Only last slide showing when recording a Software Simulation in CP5

I'm working on a series of lessons about a database application. I've recorded 3 lessons with no problems. Of course today is different. I've set CP5 up to record a new set of screens and when I finish recording only the last slide is showing up on the filmstrip. I've checked and it isn't on FMR. Any ideas. I've ran through the simulation 3 times making sure I've clicked somewhere on each screen I want it to capture and no luck.
Thanks for any and all help.
Susan

I have the sound turned down since I work in a cubical.
The problem resolved when I rebooted the computer.
Thanks
Susan Wright (Equilady)
Remember, the mighty oak was just a nut that held its ground.
http://www.equilady.com

Similar Messages

How do you add a new thumbnail to a slide show when using in-browser editing?

how do you add a new thumbnail to a slide show when using in-browser editing?

At this moment you can’t add pictures to a slideshow. You only can replace them.

Can I show quiz results in the recording of software simulation?

Hello, Everybody, I'm using Adobe Captivate 7. I want to show quiz results after recording the software simulation. If the recording type is training, the user need to click for the instructions. When the user's click is wrong, the captivate will show the failure message and I want to reduce my score due to the wrong click. Please give me a instructions. Thanks!!!

Please do not double post issues.

Q. 2: Powerpoint for Mac 2011 Version 1 How do I get PRESENTER VIEW to work so I can see my notes and the audience only sees the slide show? Currently PRESENTER VIEW shows up on the flatscreen and my laptop shows only the slide show....?!

Q. 2: Powerpoint for Mac 2011 Version 1 How do I get PRESENTER VIEW to work so I can see my notes and the audience only sees the slide show? Currently PRESENTER VIEW shows up on the flatscreen and my laptop shows only the slide show....?!

As PowerPoint it a Microsoft product, you may find that you get better answers to your question on their PowerPoint forums.
Best of luck.

I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

I would also like to know the answer to this. I am having the exact same problem.

In trying to edit my pics only the slide show pics is editing - not the main pic. Trying to crop the pic and the whole main screen goes grey

In trying to edit my pics only the slide show pics is editing - not the main pic. Trying to crop the pic and the whole main screen goes grey

Please check your Firefox Installation's version. (can be found by clicking the main menu, either clicking or hovering over the help button, and then clicking about firefox in the sub menu). depending on how long ago you set up sync you may still be using the older sync version. firefox 29 introduced a new (and might i add far less tedious) sync version. see [[How to update to the new Firefox Sync|this Mozilla support article]] for information on upgrading your sync to the new version.

Saving a slide show when catalog runs from flash drive

A little background - I manage two separate classes of students who use the same laptop with PSE8. Each student has their own flash drive to save a custom catalog for the PSE8. Each time students open PSE8 they load their custom catalog. All image files are saved onto the flash drive. We have been using custom catalogs because our computers have Deep Freeze installed. This system has worked well for images.
When saving a slide show there is no way to specify where the slide show should be saved. I assumed that the slide show would save to the catalog which is sitting on the flash drive. Unfortunately, this is not the case. How can I save a slide show on a external flash drive? I want students to be able to save and be able to reopen their slideshows.
thanks,
Robert

Robert,
Right now,I am looking at my current PSE 7 install on Vista. There is a .psess file type which contains slide show project information. I suspect that this might be the file you are seeking. And I think this file exists with the same purpose in PSE 8.
For PSE 8, you might find those files under a folder structure of
..... \Elements Organizer\Catalogs\name of the specific catalog\projects
I desginated the dots at the beginning of the folder structure because they could be different depending on what version of Windows is running and potentially even other installation choices specific to that machine.
Therefore, you might try searching for the .psess slide show project file type.
Note 1: I am not sure v8 will place the project folder and the .psess files in your case where you have used a custom location for the Catalog that is on a flash drive. Please post back here with the location where you do find the files
Note 2: I suspect that if you are teaching syncing to photoshop.com, you might also need to be concerned about the location of the syncdb folder. My guess would be that it is near that project folder. If you do determine the syncdb location, please also post it back here. Thanks.

Photos open only in slide show

I recently corrected a problem I was having with iPhoto not displaying the SOURCE PANNEL by dragging com.apple.installer.plist to trash. After correcting this problem, photos in iPhoto will open "only" in the SLIDE SHOW mode. Previously the photos would open in edit mode. Is there a fix for this??
Mac G5 Mac OS X (10.4.4)

Think I may have solve my problem. Apparently during my efforts to correct my iPhoto from opening in the Slide Show mode, I must have changed some settings in iPhoto Preferences. I went back to iPhoto General Preferences and changed the double-click setting from "Change to edit view" to "Opens in photo edit window." Photos now open in the edit view. I really don't have a clue why it works, but it works. So I guess I can say the problem is solved.
Regarding trashing the iPhoto preference file: com.apple.iPhoto.plist, that is the file I trashed. I don't think that I said anything in my problem statement about trashing the ...installer ...preference. I still have com.apple.iPhoto.plist in my trash. Are you telling me that I should drag program back to my Preferences folder. By removing this file my Source List was restored???

After pulling pictures into slide show -- when hit run ... everything is blank

I created a slide show from organizer.
All the pictures are there, pan and zoom selected, etc.   Then when I try and preview it - there is nothing on the scree
n it is blank. the bottom layout shows the movement from one picture to the other but the slide show picture
is not working.   I tried to just take the show to file .. which I did. when i then tried to run the .wmv file .. same thing ...
everything was blank.

This black for the image on the preview screen seems to happen if you are missing some type of Windows authorization or permissions.
Playback in the Slide Show Editor in the Preview seems to require additional Windows authorization or permissions: a black screen in the Preview area while there is movement of the thumbnail images below during playback is the symptom of the problem.
-- running from a Windows userid which has administrator authority usually (but not always) avoids this problem.
-- if the userid administrator authority is not sufficient in your particular case, then try starting PSE by right clickin on its desktop icon and choosing Run as Administrator (which does have a different effect than administrator authority of the userid).
Note: for future reference
For a question like this is good to post both the version of Photoshop Elements and the version of the Windows operating system.
Because this specific problem can happen with both multiple PSE versions and different Windows versions, I went ahead and posted guidance.

Auto Record in Software Simulation

Hi, I am attempting to create a software simulation of CATIA
V5.
Only the first frame gets recorded. No mouse activity or
selections frames are created after the initial frame. Then the
only way to end/save the session is to activate Captivate in the
task bar.
I have tested the Software Simulation Auto mode with other
softwares, Maya, Max, and Adobe products, and it seems to work ok.
Problem is, CATIA V5 is my focus software.

I get mouse clicks, and the associated sound, sporadically,
about every fourth or fifth action.
The only way to stop the Captivate 4 session is to first
select the Captivate button on the task bar, then I can select the
"End" button and the session ends.
Full Motion Recording catches more of the action but still
not all.
For Example:
I Select File, the action gets recorded
I select New, the action NOT recorded
This brings up a new project window, the window is recorded
I select part out of the options list, action NOT recorded.
This is a bit frustrating because C4 works with other apps
but CATIA V5 is the ONE I need to record.

Captivate 8 - Issues with correct recording of Software Simulations in monitor 2 (of 2)?

I've been recording Software Simulations in monitor 2 (screen 2 of 2) and an application in monitor 2 to produce automatic demo, assessment and training output. It should be possible but the system doesn't capture all recordable actions (the result is 1 slide for each of demo, assessment and training versions with the ‘final’ screen view and one mouse movement). However if I shift my recording area to screen 1 (i.e. monitor 1) there are no issues. It can be worked around, however is there some other set-up option I'm overlooking?
Thanks in advance for any input.
Jenny

Thank you so much for posting your question. I would have never stopped to think that which screen I was trying to record might make a difference. I was having huge issues with a software simulation not capturing all the necessary screen changes (on Monitor 2), but after reading your post, I moved it to Monitor 1, and it's working as it should again.
You just saved me lots of frustration.

Subreports w/ CR10 only don't show when main report has more than 1 record

I use use Delphi7 and VCL CR10 to display report of 1 master table having 2 detail tables. The database is Interbase so I just use the TTX technology. I design a report to print master record at Detail A, and insert 2 subreports to print details records at Detail B & Detail C, and arrange the subreport links succesfullly. I make Detail C "New Page After" and put a Page Footer section to display some info of master record. I hope I can see a report w/ 1 master record followed by details records in one page.
I managed to pass data from Delphi to CR10 by assigning TCrpeDS.DataPointer of each table to TCrpe.Tables[x].DataPointer (after arranging TCrpe.Subreports[x], where x: 0..2). The report works well if I only print 1 record of master table. When I supply 2 or more record of master table w/ corresponding records of the 2 detal tables, then only the first page will print well, the following pages won't print Detail B & Detail C (can't show data of detail tables).
I try to detect the problem by changing the Record Selection Formula of each subreport to "true or <link condition>". Then again only the first page will print "all" details records (the "true or .." works), other pages will only print Detail A.
Please help me w/ this issue. I thank you in advance.
Regards,
Tjioe

VCL is not Java

Video CC problem in 5.5: only last line shows up

Using Captivate 5.5. My slide has imported slide video and I want to caption the narration contained in the video. There is no other slide audio.
I can enter the caption text in the Slide Notes rows as expected, and I check the Video CC box for each row.
However, when I preview the slide, only the last row of text appears on-screen. It appears right at the beginning of the slide and doesn't go away.
Any ideas why the first line of the captions doesn't appear?
Thanks!

It could be that your eMac is covered under Apple's eMac Repair Extension Program for Video and Power Issues. You can read more about it here:
http://www.apple.com/support/emac/repairextensionprogram/
It could be a coincidence that you started having problems after installing Mac OS X 10.4.7. Let us know if your eMac falls within the serial number ranges on the repair site.

Sustain Pedal not working when recording with software instrument piano

I have an M-Audio sp-2 sustain pedal going into an M-Audio Keystation 88es, which is connected by USB to my mac. When I'm recording and holding down the sustain pedal, the sustain is working properly. However, when I playback what I have recorded, the sustain is gone and it is just the regular piano key notes with no sustain. Does anyone know what the problem here is?

This appears to have been a bug. After restarting the computer the sustain recording is functioning normally now.

Only Current Date showing when downloading to excel

<b>Hi,
I have a query is attached to a template, when I download to excel it only downloads the current date. I have dates ranging from 2001-2006, and it downloads to excel it only downloads the current year of 2006. When I run this query on the SAP template it downloads fine. We are currently using a different excel download the "white paper SAP print strategy approach" that the SAP template does not use. Does anyone experience this same problem? I appreciate your feedback! thanks so much!
</b>

<b>Hi,
I have a query is attached to a template, when I download to excel it only downloads the current date. I have dates ranging from 2001-2006, and it downloads to excel it only downloads the current year of 2006. When I run this query on the SAP template it downloads fine. We are currently using a different excel download the "white paper SAP print strategy approach" that the SAP template does not use. Does anyone experience this same problem? I appreciate your feedback! thanks so much!
</b>

Only last slide showing when recording a Software Simulation in CP5

Similar Messages

Maybe you are looking for