Only LiveCycle Data Services 2.6 or higher is supported in this version of Flash Builder.

Hi guys!
I am using LiveCycle Data services 2.6 and Flash Builder 4.0.. and getting an error
Only LiveCycle Data Services 2.6 or higher is supported in this version of Flash Builder.
Any suggestion? why Flashbuilder is not detecting correct version?
Thanks

Hi Tom,
Thank for reply.
In my application I was using Flex 3.0 and LCDS 2.6. I need to generat PDF
generate and save 100% at client side. so I used Flex Gumbo to use
filestream.save since flex 3.0 doesn't support filestream. Using Gumbo let
me filestream but gave me an "direction" style declaration for charting
component .. mismatch with previous version. To overcome that I used Flex 4
flash builder. That gave got rid of direction but gave me LCDS 2.6 version
error. I have copied my older workspace to another location and using this
workspace for Flex 4. I am using LCDS 2.6 though it give me same error. I
have almost given up, really dont know what needed to be done. Thanks for
your help.
Vipul

Similar Messages

Only LiveCycle Data Services 2.6 and higher are supported.???

not sure if this is the right forum but I have flash builder with sdk 4.1 and I recently installed blazeDS turnkey and tried to set uo a new flex project with a J2EE server type.
However I get this message and am unsure what to do.
Only LiveCycle Data Services 2.6 and higher are supported.
Im trying to follow this tutorial
http://www.adobe.com/devnet/livecycle/articles/blazeds_gettingstarted.html

Can you please try using the blazeds from:
http://opensource.adobe.com/wiki/display/blazeds/download+blazeds+4
Few articles which might help you:
http://balajisridhar.wordpress.com/2009/06/06/flash-builder-4-makes-a-new-marriage-proposa l-between-flex-and-java/
http://sujitreddyg.wordpress.com/2009/06/01/building-flex-application-for-blazeds-remoting -service-using-flash-builder-4/
Hope this helps.
Thanks,
Balaji S

PDF Generation with LiveCycle Data Services

Hi everybody!
I am using LiveCycle Data Services to generate a dynamic pdf. I worked with this tutorial : livedocs.adobe.com/livecycle/es/sdkHelp/programmer/lcds/pdfgen_1.html and i adapted the code to my own example.
I created a pdf template with livecycle designer and i succeed to generate the pdf thanks to LiveCycle Data Services.
Here is my problem :
In LiveCycle Designer i create a table and bind my data connection (from xml source) to this table and i bind subforms to repeating data.
It works when i try to open an overview of the pdf with LiveCycleDesigner.
But when i try to generate the pdf with livecycle data service, there is no repeat of my data. There is only a number of items corresponding to the minimum of repeating i set in livecycle designer binding window...
Is it possible to generate repeating data with LiveCycle DS ?
an example of my xml source :
<item id="1">
<data>blabla</data>
</item>
<item id="2">
<data>blabla</data>
</item>
In livecycle designer, if i set the minimum of repeating to 1, LiveCycle DS generate a pdf with only one item.
if i set the minimum of repeating to 2, LiveCycle DS generate a pdf with only 2 items. etc.
I don't know how to generate an indeterminate number of items...
Thanks in advance for your help.
Bye
Guillaume

Hi Guillaume,
there is no limitation. Dynamic PDF files can be generated with Livecycle Data Services.
You should have a look at the XML file generated by your Flex code. Try to save it and see how the XML file behaves when you generate a PDF preview with Designer. You can go to the menu: File > Properties > Preview > Use XML test data...
With the XFAHelper class, you can either load a PDF or a XDP file. Have you tried with a XDP ?
I've attached a dynamic PDF file that I've created for a customer. I generate a dynamic PDF file using LiveCycle Data Services. Maybe you'll find some clues within the file.
Michael

Why would I need to use LiveCycle Data Services in a Flex app?

I cannot figure out what additional functionality is provided by using LiveCycle Data Services in my Flex apps. I cannot get a clear understanding of how using LiveCycle Data Services would benefit my applications. Does someone out there use LiveCycle Data Services? If so, what do you do with it in Flex?
Thanks!

- data push for publish/subscribe implementations
User has to do nothing to get updated information. You push it to their machine when new data is available, like Yahoo finance updated quotes.
- data paging
You don't want to display one million rows in your datagrid at once. Get a batch of data, if the user scrolls down, get the next batch, etc.
- server side clustering
One server does not get overloaded. High traffic sites have their large number of concurrent connections managed more efficiently.
- JMS services
JMS is a powerful technology for messaging throughout an application, and LCDS makes it much easier.
- RTMP tunneling
Allows the use of the RTMP protocol in LiveCycle Data Services applications. Makes it easier to traverse firewalls and proxies appropriately that currently prevent direct RTMP client connections to the server.
If this post answered your question or helped, please mark it as such.

BlazeDS vs. LiveCycle Data Services

I'm a little but frustrated right now because nobody seems to understand what I'm talking about. Not even Adobe nor the reseller. Here's my problem:
I would like to buy the software that BlazeDS is based on. As far as I know, this software is called LiveCycle Date Services or LiveCycle DS. When you install ColdFusion 8, you can install a demo version of it. I also downloaded the trial version (120 days) of version 2.6 (226,619 Kb).
I chatted with Adobe and they told me that the cost is 30,000.00$ for 1 CPU?!? I talked with my reseller and he told me 7,000.00$ for 1 CPU.
I don't think that a 222,619 Kb software that is similar to the free BlazeDS worth 30,000.00$ not even 7,000.00$.
Can someone help me with that? Is it really that expensive?
Thanks.

I understand how this can a bit confusing, but trust that Adobe wants to help you get this sorted out.
LiveCycle Data Services is ultimately targeted at large enterprise deployments for web-based applications that would serve thousands of clients and as such is priced accordingly. We have heavily invested for several years now to make a very unique, highly performant and valuable product for a very small market and as such we priced accordingly and turned the BlazeDS version over to the open source community, ultimately satisfying most of the use cases for free.
It sounds to me like you have a case to take on the full version, and you have a reseller that is apparently willing to leverage the full discount based on your specific use case, and further that you have also gotten a 'stock' answer from Adobe in terms of the LiveCycle Data Services list price. If you would like to speak directly with someone from the product team who may be able to clarify some other options, let me know and I will contact you directly or share my contact information with you.

LiveCycle Data Services for Java EE 4.6 now available

I'm pleased to announce the general availability of LiveCycle Data Services version 4.6. It is the latest update to the JEE or LiveCycle version of Data Services and it is a feature-rich major release, including expanded support for mobile applications (HTML5/JavaScript, native iOS and Java/Google Android), adds an SAP Connector, introduces managed remoting, and enhancements to model driven development and the offline synchronization framework.
For more information check out the following two sites:
Product overview on Adobe.com: http://www.adobe.com/products/livecycle/dataservices/
LiveCycle Developer Center on the Adobe Developer Connection: http://www.adobe.com/devnet/livecycle/dataservices.html
For existing customers with maintenance and support contracts, the Data Services 4.6 release along with Flash Builder 4.6 has been automatically pushed into your Licence Web Site (LWS) account. This includes ADEP/Livecycle V10 customers that have licence rights to Data Services.
Juergen Hauser - Sr. Product Manager - LiveCycle Data Services

This certification is currently being evaluated for upgrade to a new version. At this time, I cannot give a definitive answer about whether or not there will be an EE 6 version. We also do not have any info on retirement of the EE 5 version. I don't expect that this certification will retire terribly soon, as it is still getting a good amount of traffic. I'm sorry, I realize that my answer is not very informative or helpful, but that is the only info I have at this time. If you are interested in this certification, I would recommend that you go ahead and go for it. Even if we do end up retiring the certification path, the certification remains valid. It remains on your list of certifications in CertView and you can continue to use the OCM logo.
If you are worried about getting 1/2 way through the path and having the path retire, I can tell you that we typically provide at least 3 months notice for a retiring exam/certification path. This path may require extra time because of the length of time that it takes to complete this certification path. Whenever this certification path is set to retire, we will make every effort to contact all candidates who are working on the certification at that time, so always be sure that your email address is updated and correct in your Pearson VUE profile.
Regards,
Brandye Barrington
Certification Forum Moderator

Cold Fusion8 instaltion- Reg the service "Adobe LiveCycle data services ES"

What is the purpose of the Cold Fusion8 service "Adobe LiveCycle data services ES"?I am using Sun solaris platform with Iplanet webserver
I don't require any Flash services still is it required to install that service?

Could you tell me what are the basic steps to run the Livecycle on weblogic server? what are the system requirements and prices as per your experience?

Connecting Xcelsius via Adobe LiveCycle Data Services

Hi Gurus,
Can anyone help with connecting Xcelsius dashboard to live data via Adobe LiveCycle Data Services?? Have anybody experienced this option??
I would appreciate if anybody had a tutorial avaible.
Thanks!!!
Jan

Hi,
yes with the limitations of the license (
FAQ
) ... one cpu server , one application , ...
best regards
kcell

Newbie question about livecycle data services es

Hi all.
i've downloaded the LiveCycle ES2 VMware virtual appliance, setup it up on a esxi server, workspace, content space, all are up and running, but here comes my question, how do i install livecycle data services in there?how do i set it up to start working with the rest?
i've read the documentation on how to install, but i'm a bit confused.
can anyone give me any pointers about this?
help would be appreciated
thanks in advance

1) In Workbench ES2 create a process to create a new user. If you need to create a group there is also a service to create group. Create a short-lived process using the Avoka service > Create User operation. The Create User operation has the inputs depicted below.
2) Create a process variable called 'newUserXml' of type 'xml' and declare the variable as input. Ideally, create a schema for the xml.
3) The Create User operation has a single output, a string containing the user ID. Create a process variable called 'userID' of type 'string' and declare the variable as output.
3) Save, check-in, and deploy the process.
4) To test the process, invoke the process from the Workbench. For the input variable, plug data into an xml structure such as this...
<NewUser>
<Login/>
<Password/>
<CommonName/>
<CanonicalName/>
<Description/>
<Email/>
<Initials/>
<OrgName/>
<Address/>
<Telephone/>
</NewUser>
5) If the test succeeds, you are ready to create the Flex application. If not, figure out why.
6) Build a Flex app. Once you deployed the process, the remoting endpoint is automatically created and can be accessed by Flex. Here is a stub.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="initChannelSet()">
<mx:Script>
<![CDATA[
import mx.messaging.channels.AMFChannel;
import mx.messaging.ChannelSet;
import mx.rpc.events.ResultEvent;
import mx.rpc.events.FaultEvent;
private function initChannelSet():void {
var cs:ChannelSet= new ChannelSet();
cs.addChannel(new AMFChannel("my-amf","http://localhost:8080/remoting/messagebroker/amf"));
ro.channelSet = cs;
private function submitRequest():void {
var newUser:XML = new XML(getXmlData());
ro.setCredentials("administrator","password");
ro.invoke({newUserXml:newUser});
private function remotingResultHandler(event:ResultEvent):void {
var userID:String = event.result.userID;
private function remotingFaultHandler(event:FaultEvent):void {
Alert.show(event.fault.faultDetail.toString());
private function getXmlData():String {
var xmlStr:String = "<NewUser>"
+ "<Login>" + login.text + "</Login>"
+ "<Password>" + password.text + "</Password>"
+ "<CommonName>" + commonName.text + "</CommonName>"
+ "</NewUser>>";
return (xmlStr);
]]>
</mx:Script>
<mx:RemoteObject id="ro" destination="MyApplication/processes/CreateNewUser"
   result="remotingResultHandler(event)" fault="remotingFaultHandler(event)"/>
<mx:VBox>
   UI goes here...
   <mx:Button label="Submit" click="submitRequest()"/>
</mx:VBox>
</mx:Application>
Steve

Price of LiveCycle Data Services

Hi everybody
I would like to know the price of LiveCycle Data Services,
even a range of price or an approximative price.
I remember that the price of Flex Data Services was about 10
000 or 15 000 (euro or dollars I don't remember exactly) per CPU.
But with BlazeDS, the price of LCDS may have changed.
Thank you very much
Bonjour
J'aurais besoin de connaitre le prix de LiveCycle Data
Services même approximativement juste pour avoir un ordre
d'idée. A l'époque de Flex Data Services 2 je crois me
rappeler que c'était 10 000 ou 15 000 euros par CPU, mais ca a
du changer avec l'arrivée de BlazeDS.
L'info n'est pas facile à trouver...
Merci beaucoup

Pricing really depends on a number of things, and can range
from free (for Blaze DS) to tens of thousands of dollars.
You can get Blaze DS for free from
http://opensource.adobe.com/
The best thing to do is to contact a sales rep.
http://www.adobe.com/products/livecycle/dataservices/
says that the phone number for sales is 888-649-2990, or
there's a form that you can fill out to have Adobe contact you:
http://www.adobe.com/go/livecycle_rfi_en_us
Mike

Help me about LiveCycle Data Services

Hi all,
   I use Flex 3 and BlazeDS server to write my web app. Today, I want use LiveCycle Data Services ES. I have done some steps bellow and I need some guides continue from anyone.
   1. Download the LiveCycle Data Services ES from adobe home page (ok).
   2. Install it with option is include Tomcat (ok).
   ... what step continue..?
   My project was created with BlazeDS server, and I need place inside LiveCycle Data Services ES that just installed ? Or I must re-create my project with LiveCycle Data Services ES ?
   Please guide to me some necessary steps to use LiveCycle Data Services.
   Thanks very much.

Which file exactly from the lcds samples? I can't find this file in the livedocs nor in the source of the samples.

Problem LiveCycle Data Services with Parsley Framework

Hi All,
I have problem when using LiveCycle Data Services and Parsley framework.
Here is my Dynamic command :
public function execute(message:ServiceMsg):AsyncToken{
                                   return dataservice.fill(...);
public function result(event:ResultEvent):void
     Alert.show ("run successful");
     // call another method
     xyz(); // this method take a long time (about 1 minutes)
The problem here is the alert message not show until xyz() method finished. It's so odd behavior.
Anybody can explain this problem.
I'm using parsley 2.4.0
Thanks,
ndt

Hi All,
I have problem when using LiveCycle Data Services and Parsley framework.
Here is my Dynamic command :
public function execute(message:ServiceMsg):AsyncToken{
                                   return dataservice.fill(...);
public function result(event:ResultEvent):void
     Alert.show ("run successful");
     // call another method
     xyz(); // this method take a long time (about 1 minutes)
The problem here is the alert message not show until xyz() method finished. It's so odd behavior.
Anybody can explain this problem.
I'm using parsley 2.4.0
Thanks,
ndt

LiveCycle Data Services without Flex UI

Is it possible to use LiveCycle Data Services as a backend without Flex/Flash as front end ( any other tech as front end Struts, JSP, JSF etc).
Idea is to get advantage of features provided by Data Services with something other than Flash player as front end?
Thanks
YogLC

Thanks Mete.
If you can please elaborate your thoughts more it will be helpful to me to take certain decisions.
If you can provide some reference or pointer or example on this specific topic that would be great too!
Any Adobe personnel from LiveCycle Data Services Team pl. reply?
Thanks again,
YogLC

Is LC Foundation bundled with LiveCycle Data Services

I recently got this question - Do I get LC Workbench and LC Foundation when I buy LiveCycle Data Services?
The answer is "No".
With LiveCycle Data Services you get:
1. LiveCycle Data Services server - It works with most application server, but ship with a tomcat based turnkey option
2. Adobe Application Modeling Plugin - This is a plugin to Flash Builder 4 that enables to do Model Driven Development of Flex applications. This is "New in 3.0"
Anil Channappa | Sr. Product Manager LiveCycle Data Services and Blaze DS
Adobe Systems Inc | 21-61 Hickory Dr, Waltham, MA 02451-1011
[email protected]<mailto:[email protected]>| 781.839.1331 | myBlog<http://anilchannappa.org/

Hi Guillaume,
there is no limitation. Dynamic PDF files can be generated with Livecycle Data Services.
You should have a look at the XML file generated by your Flex code. Try to save it and see how the XML file behaves when you generate a PDF preview with Designer. You can go to the menu: File > Properties > Preview > Use XML test data...
With the XFAHelper class, you can either load a PDF or a XDP file. Have you tried with a XDP ?
I've attached a dynamic PDF file that I've created for a customer. I generate a dynamic PDF file using LiveCycle Data Services. Maybe you'll find some clues within the file.
Michael

AdvancedDataGrid compatability with LiveCycle Data Services

Hi,
I have a J2EE project which I have integrated with Flex3,
using the setup provided by your samples.jar in the LiveCycle data
services download - e.g. copied the data from web.xml,
flex-config.xml etc.
Every thing works fine until I put an AdvancedDataGrid
element into a page. I get the error:
Could not resolve <mx:AdvancedDataGrid> to a component
implementation.
I resolved this by copying over the datavisualization.swc
into the libs folder of my app. However then I got the error:
unable to load SWC datavisualization.swc
I then copied over the jars provided by Flex3.0 into the
WEB-INF/flex/jars section of my project, overwriting any old ones
provided by LiveCycle Data services sample. I also updated
flex-config.xml to provide a
<locale><locale-element>en_US</locale-element></locale>
element..
Then, when trying to load the page i got: the following
error:
Exception java.lang.NoSuchMethodError
flex2.compiler.CompilerSwcContext
This is method exists in the old mxmlc.jar file that i
overwrote with the one provided by Flex sdk 3.0 and it is called
from the flex-webtier.jar provided by LiveCycle Data Services.
Am I right in thinking I can't have an advanced data grid at
the moment? Or do i need a different flex-webtier.jar?
Thanks
Matt

Hi,
Could you please file a bug on
http://bugs.adobe.com/flex/
in which you describe your configuration and your installer
settings. Please attach your .log file as well, which can be found
in [your Workspace]\.metadata\.log .
Thanks,
Catalin

Only LiveCycle Data Services 2.6 or higher is supported in this version of Flash Builder.

Similar Messages

Maybe you are looking for