Only Momentary Menu Operation

I rushed to complete a short DVD project for some family members for a relative who just passed away suddenly. I was in a pretty big hurry getting ready to leave town for the services when I noticed an odd occurance checking the project after burning it. In Encore, the opening menu and all buttons look and play normally in preview mode inside Encore. Oddly, when the DVD was burned, I noticed that only for a fraction of a second, immediately following the main menu load, is the menu active so that the default button could be selected. The defualt button is highlighted for only a fraction of a second then is becomes un-highlighted at which point no buttors will work. The only way that the default button could be selected (this button was linked to the playlist so that the entire DVD is played) was to contiune to hit the "enter" or select button on the remote as the menu loaded. Otherwise, no selection is possible.
Routing and assignments look and work normally in Encore.
Any suggestions where to look? The DVD is very short-- with content only about 400 Mb. It was only to serve as an example but only being able to select the default button and only by repeatedly hitting the "select" button on the remote was sort of embrassing and frustrating.
Any assistance is very much appreciated!
Thanks

Hunt,
Thanks so much for the reply. Oddly, this problem seem to be related to a defect that developed in the menu. What I did was to add a new menu and rebuilt it from the existing assets of the original project. I then made a DVD but used the folder output so only the DVD files were created. I played that back using a software player (cyberlink in my case) and the menu items worked fine. The original menu that had the initial problem showed up in the cyberlink player as bad as well. Once the new menu worked in cyberlink, I simply concluded that it was fixed but the cause remains unknown but I don't like that kind of solution for obvious reasons.
The auto activate button is interestingI always wondered about that. It seems that this is on by default but maybe not, I don 't have Encore open at the moment. Button 1 is by default the first auto-selected button but that's not the same as on that auto-activatessomething to keep in mind.
Thanks again so very much!!
Jerry

Similar Messages

Why is my hard drive full when I only have the operating system loaded and nothing else? No pics, music, nothing...It's the 60 Gig hard drive on the air built in late 2010.

Why is my hard drive full when I'm only running the operating system and nothing else is loaded? No music, pics, nothing! I understand the hard drive is small at 60 gig, but I can't believe the os would take up that much space.

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free on the startup volume for normal operation. You also need enough space left over to allow for growth of your data. Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space. Proceed further only if the problem hasn't been solved. ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root. Back up all data now. Launch the Terminal application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

"Invalid menu operation" Alert bug - CS6

CS6.0.5
In the last couple of weeks I have started getting this alert:
I have tried to pay attention to what I have do to create this alert.
Occasionally it simply appears on opening a Project.
Reliably, it pops up when I hit Ctrl > z (undo), and Ctrl > s (save)...
but after clearing the alert, Ctrl > [Anything] does not make it reappear.
This happens regardless of the Project.
edit:
I have just discovered that if I try to use File > Save
instead of Ctrl > s to save, the alert appears
as soon as I touch the File Menu header.
This also happens with the Clip, Title, Window & Help headers.
As in the replies in the thread below, there seems to be
no detriment to any functionality when this alert appears.
Maybe it's a fairly inconsequential bug, but it does appear to be a bug.
I had worked in CS6 for almost a year without this alert occurring.
Invalid Menu Operation Error in CS6
http://forums.adobe.com/message/4913886

Even if this errant "Invalid menu operation" alert is not
indicative of any real problem and does not seem to cause
any functionality problem within Premiere, it is still an obtrusive
alert that requires the extra steps to clear (at least once).
If not cleared, any 'real' alert would be missed since
all it will do is add a new entry to an un-cleared list.
Any suggestions aside from filing additional bug reports?

Invalid Menu Operation Error in CS6

Recently, I've been seeing the little error indicator show up at the bottom-right corner of the Premiere screen after I import a file. When I click on it, the error listed says, "Invalid Menu Operation". I haven't noticed any negative effects from this, but I was wondering if anyone knows what it means.
Thanks.

hi
i don't think that is fair you reply as you don't find any issue as we report!!!This unacceptable!!!
i'm using premium production cs6 everytime when i open files and click to FILE/CLIP/TITILE/WINDOW and HELP menu button the error message will come out immeadiately than after clear all it will be ok but it will appear everytime when we first launch the project file?!
Please take note: when click the menu EDIT/PROJECT/SEQUENCE and MARKER that is ok no error message appear!
we paid for the software is because we trust it , we are not paying for trouble!!! this is a problem giving us when we working we don't know it will affect any of our project or not?
ADOBE engineering team should find out the problem!!!
the problem doesn't drop from the sky itself!!!??? Do you think we created the problem????
Here is my system detail!
i'm using WIN7 OS, nvidia Quadro 4000, DELL T5500
AND BELOW IS THE ERROR REFERRENCE
PLEASE DON'T GIVE US THE SAME FEEDBACK AGAIN THAT MUST BE SOMEWHERE GOES WRONG! PLEASE SOLVE THE PROBLEM THANK YOU!
my email address is [email protected] or [email protected]

Implementing menu operations such as open, save & save as

hi all,
i am interested in implementing file menu operations such as open, save as, save etc...
any resources that show actual implementation is appreciated

Don't crosspost. It's rude and unappreciated.
http://forum.java.sun.com/thread.jspa?threadID=590529&tstart=0

Bug: Context menu operations on multiple selection of uix-nodes do not work

Hi,
when i select multiple .uix files in the navigator and then chose "Check XML Syntax", "Validate" or "Auto Indent XML" from the context menu, the selected operation is only done for the first file in the selection.
This is a nice Bug because this works for Make and Rebuild context menuitems, even if those items display the filename even for multiple selection ("Make AFile.uix).
Would be nice if those operations would work on the "HTML Sources" node or a subfolder.
Regards, Markus

thanks. we'll try to fix this in an upcoming release.

How to block the Form Settings for Main Menu to use ONLY "My Menu"?

Hi everyone:
Our customer wants to define an User Menu (My Menu) for each B1 user within the company and restrict the Modules at main menuu2026
How can I block the Form Settings for the Main Menu?... It is possible to give an user Only access to My Menu and denied Authorization to the Modules?.
I appreciate your help!!. Thanks very much
Claudia Gutiérrez

Hi,
'My Menu' refers to the third tab on the Main Menu, and the
authorization of 'Organize My Menu' works as below:
- Full Authorization: Allows the user to access the Organize User Menu
window (Tools -> User Menu -> Organize) and customize the menu.
- No Authorization: The user cannot open this window.
Check the Note [1062635|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1062635] if you are looking for it.
Regards,
Jitin
SAP Business One Forum Team

How do you fix the date (day number only) in menu bar to match correct Date and Time Preferences?

My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011". The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct. Is there any easy fix for this? I don't know if August will change to September, but the day of the week has kept up with time!

I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!

How to quickly switch between speech bubble and highlight text in pdf viewer in Maverics. Can now only use menu to change to speech bubble in Maverics (Tool Icon gone since Lion and no shortcut listed)

I use Preview to mark up student assignments, switching between the speech bubble and highlight markup tools. The speech bubble is not on the toolbar since Maverics upgrade. It also have no shortcut, which means navigating the menu every time since the Text shortcut, under which the speech bubble is now located does not remember the previously selected item and always reverts to plain text.
From a usability point of view, for me this is a massive step backward since the Lion version...
Or is there some hidden magic that will let me switch between these tools without having to navigate the menu everytime...
Neal

100% agreed with this. The new interface is far too bulky, Even on my gaming computer's massive 21inch monitor, it's nearly impossible to keep up with my chat group of 23+ people. I constantly have to scroll back up to read messages, making it furstrating and inconveniant. And now that the update is being forced on all of them, they're complaning of the same issues. Like said previously, these are full computers, Not bloody tablets or cell phones, but even then the new skype's even more useless on my Venue8 Pro tablet, I get to see a whole 3 messages at a time (And don't get me started on the Win8 Skype app). And what made it worse, MS has removed all previous versions of skype from the internet. THEN even when I managed to get my hands on an old version, I can only log it in once before it kicks me off and gives me a worthless error message, "Skype Can't Connect". (But seriously, what happened to giving us error codes guys? Advanced users like myself want to be able to fix the issue ourselves!) MS, I'm sorry but, you need to stop fixing things that are not broken. I'm wasing my time trying to correct this now, and I really don't apreciate that. What happened to quality control and testing?

Only the menu bar is showing with Firefox, have Mac OS X 10.7.3, started yesterday, apparently randomly, or was it those pesky meddling kids? how to retrieve whole page?

Only menu bar is coming up when I use firefox. Started apparently randomly yesterday but children may have interfered with it.
Want full page back so I can use it. Sorry if this a massively obvious question but can't seem to solve it. All help greatly appreciated.

Try to remove the Firefox plist file (org.mozilla.firefox.plist).
* http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results
Go to "~/Library/Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist)
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Troubleshoot is the only Help menu item that won't open and makes FFX hang even after reset

Trying to solve why there's no sound with You tube, I headed for Help and troubleshoot. Every item on the Help menu opens, except troubleshoot. I didn't find "Help" in safe mode, so couldn't try it there.
Reset Firefox and trouble shoot still won't open.
And anything you add about the sound will be appreciated. It seems to come and go for reasons of itw own.

Does the troubleshooting information page open if you type ''about:support'' into the address bar and press Enter?
As for the sound issue,
# Open the Windows volume mixer and make sure the global sound level is appropriate, as well as the sound level for Adobe Flash Player and Firefox. Only running applications show up in the volume mixer, so you first have to open a Flash video in Firefox to change the volume level for Flash Player.
#* [http://windows.microsoft.com/en-US/windows7/Adjust-the-sound-level-on-your-computer Adjust the sound level on your computer | Microsoft Support]
# Close all tabs in Firefox, then clear the cache.
#* [[How to clear the Firefox cache]]
# Delete cookies from youtube.com, ytimg.com and google.com
#* [[Delete cookies to remove the information websites have stored on your computer]]
# Delete all Flash cookies as follows.
## Press the Windows logo orb on the taskbar and click Control Panel.
## In the Control Panel search box, type ''flash''
## In the search results, click "Flash Player (32-bit)"
## Click the Storage tab.
## Click the Delete All button.
## Check "Delete All Site Data and Settings", then click the Delete button.
# Open the following video link. Right-click the video. Does the context menu have an "About the HTML5 player" item in it? Adjust the volume in the YouTube player. Can you hear any sound?
#* [http://www.youtube.com/watch?v=XSGBVzeBUbk&html5=1 Big Buck Bunny animation]
# Open the following video link. Right-click the video. Does the context menu have an "About Adobe Flash Player" item in it? Adjust the volume in the YouTube player. Can you hear any sound?
#* [https://www.youtube.com/watch?v=MGR4U7W1dZU Bastille - Things We Lost In The Fire]

TestStand Error only when using Operator Interface

My testStand sequence runs correctly when I run it from the seqEditor, but when I run it from our Operator Interface (modified version of the simpleOI example), I get the following error,
"Error Message: Parameter 'Input Files': System Level Exception. [Error Code: -17502]
Input Files is a parameter of the LabView vi being called, and is an array of strings. The VI executes correctly even when called fromthe OI, but when it returns to TestStand (when called from the OI) the error occurs.
Thanks for any info and help on this. Also any info on why the simpleOI would cause an error would be appreciated too.

Hi Ray,
Here are some answers to your questions.
This VI that error's, is it part of the simpleOI or part of the Sequence File being run by the simpleOI?
---- The VI is part of a sequence file that is called by the OI.
If it is in a Sequence File, does this run in the default OI?
---- No, it's part of a new set of test sequences for our equipment.
What does the simpleIO do with the data contained in Input Files?
---- The data is just passed to another VI to load our input vectors.
What version's of TestStand and LabVIEW are you running.
---- I believe it's LV 8.5.1 and TestStand 4.0
What sort of modification have you done to the simpleOI example?
---- I think we only added our new sequences, a Operator info popup, and a few more buttons (Pass/Fail light, Change Op Info). And we removed some unused code to make it more simple.
Thanks again for your help.
Billy

Only cloning the operating system.

I've created clones of my hard drives before, using carbon copy cloner. but are there any utilities that clone only the essential files and folders that are needed to boot? Or do i have to install from an installation CD to do that. Completely cloning a system takes a long time and I'd like to find out a way to clone just the operating system and the necessary files for it to work.

Hmm. The SuperDuper! documentation says:
Backup – user files is similar, but it does not create a bootable backup.
Instead, it only backs up user specific files in the Home directories of the
various accounts on your system (as well as the special iSync files that are
stored elsewhere in Panther). This type of backup is not bootable, since it
doesn’t contain operating system files, but is useful for storing copies of your
personal data. It’s much harder to recover from a disaster if you’ve only got
your personal files backed up.
Is there any kind of program or option where it only copies operating system files, as i want to cut down on the time needed to create a clone. I usually keep my files somewhere else so if i have a bootable drive, I can copy the files from another drive. Unless SuperDuper! does a much quicker job of it than CCC. It took CCC around 4 hours to completely copy my drive, which had around 140GB on it. Maybe the huge amount of space taken up might've contributed to the relatively slow processing.

Menu operation error, CVI5.5 in Win2000

Hi, everyone!
My environment is LabWindows/CVI version 5.5 patch 1 under Win2000.
I have problem to use menu, Ring menu etc.
If I have use that operation, the application is down.
How could I do, please?
Thanks for your help.
Chang-won, Heo

hi
i don't think that is fair you reply as you don't find any issue as we report!!!This unacceptable!!!
i'm using premium production cs6 everytime when i open files and click to FILE/CLIP/TITILE/WINDOW and HELP menu button the error message will come out immeadiately than after clear all it will be ok but it will appear everytime when we first launch the project file?!
Please take note: when click the menu EDIT/PROJECT/SEQUENCE and MARKER that is ok no error message appear!
we paid for the software is because we trust it , we are not paying for trouble!!! this is a problem giving us when we working we don't know it will affect any of our project or not?
ADOBE engineering team should find out the problem!!!
the problem doesn't drop from the sky itself!!!??? Do you think we created the problem????
Here is my system detail!
i'm using WIN7 OS, nvidia Quadro 4000, DELL T5500
AND BELOW IS THE ERROR REFERRENCE
PLEASE DON'T GIVE US THE SAME FEEDBACK AGAIN THAT MUST BE SOMEWHERE GOES WRONG! PLEASE SOLVE THE PROBLEM THANK YOU!
my email address is [email protected] or [email protected]

Only last pm_order operation in 0PM_DS04_Q0021 query?

Hi Experts,
When I execute query 0PM_DS04_Q0021 - Outstanding Order List,which runs
over the DSO 0PM_DS04 - Maintenance Orders, Operations and Costs, I
expect to have actual and planned time by order, but for all operations
that occur in that PM order.
I went over some PM orders on IW33 transaction code in R3 system and I
compared it to query results in Business Explorer Analyzer.
After a few records I got to think that BW is just geting the actual and planned time for the last operation for that order.
Can you guve me a hint on how I can solve this?
Thanks in advance for your help,
Best Regards,
André Oliveira

Hi Experts,
When I execute query 0PM_DS04_Q0021 - Outstanding Order List,which runs
over the DSO 0PM_DS04 - Maintenance Orders, Operations and Costs, I
expect to have actual and planned time by order, but for all operations
that occur in that PM order.
I went over some PM orders on IW33 transaction code in R3 system and I
compared it to query results in Business Explorer Analyzer.
After a few records I got to think that BW is just geting the actual and planned time for the last operation for that order.
Can you guve me a hint on how I can solve this?
Thanks in advance for your help,
Best Regards,
André Oliveira

Only Momentary Menu Operation

Similar Messages

Maybe you are looking for