - the above error is appearin and the above GL belongs to AED account and the A0 tax code is output tax code is shown in  error message (which i have not used any where)
but if i am trying post additional excise without AED then error " FI/CO interface: Update call without succesful check " appearing
please let me know what are the reasons for this
Regards,
Sanju

Hi,
Use t.code: FS00, enter G/L account 26361212 & company code and keep  *  {All tax types allowed} in tax category field in the control data TAB & save.
Now try your transction.
NOTE: Also check whether posting without taxes is ticked or not
Regards,
Biju K

Similar Messages

  • No taxes on sales/purch.are allowed for account 413000 1203, O0 is not allowed

    Hey, this is the error I'm getting when I'm trying to do "Release to Accounting" in VF02.... The 413000 G/L A/c is a discount account and it has nothing to do with taxes.... I'm attaching the screen shot...Appreciate any help in this regard...

    It might have a tax entry either correct the GL account master FS00 to allow taxes. or key in correct GL account number.
    Thanks
    Hrusikesh

  • No taxes on sales/purch.are allowed for account 440080 1000, A2 is not allo

    hello gurus
    when evere we are doing the billing am getting the prob like this
    No taxes on sales/purch.are allowed for account 440080 1000, A2 is not allowed
    where we can assign cost center in SD
    can u pls tell me the procedure 
    thanks
    shameer

    Dear Shameer
    Go to FS00, input the G/L Account and click on Control Data tab. There maintain asterisk (like star) mark against the field "Tax Category"  This should solve your problem.
    thanks
    G. Lakshmipathi

  • No taxes on sales/purch.are allowed for account 191100 1000, V0 is not allo

    Hi All,
    I am going to post MIRO system is giving me below error
    No taxes on sales/purch.are allowed for account 191100 1000, V0 is not allowed
    Message no. FS217

    Hi,
    a) Is V0 a input tax? Go to FTXP enter the country, enter the tax code and click on the icon properties that would tell you if this is a input tax or output tax with indicator "A" and "V" . If V0 is a input tax then
    b) Go to transaction FS00 and check the tax setting for the GL accounts please enable posting with taxes with "*" and then post the document then it should work
    Regards
    K.R

  • No taxes on sales/purch.are allowed for account 413001 1000, Z3 is not allo

    Hi All,
             I am getting the error message when i am creating the excise invoice in j1iin
    No taxes on sales/purch.are allowed for account 413001 1000, Z3 is not allowed
    Message no. FS217
    Plz Help
    Regards.

    Hi Abid
    Trying to answer your question, can you please let me know what do you mean by "<b>Z3</b>"??
    Also if my understanding is correct, 413001 is the respective GL account for Excise Duty Payable and 1000 is your Sales Org??  Correct me if I am wrong.
    Thanks
    G. Lakshmipathi

  • No taxes on sales/purch.are allowed for account 2601010    5000, V0 is not

    Dear Friends,
    While posting the amount from PLA HOLD to PLA account in J1IH ,getting an error
    No taxes on sales/purch.are allowed for account 2601010    5000, V0 is not allowed.
    This GL is PLA CESS.
    What could be the reason.
    Thanks
    MKS

    Hi,
    Goto the GL account and mark the Tax Category in Control Data to * (all taxes allowed).  This will solve ur issue.
    Thanks
    Krishna.

  • No taxes on sales/purch.are allowed for account 24910000 5000, V0 is not al

    Dear Sir,
    While  posting the amount from PLA HOLD to PLA account in J1IH ,getting an error
    No taxes on sales/purch.are allowed for account 24910000 5000, V0 is not allowed.
    This GL is PLA CESS.
    What could be the reason.
    Thanks
    deepti

    Hi
    This is a setting done by FI during G/L account master data creation. Hence the issue. Use T Code FS00 and check the control data for the relevant G/L account. Take the help of the FI consultant to make the changes.
    Regards,
    Jn.

  • No taxes on sales/purch.are allowed for account 800500 0001, A1 is not allo

    Hi all,
    Iam getting this error  while iam dng invoicing.how to slove this problem,i contacted some of FICA guys ,but they didnt solve..this..
    can any one explain step by step process to slove this, it will more rewardable...
    Cheerss.......

    Satish,
    You need to get this changed by your FICA consultant(s) using FS00. In Control data tab strip, tax category should be * and Postings with out tax allowed shud be selected.
    If you already have balances in this GL, suggest you get help from a technical consultant to change it in debugging mode in tables SKA1/SKB1 <<assuming that you are in dev/testing client..if in production..there shud be SAP note available on how to change the GL Master data when docs exist. Just search for that Note  in OSS >>.
    Rgds
    Rajendra

  • No taxes on sales/ purch. are allowed for account 50600000 , v0 is not al

    Hi ,
    While posting in MIRO , the below error message is coming.
    No taxes on sales/ purch. are allowed for account 50600000 , v0 is not allowed .
    this account is P& L statement  account with Tax category blank in master data.
    please help me how to solve this issue..
    Thanks & regards,
    Hari priya

    Hi,
    Is it the Z message?, if so validations are hitting this message.
    'posting without tax allowed ' has a relevancy  only when you have tax category being filled up on the master data.
    Regards
    Suresh Addagiri
    SAP FICO/sabrix consultant

  • Error in MIRO -  " No taxes on sales/purch.are allowed for account 174600

    Hi freinds,
    a have created new condition type for PO maintained the same Pricing procedure also .now my problem is while doing miro it is showing an error that " No taxes on sales/purch.are allowed for account 174600 1000, V0 is no is not allowed "
    pls help me out .
    regards,
    Rashmi

    Hi
    Fo to FS00 enter your GL and company code go to change made and then go to contoal data tab and then in Tax category
    select * or as per your requirment.
    regards

  • HT1918 I am unable to set up an iTunes billing account as I don't have an issue number on my card, I have tried just inputting different numbers such as just putting 1 but its not allowing me further!?

    I am unable to set up an iTunes billing account as I don't have an issue number on my card, I have tried just inputting different numbers such as just putting 1 but its not allowing me further!?

    Sorry, but you can't. You can only use a credit card issued by a French bank and with a French billing address. Your only solution is going to be to purchase prepaid iTunes cards (there should be several places you can buy them; perhaps FNAC) and use prepaid cards to open the account and purchase.
    Regards.

  • After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

    After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?

    If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for  Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
    You can manage your Apple ID here:
    https://appleid.apple.com

  • Odata error: Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view

    I have created scripted calculation view
    I can add parameter in aforesaid calculation view
    It fetches me right result
    But when I am to call aforesaid calculation view from odata service I am getting following error:
    ERROR      zcustsearch/services/AutoComplete.xsodata
               Parameters are not allowed for entity "calculationView" as it is not a calculation or analytical view.
    Any solutions

    Don't reference it via the catalog object. Otherwise only the runtime Column View will be seen. Instead you should specific the view as the repository object.  This means no schema and use package path::view name.  Like this example from the SHINE content:
    service namespace "sap.hana.democontent.epmNext"  {
       "sap.hana.democontent.epmNext.models::CV_SALESORDER_YEAR_COMPARISON"
        as "salesYear" 
      keys generate local "ID"
        aggregates always
        parameters via entity "InputParams"; 

  • I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes.

    I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.

    In order to download to your phone over the air, you need to be connected to WiFi.
    It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
    You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi.

  • SRM PO failed: Indicator for GR-based invoice verification used not allowed

    Hi Friends,
        I have an issue with a specific PO failed to transfer from SRM to ECC. We are in ECS scenario, SRM 5.0 Service level 7.0. We are in process of SP upgrade but this issue occured in Production system which is still in old SP level(SP 7.0).
    when I check the App Monitor, I am see the following errors:  but the status shows Auto_Completed
    1. PO: Indicator for GR-based invoice verification used not allowed
    2. PO: Instance XXXXXXXXXX of object type PurchaseOrder could not be changed
    3.  PurchOrder XXXXXXXXXX: Purchase order still contains faulty items
    4.  PO XXXXXXXX: Indicator for GR-based invoice verification used not allowed
    I can see the PO copied over to ECC. but status in SRM PO shows 'Error in Process'.
      BBP_PD for object PO shows:  Created, complete, ordered, In Transfer to Execute, Change was Transmitted  as Inactive status.    Transfer Failed shows Active, Document completed, created.
    I checked BP Maintain  for the vendor and PO and its no different than other POs and Vendors except Vendor had 'Goods Receipt based Invoice Verification' indicator checked in SRM.
    I tried to simulate the same Material, Vendor with GR-IV indicator both on and off, it works fine. Ofcourse this is in Quality box with SP 15 level.
    So, I am not sure if SP level upgrade might help it or not? If there are any other means to test, please advise.
    thanks
    Rao

    I was wondering how I could liquidate the PO by either creating a new PO or ??.
    What you could do to revive the PO in question is that after the upgrade, and after a round of background jobs run for CLEAN_REQREQ_UP and BBP_GET_STATUS_2, ask the buyer to make a dummy change to the PO (for example, change the description of the PO) and order again. This would trigger the transfer to the backend again. And hopefully this time, no error would occur.

Maybe you are looking for

  • How to get data from PDF form?

    PDF forms can send data in url like GET or POST method. Is it possible to get data from url, like in PHP http://sever/file.php?item1=value1&item2=value2&item3=value3 In APEX url have specific construction and I don't know how to get value of items (1

  • Rework Order Creation Problem

    Hi, I have created trigger point in routing. I have also maintained the scheduling parameters for new order type for rework order. When trigger activates during confirmation it goes to the Rework order creation screen but gives the message of "Schedu

  • How can I speed up my HTTP,HTTPS calls in Java app?

    In a Java application, I am calling web pages generated in ColdFusion, using the doGet(String) method shown below. It seems really really slow... Is there any way that I can speed it up? Is there a different technology/class/strategy I should use? Th

  • JSF-ADF //  no more connection ? // database unreachable

    Hi, I developed a very simple application with a list on one page, an edit form on a second and a create form on a third page. Easy. No login. Everything seems ok but after a certain amount of time, creation and edit don't work anymore. After a while

  • Mac mail is not responding OS 10.8.1.  I open mail and it freezes.  I've even reinstalled mountain lion 10.8.1.

    My Mac Mail application is not responding.  I open mail and it autimatically freezes.  I've reinstalled Mountain Lion 10.8.1. and ran disk utility.  What can I do to fix this?