Only one angle is playing in multi clip sent back to FCP from Color

2 camera Multiclip edited and rendered in FCP 6, sent to color, played ok after color adjustment.
Rendered in color, and sent back to FCP; second angle in the clip is blank (black).
tried different settings in color prior to sending, same result.
The multi clip plays ok in FCP prior to sending to color, and plays ok in color prior to sending to FCP.
Any idea what is being missed here to make second camera show?

The fix you can try is to Media Manage the project exporting the active Multiclip selection as independent. With that, you might even be able to create a new COLOR prj and import color corrections, so not much repeated labour.
jPo

Similar Messages

Sending back to FCP from Color no clips no sequence

So I am sure i am missing the blindingly obvious but would appreciate some help.
I am new ish to color but have read the manual and taken the Macpro video 1.5 training DVD to try and get up to speed.... Here is my problem:
I am sending a multiclip sequence to color (1080i pro res render). The clips appear in color and i am able to grade and render all OK.
When i send back to FCP i get a new sequence and new bin labeled with the clips.
however the sequence is empty and the bin contains a bunch of off line media. I can locate the new clips using finder but they are roughly 4 times the size of the original....
Any help appreciated

What version COLOR? Multiclip is advertised to be functionally supported by COLOR 1.5, but it is not supported in any previous version. I am not familiar with the MacPro training DVDs, so I'm not assuming that it is tied to the current version.
When you say that they "render all OK"... are you sure about that? Why are the new clips about 4x the size of the original? That doesn't register as "OK" with me....
It could be a codec issue (doubt it) and it could be a speed remap issue (why not compound a known problem with another one?) and then it could be a renderqueue misdirection...
jPo

Audio Channels. Only one channel is playing

For some reason only one channel is playing a signal on a couple of clips. The other clips are fine.
All I did to the clips in question was increase the DB levels.
How can I adjust it so that I get signals on both audio channels?
Thanks

duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

What do I do if someone is hacking into my Game Center so I can't play clash of clans anymore because only one person can play at one time?

What do I do if someone is hacking into my Game Center so I can't play clash of clans anymore because only one person can play at one time? I changed the password but soon discovered it didn't help. I want to play Clash of clans but every so often the person comes back on. is there a way for Game Center to log off all the accounts, so the hacker will be gone?
Please help me with this problem

Your iPad can be hacked only if it's been jailbroken. Has it?

I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong

I have 2 email addresses on the phone. How come only one accepts a alert tone. When I receive an email from 2nd email it does not notify me of its arrival. What am I doing wrong?

Each email account can have its own alert or notification settings.
Settings > Notifications > Mail > tap on each account and set the alerts you want.

Only one angle visible and no audio audible in multicam clip

Two source media clips are ProRes and one is AVCHD. Creating the multiclip seems to work in so far as making a clip with 3 camera angles in it. But only one camera angle's picture is actually visible; the other two are black frames. No audio is heard at all. All 3 source media clips have audio and that's how I synched them. I can't see any audio waveforms in the multicam clip in the sequence. With the multicam button activated, I can make the yellow rectangle move around as though something were there, but no picture. In the multicam creation dialogue, I chose track 1 audio for synch and camera 1 to be my audio source. I am using the latest version of PP CC.
I saw a long thread from June/July 2013 discussing a similar problem, but that supposedly has been fixed. What is happening here? I exported a Final Cut Pro 7 project with 2-angle multi-clips in it, imported that XML file into Premiere and the multiclips worked fine. This is a different project, but I have no idea why this is not working. The answer is not in the instructions.

I do wish the PDF would include the original, manual method of multicam sequence creation, preferably as the first option, as that method still works just fine and often works better than the 'auto' methods now hyped.
For interested readers, here's the process:
1. Create a sequence.
2. Add your clips.
3. Sync them up.
4. Create a second sequence.
5. Nest the first sequence into the second.
6. Right click that nested sequence and select Multi-Camera>Enable.
A very simple process that works every time.

Only one iTunes song plays during DVD slideshow

I have built a slideshow in iDVD6 that's about fifteen minutes long. I added four purchased iTunes tracks, grouped in a playlist, into the audio well in iDVD. The Project Info shows the four tracks.
Only one track plays, however, on the burned DVDs. It repeats itself several times until the slideshow is finished.
In reading other posts about audio, I've noticed that too little available space on the drive with the project can sometimes make iDVD a bit wonky.
I have about 15 gigs available - could that be causing this problem?

15GB should be sufficient, although more always is better.
On the chance that some preference or permission is corrupted, try the following standard stuff that we do when an iLife program is acting weird: Close iDVD and trash the file com.apple.iDVD.plist found in User/Library/Preferences. Then do a permissions repair using the Disk Utility app on your Mac.
If that doesn't solve it, as a workaround you could try joining the songs in your playlist into one total soundtrack. You could do this by putting your playlist into an iMovie project and then exporting your playlist onto your desk top as an aiff file. (File/Export/Expert Settings/Share/Sound to aiff) Then import that file directly into your iDVD project, or into iTunes and from there into your iDVD project.
Another way is to export your playlist to a musical CD, and then import all the songs at once from the CD back into iTunes, checking the "Join CD tracks" option on the iTunes Advanced menu. That will join all the tracks into one long clip.
Perhaps someone else will come up with a better suggestion. Good luck with this.

Difficulty with SF2 files containing multiple sounds; only one sound will play

Here's my difficulty. I know exactly how to install SF2 soundfonts on my computer, I have used them in several compositions, but there's one limitation I havent been able to overcome.
Some soundfonts, as you probably know, contain multiple sounds. My problem is that when I have a multi-sound SF2 selected, I can only get GarageBand to play one sound -- presumably the first one in the pack. There are no options in the DLS Music Player window for selecting other sounds within the soundfont; only the soundfont itself is listed. I have a couple of soundfont packs where the different sounds are all split into individual SF2s within a folder, and that displays as a submenu properly... but I can't get these others to work properly. Any ideas?

I don't think you can get it to work with the current version of GB. There used to be a plugin called SoundFontSynth that handled soundfonts with sound banks, but it has been discontinued and the auther never replied to emails.

When I choose an album to play in my itunes library, only one song will play and then itunes stops. Also, when I click on next, itunes just stops playing.

When I choose an album to play in my itunes library, only one song plays and then itunes stops. Also, when I click on the next button, itunes stops. How can I play an entire album through without stopping after each song?

Sounds like you have accidentally unchecked all items. In the Songs view ctrl-click on any empty checkbox.
tt2

HT3775 I have a webpage where I embeded more than 2 quicktime players. I want that at a time , only one player is played. When second player is played the first one should stop. I am using simple EMBED / OBJECT tags to embed the player.

I have a webpage where I embeded more than 2 quicktime players. Only one player need to play at a time. When second player is played the first one should stop. I am using simple EMBED tags to embed the player.

I have a webpage where I embeded more than 2 quicktime players. Only one player need to play at a time. When second player is played the first one should stop. I am using simple EMBED tags to embed the player.

Color Changing Clip Aspect Ratio When Sent Back To FCP

Color... Love it...BUT...
When I send my sequence from FCP to Color, grade it, then send it back, the aspect ratio of all the clips is changed to 6.67.
I only corrected our new TV shows teaser so I was not to concerned with having to go into the motion tab in FCP to change each clips aspect ratio back to 0. However, I will grade the whole 80 minutes tomorrow and I don't have time to change each clip back.
In color I only change the Primary In.
Did not mess with the geometry.
I have the latest update.
And I have no clue....
Any help would be great.
Peace

Yup,
Like Fearless I find its best to not have FCP do the anamorphic squeeze. I never tag anything as anamorphic and just do it on the monitor. At the end of the project I'll nest into a timeline for output and do the squeeze there.
If everyone on this thread goes from within Color:
Color > Send Color Feedback
Please log this bug. The more of us that complain, the quicker they'll fix it. And this one is a killer.
- pi

Only one song is played at time

My 80GB iPC only plays one song at a time then it resets by showing the Apple Logo Screen and then to the Main Menu. This happens when I try to listen to a playist, album, etc. Sometimes I can skip to the next song and sometimes when i try to skip, it will reset again. What's going on?

Anybody else with the same issue?

Levels sent back to Premiere from Audition higher / clipping

I am editing a multitrack sequence in Premiere CC and sending it to Audition CC for audio cleanup. I need to run an Match Volume to get the audio up and it works fine. The metering shows average around -8,-6 db and peaks no more than -3 db. However, when I send it back to Premiere, the levels are higher and blowing past 0 db on multiple locations, causing clipping of course. The levers are higher in Premiere than they are in Audition. This makes absolutely no sense.
I have found this discussion below and tried the solution, but it had no effect on my issue. I am not using a compressor on my audio, so maybe this is why it didn't work.
http://forums.adobe.com/message/4182747#4182747
Any suggestions? Thanks.

There is a difference between sending individual clips to Audition, and sending a sequence. When sending a clip or clips to edit in the Waveform view, Premiere first performs a render and replace in its own timeline, generating a new wave file. When you edit and save that wave file in Audition, it automatically updates the clip in the Premiere timeline since Premiere is referencing that new, shared file.
However, when sending a sequence to Audition, the original Premiere timeline is left untouched. New clips are generated by Premiere, based on the clips in your timeline, and imported to Audition as a multitrack sequence. However, when working in this mode you are working on an entirely separate project and what you send back to Premiere is fully rendered stems - one or more fully mixed wave files that get placed on their own audio track in your Premiere sequence. Once these stems are back in Premiere, you can mute the original audio tracks as the new audio file is the synchronized and mixed audio.
It can get more involved if you wish. You can configure your Audition session with busses and route your audio channels through those, then send each Bus output as a separate stem to Audition. You may want to do this if you anticipate offering multiple dialog tracks in your final video, but plan to have music and atmosphere tracks remain the same. You can also send each track in Audition back as a separate stem, which would allow you further control in Premiere or reduce the risk of sync problems if you need to make an edit to the video afterward.
If you're still having troubles, please describe the exact series of steps and menu commands you are following and we can see where the trouble may be.

Is there a way to add Handles to clips when "send to (and from) color"

Hi all. Here is the reason i want handles.
After you finish your (draft) project you grade it in color, then the client comes in and approve it or makes some changes. But then i have no handles to play with if there are any changes.
thanks
Andre

I actually did read the entire color manual 2 months ago and have done 2 projects on it so far. But obviously i didn't remember every little thing.
The setup room you revered to is actually the room where you browse your files on your MAC etc. But i understand why you said that because you have to be in the setup room to be able to go to the project settings room. Thanks for your help Zebulun. I did go to page 102 and it solved my problem. The reason i couldn't find the "handles" setting is because its (for some weird reason) under the broadcast safe tab. And i didn't bother looking there.
Thanks again
Cheers

Only one music video purchased from itunes is not playing on IPod

I purchased several music videos from itunes and they all seem to sync to my ipod just fine but one of them will not play. The other three I purchased is playing fine both visual and audio but only one will not play at all. When I click on it, the screen just goes black and after several seconds, returns me to the menu listing the name of the video. It plays on my daughter's ipod just fine and we both have the same IPod. I've tried to re-sync and reset but nothing seems to work. Can someone please help me. Thx!

It may be an authorization issue. Both iTunes and the iPod need to be up-to-date.
Usually, you need to play at least a part of songs purchased from the iTMS within iTunes to authorize them. They won't copy to your iPod until you do this.
How to transfer Purchased Music from iTunes to your iPod
iTMS Song and Computer Authorization
If you've played & authorized them in iTunes and they still skip, try this. De-authorize the computer in iTunes/Advanced menu, then re-authorize it. You re-authorize it by playing one of the songs purchased from the iTunes Music Store within iTunes. It should ask you for your Apple ID and password, and then the computer will be authorized again. Sync your iPod with iTunes, and those songs should play on the iPod once again.
Another common cause of this is not having the latest version of iTunes.
If you are using the latest version of iTunes (6.0.4), then you need to make sure your iPod software is up to date also. Get the iPod Updater software, install it, run it and update your iPod.
When you have done this, authorize your music in iTunes by playing a few seconds of it within iTunes, re-sync your iPod, and it should transfer by whatever synching method you choose.
If the above 'standard' fixes did not help, then it's a bigger problem that I can diagnose...

Only one angle is playing in multi clip sent back to FCP from Color

Similar Messages

Maybe you are looking for